Remote server in DW does not work
Local view in DW works but the remote server does not work.
A dialog box indicates that "an FTP error occurred cannot connect to the host. Please let me know how to understand it.
You set your server settings remote instructions of your web host?
Do you have your perform a connection TEST? See screenshot.
As Jon said, sometimes you will need to enable/disable the FTP mode passive power.
Nancy O.
Tags: Dreamweaver
Similar Questions
-
I work in the field environment.Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).but it runs on the Windows XP computer.For example:-Inventory.exe (work), Sales.exe (does not work)Help, please.
Hello
I suggest you to ask your question at the following link.
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/
I would also ask you to contact your IT Department for further explanations.
-
Windows Server Update service does not work after the installation of KB2720211
I have a Server 2008 SP1 32-bit Standard, which had the role of Server Update for the Windows software installed connected to a WSUS upstream server and everything worked, with 17 clients connected to him and get everything their approved patches. It was a new server starting with WSUS added at this time 1 months ago. He had to be upgraded to SP2 S2008 which I did and WSUS have continued to function. After being on SP2, there was another 152 patches to be applied and after that WSUS does not work anymore. It appears 1 patch that has been applied has been KB2720211 that seems to cause problems for a number of people.
The problem is that the update service does not start. An error message comes back that the service has not responded in a timely fashion and I can't find the log files anywhere on what it is. Here is what has been done so far all that in the same issue:
1 deleted WSUS and restarted and installed it again.
2 Remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).
2.1 install SQL Management Studio and logged to an internal database SUSDB and checked it is not set to single user (I believe it is set for multiuser name but I'm going from memory)
3. install the KB2720211.
4. installation KB2734608
5 remove WSUS and Windows Internal Database, restarted and installed it again (using the download of KB972466).
I am looking for any information on how to solve what is the question, because there is nothing in the log files I can find and no event in the windows event viewer. I am ready to start with the server however if there is something I can look at to possibly solve the problem, please let me know.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
File server for Windows does not work after security update
I just upgraded the security update that was released last week and all of a sudden the computers windows cannot access the server. I'm under 10.11.6 and everything was great until we started windows computers today. They can ping and access the internet, but they cannot access SMB on the server.
Macs have no connection problems in the SMB and AFP.
Any ideas, what has changed? Users of server are all still there and it seems like it should work. I can access the web page of servers too.
Make sure you are including the domain in the user name when signing in. for example USER: groupe_travail
Also, check that your windows machine has the correct set of LM compatibility level. For El Cap servers must be set to 3.
Follow the instructions below to change the Windows security settings to allow Windows SMB connections.
- Click on the Start button and in the bottom search bar, type regedit . Select search results regedit and the registry opens.
- Using the folders on the left side of the screen, navigate through the tree to the following location: \HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
- In the right window, find the following DWORD value: LmCompatibilityLevel . If it exists, double-click it and set the value to 3 (in decimal). If it does not exist, right-click in an empty space in the right part of the window and create a new DWORD value called LmCompatibilityLevel and set its value to 3 (in decimal).
- Restart the computer.
- Re-try to connect to the server via the workstation.
NOTE: The versions Home of windows may not the ability to set the LM, and unfortunately I have not found a way around that.
-
Evaluation of the VHD Lync 2010 program
I'm quite new to Lync and I'm trying to understand how it all works. I downloaded the virtual computer files and got successfully throughout the environment, but now, I would like to have a client on my PC to communicate with the Lync server but I'm not having any luck.Here are the servers that I have:DCExumLync-QmsLync-SeSPS2010These are all in an internal network and I gave the Lync-SE server outside access, assuming that it's the server that my client needs to communicate with because he runs the Lync server. Initially, I was getting a certificate error. I exported the certificate of the server DC, installed on my client and the client toward the DC server who gave me the certificate number, but now I get an error that the server is temporarily unavailable. I'm far from base here?Hello
Thank you for visiting the Microsoft answers community site. Your question is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.
I hope this helps.
-
WAMP Server installs but does not work on Windows 7 Professional. Why?
To prepare my computer for Web construction and necessary for installing Wamp Server. Installed, it does not run. the office bar icon don't change from pink to green.
Since your message clearly has nothing to do with your comments on the web site of Microsoft Answers, I left it the Feedback forum on the forum of "Programs" of Windows 7.
If you have problems with wamp, you do not ask the wamp forums would be more productive? http://Forum.wampserver.com/list.php?2
-
Remote user VPN IPSec does not work
Hello
I'm trying to configure a remote IPsec VPN on a Cisco router user 1921 but it doesn't work for some reason I don't understand. Does anyone have an idea? I forgot something?
Thank you in advance for your help!
This is part of my configuration:
AAA new-model
!
local AuthentVPN AAA authentication login
local AuthorizVPN AAA authorization network
!
AAA - the id of the joint session
!
username password xxxxxx xxxxx 0 0 encrypted
!
crypto ISAKMP policy 1
BA aes 256
preshared authentication
Group 5
life 3600
!
ISAKMP crypto client configuration group vpnclient
key XXXXXXXXXXXXXXXXXXXXXXXX
DNS 192.168.0.254
GVA area. INTRA
pool IPPoolVPN
ACL 100
!
!
Crypto ipsec transform-set esp - aes esp-sha-hmac T1
tunnel mode
!
crypto dynamic-map 10 DynMap
game of transformation-T1
!
list of authentication of crypto client myMap AuthentVPN map
card crypto myMap AuthorizVPN isakmp authorization list
client configuration address map myMap crypto answer
card crypto myMap 100-isakmp dynamic ipsec DynMap
!
interface Dialer1
MTU 1492
the negotiated IP address
IP access-group RESTRICT_ENTRY_INTERNET in
NAT outside IP
IP virtual-reassembly in
encapsulation ppp
Dialer pool 1
Dialer-Group 1
PPP authentication pap callin
PPP chap hostname xxxxxxxxx
PPP chap password 0 xxxxxxxxx
PPP pap sent-name of user password 0 xxxxxxxxxxxx xxxxxxxxxxxxxx
crypto myMap map
!
IP pool local 192.168.10.0 IPPoolVPN 192.168.10.253
!
overload of IP nat inside source list 110 interface Dialer1
!
access-list 100 permit ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255
access-list 110 deny ip 192.168.0.0 0.0.0.255 192.168.10.0 0.0.0.255
The conflict will be terminated and should be avoided. It might work if you disable split-mining and road, all via the VPN client...
Ideally business networks should not use 192.168.0.0/24; 1 or 2 either since they are common in home routers... you can also have them change their home network easily
Patrick
-
[CS4 Server Win]: Plugin does not work on Windows Server 2003?
Hello
can anyone help?
My plugin works on Windows XP and Windows Vista.
On the two operating systems, the methods of scripts are visible in ExtendScript Toolkit and can be called by javascript.
On Windows Server 2003 that my plugin is not running, the script methods are not visible in ExtendScript Toolkit!
What is missing?
Thank you
Alois Blaimer
Looks like you are using a compiler more later-than-recommended that refers to a later-than-recommended runtime library that is not included in the OS and/or InDesign.
Either:
- Use the correct compiler
- Discover the missing library and install it
- twist the compiler to use the correct library
(I would recommend against 2) and 3) because these hacks tend to break.
For example if you delete something through your runtime lib that has been allocated by InDesign through competitors runtime lib, you could screw up memory management.
Dirk
-
Remote access vpn Wizard does not work?
I have a brand new ASA 5505 running version 8.2 (5). Am connected with the ASDM and run the installation wizard and the VPN remote access Wizard. I am not able to ping the external interface of the internet, and my VPN client gets no response when you try to connect. Config is attached. Any suggestions?
Hello
1.), you need the default route for the SAA to be able to send traffic to the VPN connection initiator
2.) I guess that is something done by hand when to create the basic configuration of the firewall, OR maybe the Startup Wizard would handle this when you make the ASA initially basic settings.
-Jouni
-
for the sqlf Server start command does not work
Hi Team,
while executing the following commands I am getting the following exception
sqlf> sqlf server start -dir=server1 -client-port=1527 -mcast-port=12333 &;
SQLF ERROR: Unable to establish connectionCould you please help me in the present.
Thank you
Ben
Hi Ben
I guess you run it from inside the shell SQLF. Must be run from outside she either exit the SQLF Shell to help quit smoking; and then run in the OS for example (bash UNIX) or cmd in Windows.
-
Remote Desktop does not work since MacOS Sierra update
Unable to connect with Remote Desktop or cord that worked before update
Greetings geoffshop,
Thank you for using communities of Apple Support. It seems you want to use under macOS Sierra remote desktop, but it does not work.
I recommend you read this article, it has the settings you want to check to make sure that it is able to work.macOS Sierra: allow remote desktop to access your computer
Take care.
-
Hello
I'm trying to access WSDL to record producer portlet application
http:// < Host >: < port > / wsrp-tools/portlets/wsrp2? WSDL
Strangely, it works in the built-in server, but it does not work in stand-alone server.
What I need to deploy any specific library, can someone help me, what I'm missing here
Concerning
Kunal
Hello
To deploy the producer WebCenter Custom applications and you must create the server managed 'WebCenter Custom Services producer' (WC_CustomServicesProducer) and which involves the following steps:
- Create patterns for the "producer Services WebCenter Custom" managed server.
- Create the "producer Services WebCenter Custom" managed server.
- Start the 'WebCenter Custom Services producer' managed server.
I suggest that you follow the below document and explains how to use Oracle JDeveloper to deploy the producers portlet in Oracle WebLogic managed server configured to test the deployment of applications or to host production applications.
Producers of Portlet deployment 61
http://docs.Oracle.com/CD/E29542_01/WebCenter.1111/e27739/jpsdg_portlets_deploy.htm#BIHFIEJB
Concerning
Françoise
-
Nested error Server R2 2012 - "hypervisor does not work.
Good afternoon
I'm having some trouble from a virtual computer inside my 2012 R2 VM server. I search around the internet for a while find several articles and forums on how to configure nested visualization including the official document on these forums but I still have a problem.
My configuration:
Physical server running - ESXI 5.5 1623387
Physical machine - dell R720 (2 x e5-2690 - supports the VT - X and the EPT and it is enabled in the BIOS, esxcfg confirms with '3')
New VM - Server R2 2012, VM version 9 installation (created by the web console vmx-09)
I added / tried every configuration option I found:
-J' created the virtual machine console web and checked "expose hardware virtualization assisted for the guest OS.
-I made that vhv.enable = "TRUE" in the vmx configuration
-J' tried to add hypervisor.cpuid.v0 = 'FALSE' to the vmx configuration
-J' tried to add vhv.allow and more vhv.enable in the/etc/vmware/config, but neither makes a difference (discovered he was not necessary later thanks to a post on this forum)
-J' tried to set the name of guestOS to "winhyperv" in the .vmx file
-J' tried the type parameter of "ESXi 5.x" guestOS in the thick client
-J' set the cpu/mmu virtualiztion tick at the last
-J' tried to set the registry values level 1 as seen here ecx
-J' have ensured that monitor.virtual_exec = "hardware".
-J' uninstalled the hyper-v role and reinstalled after you make these changes without result
-J' tried an another 5.5 ESXi 1331820 host with these settings and it does not work (VT - X confirmed as well)
-J' tried 2016 instead of 2012 R2 server and it does not work
I think it's all the things I tried. I'm sure I've probably missed something very obvious, but any help would be appreciated.
This specific virtual machine has not generated a vmware.log file but still one of my virtual machines to test (with the same exact questions on the second physical host) has generated a couple and I enclose you one of them, and more can be provided if necessary.
Thank you!
Post edited by: Ian details price changes
It seems that the latest Hyper-V does not like hardware virtual version 10. However, it seems not be satisfied with version 11 of virtual equipment.
-
VMWare Update Manager Server does not work after changing name of host/IP
I have Virtual Center 2.5 update 4 and Manager Update on two separate servers.
I had to rename and change the IP of the Server Manager to update, and now the Server Update Manager does not work.
Here are two mistakes that I get, when you try to activate the plugin Update Manager:
"The server took too long to respond" or "VMWare Update manager cannot accept applications because VirtualCenter.
Server is not reachable, or it's the database is not reachable
by train to stop'
That's what I did to change the host name:
-J' uninstalled virtual UpdateManager 1.0 Clients Center customer.
-I stopped the Service VMware Update Manager on the update server
-J' I renamed the update server changed its IP address and the host name and then rebooted the server (without starting the VMware Update Manager Service)
-J' changed the value of the fields
dbo. VPX_EXT_CLIENT. URL
dbo. VPX_EXT_SERVER.UR
-in the vCenter (on the vCenter server) database reflecting the new name of the server (the new hostnameis to pings to the vCenter server)
-J' restarted the vCenter Server
-J' started the Service VMware Update Manager on the update server
-J' installed the client plugin update manager Virtual Infrastructure client
-J' have TRIED to activate the plugin, but I got a warning about an untrusted certificate (I guess it happened also when I installed the client for the first time, and everything worked) and then I got two errors:
sometimes "the server has taken too much time to react" and a few other times "the VMWare Update manager cannot accept applications because VirtualCenter.
Server is not reachable, or it's the database is not reachable
by train to stop'
I think that there are a few other references to the host name of the Update Manager, which I have not changed, on the vCenter server or Manager Update server...
Does anyone have an idea what do I do?
Thank you in advance.
I would try just reinstalling the update on existing installation manager. Do not overwrite the database in the process so that you shouldn't really lose anything. Not the plugin, but since the Update Manager vCenter installation media.
Give that a try and let us know how it goes.
-
Application does not work on server
Hello
I have an application that uses web services. It works very well on local. But when I upload it to the server, my webservice does not work. No error or a message, it just doesn't work. It does not wear out, login, post something.
I tried to debug the version and the final version, the two does not work on the side server.
You have an idea?This is my Web page: http://bilencekic.net/zula/zula.html
user: 123123
Pass: 123123
as you can see, nothing happens.
If this post answers your question or assistance, please mark it as such.
Often this is because you must add the - use-network = true compiler option in FlexBuilder menu bar:
Project - Properties - Flex Compiler - additional compiler arguments:
Add - use-network = true, and then recompile and post back to the server, should work fine.
Note: If you create a "Release" version and move elsewhere on your local computer, you may need to add - use-network = true, and then recompile the application to access local resources outside the Flex Builder environment.
Maybe you are looking for
-
An SSD will you recommend?
-
I bought a few weeks ago. After upgrading to win8.1, I noticed the speed of internet was slow, I'm on a connection "Ultra-fast VDSL" yet all downloads by wireless are 15 to 25kbs max. If I connect the cable to the modem and disconnect the wireless co
-
7.1 of IntelliType Pro and MS Natural Keyboard Pro...
IntelliType 7.1 pro does not offer the MS Natural Keyboard Pro as an acceptable product when you select the type of keyboard. Can I use one of the other keyboards, or I am simply out of luck?
-
Try to install the NEW Vista on computer with forgotten password
I have a laptop Acer 4520 who gave me, but cannot be used because the password was forgotten/lost. I bought a new Vista Home Premium (full version), so I might just wipe the drive and start fresh (I don't like that I will lose everything). (He alre
-
Im trying to use my Wi - fi hot spot of my t-mobile phone
Im trying to use my t-mobile device mobile Wi - fi hotspot. I can not get access to the internet. Please if are available and ready to help on my question, send me and email * address email is removed from the privacy *. I would really appreciate it.