Remote STR-DN1030 code

Similar Questions

• 7.1 surround back speakers - str-dn1030 are considered "up front."

  I bought the STR-DN1030 as a replacement for another amp 7.1 flaw. After you have connected, my Surround 7.1 Back speakers are treated as "high forehead.

  I can set up as 5/2.1, but then the surround back speakers are calibrated correctly and have the height of output instead.

  The test for this output tone labels 'high front.'

  Shouldn't be able to choose 7.1 as my configuration option.

  How can I fix this so that they properly Surround Back?

  The assign SB setting is 'off '.

  The front of the speakers before a selected device (no others are possible)

  Honestly, the menu interface is clunky and non-intuitive. I spent a few hours without being able to understand. The non-geek consumer would be certainly more frustrated than i. spend two days on this make me rethink my choice of replacement.

  Hello Dan,.

  Change to 3 speaker model / 4.1 then perform auto calibration.

  If my post answered your question, please mark it as an "accepted Solution".

• HE can't get my network wireless on my STR-DN1030 to work.

  I can't my network wireless on my STR-DN1030 to work. When you select settings/network, it will not bring up needed for the wireless configuration screens. It goes straight in the last entry on that I was.

  You hit the right arrow to move to the next step of the installation?

  So you're poorly understand the buttons and hit the wrong keys. Then please list the exact steps you do in order. Include the name of each menu item and button you choose at each step. So I can try to understand what can be the cause of the problem.

• STR DN1030 GUI

  Y at - it an upcoming software update for better graphics on the STR DN1030 GUI?

  Software update helps to improve the features and characteristics of a product and can also provide patches of service for specific questions. An update details are always available on our esupport site according to the model number of your device.

  Currently, there is no update software is available for your receiver to the homepage of STRDN1030 . In addition, we have no access to information on future versions of the software updates.

  If my post answered your question, please click "accept as a Solution.

• STR-DN1030 can't make Airplay connect to my iphone or ipad?

  Hello

  I've only had this receiver a month or two, and there has been a few occasions where I had success with it, but most of the time if I try to use my iphone (4 s) or (3) to disseminate with airplay, it connects to the receiver.

  It seems 'try' every time, as my phone change controls temporarily (volume slider moves, music playback may stop sometimes but not others and icon airplay on changes in white with orange sometimes phone) but no music of the alembic of amp, and it then just stop trying.  Even after 20 attempts on a given ios device, it does not work with airplay.

  I have a very good wifi signal in my house and also the receiver is connected to a gigabit LAN so avoid any problem with connectivity like that if it is used in this process (guessing airplay may directly amp phone?).

  Any suggestions I can try?  Network streaming works ok, but it's much more tedious so I not really bother.

  Another question - a UK client, my amp doesn't have Bluetooth and I'm really gutted that I only discovered this after buying.  I REALLY want this feature, so please could someone explain to me why you miss on bluetooth, simply because we are in England?

  Thank you very much.

  Hi Cretster,

  What is the router that you use, and is the firmware updated?

  Some routers may have a time difficult, send and receive information for network broadcast even though you mentioned that the DLNA works very well.

  The same thing happens with any Android or Windows based OS?

  IOS devices are updated to the latest firmware on the Apple site?

  Two iOS devices trying to connect the receiver at the same time when you use Airplay?

  When you have these problems, iOS devices still show the STR-DN1030 as an adjustable device for Airplay streaming, or the device disappears it?

  You mentioned that the STR-DN1030 is connected to a LAN Gigabit Ethernet. You have connected the device directly to the router? If this isn't the case, then is it possible?

  You can reply back with them questions so that we can consider the situation further, or if my post answered your question, please mark it as an "acceptable Solution".

  Thank you.

• How to connect the Nintendo Wii to my STR-DN1030?

  Hello

  I recently bought a STR-DN1030 and I have a question now to get the Wii audio. I use a RCA cable with video connector 3 (red/green/blue) and 2 audio connectors (red/white). What I want is for the audio and video get the amp with RCA and out to the TV via the HDMI TV OUT cable.

  So I plugged the video connector 3 RCA to "Component video - SAT/CATV (2)" and tried to connect the 2 RCA audio connector to "Audio in" (sat/catv) but I have no sound, even if I get the picture.

  On the allocation of entry for the video source (I choose video 1) I put the video on computer.  and audio analogue.

  Can you tell me how can I connect the Wii RCA component cable so I can get the video on TV via HDMI and the sound of the amp?

  Thanks for your help.

  Try to use the sockets labelled AUDIO IN TV to the AV STR-DN1030 receiver. If the same problem persists. Please provide the following information:

  1. What is the brand name of your television? If it's a Sony, which is the full model number? If it is other than Sony, is able in your TV Audio Return Channel (ARC)? (pages 26 and 27 of the Manual)
  2. If your TV isn't capable ARC , so you can connect an optical cable from the receiver to the TV.
  3. If your're TV's able ARC , does not sound problem occurs on all video games Wii that you tried? Do you get sound when the Wii is connected directly to the TV using the same red and white strings?
  4. Do you get sound when playing another source like bluray player, decoder, etc. ?
  5. Are all stakeholders affected or just some of them?

  Please follow the steps in troubleshooting here.

  If my post answered your question, please mark it as "accept as a Solution.

• Cannot connect remotely ASA5505 on code 8.0.5

  I have 2 ASA5505 firewall deployed, 1 in the data center (code v8.0.3) and 1 at a remote site (code v8.0.2).  Remoteness has 2 PCs that connect to the data center to access services directory, file servers, Exchange, etc.  ASA5505 firewalls are configured for a site to site VPN.

  We had problems of stability with the ASA distance we decided to upgrade the code first.

  We have updated the data center 8.0.5 and everything was fine.  I have given me flows and that I could enter the two ASAs since the data center via ASDM and ssh.

  Then I updated the remote location 8.0.5.  Now, I can't ASDM or ssh to ASA unless I am at that location.  PC are always able to connect to their servers.

  I can't do a ping, telnet, ssh or ASDM inside vlan ip address while I'm at the other site.  I see in the newspapers of being built on the distant firewall incoming connections, but it is not creating a new outbound connection to the movement of the answer.

  8.0.5 did something to block connections to management from outside?

  It is an odd, thanks for sharing the solution!

• 2 questions about Sony STR DN1030

  First of all, how can I activate AirPlay without turning on the TV at the same time? I have a Sony's Bravia TV. I tried to change the HDMI settings but did not understand right now.

  Secondly, one of the reasons why I bought this unit was because it supports the reading of Zone 2. I called Sony to ask about it before you buy it and was assured that she had the ability. However, I find now that Zone 2 does not work with AirPlay, which was the main reason I wanted. Someone has understood how to play Airplay through Zone 2?

  Hello

• STR-DN1030 goes into sleep mode when turning on the TV is turned off

  Why, when I turned my TV off my receiver will automatically in standby mode? Sometimes, I want to continue to play even after I have turn off the TV.

  It is a function called "control for HDMI" energy saving. TV tells you your receiver it stops and that the control is on the receiver does the same. You must disable the TV or receiver.

• Output STR - DN1030 HDMI to the TV does not

  The HDMI to the TV stopped working after a recent power outage.  I had the receiver for about 1 year and it has worked perfectly.  The inputs work fine.  Sound of DVR and BD are working properly.  However, the video output to the TV does not work.  I tested the cables and the TV by hooking directly to DVR & BD.  I had always hung on a surge protector and there is no damage to any other components.  I don't know what the problem is.

  I tried to reset the receiver as described.  It is passed by the method of COMPENSATION.  The output still does not work.  However, another problem arises.  The receiver and the display now rock SAT/CATV normal to LPCM [48] and DOLBY DIGITAL 5.1.  When the switching noise to cancel.

• AirPlay works do not with Sony STR-DN1030

  For some reason any airplay does not appear on my device more.  It allows to work properly any suggestions?  I have confirmed that I am connected on the network even with a good wireless connection.

  Thank you

  Follow the steps below to solve the problem.

• Vulnerabilities in Microsoft Windows could allow Remote Code execution

  

  My Question is: are you F * % ING KIDDING ME?

  Original title: Ko 3039066 security to PREVENT a REMOTE EXECUTION of CODE after 5years vulnerability update FAILING to INSTALL / UNINSTALLED by windows update!

  Hi C.D.Miller,

  What operating system is installed on your computer?

  This update fixes vulnerabilities in Microsoft Windows. The vulnerability could allow remote code execution if an attacker successfully convince a user to navigate to a specially designed website, specially designed to open or access a working directory that contains a specially designed DLL file.

  Follow the workaround solutions mentioned in the article below and check if that helps.

  Microsoft Security Bulletin MS15-020

  I hope this helps.

• I can't program my new remote control sony model rm - ez4 to my comcast cable box

  Any ideal about programming for this new remote control. I tried the codes listed, but no luck.

  Hi Mike,.

  Welcome to the community of Sony!

  Try programming the remote using the codes listed for the decoder to other manufacturers. If this does not work, use the method of research which will find the code for the cable box. Instructions to search the code of the component are listed below.

  
  If my post answered your question, please mark it as "acceptable Solution".

  Thank you for your message.

• Change LabVIEW code when executing

  Hello world! I'm quite new in LabVIEW and I have a question.

  If I change a code while it is running will there be problems? This code is a measure automation code, and I really don't want to screw up the measures.

  Thank you

  Edit 1: the code is in a shared hard disk. Assume that the code is running on a computer, and I change the code exactly the same from another computer, there will be problems?

  Diego

  diegocava wrote:

  I tried this experiment: a simple vi with a while loop and I threw it on my computer, I created on the shared drive. Then I used another computer and I opened the same vi (in this shared drive) and I have modified and saved the changes. After that I went to my computer and the code was still running without changes, as if I did nothing. Finally, I closed the vi and re-opened, find the changes made on the other computer.

  I think you answerd your own question in the present case.

  As I said the LabVIEW development system when running a VI. The VI is compiled at launch, so any changes made to the file VI will not affect the VI running in RAM.

  But what you do is 'dangerous', and you should not be remotely change the code that is running on another machine.

  Edit a copy, stop the running process and run your new code.

• BD/DVD only gets speaker TV sound when connected to 1030 STR - DN

  I connected my Panasonic BD. DVD player to Sony STR - DN1030 AV receiver and can't get audio through the TV speajers. No Dolby sound. This applies to DVD and BD media. The work of BD/DVD palyer very well with other systems in my house. Y at - there a special setting that I must apply in the menu of the receiver are getting a system audio sound?

  Receiver AV plays well with the TV Sony and Netflix, it is only with the BD/DVD player that there is a problem.

  maybe go into playback sound TV GUI and diaable...

  Make sure that also in the Chamber his game to HDMI (BD player) too... and also set in the Passthru Chamber...

  Who should do it