Remove a USB IRDA caused stop "panic."

Similar Questions

• Satellite Pro M70: removal of the USB device causes other peripheral USB does not work

  Withdrawal/use of a USB for a USB device causes devices on USB port to get affected.

  Satellite Pro M70-199 (2 GB RAM)
  Windows XP Pro (SP2) with all updates of Windows installed until end of October 2006.
  This laptop has 3 USB ports.
  An Eicon Diva ISDN USB modem is connected to a USB port.

  When certain devices connected to a different USB port are deleted (even if removed safely with "eject" or "remove device safely", it causes the ISDN modem to file either a double channel (64 k + 64 k) ISDN, or for the ISDM modem to disconnect completely.)

  Cause this include any memory stick USB, MP3 player (ipod and creative zen) and so on.

  Do other devices, such as USB external hard drives & sometimes external DVD USB drives, and sonetimes do not produce this problem.

  Is this a known issue?
  If it is a hardware interrupt problem, how to solve it?
  This problem is related to the modem and the laptop?

  As a note, in addition, intermittent (random) times (cannot reproduce all the time, but it happens once or twice a day) when a USB device is accessible it causes the modem USB ISDN to drop a single channel, even if the lights on the modem still show it as it is connected. In this case and the case above, the only way to get the modem ISDN USB running again is physically disconnect and reconnect.

  The reason why it is a crucial issue is that:
  (1) the modem speed is halved or disconnected
  (2) the ISP continues to full rate for a double load connection even if a channel has been dropped.

  Any help will be greatly appreciated.

  Here is some information on USB devices, followed by some information about IRQ settings.

  Driver date 01/07/2001
  Version of the driver 5.1.2600.2180
  Driver provider Microsoft
  File INF usbport.inf

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  Location Information PCI bus 0, device 29, function 0
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 23
  Port 1800-181F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  Hardware ID PCI VEN_8086 & DEV_2659 & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 1
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 19
  1820-183F port

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  Hardware ID PCI VEN_8086 & DEV_265A & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 2
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 18
  Port 1840-185F

  Description of the driver Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  Hardware ID PCI VEN_8086 & DEV_265B & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 29, function 3
  PCI Device Intel 82801FBM ICH6-M - USB Universal Host Controller [B-1]
  Device resources
  IRQ 16
  Port 187F-1860

  Description of the driver Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  Date of the driver 06/01/2002
  Driver Version 5.1.2600.0
  Driver provider Microsoft
  File INF usbport.inf
  Hardware ID PCI VEN_8086 & DEV_265C & SUBSYS_FF001179 & REV_03
  Location Information PCI bus 0, device 7 function 29
  PCI Device Intel 82801FBM ICH6-M - Enhanced USB2 Controller [B-1]
  Device resources
  IRQ 23
  Memory B0000000-B00003FF

  Description of the device resource sharing
  DMA 04 exclusive Direct memory access controller
  IRQ 00 exclusive system clock
  IRQ 01 exclusive Standard 101/102 key or Microsoft Natural PS/2 keyboard
  IRQ 08 exclusive system CMOS/real time clock
  IRQ 09 shared system compatible ACPI Microsoft
  IRQ 11 shared Intel (r) 82801FB/FBM SMBus Controller - 266 a
  IRQ 12 exclusive pointing Alps-device
  IRQ 13 exclusive Numeric data processor
  IRQ 14 exclusive Primary IDE Channel
  IRQ 16 shared generic CardBus controller
  IRQ 16 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 b
  IRQ 16 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2662
  IRQ 16 shared Mobile Intel (r) 915GM/PM Express PCI Express Root Port - 2591
  IRQ 16 shared ATI MOBILITY RADEON X 700
  IRQ 17 shared Realtek AC97 Audio
  IRQ 17 shared Intel (r) 82801FB/FBM PCI Express Root Port - 2660
  IRQ sharing 17 Texas Instruments PCIxx21 Integrated FlashMedia Controller
  IRQ 18 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 265 a
  IRQ sharing 18 Texas Instruments OHCI Compliant IEEE 1394 Host Controller
  IRQ 19 shared host controller Standard SD compatible SDA
  IRQ 19 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2659
  IRQ 19 shared Intel 82801FBM Ultra ATA Storage Controllers - 2653
  IRQ 20 shared of TOSHIBA software modems
  IRQ 21 shared Realtek RTL8139/810 x Family Fast Ethernet NIC
  IRQ 22 shared Intel (r) PRO/Wireless 2200BG Network Connection
  IRQ 23 shared Intel (r) 82801FB/FBM USB Universal Host Controller - 2658
  IRQ 23 shared Intel (r) 82801FB/FBM USB2 Enhanced Host Controller - 265C
  

  Post edited by: sakhri

  Hello

  I have Satellite M70-159 and I didn t notice any strange problems with the USB ports. I use a few of them as printer, webcam, USB, memory stick, optical mouse, and external HARD drive. The devices are recognized correctly and I always remove without option delete without danger.

  Now I have Vista pre-installed and there is no problem so far. If I understand you right USB ports work fine but there is problem with USB modem only. Am I wrong?
  Also try to contact the producer of modem support. Is perhaps the question like this known and if all goes well, they have a logical explanation.

• After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing. It is on a Toshiba Satellite running Vista

  After the use of any USB device, I stopped the device that comes in the window telling me it is safe to remove the device and then my computer crashes I have to make a difficult start to resume what I was doing.  It is on a Toshiba Satellite running Vista

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
  all except the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  ------------------------------------------------------------------------------------------

  If no joy, see Toshiba Support and/or their forums:

  Toshiba support and drivers
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba Support Forums
  http://laptopforums.Toshiba.com/

  Contact Toshiba
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  I hope this helps and happy holidays!
  Rob - bicycle - Mark Twain said it is good.

• How do I remove the USB key in Windows 7

  I just upgraded from Vista x 64 to Windows 7 Home Premium x 64. All right, as far as I can tell, but I don't see any way to stop or remove a USB HDD. When I am using a flash drive, the context menu offers the possibility to "Eject", but this option does not appear for USB drives. What Miss me?

  The icon 'Remove hardware safely' is available for USB drives, too. It mine, shows anyway. You probably just hid it. Win7 does not display the default icon more.

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area-of-the-taskbar

  In fact, Win7 'probably remove' features of a really nice feature missing in previous MS operating systems - it actually tells you what device you clear safely. MS - MVP - Elephant Boy computers - don't panic!

• Random stops of Macbook Pro with "cause stop:-128.

  My Macbook Pro 15 "mid-2014 A1398 will stop randomly.
  Console shows "cause stop:-128.
  I have zero SCM and NVRAM until reinstalled OS X.
  Apple Diagnostics showed no questions.

  A negative stop code may indicate a hardware problem. The precise meaning of the codes is not publicly documented.

  An appointment of 'Genius' to an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.

  Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.

  If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.

  Keep your data confidential and secure during the repair of the equipment.

  Apple recommends that you remove permission to a device in the iTunes store before serving.

  * One SSD has no need to be set to zero.

• Impossible to safely remove external USB HDD - ejection of mass storage device problem

  Hello

  I have a 250 toshiba external hard drive. "When I go safely remove device and click on stop, guests me that ' ejection of mass storage device problem and try later.

  Is there a reason for this? As I have heard it is dangerous to pull the cord without stopping it first.

  This happens usually when something is always access to the USB - HDD.
  Yes, it s dangerous to pull on the cable, because you can lose some data and the file system may be damaged. But if you have a situation where you need the drive to take with you and want to just get out the cable to the USB port there is a little trick to disconnect the security apparatus:

  Do right click on 'My Computer'-> click on Hardware-> click "devicemanager"-> go into "diskdrives"-> then you need to click on the drive that is your USB - HDD-> with the right button and then click on 'Properties'-> in the menu properties of this drive, you must go on "policies" and click on "optimize for quick removal"-> and then click OK and exit this menu and all-> perform a reboot-> closing information fact. :)

  After that, it s safe for remove you your drive even if it s not ejected. :)

  Welcome them

• Cannot remove my USB safely

  I am not sure that this is the appropriate for this forum, but I didn't know where else to post.

  It seems like every week, I have a new problem with my laptop!

  I have a laptop HPG50-126NR 4 to 5 years. I am running Windows Vista Home Basic, 32-bit with Service Pack 2. Yesterday, I needed to work on some documents of my SanDisk USB key. I did it without any problem.

  However, now I can't remove the USB safely. When I click on the green check mark in the lower status bar right, then he said "Remove USB mass storage - device Drive G.» When I click on it, a pop up says:

  "Windows cannot stop the 'Generic Volume' device because it is in use." Close programs or windows that might be using the device and then try again later."

  Well, all programs and windows are closed to my knowledge. At least, I don't see any open. My guess is the key USB hangs by a window (maybe Firefox is running in the background) or a program that attaches to the USB, but I have no way of knowing. I can try sutting down, but I am concerned about the documents on the USB.

  Any ideas what to do or the best forum I can ask.

  Thank you.

  Anovice

  Hello

  Thanks for posting on the HP Forums!

  I understand that the computer can't find not safe eject a USB device. I apologize for the inconveniences of your laptop, but I'll see what I can do to help you!

  First of all, this happens with multiple USB devices or alone. If this happens with one, the unit could be in trouble. If this happens with multiple devices, then you know that the problem lies in the computer. If this is the case, try the following steps:

  1.right - click on your taskbar, and then select Start Task Manager.

  2. look for Explorer.exe and interrupt the process.

  3. click on file, then new task. Type Explorer.exe and let it restart.

  At this point, you should be able to remove media. Please let me know your results. Thank you for bringing This problem on the HP Forums. Have a great day!

  Mario

• Satellite C650 15Z two USB ports have stopped working / load

  Hi can someone throw their professional opinion on a current problem I am experiencing with my

  Satellite C650 15Z
  Windows 7

  There are 2 USB ports which are now both inoperative - there seems to be no power from them (ipad/phones do not charge) and any flash drive I insert does not appear as a drive in my computer
  and I don't hear audible alerts or message pop ups after insertion. Like I don't know what I look in Device Manager, I thought that someone may be able to help here?
  Thanks in advance

  Hello

  In Device Manager, you can try to delete and remove the USB host controller and USB hubs.
  All these devices are responsible for the functionality of USB ports.
  After you remove the USB host controller and USB hubs, restart the laptop.
  Usually the Windows operating system should recognize the devices automatically deleted after that, you can check if the USB feature is back.

• Can not install device driver USB IRDA Kingsun on Satellite A100 with Vista OS

  I have a USB IRDA Kingsun device that worked well on a desktop with XP but my Satellite A100 with Vista defies installing the drivers that came on a CD with the IRDA.

  How can I install or does anyone know one that works with Vista?

  Hello

  If you are not able to install the 3rd party device IRDA driver on Vista, it seems that the disc is not compatible and don t support Vista.
  Seems you have to contact the manufacture of the IRDA device and ask the compatible reader

  But maybe that you're unlucky and the Vista driver does not exist?  :|

• my front USB drives hsve stop working. How can I restore them?

  My front USB disks have stop working.  How can I restore them?

  Hello

  Please use the following thread only:

  http://h30434.www3.HP.com/T5/forums/replypage/Board-ID/DesktopQA/message-ID/31803

  Thank you.

• USB-6009 has stopped working.

  Hi all

  I used a usb 6009 to turn on or turn off a transistor when two digital signals have been read on pins 0,0 and 0,1. 6009 usb has now stopped working and is not flashing or showing up on top of my laptop or other computers. + 5 volts pin has been accidentally connected to a fraction of a second by an another 5 volts of power fed 220mA, would it have damaged the device? Any help would be appreciated.

  Thank you.

  Hi all

  Thanks again for your help. I received a reply from the technical team on a cost for repair so I can see what the boss says.

  Thanks again.

• Not able to remove the USB stick while Labview is open

  For all the gurus.

  I'm using LabView 8.5 and made an Application that requires the user to download the data of the disc/USB. Then, when VI works user invited to select a. TXT from USB to download file. Here, the entire operation ends as desired. Only ONE PROBLEM I am facing is when download completed attempts to the user to 'remove the USB' where gives windows a warning saying USB is in use and cannot be deleted.

  This particular VI I use function of file dialog box to browse USB and let the user select a file. I even tried to use the function to open the file, but it gives same error.

  The only way I can pull out USB after the download is out of Labview which is not feasible for my application.

  is this a Bug in 8.5 or is there a different way to do it?

  Any help will be appreciated.

  Concerning

  You can call the Windows API SetCurrentDirectory function (see attachment), but if you follow the link you will see it warns about its use in multithreaded applications. I have no experience with it, so I can't comment.

• I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page. But he does not accept printing orders

  I have; ve reinstalled the software, wireless, everything went through fine. He asked me to remove the USB cable while it printed a test page.  But he does not accept printing orders - printer offline.  Very frustrating!

  So, you have a problem with Picasa. You should contact them.

  I also quite what your note 'Wireless' has to do with the question. Maybe it's because you have yet to provide a lot of information...

• I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  I have a wireless optical mouse and I can't remove the usb of my laptop Gateway receiver. It is stuck there. How to get out?

  Hello

  The unit just has USB slide out. If it is stuck, consult with a real computer store (the one that makes
  his own service in the House and not leeks and glances at a Best Buy or other stores) or gateway
  supported.

  Gateway drivers and downloads
  http://support.gateway.com/support/drivers/dlcenter.asp

  Technical support Gateway
  http://support.gateway.com/support/?cmpid=topNav

  Door Documents
  http://support.gateway.com/support/SUPINFO/index.asp?cmpid=topNav

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I remove a USB write protection

  my USB is write-protected how to remove it?

  Hello

  What operating system do you use?

  Write protection is a feature found on many different types of media. When the write protection is turned on, you will be able to view the information on the disc or USB key, but you won't be able to write or transfer information to it.

  Write protection is an element of protection which prevents accidental deletion of important data. Sometimes turning off the write protection is as simple as uncapping the USB key to find a manual switch. If your player lacks an external switch, the procedure requires a few steps to complete.

  (a) turn on your computer and plug the drive after that your operating system is loaded.

  (b) open 'My computer' and the list of readers of research until you find your USB drive letter

  (c) right click on the name, then click 'properties '. Browse the tabs until you see the option to remove the write protection. If this does not work, proceed to the next step.

  (d) visit the website of the company for your USB key. Go to the help or support section and search for "write protect".

  (e) search the Internet for software that will remove the write protection. Download the program and install it on your computer.

  (f) open the software. Follow the instructions to remove your USB write protection.

  I hope this helps.