Replacement receiver wireless laser 6000 mouse for

Similar Questions

• I have a wireless laser 5000 mouse and laser light does not. New batteries and nothing.

  My wireless laser 5000 mouse used to have a light on the background. It is no more. What I have to buy a new, or is there something I can do to remedy this? Thank you

  Hello

  1. are you able to use the mouse laser wireless desktop or not?
  2. have you checked the mouse on another computer?
   
  Check if the device works on different computers. If the device does not work, contact the Microsoft order in the (800) 360-7561 to get a replacement. If you are outside the United States, contact the Microsoft subsidiary for your area. To locate your subsidiary, visit the following Web Microsoft World Wide Offices Web site:
  http://www.Microsoft.com/worldwide/
  See Help links:
  http://support.Microsoft.com/kb/838398
  http://support.Microsoft.com/kb/321122
  It will be useful.

• HP Wireless Laser Mini Mouse black - how to start or STOP?

  I recently installed a HP mini laser wireless (model MORFB1UO) and not where they say nothing on it turn on and off.  My concern is that I will wear the battery quickly if I do not turn off it when I'm not using it.

  An email to support HP resulting in the following statements:

  "Click Start."

  O and click on run

  O type devmgmt.msc in the box run

  O and press ENTER.

  O make a right click on the mouse and other pointing devices and select Disable.

  Follow the same steps to enable. »

  This seems like a lot to go through every time you put a computer on or off. There must be an easier way to prevent battery discharge when not in service. I couldn't remove the battery, but this seems clumsy and a little silly.

  Any suggestions?   Thank you very much.

  I'm having some problems with out my messages.  Here once again...

  I have rec'd no definitive answers, but an e-mail from HP said that it is not attracting a lot of power when not in use; Therefore, I just let the mouse on.   It has been 7 days and it is still ongoing.

  The USB connection seems to be fragile because it sticks out so far.  It could easily be interrupted, but I leave hip except when moving the computer.

  I have no problems with tracking or lose contact with the computer.  I am running Vista.

• I need help connecting Microsoft wireless Laser Desktop 4000

  I am trying to hang a Microsoft Wireless Laser Desktop 4000 for a system using Widows XP. The wireless mouse works but the keyboard is not I would like any information I can get ion this question... Thank you very much, MR. Grimm

  Hi norseman168,

  • What happens when you connect the keyboard to the computer?

  I suggest that you download and discover the Microsoft wireless Laser Desktop 4000 manually using the link below to check the use of it and its features.

  http://www.Microsoft.com/hardware/en-us/d/Wireless-Laser-Desktop-4000

• Wireless Laser Mouse 6000 v2.0 does not connect to the Wireless Desktop 3 receiver. 0a

  Hello

  I'm having a problem, try to use a Wireless Laser Mouse 6000 v2.0 with a wireless desktop receiver 3. 0a. My previous mouse, wireless laser Mouse 5000 connects fine but the left click button is inadmissible about half the time so I bought the Wireless Laser Mouse 6000 v2.0 to replace. Laser mouse 6000 v2.0 works fine on my laptop with the usb receiver that comes with it, but I would like to use this mouse if you use my office receiving office 3. 0a that connects my microsoft comfort keyboard 1027 and all other previous microsoft mouse that I have owned. I downloaded and installed the latest drivers point software and smart and still it does not detect or connect the mouse 6000 v2.0.

  I tried to use the usb receiver supplied with this mouse on my desk but he won't my keyboard (comfort 1027), but the mouse works fine when using the usb receiver. Any suggestions to get this mouse works with my receiver older are greatly appreciated! Thank you

  Hi Mburton8899,

  It must have the same version of the receiver in order to work properly. Unless the mouse is bluetooth, it can only pair with the USB dongle, with which he came.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Compatibility of the 'wireless laser mouse 7000' with 'wireless laser mouse 6000 receiver.

  Hello

  One of my colleagues gave me his extra Wireless Laser Mouse 7000, but he gave me a Wireless Laser Mouse 6000 receiver. will be the mouse 7000 and 6000 receiver work? are they compatible?

  help someone?

  Hello

  Yes those should work - just install the software (Intellipoint) and configure the mouse than the 7000.

  IntelliPoint - free
  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Wireless laser mouse 6000 v2.0 freezes / causes other problems.

  I had the wireless laser mouse 6000 v2.0 and the keyboard since April, but the problem just started occurring. I'll start my computer (I have Windows XP) and everything will be fine. As a first step, I can click on the start menu, but if I open a window, it seems that whenever I go to click on the window it will click out of it so I can't select it. From there on, I can't click on anything, no icons or anything. I have to press ctrl alt del to be able to click on the window or another program. I also discovered while I was in Internet Explorer I would surf the web, and he would start pages like I'm pressing the back button to return.

  I already tried things:
  -Uninstall Intellitype, uninstalling the drivers.
  -Change the USB ports.
  -Elimination of some programs / firefox & internet explore [I thought that maybe a bug as possible.]
  -Completely nuking my computer and put a new new version of Windows XP.
  None of them worked.

  The only thing that worked was to move the mouse and the keyboard with my old mouse and keyboard that are not wireless. This is driving me crazy. I just received it and had no problems until recently perhaps an update of some sort, but now he does it on a fresh new copy of XP. What other options do I have?

  I had problems by two different laser mouse 6000 V2, on one, the right click does not work except sporatically, now my other mouse is having problems with the left click function.  I am about to replace the micro-switch SPST (I think that's true) to see if that fixes it.

  FOR INFO!

  I contacted microsoft on this subject (on the defective mouse) about 1 year... less than 2 weeks I received a COMPLETELY NEW mouse AND keyboard NEW in box to NO FEES, no RMA, NO return and was NEVER billed for replacement.  I ended up giving the other combo to my brother and he still works fine (other than the hard drive to use right click on the service), the same thing is happening to this mouse, it is difficult to make a left click, sometimes it works, sometimes, it is not click at all, sometimes it double click on...

  Give it a try, send an email to microsoft.

  I think they have problems with their defined wireless desktop V2 and replace without charge, without admitting a problem.

  Hope this helps somehow.

  PSS, if you have NO function of the mouse AND keyboard, or just the mouse work not at all (NO movement etc.) I had a neighbor install a just CB radio next... frequency RF interfered with the signal RF mouse and the mouse (and sometimes the keyboard) refused to work as long as he handed (IE holding the key to the transmission on the CB).  Sorry if this seems rudimentary, but some people have trouble understanding certain issues so I try to make them as simple as possible.

  The rule that follows:

  Interference RF (CB, other wireless devices on the same frequency (of HAM Radio etc.),

  Exclude the above listed issues.

  Otherwise, it would appear that you have either A: a bad receiver (The Oval device plugged into the PC), or B: a bad mouse RF transmit/receiver.  Anyway that I will try to return the product I used the Wireless Desktop 6000 V2 over 3 years with NO problems other than to wear down me the switches in mice.  (I use my PC very strongly).  Try emailing Microsoft for a replacement, it can't hurt and maybe you'll get a new like I did!

• MS Wireless Laser Mouse 6000. When I test of arrow to scroll/bounce backwards and forwards

  I have a MS Wireless Laser Mouse 6000. For a while it was fantastic, but now, everytime I try the / arrow scrolling through columns of docs, images or e-mail items moved with the cursor (on the side or on the bottom) begins to bounce back and forward and points of view moving vertically (or left and right uncontrollable.) To increase the frustration, sometimes things work normally for a short period before the fun begins. When I change to a basic mouse (USB) there are no more problems! : O Tony

  Most often when a device does not work, it's because the driver has been corrupted.

  Try reinstalling your.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/

• install Microsoft wireless laser mouse 6000

  Hi, I bought used ms laser 6000 wireless mouse, this one: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-6000 and now I can't find it on the bluetooth on my laptop, I have Bluetooth v2. The mouse requires installing with usb receiver or is it regular bluetooth mouse like those of ebay, you can buy?
  I don't have a usb mouse with receiver and I thought it's ok because it should work on the bluetooth connection, but I can not connect, bluetooth it will not identify not even with the 'Connect' button on the mouse. the mouse works because the laser light is on.

  It is not a Bluetooth mouse.  This is a RF mouse and requires the receiver supplied with the mouse.

• MS Wireless Laser Mouse 6000 v2.0 cleaning

  Is it safe to open the mouse laser to clean the wheels. It sticks so badly, I can hardly use it.  (Less than one year)

  Hello

  Not really sure that Microsoft would say a situation where there need cleaning. Personally
  I would like to clean however remember I am not an employee or a representative of Microsoft.

  Wireless Laser Mouse 6000-3 years warranty
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=010&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  The mouse comes with a support tech 90 day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  -------------------------------------------------------

  Take apart can void your warranty.

  Microsoft Wireless Laser Mouse 6000 cleaning
  http://www.iFixit.com/Guide/repair/Microsoft-Wireless-Laser-Mouse-6000-cleaning/3028/1

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Mouse Microsoft Wireless Laser Desktop 6000: do not use the new Intellipoint

  I have the Wireless Laser Desktop 6000 B7T-00020-B. The keyboard works fine with the latest driver, but the Intellipoint software recommended for this mouse [model: 1052] by Widows Update causes instructions magnifying glass and the mouse to start randomly wih no way to stop it. You have to start in safe mode to remove the driver, BUT it leaves a condition behind this function of normal mouse affect. Menus not roll down and stay, they go too fast click. The button in the Explorer does not work. My challenge was to re - install Intellipoint, download Revo Uninstaller and start in safe mode and used to rub the driver anywhere.

  Hello Elvinbrent,

  I suggest you to check with the Microsoft Hardware support for more information.

  http://www.Microsoft.com/hardware/en-us/support

• Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000

  I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.

  It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.

  Any suggestions appreciated

  Hello
  Before starting any discussion can you please tell us which laptop model you have?

  BTW: What is your BT mouse has own dongle BT?

  See also http://aps.toshiba-tro.de/bluetooth/pages/faq/keyboardnotworking.html

  Good bye

• Cannot find the software for my ms wireless laser mouse 8000

  Cannot find the software for my ms wireless laser mouse 8000

  I don't know why you posted this in the forum Office XP, so I moved it to Windows XP 'Hardware and drivers' forum.

  You can find the drivers for the Wireless Laser Mouse 8000 here: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-8000

• How to fix problem with Windows vista to fail to load while a dual receiver wireless (for keyboard & mouse) is to plug it into any USB port?

  Turning on the PC with a wireless receiver (Microsoft model 1119) plugged to any USB port causes Windows Vista does not load.  Turn off the PC, unplug the receiver, put the machine, loads without problem.  Once windows is loaded, reconnect the receiver wireless Microsoft and less than a minute, the keyboard and the Microsoft wireless mouse works perfectly.  Device Manager does not take into account conflict of devices.

  Hello

  Thank you for keeping us posted.

  Check if the hard disk has been set as the first boot device in the boot coastal in Input/Ouput order Basic (BIOS). Otherwise, you can set the hard drive as the first boot device and check.

  Consult the manual of the manufacturer, to do the same thing.

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

  Hope this information helps.

• Microsoft Wireless Laser Mouse/Keyboard Version 2.0/3.0

  Hello!

  I was wondering if I can use my v2.0 USB Microsoft 2.4 GHz TRANSCEIVER that works for my keyboard Microsoft Wireless Laser V3.0 and my Microsoft Wireless Laser mouse V2.0 work for my other keyboard and mouse because I lost the transmitter/wireless receiver I had to for use. Anyway, the keyboard is called: Microsoft Wireless Laser Keyboard 6000 v2.0 and mouse is called: Microsoft Wireless Laser Mouse 6000 (there is no version on that). Also, if I can't use the USB with my keyboard and mouse, I was wondering if someone could fix my mouse? My mouse will not move. I move the mouse and my clicker or this thing won't pass. And then sometimes I can just click on it! Please help on these two problems. Thank you very much!!! (:

  Hello

  For Microsoft hardware related issues, you can have a look at this link:

  http://www.Microsoft.com/hardware/en-us/support/troubleshooting