report of situation of the service...

Similar Questions

• HRESULT was 80070437 line 45 of d:\longhorn\com\complus\src\events\tier1\eventsystemobj.cpp. Contact the Services de Support technique Microsoft to report this error.

  It is a mess that everything seems to have something to do with the user unknown, profile and permissions?  I do not know

  This first paper below, is the 4th down from the top of the stack of the event view administrator. I posted it all initially due to 'please contact Microsoft Product Support Services to report this error.' requested in this journal

  Log name: Application
  Source: Microsoft-Windows-EventSystem
  Date: 2011-08-20 15:23:12
  Event ID: 4609
  Task category: event system
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Diane
  Description:

  Internal system of events from COM + has detected what a bad code back during his treatment.  HRESULT was 80070437 line 45 of d:\longhorn\com\complus\src\events\tier1\eventsystemobj.cpp.  Contact the Services de Support technique Microsoft to report this error.
  The event XML:

  
   
     
      4609
      0
      2
      16
      0
      0 x 80000000000000
     
      36861
     
     
      Application
      Diane
     
   
   
      d:\longhorn\com\complus\src\events\tier1\eventsystemobj.cpp
      45
      80070437
   
  

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Log name: System
  Source: Service Control Manager
  Date: 2011-08-20 16:51:03
  Event ID: 7000
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Diane
  Description:
  COM event system service + could not start due to the following error:
  The account specified for this service is different from the account specified for other services running in the same process.
  The event XML:
  
   
     
      7000
      0
      2
      0
      0
      0 x 80000000000000
     
      390554
     
     
      System
      Diane
     
   
   
      System event COM +.
      % 1079
   
  

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  Log name: Application
  Source: Microsoft-Windows-CertificateServicesClient-registration auto
  Date: 2011-08-20 01:24:41
  Event ID: 64
  Task category: no
  Level: WARNING
  Keywords: Classic
  User: n/a
  Computer: Diane
  Description:
  Certificate for the local system with footprint 4 7 54 42 2 a 43 1 a 20 36 77 0e b2 fa 58 58 44 cd fb db is about to expire or already expired.
  The event XML:
  
   
     
      64
      0
      3
      0
      0
      0 x 80000000000000
     
      36700
     
     
      Application
      Diane
     
   
   
      local system
      7 4 c a 54, 42, 2, 1 has 43 20 36 77 0e b2 fa 58 fb 58 44 cd db
   
  

  ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  Log name: System
  Source: Microsoft-Windows-DistributedCOM
  Date: 2011-08-20 15:23:12
  Event ID: 10005
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Diane
  Description:
  DCOM got error "1079" attempting to start the service EventSystem with arguments "" to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}
  The event XML:
  
   
     
      10005
      0
      2
      0
      0
      0 x 80000000000000
     
      390544
     
     
      System
      Diane
     
   
   
      1079
      EventSystem
     
     
      {1BE1F766-5536-11D1-B726-00C04FB926AF}
   
  

  Keep aside the papers, there are real problems with your computer?

  If so, can you describe the same thing in short?

  "Please contact Support Services Microsoft support to report this error." is a robotic message and generic. Nothing spectacular as such.

  In the meantime, scanner SFC on your computer:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• only install the services of forms and reports

  I need to run an application developed using Oracle Internet Developer suite 10 g on Windows.
  
  This application contains reports and simple shapes only.
  
  To deploy this application on the client machine, I want to just install oracle forms and report instead of application server services complete because the client computer PIII 1.0 GB of RAM.
  
  Everything is such Installer available?
  
  Where can I get it?

  I need to run an application developed using Oracle Internet Developer suite 10 g on Windows.

  If you have a very few clients (perhaps only?), you can use the machine where you have developed your application as your server. On the client you just need a browser.

• I keep losing my icon of internet explore. Loss of accessories and games on the start menu. Error message reports the necessary files from the service pack 3.

  Original title: internet exployer__

  I keep losing my internet exployer icon and do it for restoration from the xp CD... None of the usual methods of work.  I lost the games and accessories and can not restore the XP disc... error message indicates that he is of the necessary files from the service pack 3.  I installed sp 3 made a cd and tried to get it there and no luck

  Hello

  1 how long have you been faced with this problem?
  2 have. what troubleshooting steps you tried?
  3. What is the exact error message you get?

  Method 1: You can also try opening internet explore from the following location.

  C; \Programs Files\Internet Explorer\iexplore.exe

  Method 2: Create a new user account and check if the problem persists there.
  http://support.Microsoft.com/kb/811151

  Method 3: Also to run a scan for virus/malware online on the computer.
  http://OneCare.live.com/site/en-us/default.htm
  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• El Capitan report panic - what is the problem?

  Hello

  I get a random down once / day.  Any ideas? This generates:

  Thu Jun 16 22:07:03 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff800c51f5a4): "zalloc: map of exhausted area during the allocation of the kalloc.8192 area, probably because of the memory leak in the area kalloc.512 (2087137280 bytes, 4076440 elements allocated)"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.50.21/osfmk/kern /zalloc.c:2628.

  Backtrace (2 CPU), Frame: Return address

  0xffffff923786b950: 0xffffff800c4dab12

  0xffffff923786b9d0: 0xffffff800c51f5a4

  0xffffff923786bb00: 0xffffff800ca3eac6

  0xffffff923786bb40: 0xffffff800ca3ecde

  0xffffff923786bb90: 0xffffff800ca5ec1b

  0xffffff923786bbe0: 0xffffff800ca5f1b2

  0xffffff923786bc30: 0xffffff800ca5efab

  0xffffff923786bc80: 0xffffff800ca5efab

  0xffffff923786bcd0: 0xffffff800ca56897

  0xffffff923786bd20: 0xffffff800ca3f543

  0xffffff923786bd60: 0xffffff800ca85181

  0xffffff923786bd90: 0xffffff800caddf91

  0xffffff923786be00: 0xffffff800c599599

  0xffffff923786be30: 0xffffff800c4df283

  0xffffff923786be60: 0xffffff800c4c28b8

  0xffffff923786bea0: 0xffffff800c4d2665

  0xffffff923786bf10: 0xffffff800c5b8dca

  0xffffff923786bfb0: 0xffffff800c5ecc86

  The process corresponding to the current thread BSD name: CrashPlanService

  Mac OS version:

  15F34

  Kernel version:

  15.5.0 Darwin kernel version: kills Apr 19 18:36:36 PDT 2016; root:XNU-3248.50.21~8/RELEASE_X86_64

  Kernel UUID: 7E7B0822-D2DE-3B39-A7A5-77B40A668BC6

  Slide kernel: 0x000000000c200000

  Text of core base: 0xffffff800c400000

  Text __HIB base: 0xffffff800c300000

  Name of system model: MacBookPro11, 3 (Mac-2BD1B31983FE1663)

  Availability of the system in nanoseconds: 101477517411373

  Area name heart size free size

  VM 303062400 960 items

  machine virtual object hash 48308000 360 made

  VM 93689840 10240 map entries

  PageTable anchors 1564672 0

  55410384 8784 pv_list

  VM 262392256 38336 pages

  36005760 1840 Kalloc.16

  37759680 3072 Kalloc.32

  163029888 2352 Kalloc.48

  91691712 3456 Kalloc.64

  Kalloc.80 3860000 61120

  5613312 1824864 Kalloc.96

  264704000 2944 Kalloc.128

  3814560-7680 Kalloc.160

  275238912 4864 Kalloc.256

  Kalloc.288 300728160 16704

  Kalloc.512 2087137280 0

  2049884160 3072 Kalloc.1024

  Kalloc.1280 1615360 90880

  23142400 8192 Kalloc.2048

  Kalloc.4096 15081472 0

  Kalloc.8192 14221312 0

  19325376 2320 mem_obj_control

  SCHED groups 2094336 139968

  IPC 165611520 2400 ports

  2577776 522096 discussions

  x 86 fpsave State 1815424 461760

  1560624 405408 uthreads

  63170640 960 nodes

  27311520 4896 namecache

  Node 86305984 1257880 HFS

  Fork 27099136 6460032 HFS

  2743872 1964904 cluster_write

  5362560 595840 decmpfs_cnode

  ubc_info 18626784 4830584 area

  Knote area 1272960 72288

  vnode pager 613000 6884000 structur

  67235840 3584 compressor_pager

  34873344 1991680 compressor_segment

  Batteries of the kernel 3145728

  PageTables 391659520

  Kalloc.Large 308090670

  Backtrace suspected leakage: (bytes in circulation: 415744)

  0xffffff800c51f9df

  0xffffff800ca39a3b

  0xffffff7f8e8812f0

  0xffffff7f8e82027b

  0xffffff7f8e80cab7

  0xffffff7f8e8c3cb9

  0xffffff7f8e81136a

  0xffffff7f8e81228c

  0xffffff800cadfa07

  0xffffff800c597eb0

  0xffffff800c4df283

  0xffffff800c4c28b8

  0xffffff800c4d2665

  0xffffff800c5b8dca

  Extensions of core in backtrace:

  com.apple.iokit.IOAcceleratorFamily2 (205.10) [949D9C27-0635-3EE4-B836-373871BC62 47]@0xffffff7f8e7fc000-> 0xffffff7f8e867fff]

  dependency: com.apple.iokit.IOPCIFamily (2.9) [D8216D61-5209-3B0C-866D-7D8B3C5F33FF] @ 7f8ccf6000 0xffffff

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f8d3b7000

  com.apple.GeForce (10.1) [3CE13029-AC19-3C15-BAC6-66736DBFD34D] @0xffffff7f8e87600 0-> 0xffffff7f8e912fff

  dependency: com.apple.iokit.IOPCIFamily (2.9) [D8216D61-5209-3B0C-866D-7D8B3C5F33FF] @ 7f8ccf6000 0xffffff

  dependency: ffff7f8d3fe000 @0xff com.apple.iokit.IONDRVSupport (2.4.1) [1114B99F-E439-329E-876D-1FEC4CF45DF6]

  dependency: com.apple.nvidia.driver.NVDAResman (10.1.0) [8649777A-3EED-3F2F-8B12-FBC5517F62E6] @0xffffff7f8d415000

  dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [172C2960-EDF5-382D-80A5-C13E97D74880] @0 xffffff7f8d3b7000

  dependency: com.apple.iokit.IOAcceleratorFamily2 (205.10) [949D9C27-0635-3EE4-B836-373871BC62 47]@0xffffff7f8e7fc000

  last load kext to 98145740679899: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f8f608000 size 32768)

  Finally unloaded kext to 98212253748536: com.apple.driver.AppleXsanScheme 3 (addr 0xffffff7f8f608000 size 32768)

  kexts responsible:

  org.virtualbox.kext.VBoxNetAdp 5.0.20

  org.virtualbox.kext.VBoxNetFlt 5.0.20

  org.virtualbox.kext.VBoxUSB 5.0.20

  org.virtualbox.kext.VBoxDrv 5.0.20

  com.techsmith.TACC 1.0.3

  com.Razer.Common.razerhid 14.44

  com.3Dconnexion.driver 10.3.1

  com Apple.filesystems.afpfs 11.0

  com Apple.NKE.asp - tcp 8.0.0

  com Apple.filesystems.NTFS 3.13

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.ApplePlatformEnabler 2.6.0d0

  com.apple.driver.AGPM 110.22.0

  com.apple.driver.X86PlatformShim 1.0.0

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.iokit.IOBluetoothSerialManager 4.4.5f3

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleOSXWatchdog 1

  3.12.7 com.apple.driver.AppleGraphicsDevicePolicy

  com.apple.driver.AppleHDA 274,9

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.GeForce 10.1.0

  com.apple.driver.AppleIntelHD5000Graphics 10.1.4

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.driver.AppleLPC 3.1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleCameraInterface 5.46.0

  com.apple.driver.AppleSMCLMU 208

  3.12.8 com.apple.driver.AppleMuxControl

  com.apple.driver.AppleIntelFramebufferAzul 10.1.4

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleUSBTCButtons 245,4

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleUSBTCKeyboard 245,4

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AirPort.Brcm4360 1040.1.1a6

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.security.SecureRemotePassword 1.0

  com.apple.iokit.IOUSBUserClient 900.4.1

  com Apple.kext.Triggers 1.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.driver.CoreCaptureResponder 1

  com.apple.driver.DspFuncLib 274,9

  com.apple.kext.OSvKernDSPLib 525

  com.apple.nvidia.driver.NVDAGK100Hal 10.1.0

  com.apple.nvidia.driver.NVDAResman 10.1.0

  com.apple.iokit.IOSurface 108.2.1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.5f3

  com.apple.driver.AppleHDAController 274,9

  com.apple.iokit.IOHDAFamily 274,9

  com.apple.iokit.IOAudioFamily 204.4

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  3.12.8 com.apple.driver.AppleGraphicsControl

  3.12.8 com.apple.AppleGraphicsDeviceControl

  com.apple.iokit.IOAcceleratorFamily2 205,10

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com.apple.driver.IOBluetoothHIDDriver 4.4.5f3

  com.apple.iokit.IOBluetoothFamily 4.4.5f3

  com.apple.driver.AppleUSBMultitouch 250,5

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.CoreStorage 517.50.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  com.apple.iokit.IO80211Family 1110.26

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBXHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBXHCI 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: MacBookPro11, 3, MBP112.0138.B17 of BootROM, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, MSC 2.19f12

  Graphics card: Intel integrated Iris Pro, Intel Iris Pro,

  Graphics card: NVIDIA GeForce GT 750 M, NVIDIA GeForce GT 750 M, PCIe, 2048 MB

  Memory module: DIMM0/0 BANK, 8 GB, DDR3, 1600 MHz, 0x02FE,--

  Memory module: DIMM0/1 BANK, 8 GB, DDR3, 1600 MHz, 0x02FE,--

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 134), Broadcom BCM43xx 1.0 (7.21.95.175.1a6)

  Bluetooth: Version 4.4.5f3 17904, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SM0512F, GB 500,28 SSD

  USB device: USB 3.0 Bus

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  USB device: Razer Naga Hex

  Bus crush: MacBook Pro, Apple Inc., 17.1

  Kernel panics are mainly due to material defects or incompatible kernel extensions.

  Your tip to memory problems (zalloc is an allocation call memory), but that might be caused by kernel extensions, you have installed:

  com.techsmith.TACC 1.0.3

  com.Razer.Common.razerhid 14.44

  com.3Dconnexion.driver 10.3.1

  I don't think that it is VirtualBox as it seems to be updated and I saw no panic reported in this version.

  First, try to remove the above kernel extensions by using the uninstall program that is provided by the developer of these applications.

  The other possibility is your RAM. He reports not a model number, it can be a problem. As you can not replace the RAM, you may be able to bring to the Apple Store to test.

• Hi me Mamadou Moustapha I bought apple that i phone 6s a few days find out who the best phone of the world, because the day I bought it, I had questions on screen and when I went to the service center, they said they're going to update they have updated o

  Hi me yedess apple that i 6 s phone few days back knowing have the best phone in the world since the day I bought that I have questions on screen and when I went to the service centre they said they're going to update, I bought they updated after that I have the same problem now they say they're going to fix very terrible situation for apple this new product which has manufacturing defect they will repair, I asked to change device they deny because they want to fix m single i face the problem of the first day of the customer are powerless and that they only make just crazy.

  It's what warranties are for. If you bought the phone from Apple or an Apple authorized reseller, iPhone, you have 14 days to return it for a refund. After that the Bank should replace the phone. If you did not buy from Apple or a shop authorized, you must respect the terms of this store. However, Apple will always replace the phone, if you contact them directly.

• Impossible to activate the services web ePrint for Color LaserJet M551

  Hello

  I read all the posts in this forum about the web services enabling ePrint to the question and tried all suggestions with no luck.

  Here's the situation:

  1. The printer works fine on place. I can print without problem.
  2. The printer is connected.
  3. All my router ports are open for outbound connections, including UDP.
  4. Communication using log in my router I can see that the printer can resolve DNS names using either my ISP DNS server or the suggested 8.8.8.8 and 8.8.4.4. Using nslookup shows ' registration-pro - site1print.houston.hp.com "Decides to 15.240.60.111 and" registration-pro - site2print.houston.hp.com "Decides to 15.201.224.79.
     This indicates that the printer can indeed resolve the addresses. Newspapers also Awakenings that the printer communicates with the servers (connection is established and data transferred) via https (probably the web service), but always after a few minutes the clearance process is to expire.
  5. I tried this allowing the procedure since a few days my believe that the recording servers should have worked some time during this period.
  6. I'm frustrated
  7. .. .even more frustrated
  8. what I am doing wrong?
  9. Help, please!

  trying to install eprint for my new M551dn Color LaserJet and it fails with the

  Who out there having the same problem I had. HP could not help me I restore to factory settings and reconfigured everything and all of a sudden the printer managed to enable web services and print the print code.

  Good luck to you face the same problem!

  / MrQQ

• Windows 7 Home Premium x 64: activation of the service Windows Update crashes my computer after upgrade RAM

  A few days ago I had two sticks of 2 GB GSkill RAM by mail. Here's the same brand, model and size as the pair currently installed (obviously). (Sticks alternate according to the specifications of the card from my mother)

  After you have installed the new RAM and the computer starts up, it freezes within about 30 seconds of connection. Before installing the new sticks, I had no problem whatsoever.

  My first thought is that I sit the RAM properly, then I go and reinstall it. I start, and the same thing happens.

  So obviously this RAM must be bad, right? When I take out news, not gel. Ah, but when I remove the OLD stuff and use new instead, I ALSO no gel. So maybe it is not the RAM.

  Then I reboot in safe mode. No gel. Interesting. I opened the window 'System' and it says "memory (RAM) installed: 4.00 GB ', which is correct." I opened CPU - Z, and it reports also 4 GB of memory. I run a few hours and have no problems whatsoever. So I say to myself, there must be either a Windows service or a 3rd party service is causing the issue and not the new RAM.

  I disable all services of 3rd parties and restart in normal mode. It freezes. OK, so maybe (though unlikely) I have a virus any (I say probably not because I have to) run the module additional firefox NoScript, and set to block all flash, javascript, xss, iframes, etc. - in other words, only allow to my whitelist and B) I have Windows Firewall and running McAffee and updated.). But I decided to first try Windows services for the hell of it.

  So I enable only the services that start in safe mode as my reference, disabling the rest via services.msc. I start normally and not gel. Great, then maybe it is a Windows service. I start which allows one service after another without any problem. I get to the bottom of the list and select the Windows Update service. Within literally 10 seconds my computer crashes. Large.

  As a validation test, I put all services back to the base line of safe mode and only allow Windows Update. I start normally, and again once it freezes.

  Another test of validation, I start with all normal, but disable Windows Update. Do not freeze. I'm going to start Windows Update. Yet once, it freezes for about 10 seconds. So clearly something is in place.

  As a third and final sanity check, I remove the new RAM and run a Windows Update. He finds a few optional updates, but not critical. My system is up2date.

  My only attempt to solve this problem so far was to backup all Windows Update DLLs (C:\windows\system32\wu*.dll, although I don't know if these are good) and do a scan sfc to replace them with copies of 'good '. It did not work.

  So my question is:

  Why cares Windows Update that I have 4 GB of memory installed?

  Thank you

  Jon

  1. I 'upgraded' from the RC of Windows 7 x 64 for Win 7 x 64 Home Premium.

  2. I use McAfee VirusScan Enterprise 8.7.0i, DAT version 6060, Scan Engine 5400.1158

  3 No.

  4. No, I put together this computer myself.

  ______________________

  To answer my previous posts:

  I think the USB storage is a separate issue. And.

  I think I * may * have solved the problem of origin with one or more of the following (don't know who):

  • Updated the software of the chipset of the card from my mother.
  • Updated HD Windows audio drivers to the recommended ASUS (Realtek) HD audio drivers
  • Updated since Windows installed NVIDIA display drivers for version NVIDIA WHQL.
  • Increased my tRFC (refresh time of line) to 70 52 clocks clocks. Set my GSKILL DRAM voltage recommended by 2.1V. Off the SPD DRAM configuration (I read that ASUS is not entirely based on the SPD and can affect things on its own).

  I had WU for 20 minutes from writing this post without a freeze, so we'll see. (Previously, it would freeze within 10 seconds of turning on WU)

• I'm stuck in reboot loop after trying to install one of the service packs, my cd rom is not working and I don't have a windows cd anyway, I tried to disable automatic reboot, but it does not work, I am running vista

  get service pack was not installed recovery changes and restart without end, once more I have no cd of windows and my rom is not working anyway, it really is _ me off, my computer was useless for days now and I have a very important job out there which is essential to my work. Thanks a lot for windows, I'll be switching os very soon

  Hi Asdlfjasdfjlasdf,

  How did you install ServicePack initially?

  You can try to start safe mode and try to perform a system restore.

  Step 1:

  For a safe boot, you can follow the below given steps:

  1. remove all floppy disks, CDs and DVDs from your computer and restart your computer.

  Click the Start button, click the arrow next to the button lock and then click on restart.

  2. do one of the following:

  a. If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  b. If your computer has multiple operating systems, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  3. in the display Advanced Startup Options, use the arrow keys to select the option of safe mode you want and press ENTER. For more information about the options, see startup options (including safe mode).

  4 log your computer with a user account with administrator rights.

  When your computer is in safe mode, you will see marked Safe Mode in the corners of the screen. To leave safe mode, restart your computer and let Windows start normally.

  If you are able to boot to the desktop in safe mode try doing a restore of the system at a point when the computer was working fine.

  For more information on Safe Mode, follow the link below:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  After you perform a restore of the system try to boot into normal mode and then download the standalone vista service pack and try to install.

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Once it is finished downloading the pack of autonomous before installing the service pack disable security software, the system n clean boot, and then install the stand-alone pack. Once the installation is complete normal startup mode and re activate the security software.

  If you are not able to perform the above steps then you will need to take your computer to the technical workshop and get it rectified.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  Once you restart to try Office Outlook and see if you get the same error message. If not then follow the divide and conquer method mentioned in the article about which program is causing the problem.

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you have completed the installation of the service pack, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Could not connect to the service user profile Service.

  I have a little disconcerting problem.  Every day or two, I can not connect to Windows correctly.  When I start, select my account (which is also the unique administrator account) and enter my password, it spends an abnormally long time in the 'Starting Windows' screen, then I get the following message pop up in the notification area:

  "Unable to connect to a windows service.
  Windows could not connect to the service user profile Service.
  This problem prevents limited users to logon to the system.
  As an administrator, you can review... »

  Shortly after this message, I get a windows error message saying:

  "Location is not available.
  C:\Windows\system32\config\systemprofile\Desktop is not accessible.
  Access is denied. »

  This seems just a desktop computer black with only the Recycle bin icon on it, and the old Windows Start button in the taskbar.

  While trying to understand what is happening, I looked into the application of 'Problem reports and solution' in the control panel and found that every time this happens, I also have a corresponding event of "Stopped working" "Routing and remote access.

  I then restart using F8 at startup and choose the one that says something to the effect of "using the last good configuration known."

  I'm not sure what that means at all, but I hope that one of you people can help.

  Thank you!

  Hello any Leafs fan,

  Thanks for posting on the Microsoft answers Forum.

  Looks like you're running only because of using a system restore to get back when your system is running. Now, you want to know what caused it.

  Usually, when the above error occurs, it is due to a corrupt user profile.
  The best way to fix this is to remove the user profile.

  • Go to the Start button
  • Right click on computer
  • Go to the properties
  • Go to Advanced System Properties on the left pane
  • Select the Advanced tab
  • Go to the user profile Section and click on the settings button
  • Find the profile for the that you want to remove and click Remove.  (It's the best way to remove the local profile in Windows Vista).
  • Connection again and you will get a new profile.
  • To get your Favorites return, go to the old profile in C:\users and copy the data manually.

  The only way to identify what caused the error with the user profile is to try to reproduce it.

  If you have not installed the update of Windows, then you can go to Windows updates and see what are the updates must be installed and manually download them and install them one at a time. Between the installation of the system, make sure you have a restore point that you can go back to if necessary. Once an update is installed, then close and open a session back (or reboot if required by the software update) and see if you get the error user profile. If the error occurs, then go to Services and see if the user profile service is running and set to automatic.

  If you are not able to do anything when the problem occurs, then try to start in safe mode using the F8 key and see if the problem occurs in safe mode.

  You can also look in the event viewer to see if there is no dealing with event profile user or Windows Update errors.
  To get to the event viewer, you can type in eventvwr.msc in the box start the search. This will bring up the event viewer and you can view the summary logs and see what kind of errors you encounter.

  Please post with your results and if you need further assistance.

  Sincerely, Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem starting for the Service of Notification of system events

  Computer Vista Home Basic.

  The SENSE is reported as won't start do not.  Looking at the Services screen we're still in the starting state.

  How can he start correctly?

  Hello

  First thing I'd do is uninstall all the HP software, eliminate him as possible points of contention. If possible, also do a system restore to a point before for the initial installation.

  This service would not affect internet connection as such, it watches DCOM, it is not fire events to network. My thought is that the HP software has caused a problem with DCOM, then removing is the first step. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Is it possible to integrate the service pack 2 for Windows Vista?

  Hello

  I bought a full copy of Windows Vista Edition full in 2007 but I have not yet used.  Since the recent availability of Vista Service Pack 2, I wonder it would be possible to combine or integrate service pack 2 with my Windows Vista Ultimate DVD disc to a new blank DVD disc?  In other words, I would like to create a new Vista DVD installation disc that combines my copy of Vista Ultimate with the new service pack 2. Thus, I would avoid the process laborious and tedious installation service pack 1 and service pack 2 on windows updates.  Or do I need to have a copy of Windows Vista with service pack 1 preinstalled DVD disc before attempting to integrate service pack 2?  Please note that my installation of Windows Vista Edition full DVD disc has no service Pack1 preinstalled.

  I know that this was possible with Windows XP but some kind I've read reports recently that it is not possible with Vista because service pack 2 is not a cumulative update and the service pack 1 must be installed before you attempt to integrate service pack 2.  Is this true?

  I would be obliged if anyone out there can clarify this issue.

  Thank you

  Martin

  Slipstream Vista SP1

  http://www.Vistax64.com/tutorials/151606-Vista-SP1-slipstream-installation-DVD.html

  Slipstream Vista SP2
  http://www.Vistax64.com/tutorials/230249-sliptream-Vista-SP2.html Rob - support element, Cascade Bicycle Club P.O. Box 15165, Seattle, WA. 98115-0165 206-522-3222-24 hr hotline 206-522-BIKE http://www.cascade.org

• Unable to do the Windows updates, error "Windows Update cannot currently check updates, because the service is not running.

  Only the news I get is an information box stating:

  "Windows Update cannot currently check updates, because the service is not running." You may have to restart your computer. »

  I checked that the service is running, and a process is running in the Task Manager.

  I have downloaded and run Microsoft Fix, it is said that it fixed the problem, but didn't.

  I cloned my old drive and installed my new drive in my laptop. It seems that there is no update history transferred when cloning, there is no history of updates now.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. The 'leftovers' Norton may be causing the problem. Roll up your sleeves & cross your fingers...

  [You can print these instructions for reference offline. If a step said to reboot, reboot! ]

  ACTIONS

  1 right-click on the link, select SAVE TARGET as.... & download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall Norton 360 and LiveUpdate and all Norton Add ons via Start | Control Panel | Programs: Programs and features.

  4 IMPORTANT! -Online enable WF immediately after the reboot!

  NB: Now you're "working without a net": do not to ANYTHING else online (e.g., navigation reading E-mail; cat) until you have finished step #7 below!

  5. right click on the file that you saved in step #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: do NOT activate or install Norton modules or toolbars (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run (Norton) LiveUpdate until you get a prompt "no update more".

  8. click right on the following link & SAVE to download to your desktop: http://iefaq.info/attachments/133/ie8-rereg.zip [1]

  8B. do a right-click on the file downloaded in # 8 a above (that is, ie8 - rereg.zip) and EXTRACT its contents to the desktop. This will create a new folder on your desktop.

  8. close all open applications (that is, anything with an icon on the task bar), open the new folder created in # 8 b above & double-click on the script (i.e., ie8 - rereg.cmd) to run the command, then restart again.

  9. open Internet Explorer (only!) to http://support.microsoft.com/kb/923737 [ignore the warnings of DO NOT APPLY and the section will APPLY to] & run the difficulty.

  Note => for best results, check the option Remove personal settings .

  10 a. open Internet Explorer (only!) to http://support.microsoft.com/kb/910336 [ignore the title & symptoms].

  10 b. do disappear/close the window pop up "Automated troubleshooting"! -then...

  c. 10, regardless of the "not recommended" or similar warnings, run difficulty he 50202 in DEFAULT modes and AGGRESSIVE. [2]

  11 restart one last time & test by launching a manual check for updates.

  12. in response to this post with a status report - hopefully confirming that all six of the April 6 & March 2012 is installed correctly now.

  ===============================================================
  [1] trust Source: http://iefaq.info/index.php?action=artikel&cat=42&id=133&artlang=en [good for IE9, too!]

  [2] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

• How can I activate the service Super Fetch in Vista?

  How can I activate the service Super Fetch in Vista?

  It is enabled by default.

  Unless you've been play :)

  Click on the round and type msconfig in the box of Vistas 'search' at the bottom left. Click the msconfig program to open.

  Click on services and make sure that Superfetch is in the list and makes TIC TAC and the report to display running.

  If she does everything right.

• With all the services activation problems. Error 0xC004E003.

  Original title: activation with the service package problems

  OK here is my problem I have Windows Vista Home Basic, was if she had for a long time now on my computer then windows out of the Blues jumped to the top with it needs to install a service package, now, I got XP on another computer, I know that there are a set of services on your computer, so I went to install the package of Service 1.  The package installed properly (took all night) and when I connect it tells me that there is an error.  description 0xC004E003 The Software Licensing Service reported that license evaluation failed.  That means that I'm going to the Windows update it verified whenever I went there, I downloaded all some updates on the Microsoft site and was the one to get these downloads is to get your computer checked and mine happened all the time, but now this service package that makes me not being able to get on my computer , I got this computer as 3 years I think that I bought at wal-mart somewhere don't remember, I got the installation disc, but I don't want to restore my computer there's stuff on my computer I can NEVER get back if I do it and I can not help me please my email is Email removed for privacy and I can't put my product key the internet, you know what I mean everyone there LOL :)  The product key is on the bottom of my laptop.

  Uninstall Service Pack 1 and install Service Pack 2.

  After you uninstall Service Pack 1 choose a Restore Point dated before when you installed SP1 and use that restore point.

  Then install SP2 by uploading it on a folder: http://technet.microsoft.com/en-us/windows/dd262148.aspx

  And then double-click the .exe file to install SP2.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.