Similar Questions

• Thunderbolt Display Firmware update could not complete.

  Hello.

  Am myself a brand new Mac Pro recently and I'm loving it. Hooked up to my old TB screen which is unused to cause a few months the all-in-one cable is broken. Not much, I bought a cable TB, and used only to plug it in and it works fine.

  That is, until I went in the App Store and noticed a firmware update for display among all other system updated. I do not think that anything of it in time and just continued to download and install all updates in bulk. Well, after all has been said and done I got the popup saying he could not apply the on-screen since it must route the cable all-in-one to do. Not a problem, I thought, it's not that important to me it is installed. But now after whenever I restart the machine, I get the annoying popup even in my face, no matter what I try to do to remove it. I'm fine with not getting updated, I just want this bitch popup go away!

  I am a very advanced user, so I am not against the orders of terminals and/or editing plists performer or that you have to solve this problem. I don't know where to look and I thought this would be my last ditch effort fixing before you say screw it, wipe the system and start over. If no preview of this would be useful. Thank you.

  Apple doc:

  Thunderbolt Firmware Update 1.2: continues to reappear and Thunderbolt ports and target Display Mode may not work

  After the installation of Thunderbolt Firmware Update 1.2:

  • The Thunderbolt ports may not work.
  • Target display mode may not work.
  • The update can keep reappearing as available for download.

  This happens when one Thunderbolt self-powered (other than one directly connected Thunderbolt display) device is connected to a Thunderbolt port during the installation of the update. To resolve this problem:

  1. Shut down your computer.
  2. Disconnect all devices Thunderbolt.
  3. Wait for 10 seconds.
  4. If you use a Mac mini with a Thunderbolt screen, reconnect the Thunderbolt display directly to your computer via the Thunderbolt port. Do not connect other devices Thunderbolt at the moment.
  5. Restart your computer.
  6. If sight Firmware 1.2 update is available, download and install and restart your computer when asked. If the update of Thunderbolt is not available, the update has been successfully installed.
  7. Reconnect all devices Thunderbolt.

• Portege R400 - Firmware update fails for 3G card

  During the Firmwareupgrade of the G 3 embedded (expedite EU870D) in my protégé R400 card, I have a power fail. The next time you start, I can't countinue with the upgrade. The card no longer works.

  The Modem and the COM Ports, I don't see in Device Manager. Is there a solution for this error? Thanks for the help!

  Pumbkin

  Why do the update of the firmware?
  You should do this only if the Vodafone SIM card does not work properly!

  I found this info that pop ups before performing a firmware update!

  + Atten-tion of the FW update: +.

  + Please do not forget to read carefully before place the FW. +

  + 1. FW update is not necessary when the Vodafone SIM card works fine in the customer environment s. run the FW update only when the Vodafone SIM card is not detected. Please note that the FW is more reversible to the previous state once updated. +

  + 2. This upgrade tool will apply to the following models with built-in 3G module: +.

  + Portege R400 +.
  + Portege R500 +.
  + Tecra M9 +.

  + 3. Please leave 3G communication and close the connection utility before running the FW update. +

  + 4. Close all applications before you run the FW update. Please DO NOT launch any application during the upgrade process. +

  + 5. Please ensure that you use an AC adapter to power the computer during the process of FW update. Power failure during the upgrade process can lead to failures of 3 G modem. +

  + 6. Please DO NOT sleep/standby extended/Shut Down the computer during the process of FW update. This can lead in mode 3G +.

  So please first these points before you is trying to update the firmware!

• GS716t V2 firmware update download for switch

  Hello

  in recent years, I have visited this site.

  I'm trying to update my 716v2 to version firmware, version 18 running 19.

  Using http download I can select the extracted the zip as a .stk file but the downoad never starts.

  I tried this a Mac and a PC running in parallels on the MAC and nothing happens.

  If left long enough the session times out.

  I forgot to add this switch has 2 VLANS active and I'm doing the upgrade of the designated vlan.

  Ian M

  Hi people,

  fixed the problem of say it both on the switch. The sad thing about the firmware update process is the lack of process indicators.

  After updating the switch sees a little faster and yes it has been restarted recently to overcome locking port that would not speak directly to a processor intel NIC on the firewall, but through a 'normal' switch

  Ian

• USRP RIO 2953R firmware update

  Hello world

  We use NI USRP RIO 2953R with LabView 32bits. We are trying to run the example, the VI "niUSRP EX Rx Async.vi continues", but it returns an error in the GUI.

  Open Session.vi Rx niUSRPa runtime or configuration error.
  Code: 1440
  Details: RuntimeError: should FPGA number 0 x 6 compatibility, but got 0x9.0:
  The build FPGA is not compatible with the host code generation.
  As an administrator, run:

  "C:\Program Files (x86)\UHD\lib\uhd\utils\uhd_images_downloader.py.

  I guess I have to perform a firmware update to run the example VI, because he said that it indicates if the utility of Configuration NI USRP. Please also the attached photo. However we do not know what image file to download or burn. In contrast, we find also that the manual suggests not the firmware update for NI USRP 294 x or x 295 if you want to change the behavior of the FPGA?

  Do you know how I will deal with him?

  Rui

  Hello

  1. make sure that "Update Needed" message persists even after reboot of the device and and re-enumeration of the device by using the utility of Configuration of NOR-USRP.

  2. If the message persists, go to the tab 'Image Updater'.

  3 and select the device that you want to update the image on. Once you select the device that the path of the image will be automatically updated. If it does not go through this path of the image: "C:\Program Files (x 86) \National»

  4. write the image in the camera.

  5 restart the device and re - list and check that the "Update Needed" message no longer exists.

  Thank you.

• OfficeJet Pro 8600 Premium Firmware update

  Hello:

  Known issues with the recent firmware updated for Officejet Pro 8600 Premium of CLP1CN1150CR to CLP1CN1322CR?

  I created the shortcut on the desktop and have printed the presentation and installation Instructions. The printer is connected locally (via USB) to my PC from main office (where I do the upgrade). And I will follow the instructions to make a break my firewall (KIS2013).

  It looks like a simple process, but flashing firmware & BIOS updates on material/mobos make me always disgusted.

  So I'm just now - inquire in advance - of known issues with this particular update or the update process? Thank you!

  daledoc1
  ------------------------------
  OfficeJet Pro 8600 Premium (USB-hand DT & wireless-LT)
  OfficeJet 7410 (USB-old DT & wireless-LT) - still works very well!

  view 58 and no response? Bad luck.

  Well, too bad.

  I guess it is "resolved", I advanced and performed the update.

  I pause my AV/Firewall during installation.

  It took about 5 min or less via a USB connection.

  Also, I restarted the computer after being full, like the phone that recommended technical support, even if restarting is NOT listed in the instructions.

  It seems to have been successful.

  Thanks anyway!

  P.S. for anyone who needs to do this, please don't forget to read the instructions, in particular the warning to the 8600 a connection to the computer via hard wire (ethernet or USB), no wireless. (I don't know if the update could interrupt or not, or if the printer would be damaged if we tried to do wireless).

• Sansa Firmware Updater fails to install on my PC

  Hello world

  I can't install the update on my pc.

  This is what he wrote when it fails: "Downloding last sansa updater...»    X '.

  "The installation fails. "Please try again later".

  I have tried many times in the past 24 hours and its still the same.

  My pc is clean no viruses, spyware, etc., well maintained, firewall does not block it.

  Any suggestions?

  Most here do not recommend the use of the update. It's a resource hog that will slow your system down and nag-ware is most of the time as whenever you plug your player will be 'phone home' looking for updates. Firmware updates are not very numerous and widely spaced and manually updated (or reinstall) updates usually takes less time than downloading and installing the update.

• Sansa Firmware Updater fails to install every time...

  I have had my Sansa View for about 2 months now. I have never been able to install the Sansa firmware update. It seems to go through all the steps, then suddenly steps back on the "download the latest Sansa Updater" and says that failed (once just a second before this step was completed successfully). It seems to with success download it, install it, then save, then he can make another step or it may fail on the registration... I can't. All the steps after downloading disappear and now it says that the step does not and gives me the error message "Installation failed. Please try again later. "I think 2 months is much later...

  I am running Windows XP SP3 32-bit. The windows firewall is disabled and I use COMODO Internet Security and I use Avira Antivirus. I tried to disable the firewall and the antivirus just to see if they are the cause of the problem, but it has no effect on the results of the installation. In addition, COMODO logs do not show any activity blocked the Installer (or whatever it is blocked at all today). My account is an administrator account.

  Now, I think it should be noted that I don't need an update of the firmware. My player integrates the latest version from the website. What I really want is to convert my videos so that I can use them on the player. Unfortanetly there is no way to install the Sansa Media Converter without installing the Firmware Updater (ahh... how many times I tried wasn't the case... but alas...).

  Any help would be appreciated. Thank you.

  SOLUTION: I found a thread on the forum of Sansa View that describes the required parameters for the conversion of the video correctly to play on my device. (Here: http://forums.sandisk.com/sansa/board/message?board.id=view&thread.id=3300) Given that I don't need to update my firmware (and lets hope I don't) it is a perfect solution for me (especially considering the horrible things I've heard of the SCM).

• HP Pavilion Elite m9060n or m9060la Desktop PC Bios and Firmware update

  This computer came with Windows Vista pre-installed

  Now I'm running Windows 7,
  What I downgrade to Vista to update the Bios and the Firmware of my hardware?

  Or the drivers Bios and Firmware Update (.exe files) are fully compatible with Windows 7?

  What suggest you the update in Windows Vista or Windows 7?

  NVIDIA GeForce 8500 GT video BIOS update
  IPIBL - LA motherboard BIOS update
  HL-DT-ST GGW - H10N BD Writer / update the Firmware of the HD DVD-ROM drive

  SAY THANK YOU WITH CONGRATULATIONS

  Macias
  -Please do not use TinyURL my firewall blocks them.
  Click on the star of CONGRATULATIONS on the left, if I helped you. Please mark as RESOLVED, if your question has been answered.

  Hello

  starwarsmex wrote:

  You are right!!!  If it is not broke, don't fix it! But to be honest, I did not play any Blue Ray DVD on my computer, so if a problem exists with the current firmware of the device I need to do? or just curiosity, I'm sorry I lose you, update/upgrade uses the drivers to recommend running the operating system preinstalled in this case Windows Vista?

  If problems exist, then try to upgrade with the appropriate firmware listed in the driver version Vista.

  Some of the improvements will work and others cannot.  It is unfortunate but it is like that between Vista and Windows 7.

  But... If everything works well, change the drivers and/or firmware and invite trouble.

  Best regards

  ERICO

• HP Laserjet CP3525 Firmware update failure

  I tried to update the firmware on a HP color Laserjet CP3525 using a USB connection by following the instructions that were posted on the HP website for the update of the Firmware.  It seemed that everything was fine, but when the printer is restarted it never gets past 6/6 on the LED display screen.  I left the printer in this condtion for several hours and it never gets beyond this area. I guess the upgrade of the Firmware caused the printer to do a hardware failure and is not recoverable, but I hope someone might be able to help get this back to the top and work.  Any help would be greatly appreciated.

  Well, in general if the firmware update was interrupted for some reason any it would lead to this. This may be caused on the side of the computer (rebooting/logging out/end of the process until it's full) or the cord to which you are connected with, it is damaged in any way or not well focused in the USB ports.  I'm sorry you're in this situation, I understand that in a situation with limited spending caps, you would have legitimate to update concerns your other machines.

  If you have any questions or problems I or one of my colleagues are on this forum almost 24/7.

  I hope you have a wonderful rest of the week, Bob!

  -Spencer

• Firmware Update Notification printers to Laser - real or HOAX?

  I received an email listed starting from: Hewlett-Packard [email protected] that indicates an update of the firmware is strongly recommended for laser printers prevent malicious activity. I find nothing at HP about it. Is this update for real? I don't want to click on the link (Firmware Update enabled by default at this link):
  http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03102449). ) and end up being a victim of phishing or worse. Here is the content of the email:

  Dear Dear customer of HP's LaserJet.

  HP recently announced the possibility of a certain type of
  unauthorized access to some HP LaserJet printers. The potential
  This unauthorized access is for peripheral on a LaserJet
  Public Internet without a firewall, or for LaserJet devices in one
  private network, if a malicious effort is made by a party on the
  private network to change the firmware of the device.

  If no customer has reported to access HP, HP has
  built a firmware update to minimize this problem. To get the
  latest firmware for your product, access bulletin HPSBPI02728
  SSRT100692 - some printers HP and HP Digital Sender, remote control
  Firmware update enabled by default at this link:
  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03102449

  Then:
  1. find your product in the table
  2. If an update is available, you can click on the embedded link.
  It will take you directly to the web page where the Firmware
  update is available.

  Update the firmware of your product by following the instructions included
  in the Readme file for the firmware image. If you are a HP
  Managed Print Service customer, please contact your managed
  provider of printing services, which cannot install the update of the firmware
  For you.

  Because the safety of our customers is paramount to
  HP, we reiterate our recommendation to follow best practices for
  mounting devices. This includes placing them behind a firewall printers
  and, when possible, firmware remotely disabling download capabilities
  printers exposed.
  Additional information is available at http://www.hp.com/go/secureprinting

  Hello:

  I would contact HP technical support on this issue, if you are not very sure.

  Support bulletin seems legit to me.

  As I was connected the HP support Forum, this bulletin web page acknowledged that I signed.

  If it wasn't true, I doubt that this would have been possible, as these pages are tightly linked through HP Passport sign in System.

  Also look at the list of models to ensure that yours needs updating.

  If you decide to run the update, make sure that you follow all the procedures to the letter.

  An update of the firmware which has gone wrong will permanently damage your printer and most likely makes it unusable.

  Paul

• firmware update

  I tried updating my two cinema Display on my iMac (27 inch, end 2013) iMac Intel Core i7 3.5 GHz 32 GB 1600 MHz DDR3 NVIDIA GeForce GTX 775 M 2048 MB tons of time, using all possibilities, but unfortunately not worked.

  What is happening with this firmware?

  Hello RUBENSCOSTA,

  Thanks for this info and choosing the communities Support from Apple. I know how important to get your Cinema Display works again is for you!

  If I understand correctly, you are unable to update the firmware on the LED Cinema Display. I would like to try the following steps to get these working again:

  1 make sure that your iMac has all available firmware updates installed as well:

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor

  2. try to follow the process in this article on the updating of the LED Cinema Display Monitor:

  On the 27-inch LED Cinema Display Software Update 1.0

  3. If you're still having problems, you can see the general troubleshooting guide:

  Get help with your Apple Cinema Display Monitor

  See you soon!

• Airport Express firmware update

  I had a Firmware Update for my Airport Express.

  How can I update? I can only choose ignore, do not to update. In other words, what I did now.

  Zu-updates information to update Firmware as airport-Basisstationen - Apple Support

  It's funny. I think it's a bug.

  Airport-Dienstprogramm 6.3.6 on El Capitan

  "You are not allowed to create or update this content" - funny too.

  This firmware it works now?

  What model is the Express?

  You can do it manually even if it is a bit complicated.

  Re: proxy server annoy 7.6.7 update?

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• TimeCapsule Firmware update 7.6.4 is not possible

  on my Timecapsule is not possible firmware update.

  Airport utility shows me that there is an update, but I have no button to update.

  

  Hold down the option key and click two times on the base station. before an option there will be updated to version, click on it.

  The system will reboot and firmware will be updated.