Satellite A100 PSAANE-> after downgrad to XP need driver LAN

Similar Questions

• Satellite A100 - 1 k 7: Atheros 5007eg need driver for Ubuntu Linux 7.10

  Hello

  I am the proud owner of a laptop A100 - 1 k 7 upgraded with a total of 2 GB of Ram.
  I tried to install my new discovery, Ubuntu 7.10 on it. Of course, I did :)

  However I have the problem that I can not understand me.
  My wifi adapter is not running. It is one of these atheros 5007eg.

  I tried to find a driver, but could not find one.
  Madwifi can't yet and ndiswrapper, well that's a little out of my League I guess.
  I tried different tutorials, but each of them has not worked for me.
  I got so far:

  When I give ndiswrapper driver installation command (I use a 32-bit Windows XP driver) he shouts the driver already installed.
  But when I try to see if it works I get the wrong message driver.

  Could someone please give me a good job tutorial on how to install the drivers for the wireless card?
  Please bare in mind I'm absolutely new about operating systems based on linux... so a tutorial that I could just simply copy and paste into my terminal would be a gift from the gods for me :)

  Please forgive me for my poor English because it is not my mother tongue.

  Kind regards

  Bottom

  Hi low

  As you know, Linux's official not taken in charge and you're on your own. If nobody here can offer you the solution, try to check the manufacturers support page or visit a few Linux forums. This WLAN card is not built in Toshiba laptops only and I hope on the Linux forums you have much better chance to get the right info on WLAN drivers and the WLAN functionality.

  Good luck!

• Satellite A100 PSAANE - need drivers for Windows 2003

  Hi all

  I try to search the Internet for satellite a100 PSAANE drivers for windows 2003 but I can not find...

  Can someone help me please!

  Hello

  You won't find these drivers anywhere
  Win 2003 uses Win XP as the basis
  This is why you must use the Win XP drivers!

  Visit the European driver of Toshiba page and choose the satellite A100 PSAANE
  http://EU.computers.Toshiba-Europe.com

  Then, you will get all the drivers for Win XP

  Good bye

• Satellite A100 PSAAN: need drivers Vista for Pioneer DVD - RW DVR-K17A

  Someone at - it a Vista driver for readers PIONEER DVD - RW DVR-K17A installed in my Satellite A100-PSAAN model? -Tosh or Pioneer want to know.

  Vista driver? Sorry, but Toshiba does not offer driver for optical disc drive. ODD uses the standard Microsoft driver. You have a problem with it?

• Satellite A100 (PSAANE) - BSOD if I install Windows XP

  I am the owner of the laptop listed in the title (* Toshiba Satellite A100 PSAANE). *
  Inittialy that the laptop was sold with Win Vista preinstaled as operated system.
  My intention is to install Win XP on this computer. I am an experienced user in installing XP on computers but not on the laptop, and this is the first time when I tried.

  I have a big problem:

  immediately after the restart on the bootable CD with XP SP1, I received the following message on a blue screen:

  + "A problem has been detected and Windows has shut down to prevent damage to your computer. +

  + If this is the first time you've seen this Stop error screen, restart your computer. If this screen appeears again, follow these steps: +.

  + Make sure you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer to update the driver. Try changing video cards. +

  + Check with your hardware vendor for updates to the bios. Disable the Bios memory options such as implementing caching or shading. If you need to use the Safe Mode to remove or disabled components, restart your computer, press F8 to select Advanced Startup Options, and then select Safe mode. +
  + Technical information +.
  + * STOP: 0X0000007E (0XC0000005, 0XF76450BF, 0XF7A91208, 0XF7A90F08) +.
  + * pci.sys - address F76450BF base at F763E000, DAteStamp 3b7d855c ' + '.

  You should know that I have the latest version of the bios update on this machine.
  WHAT CAN I DO? ANY HELP?

  Hello

  As far as I know the Satellite A100 is equipped with a SATA HDD and so you need the SATA drivers before installing Windows XP.

  It is a known issue and you will find hundreds of discussions here in the forum about this Yes, you can take a few minutes to use the forum search.

  On your laptop, you need the Storage Manager you can download from the Toshiba site. Then, you can create a new installation with nLite disk or you are using an external floppy drive. I think that this document could be useful for you:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  But don t forget the Windows XP disk must contain at least SP2!

  Welcome them

• Can see router WLAN with Satellite A100 - PSAANE Vista

  Hello

  I have a satellite A100 PSAANE running Vista Ultimate that has trouble finding WIFI (atheros wlan card). The router is a Siemens gigaset transmitting the WPA2-PSK / WPA - PSK with dynamic channel assignment. In the past, I was able to get a wireless connection to my router with this laptop, but did find it difficult to detect the WIFI network sometimes.

  Location:
  Active wireless switch. Different WLAN of the A100 see whenever I update the list in Vista.
  Ever - at least most of the time that I do not see my own network.

  Other laptops running Windows XP however found my WLAN in these moments there.
  This implies a malfunction on the A100.
  Update (28/10) drivers for Atheros and Vista resulted in no w-network at all.

  Reset did not help. A reset of the router does not work nor the laptop next to the router of positioning.
  The failure of detection is a recurring event with this router.

  Currently the situation is that no WLAN is detected, then things got worse.

  Everyone has the same problems in a similar configuration?
  I feel that I might have a problem of material here.

  Thank you very much

  I had a similar situation with my two laptops Toshiba (new Satellite A200 and older Tecra M1). I was confused why the WIFI network is not visible the two notebooks. After a few reboots (laptop computers and router) I again was able to use the WLAN.

  I do not really understand what was wrong, but now it works again. Try the same thing. Stop the router for awhile and turn it back on.

• Need two drivers of Windows XP Home for my Satellite A100 (PSAAN)

  Hi guys,.

  I am experiencing a small problem, I recently bought a second hand satellite A100 (laptop and charger only), that came preloaded with Vista home premium. the problem is that I need to run Windows XP on this machine.

  So I did what anyone else would do, I formatted the machine, but not knowing that the disk contained the necessary drivers. So now I have loaded WXP, installed all the drivers in the support section, but now I'm looking for two drivers:

  (1) the "biometric coprocessor" and
  (2) audio driver modem high definition...

  Any idea where I can get these?

  Thanks in advance

  Hello

  All the XP drivers are published on the page of Toshiba. But the proper installation order is the key!
  Please choose your laptop in the form driver of Toshiba (PSAAN) download and install all the drivers available in the right order.
  The installation instruction was also published on this site! Simply follow these guide lines!

  I think that the two missing pilots are chipset and modem driver!

• Need drivers XP for Satellite A100 PSAANE

  Why is there no drivers for Win XP, computer toshiba laptop, a series A100 PSAANE.

  There is one and only fair for HER.
  I have such a laptop, with vista preinstaled, and he works very hard.

  I am looking for drivers, I installed them, but I had some problems with them. I took the drivers of the other notebooks SERIES A100, the American site, but nothing.
  I need help here.

  Y at - it someoane coul help me?

  Hello

  Don t look at the Toshiba site us but on the European driver from Toshiba site.
  This laptop is really designed for the European market and therefore the drivers from the US site could not work as it should.

  Check the different Satellite A100 and Equium A100 series and drivers only.
  Unfortunately, this is my best idea and I fear that it could be a last :| m

• Satellite A100 PSAANE: need of Modem driver for Windows XP

  Hi all

  Please help me
  I have the XP operating system.
  I have not found the Driver Modem...

  Thank you...

  Hello

  I can't believe that! Have you checked the page European driver of Toshiba?
  I chose your laptop Satellite A100 PSANN series starting from the download form and I found the XP modem driver. Again, where is the problem? The XP modem driver is available for you.

  I think you should also take a look at the installation instructions document.
  You will find a driver the installation order that is important!

  Good luck

• Satellite A100-188: BIOS downgrade - how?

  Hello

  first sorry for my bad English.
  I have to update my bios from version 1.3 to 2.0. After that I have problems when I start the system.
  toshibe says it's not possible to downgrade. in this forum I read that it is possible.
  I read that in an Italian forum can I find help, but I Don t understand the Italian language.
  the user in this forum 'alter_schwede' and 'fizzban' can help me. (in German).

  When one of these 2 users read that please contact me. ICQ: 131260081
  or by e-mail [email protected]

  Hello

  First of all, to my knowledge the BIOS downgrade is not possible.
  Secondly, on the Toshiba page, I found only the latest BIOS (not the older versions).

  In addition, on the Toshiba driver page, you will find 3 different models of Satellite A100.
  AFAIK the A100-188 is a unit of PSAA9E.
  Therefore, it is important that you used good BIOS and that it have updated with the proper procedure.
  Bad BIOS and bad upgrade procedure may damage the motherboard or some problems with the functionality of the device.

  I guess you used the wrong BIOS. In this case, you will need to contact the ASP from Toshiba for the return of the BIOS.
  You might try updating again with the good BIOS.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• Satellite A100-192: after Vista installation HARD disk capacity has decreased

  I am a user of Satellite A100-192 with 120 GB hard drive. After I installed Vista Ultimate, I saw this total capacity of my hard drive completely passed to 92, 8 GB instead of 120 GB while it was XP.

  What can be the problem? How can I reach the other capabilities of my hard drive?

  Hello

  Vista needs and used 2 partitions. The second partition is not visible and it s necessary to Vista backup and restore functions.
  Maybe you have verified that the size of the first partition (C) and didn't note the size of the second partition.

  Concerning

• Satellite A100-692: after an error of installation of Windows XP Prof blue

  Hello

  I bought a new satellite A100-692 with Windows XP Home OEM as an operating system.
  But when I tried to access the internet using the local area network and a Proxy Server, it does not work.

  I tried everything I knew and even ask some Forums to get a response, but nothing help.
  Then I think it can work when I install Windows XP Prof instead of the OEM Version. Because all Clients in our network work fine with it.

  But when I run the Installer (booting from CD) I get a blue screen with the message that there is a problem with the PCI (pci.sys) driver (after loading all the drivers).

  Can someone tell what I need to do so that I can install another OS?

  Thank you

  PS: Excuse me if my English is not very good ;)

  Hello

  First of all, the blue screen error message may appear due to hardware failure or serious malfunction of software.
  In your case I guess that it s a software issue because on the version OEM pre-installed, everything worked properly.

  In addition I checked the site s driver and it seems that there are drivers for 3 different notebooks to A100. In this case, you should be sure that you use the correct drivers.
  As far as I checked this laptop your A100-692 has PSAA9E number.

  But have you created a CD of drivers & tools before formatting the HARD drive? This option you will find in the assistance of Toshiba.

  However, you can download the drivers from the Toshiba site and here it is very important that these drivers will be installed in the right order!
  The chipset utility must be installed in a first time after all installations of service packs.
  The common modules are also important.

• Satellite A100 stops after upgrade memory

  Consider me the thickie Pack 1... Not sure wot im talkin end but n e way...
  Have a Satellite A100 570 (PSAA2E)...

  Tried several websites online lookin for memory upgrade. Did not have the witt to use the toshiba site... Eventually get to the point...
  Ran the Diagnostics on laptop and sent module one needed.or so I thought... wrong 1 or 1 s I bought 2 x 1 G modules in order to 'double '...

  Got my money because they were not compatible with my system... something to do with the problems of density...
  Tried company called OFFTEK... they seemed to know what they were talkin' about... I'm Offtek. at present one...

  200-pin 1.8V SoDimm PC2 - 4200 DDR2... but Toshiba recommended below...

  1 GB memory DDR2 PC2-4300 (533 MHz)
  Part number: PA3411U-2M1G
  1024 MB (1 GB) memory PC2 - 4300 DDR2 (533 MHz)

  Theres an obvious difference... 4200 and 4300. But I'm not sure if there is a significant difference... or what it means
  Update the bios to the version latest and basically put all that toshiba had to offer for this model...

  EVEREST ran and it recognizes the module 1 G but when I pull out the original 512 MB module, the laptop starts for about 3 seconds then stops...
  This repeats about 5 times then fill stop...

  I don't like open the back cover too often but it's the 3rd module...
  Don't know what is supposed to happen if the module works... IE launch message... dunno if windows recognizes module 1 G...
  Would be - this bet safer to send Offtek module and stick with option of toshiba...

  Thanks in advance...

  Hey Buddy

  Have a look here:
  Memory for Toshiba Satellite A100-570
  http://www.orcalogic.co.UK/ASP/ProdType.asp?ProdType=23658&ft=m&St=3

  You can use the DDR2 533 MHz (PC2-4200) 200 - PIN SODIMM bars!

  The pc2-4300 Rams are the same as PC2-4200. It s just a marketing gag PC2-4300 are PC2-4200 modules that can be overclocked by some versions of BIOS PC desktop

  However, you must take the PC2-4200.

• Satellite A100-289: after 5.1 Bios Update powerfault on usb device

  Hey, I have trouble after you install the Bios Version 5.1 on a Satellite A100-289.

  First: there is NO external USB device connected!
  After the awakening of the laptop Sleepmode , I received a message in Windows XP the a power fault has been detected on one of the USB devices. A dialog box opens and I can "reset" the device.

  This only happens after that the laptop is awake in sleepmode, perhaps to Hibernate, but not when the laptop starts. It seems that everything works well, but this post makes me nervous.

  Can someone tell me, what is going in this box?

  What about Mirko

  Hello

  5.1 BIOS was designed for Vista but it should (or it works) also with XP!

  However, you could try updating the BIOS with the other BIOS version that is operating system independent
  or / and you can try to disable the power save option for USB ports in Device Manager.