Satellite C55 - Has - after update BIOS fan turns faster

Similar Questions

• Satellite L655 (PSK1JE) - 100% after update BIOS fan speed

  Hello

  Yesterday, I do BIOS update since version 2.10 to 2.20. The update of configuration correctly but the problem is the fan, the speed is 100% all the time.

  others have this problem with this version of bios?

  Can I downgrade to the version of the bios?

  Thank you and waiting for your answers

  Hi kingofcopy,

  Load default settings after updating the BIOS? Go into the BIOS, press the F9 key to load the default values.

  Have you tested the behavior of fan with cooling optimized battery option? In Windows power management, you can define more low fan speed in power management to reduce the activity of the fan.

  Check this box!

• Satellite A210-199 - after updating BIOS only seeing yellow on

  Hi all, help is needed.

  After a BIOS updated with the help of Toshiba TEMPRO laptop Satellite A210-199 stopped working. The updated spent normally, but when it was turned off is more responsible. All this time the yellow indicator Burns power only. In a few minutes a laptop trying overloaded, but has no outside effect and so constantly.

  How is it possible to correct?

  Hello

  Well, it seems that the BIOS update has failed or something else. Maybe the ROM module must be reflashed by a technician of the laptop.

  But you can try this workaround first:
  Remove the battery and the AC adapter and wait an hour. Then reconnect both devices and try to start the laptop.

  If it doesn t work on the Toshiba site, you can search for nearest authorized maintainer:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

  Good luck!

• Satellite L300 - dead after update BIOS!

  Hello!
  I had a problem with Windows XP, so I decided to update the BIOS. After update, I got 3 lines of errors. After the reboot, nothing appears on the scree! I have toke off the power to the battery and the power cable for some time, I had taken only one cable, but still nothing! No beeps, some noise of hard/dvd disc on begging. Can someone advise?

  Thanks in advance!

  Thom

  Hey Buddy,

  It seems that the BIOS is damaged and it must be reflashed to an authorized service provider. This is a delicate procedure so these tools can t be downloaded and are only available for the FSA. On the Toshiba site, you can find a list of all FSA. Simply contact the closest in the country and ask for help. Guys will help you best possible
  However, this forum can help you:
  www.theeldergeek.com/forum/index.php?showtopic=21209

• Satellite L350D - crash after update BIOS?

  Hey all.

  Put windows XP on my Satellite L350D, worked well, has all the drivers etc. and works perfectly. Returned on the toshiba site and saw there is an update of the BIOS for it, then downloaded and says to install. To halfway through she turned off the laptop (thin power supply and had a full battery, so must have been updating).

  Now it will not boot up what so ever. The power light turns on but nothing else works.

  Im guessing that he wiped or corrupted BIOS, is there any fix for this, I can refer to toshiba or am I out of luck?

  Hello

  The failure of the Bios is one of the most painful problem in this forum. Too many discussions on the failure of the bios posted and typical response is to contact the ASP. Read this, may be useful for you

  http://www.theeldergeek.com/forum/index.php?showtopic=21209

• Satellite Pro 4270: after update BIOS CPU speed at 250 MHz

  Welcome.

  I have upgraded the BIOS to version 2.7 (downloaded on toshiba website) in Satellite Pro 4270 and after her, my bus speed decrease to 250 MHz, so now I have Celeron 250 MHz instead of 500 MHz. You have some suggestions? Where can I find the old version of the BIOS in v2.7?
  Thank you

  HI Artur,

  Unfortunately, it is not possible to download an older version of BIOS on yout laptop since the BIOS update procedure is written to test later versions pre-installed and not too write.

  You will need to take your laptop to a Service partner certified to have a previous version of the BIOS re-installed.

  Kind regards

• Satellite L300 - 26K - after update BIOS touchpad no longer works

  Hello

  as recommended by tempro, I have updated the BIOS to the version 2.1 to 2.2 (windows). After the reboot, incl. touchpad. doesn´t advice working. In the bios, touchpad is enabled in the system, it said unit works correctly. FN/F9 does no effect. Reinstall the synaptics - no effect - drivers still dead.

  Satellite L300 - 26K
  Using Vista 32-bit home

  How can I restore BIOS to 2.1 again? (if I try the V2.1 windows-bios utility he says that it is always installed - so I can't downgrade by this easy way)

  Please help - I need my laptop without external mouse (this works)

  your

  Oliver

  Post edited by: enigmo

  Hi enigmo,.

  I can t imagine this happening due to the update of the BIOS. Have you tried to reinstall Windows using the Toshiba Recovery disk?

  This BIOS downgrade is possible only to an authorized service. Technicians can install all versions because they have these special tools to do a downgrade.

  On the Toshiba site, you can find a list of them. Just give the guy and ask for it. They will help you! :)

• Satellite A500-13W - after update BIOS the FN buttons do not work

  Yesterday I updated my Bios of my laptop to 1.50. After that the FN buttons no longer works. Can someone help me? ^ ^

  Sorry for my bad English

  Hello

  You have installed the correct version of the BIOS of your laptop?

  Features of FN buttons are normally not depending on the version of the BIOS. So, you need Toshiba value added Package and utility tools to Support Flash Cards. Then I recommend to reinstall two of them.

  You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Remove all older versions first. Reboot then install VAP and finally Flash Cards Support utility.

• Satellite L300 (PSLB8E) - after update BIOS no longer start

  Hello..
  Please, help me to overcome this problem.

  I downloaded the latest BIOS for my Satellite L300 PSLB8E. The previous BIOS was 1.90 but I was facing some nework of error so I thought to upgrade the BIOS can help solve. I have download a new BIOS which is the exe 2.10, its installed successfully, and then shut down, but never started again. I tried to start it several times. I tried all the keys. I don't see a power led and two battery light.

  I don't know what to do now. I have a recovery disk but it also does not work. I'm stuck. II had built a bunch of emails to answer that I am lost now.

  Please help me someone.

  Hi dhaval2000in,

  Unfortunately, I think the case is clear: something was wrong because the BIOS update and now your laptop can start t more :(

  The Toshiba Recovery disk will not help you because it doesn't contain any BIOS programs it contains only an image of recovery of Windows with all the drivers and flashing tools.

  In my opinion, please contact an authorized service provider in your country to get rid of it because the guys do reflash ROM. module
  I m that you can clarify this issue with the technicians and then you can use your laptop again :)

• Password BIOS after update BIOS on Satellite A210-131

  I just bought this laptop and update its BIOS. After update done computer turns off automatically. Then I turn them on, it ask password, I've never given an any of them in the BIOS.
  What is the password?

  Hello Jhonson

  I don't know what the password is, but please call the service provider allowed in your country, and they will help you. They can remove the password and you can use your laptop model as before.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Satellite Pro A300 (PSAG9E) - after updating BIOS Windows will not start

  Restart went well after update BIOS and Windows XP logo appears loads for a few seconds then a beep and restart - last good known or start Windows normally same effect.
  Reboot back to start - this is a new laptop - using the BIOS of Toshiba s official download site.

  Quite annoyed to try to find a way to upgrade or downgrade the BIOS.
  Took battery and RAM to see if I can delete it?

  Any ideas anyone?

  I think you mean BIOS * update * and do not upgrade ;)
  An upgrade is not possible

  However, you can try to remove the battery and the AC adapter and wait an hour. After that, reconnect the battery and the AC adapter and try to start Windows.
  Moreover I would load the default settings in the BIOS before starting Windows.

  If it doesn't work, it seems that your ROM module needs to be reflashed. In this case an ASP can help you.

• Satellite C55 - Has - 1 L 0 does not start in Windows 8

  Hey guys.
  I hope you can help me a bit.
  I have a Toshiba Satellite C55 - has - 1 L 0 here and it does not start in Windows 8.

  I turn it on, the Toshiba start screen appears, and then I get a message on a black screen saying "media control" (failure) and after a little while "no boot device. Please restart.

  I checked the BiOS and it does not see the hard drive (said HARD drive - no) and even in the boot order list, I don't get a list with the DVD drive with the exact name, but for the HARD drive.
  I tried to do a recocery with the F12 key and get the list to choosw where I want to start but by selecting the disk hard does not work.

  So I thought I'd try a live distribution of linux to see where is my hard drive and back up my data (after some settings in the BIOS - boot CMS mode) but I can't find there too. (I have a file fstab and mtab, it would help if I posted it here?)
  Is my HARD drive broken? Can I try something else?

  Thank you very much!

  You are right. This issue should be fixed by the authorized service provider.
  Furthermore, why do some risk steps to check this problem, if the warranty is valid.
  Warranty will cover the repair costs.

  Addresses and phone numbers, you can find on http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

  Good luck.

• Pavilion g6-2215sia: CARD without WIRE NOT DETECTED AFTER UPDATE BIOS

  Recently I have updated my BIOS on my laptop HP Pavilion g6-2215sia think he'll adjust the hardware acceleration feature missing in my system (there is no option in my BIOS to enable virtualization technology). My BIOS version was F.12 and I've updated to F.24, but after update BIOS all my wireless functionality no longer works (including my wifi and bluetooth), and still there is no option to enable virtualization technology in my BIOS settings. On my Windows 8.1 x 64 Pro wifi and bluetooth options are grayed out so I can't turn them on or off. I tried to reinstall my bluetooth driver, but the software says that it doesn't detect any bluetooth hardware. Even when I restart and boot in all my Linux distributions installed on my system (Ubuntu, Quina and Kali Linux) and my x 86 Android, they still do not detect my wireless capability (says Ubuntu, "wifi is disabled by hardware switch").

  To confirm that this was not a software problem, I has conducted an audit of start-up and tested for my wireless module and got this result, "without WIRE MODULE CHECK: NOT INSTALLED". The only way I can get my Windows operating system to recognize my wireless (wifi and bluetooth) is now by doing a hard reset, when I unplug my laptop from the power supply, remove the battery and hold the power button for about 30 seconds. When I turn on my system, then I can turn my wifi/bluetooth on my Windows. But if I restart my system the problem comes back and I can't turn on my wireless. So basically, I have to avoid questioning my system off and only Hibernate, so that whenever I turn on my laptop I can use the wireless. If I restart my system so I have to repeat the hard reset in order to use my wifi/bluetooth, which can be very annoying.

  The problem is that I often use my other Linux disributions and I have to restart before starting in them so that my readers will be mounted read/write, and when I do my Linux can not detect my wireless and it's a serious pain for me because I need to use my wireless often for internet connection.

  Please I really need help on how to fix this and get my wireless working normally without having to do a hard reset every time. I tried to restore my BIOS F.12 unfounded but I don't have the image file (I extensively searched the Internet to find, but does not). I've even updated again to F.26 but I still have the same problem (my current version of BIOS is F.26).

  If you see no updates the BIOS in your list of drivers - where do you have the updates to the BIOS, you used?

  Try here - if you do not see the list of the BIOS, use the "Edit" button to change Windows 8.1 to Windows 8:

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-G6-2200-notebook-PC-series/5296082/model/5315061

• Startup after update BIOS problems

  I recently updated my Alienware Aurora R4 for Windows 10, that satisfies me, but I noticed that my fans have been reallt strong during startup and shutdown, and I had to reset manually in my Alienware Command Center application which caused irritation, so after minimal research, I saw that one of the proposed fixed has been update BIOS I foolishly thought would be a quick easy thing to try, so I updated the BIOS version A7 to A11 day because I was not aware of the flashing, which I realize now, I should certainly have done. In any case, the update seems to work fine, no freezes or crashes and I just restarted my computer and stop was normal. When he started upward again if, instead of start properly, he showed a 10 windows screen that says: "your computer encountered a problem and needs to restart" with an error that says INACCESSIBLE_BOOT_DEVICE. When it has rebooted, I went into my BIOS settings and that he made sure that my the first boot device has been "hard drive" (I have two discs SSD, a HARD drive, but they have never caused me problems before and nothing has been fixed when I took out the HARD drive without windows on it). So far, I restarted a bunch of times and tried everything I can think of. Any help would be appreciated! Thank you

  simple tips I gave to a member of the forum the other day (it is possible that the bios update is back your settings to "default"):

  • Check your bios, game sata AHCI controller
  • set the boot device as HDD #1
  • others had the chance in the bios, go to 'legacy boot.
  • remove all external usb devices for now accept keyboard and mouse back.

  Dell/Alienware advice says to disable secure boot...