Satellite C660D-153 of reconstruction after failure or bad HD Windows 7 is installed

Similar Questions

• Satellite C660D-153 - after system recovery bootmgr is missing

  I did a complete system restore on my satellite c660d-153 and he says now that the bootmgr is missing at startup. My laptop did not come with a boot disk, so I'm not sure on what to do. Help, please!

  All you can do right now is to try to do it once more.
  For more information, see http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

• Need the right charger for my Satellite C660D-153

  Hey,.

  Sorry to be a little ignorant but I need a replacement charger for my Satellite C660D-153. Just wondering if there was a good or bad to get?

  Thank you
  Sidler28

  The power adapter DC PA3714E-1AC3 19V 3. 42A would be compatible

• Satellite C660D 15F - black screen after startup

  Satellite C660D 15F

  Hi guys,.

  I have a big problem with my laptop. When I started to-go from sleep - two days ago I heard the computer starts normally but the screen remains black. No mater how many times I tried to restart, the screen shows nothing, no message no picture. The normal operation of the side light remains on but the keyboard lights stay offshore. I can hear the computer normally (the fan etc..).

  I tried to hit SHIFT F8 start buttom on the first night, and the image was on the first attempt when I started the machine and everything seemed normal again! The next few days, I got a black screen once more and the case never worked again, no matter how many times I tried.

  Can someone help me please get out of this mess? Has anyone had a similar problem? How do solve you?

  My machine is now exactly four years.

  Thank you very much for your ideas! I really need to access some files on there!

  Hello

  Disconnect the power and remove the battery. After doing this press the power for 30 seconds about and try to reset your machine. Leave it for a while and try to start with power current only.

• Satellite C660D (PSC1YE) black screen after BIOS update

  I tried to update my Bios on my Satellite C660D portable (psc1YE) last week (big mistake).

  Something went wrong during the update and now when I power on I just get a black screen (LEDS and fan).

  After reviewing, the conclusion is that I damaged the BIOS that must now be blind flashed.
  So I got the hand on a 512MB memory stick, formatted using FAT through windows XP and used Wincris to create a startup disk after you have added the file bios.rom (renamed Bios.wph) which I extracted the last update of the BIOS on the Toshiba site.

  My memory stick has three visible files on it, Phlash16.exe, bios.wph and minidos.
  I plug laptop with battery, DVD player and power disconnected to stick, and hold Fn + B re-connection cable cable, turn it on.

  The fan whirs at full speed, and the USB lights up and flashes then for a minute, as if being read. No matter how long I let on, the fan will continue whirring and the USB is on and when I unplug and put in still works a black screen.

  I tried different sticks, (up to 4 GB with FAT32 format), programs of different startup (for example, the HP utility) drive but still no luck.

  Can someone tell me what I do wrong? I tried to look for a newer version of Phlash16 just in case that was the problem, but can not find one any where (mine is version 2008)

  All advice would be greatly appreciated even if it's just to tell me that I'm wasting my time because the pc is not repairable.

  I can't tell you if you waste your time or not because I n know if the motherboard ROM module is OK or not

  In most cases, it should be possible to reflash the ROM module using the BIOS crisis disk but this disc is available to authorized Toshiba service technicians and as much as I know reflash this methods is not always the same

  However, in some cases it might be possible that the mobo could not be fixed by disk crisis, it would be the worst case

  I recommend you to contact a certified maintainer Toshiba to check guys would be able to use the crisis disk and could test whether its possible to reflash the module ROM
  Is it not would be not possible well in this case you would need new motherboard :(
  But lets hope do ' t you need...

• Satellite C660D-1F2 - black screen after BIOS update

  Hello

  I have download the Bios Toshiba by writing my serial number for my laptop.
  First I checked my current bios and it is 1.5 I think. The news was 1.60. I flashed on WIN 7 64 bit
  First he checked, he erased and then he wrote after the writing process, the laptop is a reboot automatically. But after that the laptop closed and propelled again, he stuck to a blank black screen. Fan, CD Rom, keyboard worked. I think too many USB because when I connect my phone to the laptop, my phones battery charge. Please I need help. I am out of warranty.

  What I've tried so far:
  Take out the battery
  Power cable plug out
  Hold down the power button / stop 1 minute
  Connect the power cable to rear
  Press the Power button
  Solution: Same; Black white screen

  Satellite C660D-1F2 (PCS1YE)

  Hello

  I'm afraid that something goes wrong with the update of the BIOS, and now BIOS is damn Mr. usually in this case you need professional help from Toshiba service but it can be quite expensive.

  On this forum, you can find many discussions where people have described the same problem. Some of them have been able to solve this problem. a very interesting thread, you can find here. Check it out please.

• Satellite C660D - screen is black after BIOS update

  Hello!

  I need your help to solve the problem that I have...

  I have Satellite C660D - 1 3, I was upgrading bios up-to-date and poster ON but black screen, ventolidor work and open and close leitor dvd...

  no idea what problem? And how to solve?

  I'm waiting for.

  Thank you.

  André Pedro.

  I'm afraid that the BIOS is doomed and the BIOS update was not successfully. It is not easy to fix.
  On this forum I found similar thread, then you can read and perhaps solve the problem.
  Check it out.

  https://Forum.Toshiba.EU/showthread.php?54395&TSTART=0

• Re: Satellite U300 - 153 (PSU30E) - updated after the BIOS, I can't install Vista

  I recently installed an update of the BIOS for the U300-153 from the Web from Toshiba website.
  Has been running Vista Ultimate at the time.

  From that moment I could not access my hard drive. Restart the BIOS upgrade, it would hang on to the Vista loading screen. I tried to reinstall Vista Ultimate, but it always freezes at the point "finish installation". Have not tried to install other operationg system.

  Help, please!

  Hello!

  Weird, but in my opinion, it looks like to what you have tried to install an incorrect BIOS for your laptop.
  Are you really sure that you have downloaded the BIOS for Satellite U300 PSU30E?

  In addition, I would try to load the default settings in the BIOS. Check it!

  Are you trying to reinstall Vista using Toshiba recovery disc or disc of Microsoft?

  Good bye

• Satellite C660D-153 - replacement of the GPU

  I think I need to replace the video card on my laptop but thought I would check with you if there are other solutions. A few days ago, I was working on a document when an internal click under the keyboard led to a split screen and test color lines appearing on the monitor. Only led restart it happen again after the start-up phase.

  The screen now shows what looks like a staircase in the middle of the screen with imagesrushing tear down one side and static vertical coloured lines on the other.

  Any ideas, suggestions welcome.

  Replacement of the GPU is not possible.
  If the GPU is dead, the motherboard with the GPU must be replaced.

• Satellite C660D-153 - HD Fried - Options for replacement

  I had a series of C for a little more than a year and a half now and have recently experienced freezing, blue screen and crashing issues. After a reboot, my computer would not recognize my HD for about 30 minutes and then will work very well. Now, it broke down again, windows starts not at all and I can't find a work around.

  It will not start and more safe, or allow me to "repair my computer" using the advanced boot. I tried booting from a disc of windows 7, but which results, like the others, with a black screen and a cursor and absolutely nothing else, not the guests of menu or anything like that.

  First of all can anyone think of a way to solve this problem, and second, if I need to get a new HD that probably research, how can I get it ready to use and begin to rebuild the rest of my life? (I have a Windows 7 Professional disc already)

  Before you begin to discuss your question just a point: is guaranteed still valid and may be possible to get the new HARD drive in the case of the warranty?

• Satellite Z930 - no more Bluetooth after upgrade to 8.1 Windows

  Hello

  After upgrade to Windows 8.1 of the Windows store, I discovered that my Bluetooth printer
  has disappeared. Looking at the wireless settings, no more option to turn on/off Bluetooth.
  How can I return my Bluetooth?

  If you updated the system of Windows 8 Windows 8.1 you must update the drivers too!

  You will find on the page of the Toshiba UE Windows Update 8.1 driver drivers
  There is also a statement of installation containing the installation order.

  1 Intel Wireless display uninstall
  2 uninstall Intel Proset
  3 Realtek Audio Driver uninstall
  Day 4 windows 8.1
  5 TOSHIBA Assist Desktop Upgrade
  6 Intel Display Driver upgrade
  AMD 7 Display Driver upgrade
  8 Intel Rapid Storage Technology driver upgrade
  Update driver Audio Realtek 9
  Update 10 ALPS Pointing Device Driver
  Upgrade of 11 Synaptics Touch Pad Driver
  12 Atheros Wireless LAN Driver upgrade
  13 Intel PROSet/Wireless WiMAX software update
  14 Ericsson 3 G driver upgrade
  TOSHIBA 15 system upgrade driver
  Upgrade of 16 TOSHIBA Service Station
  TOSHIBA 17 function key upgrade
  18 TOSHIBA eco Utility v2 upgrade
  19 TOSHIBA Fingerprint Utility upgrade
  TFPU 20 WBF deleting fingerprints tool upgrade
  21 TOSHIBA PC Health Monitor Upgrade
  22 TOSHIBA VIDEO PLAYER Upgrade
  23 CyberLink MediaShow 6 to upgrade TOSHIBA
  24 TOSHIBA Media Player by TrueLink + Upgrade sMedio
  25 TOSHIBA resolution + plug-in for Windows Media Player upgrade
  26 TOSHIBA HDD Protection upgrade

• SP2 is unable to download after failure of computer with windows vista home premium

  My computer crashed and I restarted after the DELL factory settings is a Windows Vista Home Premium but I can't seem to download the SP2 so that I can get IE9. I have SP1, but when I try to download the SP2 it tells me to get SP1.

  Please do not mark a reply as the answer unless it responds to your question.

  It is what is in my previous answer to check what level of Service Pack you have installed.

  «Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64 bit installed.»

  It will also tell you which SP you have installed. »

  What does it there?

• Satellite L350-262 touchpad stopped after the latest updates of windows

  Hi all

  Last Friday, when closing close to 11 updates have been applied to Windows 7 (32 bit). When I got to the top of the laptop this morning the touchpad has stopped working and I had to plug in an external mouse.

  So far I tried to download the driver from the site of Toshiba, uninstalling the driver, reboot and then reinstall the driver and it did not work.

  Not yet opted for a restoration of the system, before I try that someone else had this problem?

  Any ideas on how to cure?

  Thank you

  Are you sure it is not disabled?
  Check the FN + F9 key combination

• Satellite C660D - Boot problems

  I had my Tosh for over a year now, so out of warranty, but should still work. Sometimes at the present time, the comp will freeze completely, which ensures a restart, but on re-booting, I get the familiar if please insert disc to start or select drive, the pxe rom error, check for errors of cables (something like that I don't remember the exact wording).

  After I left the computer off for the night, these problems seem to set and the computer starts normally. I first thought it would be a mistake to HD but which seems to work very well when it starts properly.

  Any suggestions as to what could be causing this?

  EDIT - this is a Satellite C660D-153 - 4 GB memory & hard drive 640 GB

  Post edited by: breakingzero

  Post edited by: breakingzero

  > I get the familiar please insert disc to start or select drive, the pxe rom error, check cables errors

  The PXE error message appears because the laptop is trying to boot from LAN.
  Why the laptop switches to LAN automatically?

  In most cases, the laptop can not find the bootable HARD disk system and this means that the HARD drive is malfunctioning it would also be an explanation for the issue of the gel

• Get the error message - Installation Failure Windows Installer not installed correctly when trying to install iTunes

  Original title: Error Message: microsoft windows install not installed correctly

  I'm running on Windows Vista 64-bit.  When you try to download iTunes for my iPad2 (now!) I get an error message when you have almost finished, saying "failure of the Installation Windows Installer not installed correctly.  I've looked everywhere for help.  Tried the auto-fixit... nothing.  Cannot find on my computer to try to do a uninstall, re - install Windows Installer.  (not quite tech-y to see if this is possible or if it would even help.  Please Please someone share their expertise?  Thank you very much, C.

  Hello

  For telephone assistance from Dell, you can consult the site mentioned below:

  http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en.

  For more support options affect the site mentioned below: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&l=en&s=dhs& ~ ck = nohold'a.