Satellite L500 - boot PXE ROM message

Similar Questions

• Satellite Pro 4600: PXE error message

  I got a laptop that is not working. I'm trying to re - install XP Pro.
  I changed the boot on cd first order, but it only works intermittently and jumps a lot of files.
  At the moment I have an error message;
  "PXE - E61 media test failure, cable test"
  "Intel DXE ROM PXE - MOF smoothly"

  Followed;
  "Windows was not start because the following file is missing or damaged:
  "root\system32\hal.dll windows".
  "Please re - install a copy of the above file.

  It is one of the many files that have been ignored the last time that the dvd player was working.
  It's a full XP Pro cd.

  Can anyone please tell me if it's the hard drive or dvd player that is at fault, or could the problem lie elsewhere?

  Hello

  The PXE error message usually if the laptop tries to boot from LAN.
  I put t know how you changed the boot order, but the LAN option must be set at the end of the boot order.

  I guess that the following error messages occur because of this setting.
  I recommend you this possibility.

  Good bye

• Satellite L500 - 'Boot from a hard disk BBS' shown at startup

  I have a Satellite L500, when to start it comes up with 'boot from a hard drive BBS' and that's where he stays. I tried to change the sequence of boot and startup speed.

  Could this be related material or the recovery disc won't work?
  Any ideas I can try?

  The value of the default BIOS and try again.

  By the way: since when you noticed this message?
  Did you change that may be responsible for this?

• Satellite A200 starts - PXE error message

  Hello

  I have a Sat A200 woo.
  The problem started when my phone froze when I download something and I turned it off using the power button.
  But now when I turn it on it comes up with this execution environment (pxe) boot before and continues to say that the media are missing and check the cable?

  Can someone tell me how to fix it

  Thank you

  Hello

  You mean this message?

  + PXE - E61: Media test failure, check cable.
  + PXE - M0F: exit Intel Boot Agent. +

  This means that the operating system is not found possibly the HARD drive is dead, or the operating system has not been installed correctly.

  I recommend to check first if the HARD drive is seen in the BIOS. If it isn't then you should replace the HARD drive and should reinstall the operating system.

• Satellite L500 - error F3-F100-0004

  Hi, my Satellite L500 displays this error message F3-F100-0004.
  Can anyone help on this?
  Any help much appreciated. Thank you.

  Hey,.

  When you receive this error message?

  Can you post a screenshot?

• Satellite C650 - message from the PXE ROM at startup

  My 6 month old Satellite C650 (Windows 7 64-bit) started grippements this afternoon and now will not restart. She gave the following message is displayed after the Toshiba screen:

  PXE - MOF: EXIT INTEL PXE ROM
  NO BOOT DEVICE

  I think that there is a "insert the disk and press a key" after that, but I'm away from home and have not all disks (not sure if there are home either!). So I tried a few off/ons and now does not go as far as the Toshiba screen.

  At a loss - nightmare!

  Obviously HDD is not recognized correctly, but the question is why.
  It's new model of laptop, and you should contact Toshiba service as soon as possible.

  Addresses and phone numbers, you will find under http://eu.computers.toshiba-europe.com > support & downloads > find an ASP.

• Satellite C650-17Z - only PXE error message no boot device

  Hi people I was wondering if anyone of you kind people out there could help me. I have a Satellite C650-17Z model and when turn on is the message I get:

  + Intel UNDI, PXE - 2.0 (builkd 083) +.
  + Copyright (C) 1977-2000: Intel Corporation.

  + For Atheros PCIE Ethernet Controller v2.0.1.9(12/15/09) +.

  + Check the cable connection! +
  + PXE - MOF: exit Intel PXE ROM. +.
  + No boot device - insert boot disk and press any key.

  Can anyone any sense of the message above?

  Hey Buddy,

  This error message means that an incorrect boot order is set and the computer tries to start between LAN port to the internal HARD disk space. It should therefore go into BIOS setup and change the boot order. Put the HARD drive as the first boot device internal.

  Take a look at this article from Toshiba:
  [PXE error message appears during the clean boot procedure | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=8]

• Satellite L655D-s5050: PXE - MOF: exit Intel PXE ROM. No boot device

  Hello

  I have a laptop Satellite L655D-s5050 running windows.
  When I put the power, instead of get a toshiba logo, I get a black screen with the command prompt and a few seconds later the following messages:

  Intel UNDI, PXE - 2.0 (build 083)
  Copyright (C) 1997-2000 Intel Corporation

  For Atheros PCIE Ethernet Controller v2.0.1.9 (15/12/09)

  Check the connection of the cable!
  PXE - MOF: Exit Intel PXE ROM.
  No boot device - insert boot disk and press any key.

  When I insert a bootable Windows 7 DVD, the installation process runs very slowly and never ends...

  How can I fixed this problem, if you have an idea, please share it with me.

  Thank you

  Hello

  Message PXE is a typical sign of a malfunction of the HARD drive.
  Why? Because the laptop is trying to boot from LAN.
  Why LAN?
  Because other bootable devices have not been found.

  I would recommend so check the first page of the BIOS. If the HARD drive is not listed, this means that the HARD drive is faulty and should be replaced.

• Satellite A110 starts with error message "PXE".

  I saw something on the internet that I usually look on the web address www.datemule.com I think, and I think without doing something new my laptop started to reboot and then pops up this message:

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  INTEL UNDI, PXE - 2.1 (build 082)
  Copyright (C) 1997-2000 Intel Corporation

  For Realtek RTL8100E/8101E Fast Ethernet Network Adapter v1.02 (060510)
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  what it means? Please help me to solve it!
  I look forward to your reply! Thank you!

  At first, I must say it's really strange that something like this happens so suddenly. It seems that your laptop can not find the HARD drive as a boot device.

  Start please your laptop, then press F2 to enter the BIOS settings. Check it please on the first page if the HARD drive is recognized and registered correctly. If Yes check it please boot option in the BIOS and don't forget HARD drive is set as the first boot device.

  Please post some info on the status of the BIOS and the HARD drive.

• Satellite Pro L10: PXE - E61 - Media test failure check cable error message

  I recently bought a laptop L10 without the hard drive, and whenever I try to start it with a hard disk newly installed, I get this message.
  PXE - E61: MEDIA TEST FAILURE CHECK CABLE
  PXE - MOF: EXIT PXE ROM
  OPERATING SYSTEM NOT FOUND.

  Someone can MAKE SENSE of IT AND ME the EXPLAIN, AND ALSO HOW can I GET the RECOVERY SOFTWARE I don't HAVE THE TOSHIBA RECOVERY CD BUT I don't HAVE THE CoA STICKER ON the laptop.

  IM DESPERATE PLESE HELP

  Hi Nash

  The PXE error occurs because the laptop tries to start first from the local network.
  You must enter the BIOS and change the order on HARD disk or a CD. I recommend that you set the LAN option at the end of the boot order.

  The recovery CD you can buy form the Toshiba service partner in your country.
  The number on the sticker is only an OEM key. You can not use it with a Windows operating system several.

• Message: "Realtek PC1e FE family controller series v1.24 (07/10/10) PXE - E61: Media Test failure." "Check cable PXE - M0F: PXE ROM of output.

  My laptop screen has the following message: "Realtek PC1e FE family controller series v1.24 (07/10/10) PXE - E61: Media Test failure." "Check cable PXE - M0F: PXE ROM of output. The single cable is the power cable but I can't get past this screen, what can I do about it?

  Moved from the community involvement Center

  Original title: mobile phone number

  Hello

  There are normally 3 possible reasons of this error you have.

  1. the BIOS boot order set to Network Boot: BIOS settings to check the boot order.

  2. check the cable connections between the motherboard and the hard disk.

  3. doesn't have a hard drive.

  _________________________________________

  You can check the hard drive.

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  See you soon.

• Satellite L500: WARNING: problem with cooling system message

  Dear Toshiba

  Some may perhaps explain to me how that happens.

  We have 2 x L500 computers laptops, one was bought and activated a day of July 2010 (Computer1)
  The other was purchased 1 day later the same store and activated the same day - 1 day later (machine 2)

  Yesterday machine 1 responded with the warning message, there is a problem with the cooling system - please turn the machine off and return it for service.

  Machine 2 responded today with the exact same message, just after turning on after 4 hours OFF... an unusual situation say you or are - this sort of built in: service to generate the functionality?
  I'm not convinced it's a stroke of luck and there is nothing wrong with a machine that I could see.

  Anyway to reset every machine has solved the problem, see how long it takes to return.
  As you may have guessed, two machines are out of warranty by a few months now.

  If any of you have a similar problem, would be happy to hear from you.

  Kind regards

  Ernie

  Hello

  One of my friends had the Satellite L500. As far as I know the laptop works pretty well.

  I do not know if this message was created because of a software problem, but the laptop should automatically stops down if the cooling modules would not work properly and the temperature would goes up to a higher level of m

  So I recommend watching the temp for the next time level and of course, you could get in touch with a Toshiba ASP in your country if notice plu temp or a hardware problem with the module cooling

• Satellite L500-131 - it can boot from eSATA?

  Hello

  I want to buy a Toshiba Satellite L500-131, but first I want to know information about the BIOS of the L500.

  In the BIOS you have a choice to boot on the eSATA/player device?

  Thank you for your answer

  Excuse me for my bad English

  Nice day

  I'm not 100% sure but I think that you cannot boot from the external HARD drive.
  Before buy you, you can also talk with your local dealer about this.

• Satellite L500-1XL - does boot and the screen stays black

  Hello

  I have a Satellite L500-1XL, when I turn it on the fan and lights and the hard drive light blinks several times then nothing, he's not going to the Toshiba screen remains black screen, tried ext monitor but still nothing.

  The fan always runs very quietly and the hard drive is running in, I put the hard drive in an another L500 and it is very good and can be accessed without problem, it has only 1 stick of 2 GB of RAM DDR3 and the other L500 I is DDR2 so I can't try to change the RAM. If I remove the ram should it beep or does only desktop computers do this? Mine does nothing when it is removed.

  Any help would be very useful, thank you!

  Hi gazzdowzell,

  If your laptop doesn t boot it seems to be a hardware bad working it could be everything, motherboard, BIOS, CPU, etc and it is difficult to say what exactly is the problem.

  First of all, I would like to try this:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

  If it doesn t work, please contact a service provider authorized in your country. If your laptop is under warranty, repairs are free.
  In addition if you remove the RAM and the beep of t n for laptop, it seems to be another problem. If you have removed the RAM module would be defective, the computer would have a beep.

  Good luck!

• Satellite L300D boot up with error message

  Hey!
  Then when I start my laptop, it is said;

  The other day the screen empties and restarted with the following eror is
  PXE - E61: Media test failure, check cable of
  PXE MOF: outgoing PXE ROM no boot device, please insert the boot disk and press any key

  and then he mentions something about a realtek ethernet controller.

  I know that laptops trying to boot from a network or a local network, so ive changed these options in the boot menu, but any order is the start menu, it will always try and boot from a network or on the LAN.

  So I disabled the network and local network settings in the bios, restarted the laptop, and then he said something as the media not found, insert the floppy disk and press a key. So I tried to put the toshiba recovery disc in, it gets so far and then it says theres no disc present.

  Before ask you, the drive IS DETECTED in the bios. So it is recognized it...

  I'm all out of options now so I need help. is the drive broken? or what's the story?

  Thanks in advance!

  Hello

  Yes, perhaps the HARD drive is broken because the laptop attempts to boot from LAN.
  It seems that the BIOS can not find else device startup.

  I think you need to replace the HARD drive and should install Windows system once more.

  Good luck