Satellite P100 - Win XP PRO - unable to connect to normal - WLAN card

Similar Questions

• Satellite Pro P300 - 20 h: unable to connect to the WLan card and LAN disappeared

  Hi guys!

  I had my computer a little more than 6 months and suddenly came up with 2 problems!

  First the LAN adapter seems to have deleted the drivers it is, in itself, and apparintly to remove the entire map in general.
  I don't know how this can happen, because the computer was untouched for 3 months that I've been away!

  Secondly the packed wireless, the wireless says he works on the Device Manager, but when I try to connect or never discover the networks, it will not let me connect and tells me that he cannot see the networks! When my brothers computer he can find same networks!

  It is really strange and annoying reallllyyy!

  Thanks in advance.

  Carl.

  Are updated Microsoft on automatic installation?

  Try reinstalling the drivers LAN and WLAN.
  Driver WLAN, you can find the Toshiba WLAN Portal under http://aps2.toshiba-tro.de/wlan/
  Maybe your brother is right settings WLAN. compare the settings with his computer and make sure you use the correct password if the WiFi network is protected.

• My ZTE open C unable to connect to the wlan with 63-signs-hex key.

  Hello

  my C open from ZTE unable to connect to the wlan with WPA2-PSK and a 63 sign hex key. When I create a 2. ESSID with WPA2-PSK a sentence normal, everything's fine.

  Oliver

  Hi OliverwithZTE,

  I understand that you have connection problems to your network WPA2-PSK.

  Unfortunately, WPA2-PSK is currently not supported on Firefox OS version 1.3. Only WPA-TKIP and WPA2-AES are supported.

  -Ralph

• Satellite A500 - 03P: unable to connect to the WLan using Win 7 + event message

  Hi all

  I recently bought the Satellite A500 with the offer included Windows7 while he was available late October 09.

  So I had the Toshibe DVD for the upgrade and followed the steps and Visa home premium upgrade to Windows 7. Now I have two questions.

  (1) I get a system event Notification after start, talk to me about the system event log. The full message is below.

  Unable to connect to a windows service
  Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service failed

  (2) I was able to use this laptop for the internet before the upgrade, both via a USB wireless drive as well to the office via a DSL modem.
  Now I can't access the internet after the upgarde of Windows 7!

  For example the Optus dial-up box pop up appears commandeLorsque I click on 'connect', it does not connect.

  Can anyone help please?

  Thank you
  C I

  Hey Buddy,

  (1) did you check the Configuration of the Service for this service? The Boot System Event Notification Service type must always be set to automatic. This service is absolutely necessary for Windows and shouldn't t be disabled or set to manual startup type.
  Check it!

  (2) to be honest I never heard on the internet BEFORE, but normally, it should also be possible to access the Internet with Windows 7.
  Make sure that the WLAN or LAN card is installed properly and check the TCP/IP settings. If you are missing some driver you can get on the page of Toshiba.

• Satellite Pro 6100 - unable to connect to the WLAN router

  Hello

  I brought a 2nd hand Satellite Pro, model version SP6100 (PS610E-029ZV-EN), P4 1.7 Ghz, 512 MB, 30 GB, with Windows 2000 Pro loaded.

  I can't connect to my wireless router. The switch is in the correct position.

  I want to change to XP using the key provided with the new laptop (dual OS) however I can't reformat using a XP disc at the start up or if I use the recovery cd (start with holding C and let go when he works up) it starts but displays 'specification drive not valid' three times and charges Win2000.

  Can someone advise how (or if!) Can I reformat I want?

  Any help will be greatly appreciated.
  See you soon.

  Are you sure that the wireless network adapter has been installed in the laptop?
  Check in Device Manager

  On some series WLan is optional. This means that the WLan card is not installed, but it is possible to install an and, consequently, the laptop contains the WLan switch.

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Win 7 Pro 64 bit configuration network, cannot access card reader when im not connected network

  IM under Win 7 Pro 64 bit on my laptop, im am Setup on an Exchange to my office network. The laptop has an SD card reader, and since I use CF cards I have a USB card reader also (my old card reader has been pre Win 7, so in desperation, this last weekend, I bought a new Targus card reader that preload drivers and is Win 7 compatible.

  The question is when im not connected to my office network and I put an SD card in the embedded player, or use the USB drive (the old drive did the same thing if it is not a drive issue) the computer laptop reconizes the event by sound in my computer scans the URL bar, and the card will not appear in the my computer window. So im hooked on my network it readings, launches autoplay and wonder what to do (as I have it setup to do).

  I always perform software updates and just checked my Windows is up-to-date.

  Any ideas as to what is happening and how to fix?

  Thank you

  Hello

  I suggest you to send your request to the below thread to get assistance on this issue.

  http://social.technet.Microsoft.com/forums/en-CA/categories/

  It may be useful

• Unable to connect to the WLAN router satellite P300

  Hello everyone,

  I hope you can help me with my problem.

  I bought a Satellite P300. Now, I'll have some connection problems to my fritzboxfonwlan over a wlan network.

  When I connect my laptop via a cable, all right. Only with wlan i´m problems.
  My router ssid is displayed correctly. I can also type the key. But then the router is not to be found.

  I use as wpa2 encryption.
  I think that Vista has problems with it. Vista has also the most recent updates and my wireless (intel agn5100) card.
  I tried all the three drivers on the side of toshiba. I Don t know what I can do next.

  If you have any ideas, I'll be happy to hear it.

  Hello

  Have you checked if the address Mac filtering settings can affect the WLan functionality?
  If the MAC address filtering enabled your WLan card mac address has been inserted, then your laptop wouldn't connect.

  Also I recommend you check the settings of the WLan card TCP/IP.
  In the TCP/IP properties, you must set options for automatically

  PS: have you checked whether your P300 is the latest BIOS?

• Satellite L300-1 a 6 - unable to connect to the internet

  I have a problem - unable to connect to the Internet.

  First of all, I try to use internet DSL from phone, there was no result.

  Then I try to use digital TV internet - no result.

  Laptop does not detect a network, it says - undefined network.

  My firewall is active, now I use a modem to laptop...

  Sorry, but I don't understand how you have configured your DSL router/modem.

  First of all, you need to configure the router and need to insert all the data from your ISP (Internet service provider).
  Usually the model or DSL with router assigns the IP address. Therefore, only connect your LAN cable to the LAN books and you should get a connection to the DSL router/modem.

  I think that in most cases the whole process is described in the manual of the router

• Satellite L350 - unable to connect via a WLAN

  Hello
  New to this lark of thread

  You just bought a L350
  I have managed to connect to the Internet via a cable, but am unable to connect via wifi.
  WiFi is turned on. He finds my BT Home Hub but when I connect, it just says: it's impossible.

  Help, please

  Have you checked the Wifi device in Device Manager? The driver is properly installed?

  Try turning off your firewall, which could block the Wifi connection.

  Also try to press Fn + F9 to toggle wireless devices

• Satellite L505-12 q - unable to connect to the Wlan on Draft N Router

  Hello.

  I have a Toshiba Satellite L505-12 q who that I connect to router Edimax br 6524n.

  My problem is that when I connect to the router the laptop does not use n 802.11 g... The network card is Realtek RTL 8191se... He supports the project and it is configured to receive B G and N. When I set up the router to use only the band N the portable project sees the network, but when I try to conect it can not...

  Can someone tell me where is the problem?
  I updated the firmware on the router and adapter driver and still nothing good... :|

  Thank you.

  Post edited by: Matt1990

  Hello

  First you need to update the WLan driver.
  Here is a page with all the drivers:
  http://APS2.toshiba-tro.de/WLAN/

  After that, go to Device Manager-> properties-> Advanced tab WLan card and check if the Draft N has been selected.

  Restart the device and then try again

• Satellite L300-217 - unable to connect to the WLAN

  I can see the SKY network, I am trying to connect to (5 bars). _I can't connect_ (despite having the network encryption key). The error message is 'user timed out' (he thinks little about when I press on connect)

  I have a connection of network wireless WPA Old Virgin that I can't remove. I hit delete and he disappears for a few seconds then comes back. SKY seem to think that this is the problem

  I have updated the Atheros wireless network cards so my Realtek

  Any suggestions? Thank you

  Hello

  What is SKY network? Is this normal router WLAN you have at home or what it is exactly?
  This network is probably blocking the new MAC addresses. If the MAC address of your wireless network card must be allowed on this router.

  I put t think the problem is your old WLAN connection. This doesn t affect other connections

  > have updated the Atheros wireless network cards so my Realtek
  What WLAN card you have exactly?
  You need a single driver because that one wireless network card is installed.

• Satellite A110-195 unable to connect to the WLan router

  Hello

  I have a wifi router and I have connected my laptop and it worked wery well but on low there is I could not conect to router but woudn't ip address pop up. Internet access was not.
  I am connected to the same router another device and it worked...

  Hello

  Believe me, there is no general solution, you must check all the settings of your operating system

  First of all that I recommend to check the parameters of the TCP/IP protocol if everything is settled automatically on.
  Then check if you are using encryption parameters right as standard (WEP, WPA, WPA2) encryption and the encryption key.

  It s also advised to reinstall or update the Wlan card driver

  If you used the windows own WLan configuration, I would recommend testing as Atheros Client utility or Intel ProSet Wlan client configuration utility. But it depends on the WLan card what client WLan configuration utility can be used

  concerning

• 5901tw flow 8: [Please help] unable to connect to 4G network card, driver missing HUAWEI Mobile Broadband Module

  Hi all

  I just bought 8 streams HP 5901tw 4 days ago, yesterday, after internet connection using my card of 4G (WWAN driver) in my Tablet 8 Stream, suddenly the internet connection dropped and I lost my 4 G network card. I don't know why it happens by itself. But for connection Wifi still works well and wifi interface is always detected in network adapter but 4G is missing from the list.

  In Device Manager I see list of pilot missing in other devices-> HUAWEI Broadband Driver Module is missing from my Windows with Bing 32 bit OS 8.1. I try to find the driver through windows update, website of hp or other sources, but is not found. I also tried to update the BIOS firmware to the latest version and upgrade of such software firmware driver LAN, etc. from the HP Web site, but still can not fix missing pilot of the HUAWEI Module of high speed.

  I also try reboot several times, making recovery, but still having lack of driver for HUAWEI ADSL Module.

  Last effort, I try to current level Windows 8.1 to Windows 10, but still no conclusion success lack driver HUAWEI or fixing my 4G network missing question.

  Now I can still connect to the internet with my 4 G card more every trip.

  Someone there solution and how is address/where to download those missing 4 G network driver (HUAWEI ADSL Module) 8.1 for Windows or Windows 10 HP 5901tw 8 streaming?

  Really appreciate for any help and answer including HP support.

  It's really annoying to have this problem and get stuck without a solution. I just enjoy this new Tablet HP for 2 days and now unable to connect to the 4G network more.

  Thank you.

  Kind regards

  Wachyu

  I finally found the problem with the HUAWEI ADSL Module in my stream 8 HP (after 2 days of sleep trying to install and uninstall the driver and try all options).

  It seems maybe some Windows Update or a driver is trying to change the firmware inside the card top debit MOBILE HUAWEI to download mode (VID:12 d 1 PID:1568), so it can't use any driver installed in point 8.1 of Windows.

  I tried to manually change the download mode inside the HUAWEI tools firmware: Revskills (B. Kerler credit) return to the standard mode and then reset, then the Device Manager will detect again under the new material in NIC as HUAWEI Mobile Broadband Module (VID:12 d 1 PID:1570) and automatically installed its driver from Microsoft.

  VOILLAA, My Mobile Broadband can now be re-used to connect to Internet and now also presented in the connection.

  A lot of delicate here to force Windows using HUAWEI driver to use the COM Port to communicate with the card mobile broadband HUAWEI inside and then using Revskills tools to change the mode to return to standard mode.

  If someone knows this problem and wants my help, just ping me and I'll be happy to help you in the orientation.

• Satellite P100-188 starts after the upgrade of the wireless network card

  I recenty installed a new Intel 5100 Series 512AN_MWW Mini PCI NIC in my Satellite P100 - 188 PSPA3E database.
  However, when it is installed, he refused to view and start.

  I'm sure (read the technical info) that these cards use the same interface.
  So why it won't work?
  Is an update of the BIOS to enable a feature. If so, could someone kludge one together please?

  I have the latest version of the BIOS installed 4.70 and am running Windows Vista.
  I am desperate for this that I already have a project N AP 2.0 and want to use it to its full capabilities.

  Cheers, Rob

  Hello

  If I understand your message you have improved the Interior card WLan Intel (Golan) Intel 3945ABG 802. 11a / g to Intel 5100 with project support.

  Boyfriend although it seems that you can't use the WLan draft N card in this laptop model.
  Seems such card is not compatible and cause interference.

  As I know the Draft N need of 3-wire antenna the antenna Satellite P100-188 supports 2 wires only and can be used with the 802.11 A, B or G standard.