Satellite Pro 6100 Power failure

Similar Questions

• Satellite Pro 6100 does not recognize the single battery external power

  Whenever I have start Satellite Pro 6100 Win XP Pro with standard battery mounted and connected to the power supply computer laptop does not recognize the ext battery supply single supply and during 'start-up' goes into hibernation.

  By pressing the power on button laptops "wake up" and indicate that the battery is empty or may not even decide when completely loaded, then says connect the station even if still connected, looking under Toshiba console when it runs shows running on battery when still in the power of the ext?

  I have two batteries and both give the above symptoms even when I remove ext of laptop power always runs with power supply by battery but no light orange or green for battery.
  Any ideas?
  Concerning
  Phil

  Hello

  Is your AC adapter malfunctions or there is something wrong with the power supply to electronic s laptop.
  In the first case you could purchase a new compatible AC adapter and could check if the laptop can run successfully.
  The second possibility is a serious hardware problem, but in this case, the laptop must be checked by an authorized technician.

• Satellite Pro 6100 does not start - power light flashes

  Hello

  I have a Satellite Pro 6100 when I press the power button and HDD lights up briefly then powerlight blinks.
  It seems to Flash a pattern: on (2 sec) flashes (2 seconds) then off (about 8 times)

  What he told me? No fan, no display no hardrive is active.
  Food is ok because it load battery.
  I bought it as it would be something easy to fix ideas?

  Hello

  It sounds bad
  Generally, the power led will blink due to a malfunction of the equipment.
  The LED provides a microcode and only the technician can read this code.
  A common user is not able to read.

  Maybe you'll be able to read this code, but you won't find any description about the meaning of the code.
  I recommend you contact the technician in your country

  But try this:
  Remove the battery and unplug the AC adapter.
  Wait severla times and then plug in the battery and plug in the AC adapter.
  If this does not help, you have aks, a complementary technician...

• Satellite Pro 6100 turns off when I connect the power adapter

  Satellite pro 6100 works well up to this I put AC adapter / CC, then turns it self
  Any ideas would be appreciated

  see you soon

  Hello

  You use original Toshiba AC/DC adapter or another?
  What happens if you connect the AC/DC adapter, while the laptop is turned off?

  It s really strange problem, but I think that is s TI associated with AC/DC adapter or the motherboard itself

• Satellite Pro 6100 stops after 15-30 minutes

  My satellite Pro 6100 Cup after 15 to 30 minutes of operation on power outlet. There is a noise and all the lights go out except orange slow flashing (power problem). I have restore by removing the power cable and wait a while.

  It will then start again. I used two different adapters and two different batteries. It also happens if work on AC with no battery in the. My suspicion is an overheat cut-out. The Sat Pro has a? Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in. Advice much appreciated. Thank you.

  > Could it be clogged with dust inside (it is 5 years old)? If yes how I clean. I don't think it's a fan failure because I can hear the fan cut in
  I agree with you and the user SambadeAmigo. It seems like a simple problem of overheating and so the laptop automatically stops to prevent the equipment from damage

  I assume that your laptop can be enabled again after being allowed to cool. It is a common question if the cooling modules may not work properly because of the dust and debris.
  As suggested, it would be possible to remove dust using the can of compressed air.
  It should work.

  See you soon

• LED flashing - need to know the Satellite Pro 6100 POST error codes

  When I tried to turn on my Satellite Pro 6100 laptop the Green DC in power light turned orange and started to blink.
  It flashes 5 times, then 3 times then repeats.

  I guess that this indicates a failure in the system, but where can I find what means this error code?

  Hello

  You can read the flashing code very easily short flashing means 0 long average 1.
  Then you read the complete code back.

  Finally, the error code must be converted into HEXADECIMAL value and then a technician of the laptop could know what means this value.

  The ASP in your country should provide details of the mentioned error.

  Welcome them

• Satellite Pro 6100 - problem starting (light flashing Orange)

  On my laptop Satellite Pro 6100, seeing DC IN (first on the left) flashes orange and the laptop does nothing else (no display or sound). The light flashes for 8 times, has a long pause and then starts all over again.

  I tried a different adapter with no joy. It does the same thing if you use only the battery and if you run from the adapter without the battery.

  The only time wherever it shows a different light is when you take the battery out, put back in and hold the power button. Led Slim Select Bay (second right) briefly turns green, but it turns off and the led DC IN resumption of the orange blink.

  It seems likely that it is an internal hardware problem (power supply, motherboard, etc.). Does anyone have any ideas? And as anyone knows anywhere which lists all the different orange light codes for Toshiba laptops?

  Hi André,.

  You are right in thinking that there is a hardware failure (most likely your motherboard). Flashing codes are used by service technicians to indicate the nature of the fault and I have yet to find anywhere who publishes the real meaning of these codes.

  I think it looks like a trip to the nearest Service Agent. :-(

  HTH

• Satellite Pro 6100 - battery acting very strange.

  As mentioned in the title, my laptop battery is very strange.

  The symptoms are:

  When the battery is flat after only 7-10 minutes he turns not, however if the battery is removed and placed in the laptop, the laptop will start as it has never happened.
  Not only that, but the bonus after the first can indefinitely until this that loaded into an OS and immediately after starting start the laptop stops due to an apparent lack of power, when there is power always, enough to do the same thing again. Also, the battery can still start even after being just in a freezer.

  This reacondioned back to normal battery or is this safe to use battery?
  Thanks in advance!

  Hello

  I guess that your battery is old like machines of this Satellite Pro 6100 and maybe it can't be charged more. In this case, your battery should be replaced.

  But even if the battery is faulty, you should be able to use the device connected to the power adapter.
  So even if the battery is removed, you could power the unit with the mains.

• Satellite Pro 6100 - code beep at startup

  Hi all

  Just picked up a 6100 Pro of the Satellite with a few problems.

  It lights up, he pointed out the HARD drive and I can hear the disk activity. However, the screen remains blank and a single beep can be learned after 20 sec. White screen, as I understand it, is probably the issue of Council power raging in the SP6xxx series. However, the beep I do not understand.

  I know that 2 beeps or 3 beeps is incompatibility of memory but no one knows which denotes the beep?

  Ta

  Hey Buddy,

  To be honest it's not easy to say what the cause of the problem because it could be everything and Satellite Pro 6100 is old enough for laptop.

  You have two memory modules RAM? If so remove a module. Always try a module only at the same time and test it in the slot of RAM A and B. A module is may be defective or a slot.

  If this is not the case, there seems to be a problem with the motherboard or the CPU itself. If you can exchange these things, try it yourself as a repair would be too expensive for this good old classic I think.
  Second hand spare parts you can get it on eBay s worth a try! ;)

• Satellite Pro 6100 himself turn off

  Hello

  I'm from the Italy. It is 3 days that my Satellite Pro 6100 after some time (it can be 30 minutes or 3 hours) close itself.
  I tried to update bios version 1.70 to 1.90 without any result. I tested my HARD drive and it works fine. I formatted and reinstalled Windows XP Home SP2 Pro edition but the problem that it is still there.
  When it crash, reboot, it seems 'BAD RTC BATTERY' and "BAD CMOS", I have to press F1, then I exit without changing anything.

  I saw that 3 weeks ago appears at the beginning of this message: "PXE - E61 MEDIA TEST FAILURE CHECK CABLE"and"PXE - MOF OUTGOING INTEL PXE ROM" but works laptop well until 2 days ago.

  I don't know why, but every time I restart now stop when WINDOWS XP is on the window (not the first logo on page WXP black) cyan, but the second on the window cyan; can do work that I have to press CTRL + ALT + CANCELLED and it go to the desktop.

  I don't know what to do? Center of Toshiba, it is far from my town, if you can help me will be appreciated.

  Sorry for my English, I read a few post but exactly with my problems, there is no job.
  Thanks in advance, it's a great laptop I jump to save it.

  p.s. There is no dust on it, I tried to lift the keyboard to clean, but it was already clean, even behind the fan.

  Hello supertraz,

  On 6100 laptop there is a soft spot between the control panel and from the motherboard, causing this malfunction. You will not be able to solve this problem simply raise your keyboard and blowing air into your laptop.

  A good description on this problem (I had, too) can be found on this forum posted by user seintaxx here:
  http://www.eXpansys.com/ft.aspx?i=104221&thread=7

  A photo of the defaulting party is here:
  http://img204.imageshack.us/img204/3/sp6100fixby1.jpg

  Good luck with it.

  Kind regards
  chain

• 'Bad RTC battery, check the CMOS' on Satellite Pro 6100

  Hello... I just got a Satellite Pro 6100 and when it is started I get an error message:

  RTC BATTERY BAD
  BAD CHECKSUM (CMOS)
  Check the system. Then press the [F1] key
  _

  I can still use the laptop for about 15 minutes, but then it crashes. I did some research and discovered that it is the power supply Board. But my laptop is out of warranty and the reminder is now officially over.

  Y at - there someone who can help me?
  Thank you
  Liam

  Published by: admin

  Hi Liam

  Hmmm... I think it s not a Council but the battery of the CCF.
  Take a look in the user manual. There you should find something that exactly the message is displayed if the battery RTC (BIOS) is not charged.

  The RTC battery, you must connect the power adapter and should run the laptop for about 24 hours.
  After that the main battery has been charged, then the RTC battery starts to load.

  It will take a little longer.

• Satellite Pro 6100: very slow recharge battery

  I bought a new battery pack for my Satellite Pro 6100 because my old Battery Pack loaded very slowly, about 5 per cent in 12 hours. But it turns out that my other one has the same problem.
  The problem may be the charger or the laptop.
  I already tried to unload the batteries fully.
  Can someone help me.

  Hello

  It is not easy to tell what can be the problem, but if you use the new battery pack and the problem is there, it is possible that electronic power on your laptop is not working properly.

• Satellite Pro 6100 - battery icon indicates 0% and courier mouse disappears

  Hi all

  I'm new to this so hope I'm posting in the right place.

  I have the laptop above Satellite Pro 6100 and am having some problems that I hope that you guys may be able to help me with.

  The first problem is that the battery is fully charged, but the icon on the screen says 0%.
  He fled feeding okay and if you disconnect battery lasts for all time and a half.
  If I try to defrag it does not have enough power?
  So I have to defrag in safe mode.

  The other problem is that the mouse disappears off the coast of the right side of my screen and it takes forever to find him!

  Would appreciate some advice or solutions like like the laptop and not really wanted to get a new one at the moment.

  Oh am running windows at home.
  Thanks in advance.

  Eve x

  Update the BIOS and set the default values.

  You could try reinstalling the common Modules for Toshiba and energy savings.

  If all else fails, there is the opportunity to back up your data and run recovery. If it happens again on a new installation of Windows, it may be a hardware problem.

• Re: What can I do to get my Satellite Pro 6100 from the dead?

  It's now quite a few years I have a * Satellite Pro 6100 *. I recently had the following problem.

  * _Problem_ *.
  When I press the power button to turn the computer into the AC power light starts flashing orange light (flashes come in groups of eight, the second and eighth flash are longer). Nothing else happens: the computer is dead as a brick. To stop the flashing, I have to disconnect the main power supply and remove the battery.
  * + Note: the power supply is ok.

  * _Question_ *.
  What should I do to restore normal operation?

  Thank you

  Post edited by: hnav

  Hello

  I put t think you will be able to do anything that would bring back the laptop from the dead.

  According to your description books sends a flashing error code that appears always if a motherboard error has been detected.

  In your case only an ASP might help you.

  First, the technician would be able to read the code and then to know what part is malfunctioning.

  In the worst cases, the motherboard must be replaced; (and this could be a costly affair.

  Good luck

• Hardware upgrades to Satellite Pro 6100

  I own Satellite Pro 6100 - PS610E-NGYSC-EN.

  What is the maximum memory (more), processor and hard drive you can put in one of these laptops. I've included the part number in the title of reference. Also where can I get a new power supply and the battery?

  Hello

  The upgrade of equipment is possible, but not all the pieces are extensible; for example, you cannot move the CPU or GPU.

  What you can do is an upgrade of the HARD drive and memory.
  As far as I know that this series supports PC2100 DDR - RAM (512 MB PA3164U - 1 M 51 part number) modules and you can improve it to max 1024 MB (2 x 512 MB).

  The laptop also supports the HARD disk with an IDE interface.
  I think a 60 GB HARD drive, or maybe a 80 GB could be compatible.

  I also found a compatible battery and mains adapter:
  Battery Lithium - Ion 10, 8V 600mAh 3, part number: PA3191U
  AC adapter - AC 100-240V to AutoFix, 50-60 Hz, 15V 5A 75W reference PA3083U-1ACA

  Hope this information can help you