SC network can be on the same network as the network of the vm?

Similar Questions

• Can I deploy the same virtual machine to VMWare Player running of several PCs without network problems

  Hi all

  I am a newbie so please forgive if this is a stupid question...

  Can I deploy the same virtual machine (XP Pro), with the same machine name and the same GUID for several machines on a network without going through issues such as errors of names duplicate etc. Or will I sysprep prior to deployment.  If so, is there an easier way to do it?

  Not sure if this is important, but I need to use Bridged networking due to problems with our personal firewall.

  You will need to deal with the dupe GUID. Sysprep is a method.

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• LaserJet MFP M177fw Pro: M177fw can scan over the network

  Hello

  I would like to know if the printer permissions 'M177fw' to use the scanner to a pc connected via LAN. (based on analysis of the computer or send the scan from the printer to a network folder)

  I found this information on the manual.

  Thank you

  Hey @mariwf,

  Yes, if you have the printer connected to your wireless network, you can scan all the same that you would be using a USB connection. You don't have to use the built-in Web server, you can open and use the HP scanning software.

• I installed Windows XP Home Edition. Can not find the wireless network drive

  I installed Windows XP Home Edition on my spare PC.  Now I have wireless network card in the computer and problems to find the drivers for it, and I don't know what brand it is, so I know it's kind of makes it harder too.  Then I also have to start the computer, but if I press F1, the computer starts well

  I was just wondering how can I get rid of this?

  

  Disable all devices that can connect to your router (wired or wireless)...

  • PCs
  • Laptops
  • Tablets
  • Smartphones
  • Smart TV
  • Printers
  • Networked storage
  • Another thing that I have not mentioned above!

  Put on your router and wait for the normal light distribution. Then turn on all devices.

  I hope that your ip address conflict went away. Generally ip conflicts can happen when the router is running again without doing the same with all devices later.

  If you have even an ip address conflict, it is possible that you forgot something above or can someone use your router without your knowledge.

  Your router's wireless network is secure? Ideally with WPA2 encryption?

  Tricky

• I can connect to the internet, but not to my home network

  I have a PC running Windows XP SP3, which is connected to a Linksys WRT300N router. I have access to the internet. I can not connect to my home network; don't know what happened. all (3) computers are set to the same workgroup name. I can't find anywhere in the network settings for WinXP that relates my network name. Help!

  Thanks for any help you can provide.

  John

  I guess that the other two computers are working properly and that it can network together and that the only problem is the XP machine.  I'm also assuming that this problem persists when the firewall was disabled (including hidden like the one in the Cisco VPN client).  I also assume you mean by "is no longer connect to my home network" that you can't see other computers in your network neighborhood. See if this article helps you:

  "You can't see the other computers in the workgroup on the network on a Windows XP computer"
    <>http://support.Microsoft.com/kb/903267 >

  If this does not help, try to walk your way through the following:
  "How to troubleshoot network domestic in Windows XP"
    <>http://support.Microsoft.com/kb/308007 >

  HTH,
  JW

• in my home network xp laptop in 'My network places' can't see the two other vista computers portable altought they can see computer laptop xp

  in my computer laptop network xp home in my network places can not see the two other vista computers portable altought they can see xp laptop computer and access this computer laptop xp shared docs, laptops 2 vista can see eachother so working group name is on all computers the same portable 3, all are connected etc. What can I do to see the portable 2 on my computer vista laptop xp

  Hi wiking17,
   
  Follow the suggestion given in the article below to resolve this issue:
   
  You can't see the other computers in the workgroup on the network on a Windows XP-based computer
   
  Additional reference on:
   
  Troubleshooting of network domestic

• Can't see the available wireless networks

  I bought a new router (netgear300) and tried to connect to it. For some reason any would connect to my computer, but it has not been through the modem, so I uninstalled the network card and reinstalled and rebooted the computer. Now, I do not see the wireless networks available and cannot connect to anything. I tried to download the readers online, connect to the network manually, but nothing seems to work. I get 3 error messages when I try. They are; 1 reset your wireless, 2 network adapter. the NIC "atheros ar5007 802. 11 b / g wifi adapter "known issues of pilot or related equipment, 3. Make sure that the internet protocol bindings are correct. I did all the and still nothing seems to work, and I still don't see the available wireless networks. Nothing has had this problem before? My laptop is a compaq presario f700 model. I am currently using windows vista Home premium and have the cd of windows 7 Professional, but I don't know if the upgrade with this question will repair or remain the same. Someone knows how to fix this?

  Hi Mattcreatr,

  1 can connect to the router with other machines?

  Step 1:

  Make sure you have the latest NETWORK adapter drivers installed.

  Also, see if there is a software that goes along with the drivers.  If so, get the latest version of this as well.

  Update drivers: recommended links

  Step 2;

  Also, see if there is a software that goes along with the drivers.  If so, download the recent plus version and that as well.

  Also, make sure that the wireless adapter is turned on.

  a. Click Start, type network and sharing in the search box Center start and press ENTER.

  b. click on change adapter settings.

  c. right click on the connection, and then select activate.

  Step 3:

  Alternatively, you can perform a restore of the system to a restore point where you do not experience the problem and check.

  Start your computer in safe mode

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Can not get the new laptop to connect to my wireless network but connects to others

  I have just bought a new laptop Dell Inspiron 1545 to Dell.com and have tried to set up the wireless internet for the past hours. The laptop running Windows Vista Home Basic Edition, & my wireless router is an Apple Airport Extreme Base Station (about 4-5 years). Below is a list of problems / advice I've come across so far:

  (1) when trying to connect to a network, my network don't appears in the list of local networks sporadically even if she lost the signal strength of any nearby wireless signal (I must refresh the list to make it appear sometimes)
  (2) when my network is displayed in the list, it is described as a network that is not secure; There are 2 others that come and go in the list that are also not guaranteed, but I was able to connect through one of them.
  (3) when I try to connect via my network it either says unable to connect immediately or poster progress bar, then after a minute or two, says that it cannot connect.
  -to diagnose the problem, I can exclude is not not in the range of my camera as I tried to connect when I'm 2 feet more far
  -It also says view wireless connections again and try again, but this brings me to the same screen
  -L' diagnostics screen mentions that "the network is"hidden"and is either not in range of this computer or wireless settings on this computer do not match the settings of the network." (is there a setting I'm familiar with that?)
  (4) I checked device drivers and all said that they are working correctly
  (5) I can connect to the internet via a direct connection to the router via a cable ethernet not wireless

  In my view, that it is all the information I can provide about this problem. If you need more information, such as the specifications of the system, let me know where to find them and I will re-post. Thanks in advance for any help provided.

  -Jeremy

  Well, it looks like the old router was the problem. You have a new N Wireless for about $80 as suggested and it works like a charm. At took 5 seconds for your laptop to recognize and connect to it and were without problems since then. Thanks again for the help guys... I hope that I won't bother you again =)

  -Jeremy

• Windows 7 can not find the network

  Hi guys I hope that someone can help me, I walked trough the forums but none of the above helped me. I also do not really understand some of them. But that's what happened. My internet was fine yesterday, I was watching some stuff on aliexpress when my mouse froze, I tried to restart the laptop, but nothing worked so I had to remove the battery. After that the computer took forever to turn back and when he did my computer did not find my wifi more. I ran the following anti-virus, I tried the steps in the verification of all past system. I went in Sync Center, I have trid addition in manual, I tried to search for a wifi switch (I don't think I have a) I tried to restart the pc and the internet, I tried the system restore, I don't really know what else to do. Any suggestions?

  Hi Kate,.

  Thanks for posting your query in Microsoft Community.

  I understand that Windows 7 can't find the network and I appreciate the efforts made to try the patches. Let me ask you;

  • Restoring the system led?
  • What exactly happens when you try to connect to the Wi - Fi?

  This could be due to several reasons, including any third party software conflict. Try the following methods and check.

  Method 1: Start the computer in Mode safe mode with network and check if the problem persists. If the problem does not persist in SafeMode with network, put the computer in a clean boot state and check.

  Step 1: Start the computer using safe mode with networking

  Safe mode with networking is an option of troubleshooting for Windows that starts your computer in a limited State. Only basic files and drivers needed to run Windows are started. Safe Mode with networking appears in the corners of your monitor to identify which Windows mode you are using. You can use the internet connection in this mode.

  Please refer to: , start your computer in safe mode

  Step 2: Perform a clean boot in order to avoid any conflict of third party software.

  To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Method 2: Update the network adapter

  Step 1: Update the driver through Device Manager

  a. click Start , type Device Manager and click on it

  b. expand network adapters

  c. make a right click driver, and then click Update driver software

  Step 2: Install the Windows updates pending

  To check the updates:

  1. Open Windows Update by clicking the Start button . In the search box, type Update, and then in the list of results, click Windows Update.

  2. In the left pane, click check for updates, and then wait while Windows searches the latest updates for your computer.

  3. If you see a message telling you that important updates are available, or you say to look at the important updates, click the message to view and select the updates to install.

  4. In the list, click the important updates for more information. Select the check boxes for the updates that you want to install and then click OK.

  5. Click install updates.

     Read and accept the terms of the license and then click Finish if the update requires it. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Step 3: Visit the computer manufacturer's support Web site and install the latest network for Windows 8 for the same model of device drivers.

  Additional information:

  Wireless and wired network problems

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Residential Group / Network ID Issuee as I can't get the homegroup to connect to my home network

  I am running Win 7 Pro on my laptop and can't get the homegroup to connect to my home network. I have two other computers (wired, one wireless) which are connected and share without problem and can even see (that) the name of my laptop on the network home.

  When I run the troubleshooter to homegroup, it is to identify a network problem, but the next step cannot identify a because my laptop connects wireless both at home and on the road. I think that the problem is in my setting of the network ID and the Discovery Mode as when I try to change the setting for network ID for 'Home' instead of 'Business' it resets right back to business. Same thing happens with trying to turn the discovery mode 'On', it is 'Off '.

  I appreciate all the help that I have been fighting this issue for awhile now and just have not had time to fix.

  Thank you

  Robert

  Hello Robert,.

  Here are the network discovery. Since they may not appear in the Windows Firewall, the place to download Simple Service Discovery Protocol (SSDP-In) and outside, you try to check these services whether or not they are running.

  Follow ' Sebastian Woolley"" "response on August 18."
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/cant-turn-on-network-discovery-and-media-streaming/98654e71-4BFF-4DD3-ACEC-ffc3524d44a4

  I hope this helps. Feel free to write us back for assistance.

  Thank you

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• E430 - no internet - but can connect to the network. Any idea?

  Hi, I had a really frustrating problem.

  I can connect to wireless and wired networks, but in both cases, after about 5 minutes, I can't surf the internet (on any browser) for about 10 minutes and none of my programs who need internet access. I had the same problem at home, school and work.

  I tried windows 7 convenience store and all he says is that "the diagnostics policy service does not work" and "explore additional options.

  I tried to reinstall the netwrok card, no luck.

  Can anyone think of anything whatsoever?

  Thanks in advance!

  I have windows 7 64-bit of the E430

  Try to reinstall ThinkVantage Access Connections and let me know if that helps (use this link, under ThinkVantage Technology):

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&docid=HT073272

  I would also like to launch ThinkVantage System Update from the same page.

• can not find the wireless network

  Hello

  I hope someone can help. Today, I got a new installed wireless router. Until now my main and most recent computer can connect to the internet fine (so I know this isn't a network problem), but my old computer does not find the network when scherching of available networks, it may pick up other networks and communicate with them simply not my own. It is the first time that I am trying to connect to this wireless computer.

  The computer is a HP pavilion t770.uk Windows xp sp3.

  You need to replace the network adapter. The current NIC is older than the specification of N, so it can not communicate with this Protocol.

  You can try to configure your router and the new pc to use b, if they allow.

• Can't get the Time Capsule network to see Airport Extreme?

  I have a network set up through my Time Capsule and I want to express with my Airport Extreme, the problem is that I can't get the network to see Airport Extreme - or rather, we'll see, but when I try to connect to it, it starts to connect, and then I get an unexpected error. I tried to restore both their factory settings and did a restore forced several times to the Airport Extreme, but nothing helped. I made sure to affect my IPv6 link-local only, I've even re-created my network several times (always with the Capsule of time as the main base station, but nothing seems working.

  Any ideas would be very useful.

  The Airport Extreme and time Capsule have been purchased during the last month, and I'm under OS10.11.1

  First of all, try to update your software El Capitan to the current version of operation... 10.11.4... which was supposed to solve some of the bugs that cause the message "unexpected error".

  If still no help, try using an iPhone or an iPad for the configuration.  After the back if you don't know how to proceed.

• Tecra Z50 - A can't see the mobile broadband network

  8.1 Windows does not recognize the Sierra LTE mobile braodband on my Tecra Z50.-a.
  There is no software on the Toshiba support site. Observer of Sierra drivers or AirCard.

  He can't see the material in my equipment manager.
  Can't see the mobile broadband in the network domain.

  Need help!

  Thx a lot

  Can you please send full model of your laptop Tecra name?
  By the way: do you use the original pre-installed OS that you got with your laptop?