Malware scanner vs IPS network

Similar Questions

• Scanner on a network on XP

  I have a printer/scanner HP CM2320 connected to a LAN network in which all computers use XP. I am able to print on the printer to all computers on the network, but I liked being able to scan from all computers - in other words, I would like to be able to tell the scanner to scan a document to a shared drive to any computer. Is it possible, and if so, how do I set up?

  This would require the software support from HP.   Please refer to the product User Guide and see if it allows scanning and network installation.

• Trying to access a scanner on the network

  I have a wireless set up at home and shared the printer/scanner already. I can find it & print it from any computer on the network. However only the computer, it is physically connected to will allow me to scan anything. Is there anything further needed to be able to scan as well an impression on the network?

  Hi Mr. Rick Kelley.

  Please see the following article with useful information about your question:

  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Malware scanner found hundreds of viruses. What to do now?

  Hello

  my friend has a laptop Toshiba, model no. PSAK2E - 001003KS. She came to tell me that she can you use his cell phone and when I started the laptop, it says hard drive failure and it still allows me to start window.

  When I checked it didn't even run anti virus, so I scanned the virus with a malware scan, the scan has found hundreds of viruses even in about 10 minutes. But the thing is that the laptop shut itself down before the finished scan, and everytime when I start it, it turn off by itself after a few minutes of the window being initialized.

  Do you think that the cause is malware? But no idea how I can clean while I can not even finish the scanning?
  Thx a lot...
  Appreciate it

  Don t waste your time to scan the HARD drive. Reinstall the OS and restore your laptop to a friend with your own OS preinstalled.

  Believe me, it's the best thing you can do.

• ScanJet N6350 - cannot detect the scanner on our internal network.

  Afternoon,

  Product details:

  ScanJet N6350

  Operating system: Windows XP

  Error: Could not find the network N6350 scanner when you use the HP software.

  Changes: There has been no change to my system.

  Hope someone can help me with this:

  I am trying to add my scanjet N6350 to our corporate network, I have assigned to the internal Ip address bad ETC. and can travel to the scanner internally.

  However, once the installation of the HP software to connect the scanner to my machine, cannot find the scanner on the network.

  Thank - you

  Well, it turns out that:

  Even if it wasn't the error is displayed when you try to connect the scanner, it turns out to be the solution to the problem and I am now able to Scan over the network.

  Before installing the Scanner, follow these steps on the local computer.

  1. Please click Start and select Control Panel.

  2. Click on system and select the Hardware tab.

  3. Click the driver signing, you will be directed to the driver signing options window.

  4. In the window the driver signing options, select the ignore - install the software when even and don't ask for my approval, make this action the system default and click OK.

   

  After these changes, if necessary, reboot the computer so that the changes will take effect, and then try to re - install the scanner software.

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.

• Is it possible to make a DYI check for viruses and malware on an iPhone 6 more?

  Is it possible to make a DYI check for viruses and malware on an iPhone 6 more? Thanks in advance for your help.

  I don't know what it means 'DIY', but there is no virus and malware scanner available probably since there is no malware and virus scanner for now.

• Photosmart C4680: Photosmart C4680 on homegroup printer-considered, but not scanner

  My home network includes a Dell XPS-18 running Windows 8.1 Pro and a Toshiba Satellite running Windows 7 Home.  Our Photosmart C4680 is connected to the Toshiba by USB.  It is shared and is available on the network.  It is used by the XPS for printing and never a problem as long as the Toshiba's online.

  However, I can't find a scanner.  I used it for printing without having to install any software.  When I couldn't find as a scanner, I have installed on the XPS, the HP software suite which is available for download from the HP site, in the hope, there was a special driver for scanning, which would be added.  But that does not change.

  The Toshiba can scan from the C4680.  And I can connect to the XPS via USB and also find a scanner by, for example, opening Paint.net and go to "file |" Acquire | From a scanner or camera.  But when the printer is shared via network it is not considered a scanner on the XPS, although I can print to it.

  How can I use it as a scanner on the network?

  Hello

  MS Windows alow God a printer or files and folders, there are not any sharing scanner capabilities.

  Scanning can only be done from the PC that have plugged USB cable, to scan multiple computers, you will need a network connected device, it can be done with a USB device.

  Kind regards

  Shlomi

• Network scanning multi-page Officejet Pro 8500 a w/o ADF (Vista and HP Print software)

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  My version of Vista is 6.0.6002 Service Pack 2 Build 6002.

  My HP Officejet Pro 8500 has e-all-in-one printer - A910a is the standard model, for example, the premium product of mid-range. It is connected by LAN cable. It scans, prints and can provide the status of ink level.

  The 8500 is connected via the network, and on a Vista PC, I use a desktop icon to launch "HP Officejet Pro 8500 A910.exe". The new software is very different from the [Photosmart c6150 dead] [uninstalled] old HP Solution Center, and I looked in the new textbooks at least briefly, so I hope someone can same thing me some time with a basic question/issues scan. My research forum has failed, but if someone has a link to a relevant thread, that would be appreciated.

  Without using the ADF on the 8500 has, can I scan multiple pages in a PDF file if the scans are done from the PC? How?

  I also tried scanning browser based and there is a drop down for sweeping on both sides, but the drop down menu is not activated and cannot be used.

  I only went through the configuration of the network folder, which may be necessary to get the ability I want. On this subject, I wonder if I set up a folder for all users, or just for my login.

  Thanks for any help!

  Success?

  Well, I created a folder network and was then able to scan to a PDF file of several page without using the ADF (ADF) documents.  To do this, (1) install the software provided with the Officeject Pro 8500 has, (2) the installation program a network folderand (3) run the scan of the touch screen located on the Officejet Pro 8500 has.

  (1) install the software supplied on CD (or probably downloaded from somewhere near here). You may be able to work with only the web browser interface, but I wasn't before install the software provided on the CD, and I suspect that some software is required on the PC.

  Install the downloaded software or the software provided on the CD-ROM titled

  HP OFFICEJET PRO 8500

  A910

  (2) Setup a network folder. The installation of the software created a few new icons on my Vista PC.  Double-click the icon of the desktop titled "HP Officejet Pro 8500 A910". On my Vista PC, it runs,

  "C:\Program HP HP Officejet Pro 8500 Officejet Pro 8500 A910.exe A910\Bin\HP"

  An application window should appear. Mine has a title, "HP Officejet Pro 8500 A910 (network).

  The application window has a section of Scanner Applications on the left. From there, the scanner to the network folder Wizard. Which can be done by double clicking on the 'scan to network folder Wizard"or by the first double clicking on"Scanner Actions"and on the screen that appears, click on"Scan to network folder Wizard.  Otherwise, you can get this done through the web browser, if you know the URL for your device's built-in web server. Because I use my DHCP router (to allocate IP addresses in my local network), I currently access the 8500 a of http://192.168.1.19/. From there on, I can access the Scan tab, and I can access the ability to "Setting up the network folder" on the left.

  Using the scan to network folder Wizard, I clicked on New and used the Browse button to select "C:\Users\Gordon\Documents\My Scans" to set up a folder named "Gandalf Gordon". The next page of the wizard, it will take your network password (or local password if he is counting on the local PC) required to access the PC where the path "C:\". "sailed above is located. When I clicked on finish, the wizard opens a web browser which indicated a certificate error. I chose to continue to the site, which turns out to be the web server integrated in the 8500 has. So now you know a URL where your built-in web server on your network if you were already uncertain. If you do this URL a favorite browser, the favorite should work even if the IP address of the 8500 a is changed in the future.

  Display (3) initiated a sweep of the touchscreen located on the Officejet Pro 8500 a. tap the icon "Scan." Tap the 'network '. Select the network folder. Place a page to scan on the glass of the scanner without using the automatic document feeder. Press 'Start Scan '. When the touch screen prompts, "Page another Scan", select 'Yes', place another page on the scanner glass and click, 'Start scan '. When the last page is analyzed, answer 'No' to the prompt "scan another Page.

  Note: When loading pages additional manually, you have to work a little faster or unit will then expire and close the file with as many pages that you managed to scan. I did three pages as a test.

  If there's a better solution out there, please share!

• setting up scan to network in a Mac environment

  Our office is based Mac and we use a Canon Image Runner 2535i as our scanner and a network printer.  It works very much like our network printer, but we don't get anything from the scanner.  We connected via an ethernet cable.  We lack of OS X Lion. 10.7

  Anyone have experience with this and could lead you throug setting this up?

  I discovered that the runner ir2535 CanonImage will not scan for Mac OS10.7 and later versions.  It is not for lack of Cannon, but when put Mac updated to 10.7 Lion, they changed something that has disabled the scan on this machine.

• I can't run all the files on my computer it shows either a spyware or malware has infected my computer

  I can't access any of my files on my computer anymore and I saw some pop on my screen that my HDD has damaged cluster and the RAM memory is extremely low... I do not remember to do anything on my computer to cause this problem, so I've read things about her and figure that maybe it's a malware o spyware but still I can not understand a thing about this and how to solve this problem, I was also wondering if I could still access my old files if I get my system working again... Thank you for any response I can get from this post... It would be a great help :)

  Hello

  What is the exact error that you receive when trying to open any file?

  Step 1: Virus or malware scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  http://www.Microsoft.com/downloads/details.aspx?displaylang=en&FamilyID=ad724ae0-e72d-4f54-9ab3-75b8eb148356

  Step 2: Check the problem in safe mode and after the same return.

  Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:

  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• How to check that the software is free of malware?

  Softpedia wants to test the software and gives a nice badge clean of 100%.

  I would do the same on other software. But how? In my opinion, they do something more than just running an anti-virus. Maybe run some anti-malware scanner or something.

  any ideas?

  http://www.Softpedia.com/progClean/7CMenuEditor-clean-174048.html

  Ty

  bump. any other ideas?

  Save the link below in your favorites/bookmarks. When you have a file you want to download it just open the saved favorite/bookmark. Click the send a URL tab and paste the link to the page that contains the download of the file. Click on the submit button. Temporarily allow pop-up windows. Virus Total then will analyze the website hosting the file with 6 assessment of sites as well as the file with 43 malware different scanners. Notes; If a new tab/window does not open automatically parse the file simply click on the 'View downloaded file"link following"anti-virus analysis report ".  You can also download files from your computer to scan

  http://www.VirusTotal.com/

  "VirusTotal is a service developed by Hispasec Sistemas that analyzes suspicious files and URLS allowing the identification of viruses, worms, Trojans and other types of malicious content detected by antivirus engines and toolbars to web analytics."

  Hope this helps.

  Kind regards

  Joel
  

  I do not vote for me I'm not here for points. If this post helps you, vote. Visit my forum @ http://repairbotsonline.com/

• 8 Win scanner without current driver

  I need to know if there is some way that RemoteScan can help me get around the following situation:

  I have a 10 year old well maintained and running RICOH is200e scanner network which is part of my network. The two courses Win 7 32-bit workstations work very well with it. I use it mainly for a TRA (AllMeds) and PaperPort. I have acquired a new office which is Win 8.1 64-bit. As RICOH came out the biz to scan several years ago, that there is no 64-bit drivers. I intend to run PaperPort on the new desktop 8.1 Win and want to use my RICOH scanner in a network. Is it possible that your software can help me get around the lack of a 64-bit driver?

  Thank you

  As long as the scanner network works with your existing Win7 machines (and they use a TWAIN or WIA network driver for the scanner, requiring RemoteScan function) and all these machines are on the same physical network, then you should be able to use RemoteScan to LAN. In this case, you could share on the Scanner one of the Win7 machines and Win8 machine would act as the client computer to receive the scan.

• ASA5515X-IPS management 0/0 to the LAN

  I have installed recently two ASA5515X in a/s each with the ID. When I got in the lab, I was able to access the IPS through EMI but now that he's in the data center it doesn't (of course). I have the IP addresses that are configured with an IP address on our local area network and the ASA Management0/0 interface configured as:

  interface Management0/0

  No nameif

  security-level 100

  no ip address

  management only

  Management0/0 interface is plugged into a switchport on our networks VLAN. The ASA's see the IPS that up, and I checked the IPS network settings. Any ideas? I forgot something? TIA!

  Hello

  Very well. Let us know any update.

  The person in charge of the case will have access to the area so that he or she will be able to run a few catches.

  It's weird that you don't have the MAC address of the IPS module on the switch, I would check the topology of layer 2 first.

  Kind regards

  Julio

• Windows 8 does not recognize the scanner

  I have two printers on network, a brother MFC9840CDW and a HP Photosmart Premium C410.  Both are multifunction devices and both are recognized by Windows 8 as Printers , but not the scanner. I uninstalled the drivers for the HP and reinstalled the but the scanner is still not recognized.  I can't reinstall the Brother drivers because the brother website says it uses the native player of Windows 8 and therefore does not download.  I have tried both Photoshop and Adobe Acrobat Pro to address scanners and neither of then is recognized by both programs.  Using Windows 7 machines on the same network, however, both are recognized as scanners, so clearly, it's a matter of Windows 8.  In addition, HP and brother have Windows 8 'apps', HP Scan and Capture and Brother Print and Scan, respectively.  The fact HP application recognize the scanner HP; application of brother do not recognize the scanner Brother.  I'm confused and need help!

  Don't forget to directly connect the scanner to the computer of victory 8 to test scan. Scanner-printers on network that are connected to another computer on the network can share the printer but not sharing the scanner. Scanners should be connected directly and use the software on a computer to scan. The exception is a network Wireless scanner-printer connected to the network router.

  Your printer HP scanner will scan with windows 8 if it is attached to the computer in windows 8, since the drivers are available HERE Connect that one to the computer that you use most for scanning and sharing the printer with other computers. And the Brother machine is also compatible with the drivers from This SITE , it is also presented as a printer scanner wireless network that you can connect to your router and share it on the network. Get directions to connect to the router of brother.