Screen Xperia Z2 problem
Hello!
I bought Z2 a month back and have problems with the screen. There is a bottom line and tried to change the setting of the screen but no effect. The change of wallpaper was also useless. I don't know how these poor quality mobile sony, and when I check on the net I found many topics with sony mobile Z2 next time I buy HTC never sony...
Use Sony PC Companion to attempt to repair your phone.
http://support.sonymobile.com/us/tools/PC-companion/
Tags: Sony Phones
Similar Questions
-
Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.
These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.
Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu
> options > advanced > General
. -
MacBook Pro screen re-recurring problem.
In November 2015, I got a replacement of the screen as my Mac anti-glare treatment wears.
Just one month later, replaced screen got weak horizontal gray bands that goes further, from right to left, I got a replacement of the screen before the end of 2015.
Now, the March 2016, I had some stripes of vertical pixels affected when I apply pressure on the screen. How can I fix?
Just in case you are wondering this odd task between the two, it is the slider. I want to show that the screen has some problems with it, so I place my cursor here to show that this isn't where the screen ends.
It is a hardware problem with no software solution. It will require a replacement.
You have not identified the EXACT MBP model you have and perhaps with the display problem, it could come under this replacement program. Read this link.
https://www.Apple.com/support/MacBookPro-videoissues/
Ciao.
-
Hello!!!
IM Apple Fan.
Purchased IM Ipad2, Ipad4, Iphone6
Last month I already buy s Iphone6 +.
Today I feel unhappy
MY IPHONE 6 'history '.
My touch screen has a problem after downloading the IOS 9.0.2.
Already called and try apple advises the steps. But the problem still occur.
Already done restart of strength. Factory setting Reset also possible. But still the same problem.
Only can be used for a minute. After that... The problem comes in again & again & again...
APPLE.COM
Can U help me
Only products of Apple of love before updating the version 9.0.2
iOS 9.0.2 happened some time. The last iOS is iOS 9.2. If you have not updated, updated. If you restored to the factory, it must have downloaded iOS 9.2. Also, if you restore to the factory and the problem is still there, then you must make an appointment at the Genius Bar to the nearest Apple store or Apple authorized service provider or call the Apple Support to have the device examined by Apple. There seems to be something wrong with the screen.
-
Original title: when I turn on the computer.
the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.
Hi Cjdaniello,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
-
You have an another "Black Screen of Death" problem on Vista 64-bit.
You have an another "Black Screen of Death" problem on Vista 64-bit. I downloaded and burned the CD to repair, and it loads fine. However, whenever I go into the options, it is not read my C: drive. It will not restore the system, it cannot run a "Startup Repair" and if I go in the "Command Prompt" and type "C:", it says that the device is not ready, so I can't change the registry to attempt to repair. Am I missing something that I need to do first in "Setup"? Note that without the disc, I go straight to the black screen with cursor. I can't go in Mode safe, I can't perform sticky keys, and I can't do anything else.
Any help here?
Hi AaronTom,
1. you remember to make changes to the computer, after which the issue started?
I suggest that you contact the manufacturer of the system for a Windows Vista DVD, and then try to perform a startup repair using it:
-
Blue screen errors the problem points to the files Volsnap.sys or Classpnp.sys.
Last month, I had a series of blue screens. The problem points to the files Volsnap.sys or Classpnp.sys.
I have a Dell Precision T3500, running 64-bit Windows 7 Prof. The system is configured with RAID.
Sometimes rebooting the system in the middle of the night and sometimes it freezes while I work on that. It is during the night to safeguard and Virus scanning using Trend Micro, which is the only type of trainer of spam on the system.
No idea on how to stop this would be really appreciated! Thank you
Hello
Results verified BlueScreenView WinDBG / DumpCHK.
make these problems worse. Uninstall it and run the removal tool to prevent
remains of troublecausing. The following recommendations to use during the test,
even better all the time.TrendMicro removal tool
http://eSupport.trendmicro.com/pages/how-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspxList of tools to clean/uninstall anti-malware programs
http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/------------------------------------------------------------
Here's what I use and recommend: (these are all free and very effective versions.)
Avast and Prevx proved extremely reliable and compatible with all I have
launched on them. Microsoft Security Essentials and Prevx have also proven to be very
reliable and compatible. Use MSE or Avast and Prevx, Prevx 3 but not all.Avast Home free - stop any shields is not necessary except leaving Standard, Web, and
Operation of the network.Prevx - Home - free
Windows Firewall
Windows Defender (is not necessary if you use MSE)
Protected IE - mode
IE 8 - SmartScreen filter WE (IE 7 phishing filter)
I also IE always start with asset if filter InPrivate IE 8.
(It may temporarily turn off with the little icon to the left of the + bottom
right of IE)Two versions of Avast are available 6.x and 4.8 x
Avast - home - free - 6.x stop shields you do not use (except files, Web, network, &)
Shields of behavior) - double click on the icon in the Notification area - real time Orange - click on the
Shield that you want to stop - STOP. To stop the Orange icon to show an error indicator-
Click on the Orange icon - top right - settings - click on the status bar - uncheck shields you
disabled - click OK
http://www.avast.com/free-antivirus-downloadAvast 4.8 x - home - free - stop shields, you don't need except leaving Standard, Web,.
and the network running. (Double-click the blue icon - look OK. - upper left - Shields details
Finish those you don't use).
http://www.avast.com/free-antivirus-download#TAB4Or use Microsoft Security Essentials - free
http://www.Microsoft.com/Security_Essentials/Prevx works well alongside MSE or Avast
Prevx - home - free small, fast, exceptional protection CLOUD, working with other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here
or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->PCmag - Prevx - Editor's choice
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspAlso get Malwarebytes - free - use as scanner only. If you ever think malware and that
would be unusual with Avast and occasional Prevx running with the exception of a low level cookie
(not much), to UPDATE and then run it as a scanner. I have a lot of scanners and they
never find anything of note that I started to use this configuration.==========================================================
The Bug_Checks were D1 (19 long happened if he should really
do not be in the mix) and CAUSE volsnap.sys classpnp.sys which are
Components of Windows, which means something else led in error.1. Uninstall TrendMicro as it has a role - is not enough to just disable
such that it will still load chunks of itself in memory.2 Volsnap.sys is the Windows volume shadow copy driver and disk problems
or other corruption could be at stake. Classpnp.sys is the SCSI class system
dll checking and disk problems will affect the it. Run SFC/scannow, and then
Checkdisk (chkdsk /f r).Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlThen run checkdisk (chkdsk).
How to run check disk in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html=========================================================
Other troubleshooting methods:
BCCode: D1 0x000000D1
Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2
from sleep or standby extended: "STOP: 0x000000D1".
http://support.Microsoft.com/kb/978982Stop error on a computer based on Windows Server 2008 R2 or Windows 7 during operation
system uses a storport virtual miniport driver to save a dump file or a file of hibernation: "0x000000D1.
http://support.Microsoft.com/kb/2320550Those 7 other KB Articles are available
http://support.Microsoft.com/search/default.aspx?mode=a&query=0x000000D1&SPID=14019&catalog=LCID%3D1033&1033comm=1&Res=10--------------------------------------------------
Think video drivers especially if it may be others. Refer to the section of driver in my generic bluescreen
methods of troubleshooting below. BIOS, low and antispyway/antivirus/security chipset drivers
programs may also cause this. Check the resolution of the problems and when you get to the pilot and sections tests memory refer to the generic methods in the next message and then returns to the resolution of problems
If necessary.Cause
A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.
This bug check is usually caused by drivers who used a wrong address.
If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:
- The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
- The function call was made to a function in another pilot, and that this driver has been unloaded.
- The function was called by using a function pointer that was an invalid pointer.
BCCode: d1 0x000000d1<-- read="" this="">-->
* 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-=========================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during 'blue screen of death '.
hangs and displays information about all accidents of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
-
Hi, pre-ordered Z2 and picked up Friday. Worked very well for the first few days and then yesterday when I turned on the screen had lines on it goes down and the screen got gradually lighter. Tried a reset, repair of Xperia software but no luck. Phone works fine otherwise, but there is a screen problem or a faulty software. Anyone else had this? I searched online and found that it is the same problem that some Xperia Z Ultra had last year. No idea if it was solved or if anyone has had this problem with their Z2?
Thank you Rickard, I advised O2 and they're organizing a swap of right this week. I am pleased to hear that no one else has this problem.
-
The phone automatically turned off, as I turned on the bluetooth and is not turn on again. It shows the sony and xperia screen over and over again... It comes to ICS and NOT rooted... Please help me... How to solve this problem?
Tried to remove/insert the battery and restart?
If problem still there I recommend you do a repair of the software phone via PC Companion from Sony:
Click on this link for Sony PC companion:
http://www.sonymobile.com/GB/tools/PC-companion/
Start PC companion, start 'Zone support' start "Update phone software" and click 'fix '.
Follow the on-screen instructions.
Let me know if you still experience this issue after the repair of the phone software.
-
Hello everyone!
I have a problem with my screen, namely before glass panel on my Xperia Z3 camera. Yesterday, I noticed that the glass wall is detached from the housing on top of my phone. It's just that the glue does no more. Now I'm confused... How could something like that even? I contacted the support Xperia already, but now I wonder is this 'situation' covered by warranty? Thank you!
No one will be able to answer this question, not even if you contact your local Xperia of care, they will know after that that they inspect your device.
-
screen/blacklight iPhone problem 6
Hello
I have an iPhone 6, it's a refurb of the Apple Store in Sheffield (Meadowhall) that my previous had a software problem. I had about 9 months.
I dropped a few months ago and cracked the screen slightly however I used it without a problem since, earlier I was selecting a photo to upload to Facebook on the app and my screen went black, I thought that the app crashed so I did a hard reset (button home + lock) and the phone does not seem to come back. The phone came back and the screen was completely responsive but not on.
I took outside and noticed that in the light of the Sun, the screen was visible, it's also appears if you shine a torch top. I took it to a phone store to have the screen replaced, they tried 3 screens and none of them solved the problem. Anyone know what this could be?
Drop the phone must have damaged some other pieces of hardware inside the phone.
But, if the 'phone shop' was not approved by Apple for service phone, Apple or an Apple authorized Service provider won't do much either.
In this case, you will have to hope that a 3rd party repair shop can find the problem.
-
Satellite Pro C50 - A - screen Black/Brown problem
Hi all
I want to share one problem that I have with my cell phone, just to see if anyone of you already experience or maybe you know some options how to solve this problem.
I bought a Satellite Pro C50 - A model in January 2014, with 8.1 Windows preinstalled. A few weeks ago, I lived for the first time the question.
Work with the laptop, the screen turns off suddenly. The laptop still works, that I've already connected to another screen and keyboard and the mouse works, everything. Even if you focus a little bit on the screen of the laptop, you can see the shape of what I'm doing, but very very dark, almost extinct.
First time it happened, I was able to fix after a few attempts, unplug the laptop DC and taking the battery, then pressing the power button / stop for 30 seconds. I had to do this several times, and then it started working.
The issue seems to be fixed, but yesterday it happened again, with the bad luck that do the same process is not enough... He worked for 1 min and then it turned off again...
I don't know what I can do, as last option I would like to reset to factory settings, but it's something I want to jump.
* Are there known error, malware or fault in laptops that could help me? *
I thank very you much in advance!
To be honest I have don recovery think t install image will help you.
I put t have this bad experience on my Toshiba machines but I sure it's material m unwanted and cannot imagine that recovery clean installation will change anything.
In the past, some people have reported on similar problems, and the reason was bad FL inverter.
The warranty is still valid, so I think that you contact the nearest Toshiba service provider and ask for help. -
Resolution screen NB200 - 10G problem
Hello
My new NB200 does not display the toolbar when it is started. This is where, I think, because if I click madly under the visible screen sometimes there is a reaction. This seems to be a problem of screen resolution. When the system starts, windows theme is distorted, as if the resolution was for a larger screen. I tried all the combinations of screen resolution, but it does not solve it.
Please help; It's totally destroy my pleasure to have this new machine!
Thank you very much
Satis
Hello
To be honest I n don't know which toolbar you are talking about. Maybe you can try to explain that she even more detailed.
Are you running the factory settings or you have installed another OS? In my opinion, you should try to reinstall the NB200 with factory settings. After that, you have a clean OS with all the drivers and tools of Toshiba. Everything should work well on the laptop again. :)
-
Satellite L650-1EQ - black screen and overheating problems
Hello
I have a problem with my laptop Satellite L650-1EQ.
A few days ago my laptop was overheated quite often.
I would like to start playing a video game and the computer could actually turn off after 10 minutes of playing it.I realized that this was getting serious so I stopped using my computer to play games and I decided that I need to clean it. However, I was looking for online on how to clean up my computer and then my screen turns white!
I didn't know what happened and was very scared.
I turned off the computer.The next day I turned on the computer to see if it was good, and the screen was black however the laptop power light comes on and I hear the vents work.
I turned on the computer and tried to start it again, and the computer started fine.
The image appeared and the problems disappeared.
But I knew that something bad was about to come so I took the laptop computer repair technician.I told her what happened.
He has used the vacuum to "clean" the dust of the computer and told me to go back if the computer kept a overheating.I restarted the computer again when I came home, and after an hour and a half the computer screen turns white but I don't think that it overheated. : s
I tried to start the computer and the screen is black, no picture, the only light on is the power one and I hear the vents work. I tried of transformed market but now it just stays as if it were now.
I tried on another computer for solutions such as the battery and pressing the power button for 2 minutes and other things, but nothing has worked. I don't know what to do so I decided to create a thread to get answers: s
Please help me, thank you!
PS: I'm sorry for my English, I know that's not the best
Hello
This does not sound very good boyfriend. I'm afraid that there could be some sort of dysfunction material Mr. something like the problems of graphics card or motherboard issue.
You can try plugging the external monitor to the laptop just to see if something would be visible on 2nd screen.
But if nothing will appear on the 2nd monitor, I think that the chip of the graphics card died :(Of course, this is just my personal opinion and a laptop computer technician must check the laptop to know what part of the laptop could be faulty.
-
Re: Satellite L675-10 t black screen after disassembly problem
Hi all
I recently had some problems with my L675-10T overheating, even when I was with a big fan of cooling for the games.
I realized that the problem resulted from blocked exhaust and dust and it is why, after reading and watching the many tutorials, I opened my laptop computer successfully and all cleaned up.
The temperature dropped to 20 c and I was happy.
The next night, however, took my laptop and headed for the living room, and it will stop.
Black screen and nothing passed. So I ran to the internet and found this solution, it worked btw.1. turn off your computer
2. unplug all wires (including energy)
3. disconnect the battery from the bottom of the computer.
4 re - connect the power cable. (the battery should not be in the computer)
5. turn power on. The screen works. Choose start windows normally. (if you get this screen)The thing is, the same thing happened to me this morning as well.
Twice in 2 days and im a little worried I did something wrong during Assembly of the laptop or something. Any ideas? Or do I keep accountant with the above solution?
Looks like a mess of power upwards of sorts.Thank you in advance.
Hello
I assume that this question has not happened before you have disassembled the laptop. Right?
To be honest this similar issue happened to me to. The portable light not (black screen) after I'm entered in the mode 'sleep'. However, this happened only onceIt s hard to tell why this happened to you it of not impossible that you have damaged something for disassembled the procedure.
However, the fact is that the warranty is not valid more because you opened the laptop. That is why any approach (especially parts replacement) to solve this problem would cost money.
So ultimately it s your decision: a technician visit to downtown to see the pieces of equipment or keep your stay with the workaround mentioned above.
Maybe you are looking for
-
I have opened the emails. they simply never open... They circle little continues to run but the mail does not open.
-
Route out of two blocks.
I just finished a race and the first part (1 mile or almost) is completely off. The brands of the blue line where I ran in fact! I did have problems like this before. Anyone know what happened?
-
I guess the first problem I have is that I came across this forum to get an answer to a question from windows 7, and all I can see are XP and Vista of questions and answers. It's great, but I have the update above installed on Vista (Ultimate x 64).
-
Cant' change search provider by default on this PC.
I can easily change the search engines on two other PC's, but not this one? He can block click to change? (I click on one TI is unconscious) Any suggestions please would be appreciated. Thank you! Mike E. like this!
-
WRT54G2 v1 - Internet is slow wireless AND WIRED
OK, so I get my internet to an ethernet cable plugged into the wall (I don't know if its cable or dsl because I live in an apartment). When I connect from the wall to my Macbook internet is fast with Mbit/s to 30. But, when I connect to my router eth