SG - 500 - OID SNMP to lower the CPU load?

Similar Questions

• Satellite L50 - B fan works even if the CPU load is very low

  I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
  I ordered the video card driver and the system tells methat driver is updated to the latest version.
  I don't know what I can do to change this sad situation.
  Please, please, could you help me solve the problem?
  Thank you very much for your support and understanding.
  I await your quick response.
  Thank you.
  Giovanni Spina

  What CPU temp? Probably overheating?
  Try to replace the thermal interface on the CPU. ;-)

• get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  get error when you try to lower the java load error 1-4 of 4 0 x 80070643.

  This forum is for Microsoft Security Essentials.

  You question is with Oracle Java.

  It is recommended to go to www.oracle.com to get help.

• OID need to run SNMP queries for the CPU usage, etc. in Win XP

  Hello

  I am unable to get the details (CPU Util, Util Swap) of windows using SNMP (SNMP4j.jar) machine. The SNMP service is running on the Windows XP system target. Where can I find the correct OID for windows XP to retrieve these settings?

  Join the code below:

  Import org.snmp4j.CommunityTarget;
  Import org.snmp4j.PDU;
  Import org.snmp4j.Snmp;
  Import org.snmp4j.event.ResponseEvent;
  Import org.snmp4j.mp.SnmpConstants;
  Import org.snmp4j.smi.OID;
  Import org.snmp4j.smi.OctetString;
  Import org.snmp4j.smi.UdpAddress;
  Import org.snmp4j.smi.VariableBinding;
  Import org.snmp4j.transport.DefaultUdpTransportMapping;

  Configure the Snmp object
  private Snmp snmp = null;
  private UdpAddress targetAddress = null;
  private CommunityTarget target = null;
  ResponseEvent responseEvent = null;

  targetAddress = new UdpAddress (10.101.210.127 + ' /' + 161);

  target = new CommunityTarget();
  target.setCommunity (new OctetString ("public"));
  target.setAddress (targetAddress);
  target.setRetries (2);
  target.setTimeout (60000);
  target.setVersion (SnmpConstants.version2c);
         
  SNMP = Snmp new (new DefaultUdpTransportMapping());
              
         
  SNMP. Listen();

  CPU usage code
     
  Command PDU = new PDU();
  command.setType (PDU. (GET);
  Command.Add (new VariableBinding (new OID(".1.3.6.1.2.1.25.2.3.1.4"))); / / percentage of CPU Idle time//.1.3.6.1.4.1.311.1.7.3.1.6.0
  try {}
  responseEvent = snmp.send (command, target);//.1.3.6.1.4.1.2021.11.11.0
  } catch (Exception e) {}
  System.out.println ("Exception:" + e); e.printStackTrace ();
  }
  If (responseEvent.getResponse () == null) {}
  request timed out
  Returns a null value.
  } else {}
  Response PDU dump
  PDU pdu = (responseEvent.getResponse ());
  Output vector = new Vector();
  Output = pdu.getVariableBindings ();
  int val1 = 0;
  Double CPUMemUtil = 0;
  Dim str As String = null;
  Str = Output.get (0) m:System.NET.SocketAddress.ToString ();
  String [] Spstr = str.split("=");
  Spstr [1] = Spstr [1] .trim ();
  try {}
  val1 = Integer.parseInt(Spstr[1]);
  } catch (Exception e) {}
  System.out.println ("An Exception occurred" + e); e.printStackTrace ();
  }
  CPUMemUtil = (100 - val1);
  String OutputMemUtil = Double.toString (CPUMemUtil);
  System.out.println ("CPU usage" + OutputMemUtil);

  Thanks in advance,

  Souto

  Hello

  Questions like these are much better handled in the TechNet IT Pro Forums.

  My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Correlation between the cpu load and the queue

  We are seeing cases where our CPU usage is less than 50%, but we babysit run queues of more than 10 minutes. I expect a large queue if we were see a greater use of the CPU, but I'm unable to correlate a large queue with low CPU usage. Has anyone else seen a condition like this or have any ideas. Database is 11g RAC Exadata X 2 full rack. We use the ORM to manage the resources of the processor as well.

  It is an informative read: http://shallahamer-orapub.blogspot.com/2010/07/os-cpu-run-queue-not-what-it-appears.html

• G505s slow down the speed of the CPU load while.

  It's terrible using CPUz, I see that, while the laptop is in charge, the clock speed down to 900 mhz and fluctautes between this and 1400 mhz, it's shocking, I can hardly Watch youtube videos or even post this thread, the LAG and slow is unbearable. When running on battery power, the speed of the CPU pulls up to 2500 mhz and stays there, it never seems to go to turbo speed either. Lenovo please fix this as soon as you can, while charging, the laptop is unusabe, I can't do anything on this subject.

  THIS DIFFICULTY PLEASE!

  
  

• I need to display the CPU load of the controller under Veristand real-time on a copycat.

  But one did not find a canal system (or equivalent) with these data.

  I have a controller with 8 processor cores (RMC8355), so I need to have the CPU 8 charges.

  Does anyone have a solution?

  Thank you

  The custom device available on the addons page System Monitor will allow you to get this information and much more than the tracks in your system definition.

  

• Question about the CPU load and memory...

  Hello. I'm a South Korea network engineer.

  I am facing a problem with the DMP 4400.

  I made a web page to publish the DMP 4400, but she loading has been so slow.

  I don't know why it slows down, but it may be because of the memory or cpu.

  So, I need to check the CPU and the memory usage...

  is there anyone know control order CPU and memory?

  I searched documents and web site include Cisco, but I couldn't know.

  Jinsung salvation,

  This should give you the amount of memory on the device:

  https://:@:7777/get_param?p=sinfo.memory
  

  It should I think give you the CPU:

  https://:@:7777/get_param?p=sinfo.load
  

  Kind regards

  Nicolas

• SVCHOST eats RAM and the CPU load

  Greetings! I have problems with this thing. Svchost, I did a lot of research and it is not fixed...
  It is somehow overloading CPU to 100% and eats RAM. If I kill the process that's somehow affects the sound and the windows theme, it makes them bounce like classic Windows. I really want to re install Windows, I am currently using Windows XP. While I play WoW, and I get massive lag. I check the Task Manager and I see that SVCHOST is the higher usage of memory and cpu. It goes like 600 000 K + and if I do not cancel the process computer slows down as turtle.

  Any ideas how to solve this problem? Please be specific, I can't find good resource for this cataclysmic problem :/

  Thank you!

  Svchost.exe is an application used by various applications. Usually, the problem isn't with svchost.exe but with the application that is running the service that is using svchost.exe. At any time, you can have a number any process ongoing svchost.exe to run and you have to identify who it is that is causing the problem. The process PID number is no help as it changes from one computer to another and each time that you start the computer. The constants are the command line and there are about 10 commonly used. You can't see them using the Task Manager. You need Process Explorer (freeware from Microsoft).
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653

  You will see what copy of svchost.exe is more active, and if you right click on the process, you will see a list of services that use this particular process. Svchost.exe - k netsvc is an example of a command line. Uses a number of services and often causing the problems of this group is wuaserv, which relates to Windows Update. Once you have identified the service that you have to identify the application using the service. In the example I gave, it's pretty obvious, but others are not so easy to determine.

• setInterval - CPU loading problem

  I have a Flash application to completion, I am about to enter its first pilot site - then do the test alpha with a few members of the family...
  
  Everything works fine but my son tests threw upward a CPU loadind weird question - I'll try to explain...
  
  In the part of my Ap I use lineto to draw shapes on the screen with sets of coordinates, pre loaded into tables. I charge setInterval with a different millisecond value to change the speed of drawing of such forms and then whenever it is called, he picks up a new coordinate in the table and the lines to that. Once an incremented counter reaches the end of the table, I erase the current setInterval and pick up a new set of coords and begine. Each set of coords is about 100 pairs of value to ._x, ._y
  
  The issue is that on long distances, more than 5 or 6 sets of coordinates, with values of low millisecond in setInterval (say 10-15) the CPU loading people gets more along the sequence, effectively limiting the animation once the download on the CPU gets higher than 80%
  
  In my eyes - the effort to draw the shape 8 in a sequence must be the same as that necessary to attract the first - but is clearly not what happens in practice, I also checked CPU loading with the highest values of millisecond by slower speeds - and here also the CPU load increases, but not as dramatically.
  
  Memory usage doesn't just increase CPU are so clearly there thing being left running - all pointers to where I should look at to solve this, would be very welcome...
  
  TIA
  
  Nigel

  Guys - I just put a clooge in my code to break down 10 movieclips instead of a big easy coz a drawing - I already had movieclips on the stage in places - right and on my DELL 5 year, the animation runs at a constant speed and is never above 8% CPU load!

  So I call it fixed - well, when I sort out all the other consiquences of change - might even be able to get out in the garden on Sunday now!

  Thanks for poking me in the right direction

  Nigel

• COM Bluetooth port 90-100% CPU load

  I ' am running a PC application via a COM port normal, nothing complicated 38 kbaud. The CPU load is about 4%.
  Then I try to do without this thread, that oops the CPU rises to 96% of the load.

  I use a different computer manufacturers with Toshiba stack and module internal BT. Win XP SP2. Yes I have updated to the last stack of Toshiba.

  The same problem on my second computer (since it is a dual core I get 50% CPU) also with Toshiba stack.

  If use an external RS232 Bluetooth adapter everythings works fine at 4% of CPU load. I have however to connect a USB Bluetooth, same problem 96% CPU adapter.

  I'm doing something obviously wrong?

  / B

  Each laptop manufacturer typically feature test prior to the distribution of laptops. Have you tried to know what say the support from the manufacturer of this problem?

  I use for Toshiba laptop and BT works well and something like that doesn't happen to me.

• VI causes CPU load after several days of running

  Hello

  I have a strange problem. I have craeted a control test VI bench and it runs on five computers, five test of control systems. All PCs have almost the same hardware, same card mother, same processor, etc.

  Normally the CPU load is around 50% when I run the VI, but to a PC, CPU load goes up to 85% after several days (maybe a week) market continues and the PC is almost tied up - VI execution becomes very slow (10 times slower) and the mouse moves only very slowly.

  I have first thought that the PC has a problem, but the problem disappears as soon as I stop and restart the VI!

  I don't even have to put an end to LabVIEW - only my VI and then all is well again.

  The problem does not occur in the other four PC, but I can't say for sure.

  The Task Manager indicates that LabVIEW causes CPU - use swap file load is small.

  Is it possible to analyse the causes of high CPU load?

  I use LabVIEW 7.1 Professional

  Operating system: Win XP (SP 2 or 3 that I can't remember)

  P.S. I have no loops without waiting-functions.

  johanneshoer wrote:

  ...

  the PC where the problem is occurring only 2 x 512 GB RAM, others have 2 x 1 GB. Maybe I have the upgrade of RAM would be my first action...

  ...

  Assuming that it's a typo problem, is you have run out of memory physics and are returning to the virtual (which is 1000 X) slower than real memory.

  Christian has nailed.

  Ben

• Strange behavior of "RT Get CPU Loads.vi"; first call lasts a very long time!

  I spent a considerable time of debugging a new application, after that we decided to migrate to the new architecture. When a more common coding errors where eliminated, the application started running smoothly for short periods before suddenly freezing until the moment where the connection to the target RT has been lost.

  I finally understood as a Subvi, which returns the data to the system (use of memory, the cpu load, etc.) lasted if long run than the queue to feed this consumer loop filled with tasks causing eventually the memory fills. I have done some testing of the Subvi separately and noticed that "CPU Get RT Loads.vi" takes forever to run the first time, it is called after a target restart and then quickly runs during subsequent calls.

  Is this known behaviour? Other ways to solve this, except 'RT Get CPU Loads.vi' call during initialization?

  The VI has an entry "session in? If she uses the system of screw configuration, he may have to create a session on the first call you can do outside of your loop. If not and you have installed system configuration tool, you can try to use the nodes property to get the CPU - in more recent versions of RT, I think that the function you are using is obsolete.

  Can you post a snippet of your code / the VI?

• [MSD] High CPU load of Java

  Hello

  One of my colleagues has a problem with the CPU load high caused by the process of java under the wrapper, it uses the latest version of TMS 13.2.2 with TMSPE, the server running Server 2008 R2 Enterprise, 4 GB RAM, 64-bit java (9) was last updated was applied, to no avail.

  The process of java on my TMS system runs at 0.54% avg, the only difference I see is the amount of RAM, its user base is tiny (80 users).

  Any suggestions on what he can try to diagnose the problem?

  

  Hi you use findme?

  You can check if the address of the video template is the same as the address of device model?

  In the diagnostics of tmspe can also see if the importation of the aircraft has a work «»
  Circle on it as his performs a constant import?

  If you do not use findme, disable it on tms tmspe settings and restart the tmspe service. The cpu is now stable?

  / Magnus

  Sent by Cisco Support technique iPhone App

• 100% high CPU load and memory usage

  Hi all

  My company bought a new appliance IPS 4510 and after initial installation, I see that the CPU load and memory is 100%. The device is not in a production network. Is this normal or there is a hardware problem? Enjoy a Counselor about it.

  Concerning

  Christine

  Hi Damien,.

  It is actually normal behavior for an IPS sensor.

  To measure the actual load of an IPS sensor, you will want to monitor the "percentage load treatment" of the analytical engine that processes all inspection processing for the sensor.

  You can view these statistics by using the command 'display the scan statistics-engine '.

  Also, the sensor running version 7.0000 E4 5,0000 E4 (or later version), you can check the load percentage value Inspection displayed by the command "Display inspection-load" in its place.

  Hope that answers your query.

  Cyril Shankar