Share printing over a network of residential group

Similar Questions

• LaserJet P2055DN - do not print over the network

  Configure the printer last night as a network printer (which replaces a former 2300dn LJ). It would not print a test page. To verify that the printer was good, I have loaded the drivers on my laptop and connected via usb.  Was able to print a page of test via USB.  Disconnected usb and reconnected power cable. Released and reset the ip address.  Verified the ip address in scathing of the host.   When I ping the printer I usually lose half of the packages.  There are two other HP printers on the network, a P2015dn and a color 2605dn LJ. Ping their IP back to 100% with a ttl = 255. Ping the p2055 produced 4 packets sent, 2 packets received, 2 lost packets, ttl = 64 2 returns.  I changed the printer cables and exchanged the network switch ports (verified the network switch ports by printing to the LJ 2605) with the same result. I can't get the internal web server to mount, or it partially displays or combinations of these.  If this was the old style removable print server as in my lj2300, I could swap out, but it's not like I can do with this model.  When I send a test page to the printer, it displays "printing", the green light on top flashes, the activity on the network card light flashes, but nothing happens. Finally, I get a «this document failed to print "notification on the host, but the printer still says 'printing' and the lights are still flashing.»  Anyone have any ideas?  I think I'm looking at a bad network/print the server maps in the P2055.

  I also had problems printing over the network to the hp p2055dn. There was no problem via USB printing. All the network settings were ok. Can ping, etc...

  Number of days of bickering, finally found that the Config.Security Network should be reset on the physical control of the printer Panel.

  Press Ok on the Control Panel printer--> press down arrow, you get to Setup Menu Network Config--> press Ok--> a number of arrows down you get to Config network. Security--> press Ok--> you have two options - keep or reset--> choose Reset... Network printing should work fine.

• HP 2520HC: install the software of the printer over the network

  Hello

  I use the HP 2520HC series at the office. I use a network connection.

  Printing works fine, however I want to be able to scan as well. I downloaded the printing software, but the only option I choose, connect via USB? The printer is connected to another PC, so this isn't an option.

  Please help me.

  Hello

  such a USB printer allow only all features on a directly connected USB computer.

  Sharing a printer over the network allows sharing of a printer, Windows don't offer any scanner, the sharing feature.

  You can print from another PC to a shared printer, you will not be able to analyze such, to analyze the use of the computer connected directly to your printer via a USB port.

  Kind regards

  Shlomi

• Need help Kodak 5500 AiO printer over the network.

  I have a kodak 5500 AiO printer. I have vista on all my computers (1 bureau and 3 laptops). I downloaded the sp2 for vista on all computers, after I downloaded sp2 desktop mouse and keyboard froze, I had to uninstall sp2 to make it work. Now the printer on my home network to print or not be discovered by my laptop. I can see the printer on the network to my laptop but I can't connect to it. The printer is on the desktop via a usb cable. I deleted the printer drivers and reinstalled and downloaded the software and drivers for the latest printer.  I need help.

  Thank you

  Phil

  original title: using network printer

  Everyone,

  That's what I had to do to get my printer working once Vista it has messed up. You do the first two steps on the computer to which the printer is connected. The last step that you do for your laptop or you want to connect the printer to the main computer. I hope this helps.

  Hey all,.

  We had this same problem...

  We had to follow the procedure proposed by Drompa...

  > 1) share permissions
  >> 1. In explorer, select C:\windows\system32\spool\PRINTERS
  >> 2. Make a right click, properties
  >> 3. Tab sharing
  >> 4. Advanced sharing
  >> 5. Check "share this folder".
  >> 6. Permissions
  >> 7. Grant everyone full control
  >>
  (> NTFS permissions 2)
  >> 1. In explorer, select C:\windows\system32\spool\printers
  >> 2. Make a right click, properties
  >> 3. Security tab
  >> 4. Edit
  >> 5. Add
  >> 6. Advanced
  >> 7. Find now
  >> 8. Select 'NETWORK '.
  >> 9. Ok
  > 10. Total control of the NETWORK grant

  AND THEN we had to install local printers, using the port trick...

  1. go to 'printers '.
  2. click on "add a printer".
  3 Add a local printer.
  4. "create a new Port.
  5. use the "Local Port" option
  6. on "Enter a Port name" enter: "\\Computername\Printername".

  And if all goes well should do!

  Good luck!

  Credit to Drompa and otherdreams to help out me.

  Phil

• Share printer on 2 network segments

  I use HP8600 with Motorola 6580.  There are two network segments:

  Network of comments begins 192.168.1.x

  Primary network is 192.168.0.x

  HP printer is 192.168.1.x, but cannot be used by the primary network.

  Is - it possible to share the printer on the two segments?

  Not going not to happen.  You need to connect the printer to your network, not the comments.  Get the network of 192.168.0.x.

  Some routers allow you to connect the network invited to your primary network, so you can plug these devices... except Linksys.

• Computer will not connect to the printer over the network. How can I configure the fax as well?

  I'm new here and just beyond frustrated trying to get this to work for my office.

  My other printer works by USB because my computer give me a warning throughout the day that the USB is corrupted. Anyway, I got a new printer and I am trying to connect through the network. My iPhone prints through it. My computer OS is Windows 7 64 bit.

  My printer is HP Officejet Pro 8600 all-in-one

  I want to connect from the network, and I want to set up the fax. My phone does not work when I plug the line in the printer then phone ext line into my phone.

  I'm confused! Help someone! Please, I beg you!

  Hi ahagereo,

  To connect the printer to your network, follow the steps outlined in the document below.

  http://support.HP.com/us-en/document/c02886889

  Fax: Make sure you have the telephone line connected to the port of line 1 to the back of the printer.

• documents of fact pending does not print when printing over the network

  Hello!
  Everyone! I have a problem, my printer don't Tróchez not print when I tried to print a copy using network.
  When I tried to print via USB cable, it works well.
  I don't understand how this problem can be solved.
  Kindly help me.
   
  Printer model: HP LaserJet M1120n MFP

  Hello

  Looks like the printer is not on the network or the ip address may have changed

  Please download and run the doctor for impression scanning HP, it will identify and solve the problem...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=IM-120773-1&cc=us&DLC=en&LC=en&OS=4062&product=3447598&sw_lang=

  or you may need to reconfigure the printer to the network and to reinstall the printer drivers on the computer...

  Although I am an employee of HP, I speak for myself and not for HP.

  * Say thank you by clicking on the "Bravo!" Star"located on the left *.
  Make it easier for others to find solutions, marking my answer to "Accept as Solution" if it solves your problem.

• surface rt will not share files over the network from the home group

  I added my surface that RT to my network, but is does not share files or a printer

  You cannot access the files or devices on the Surface RT of the network see only compared to the systems default RT.

  There are workarounds, but as one provided is by design.

• Impossible to install a printer over a network; requires a driver must be installed.

  Recently I got problem with my printer, so I removed and have reinstalled the software. The printer is now works great on the host computer network.

  I have a home network and I want to share a computer, I already checked the box on the properties of the printer for printer sharing. I wanted to add my printer to another computer through the network from my computer, but it would not allow me. I tried to change the permission settings, but it doesn't are not all the parameters or tabs in printer properties that allow me to change anything either, so I went straight to the other computer and he DID I would add a computer on the network, but after I selected the printer to add and clicked on OK another message appeared and he said that my computer does not have the correct driver. INF installed and he asked me to look it up.

  I'm stuck because since this is a computer on the network and not the host computer that can have the file, I don't know how to access my computer through another computer on the network, and I do not know which file is in application or how to find it.

  * Thanks in advance for reading and using, any idea, advice and assistance are greatly appreciated! :)

  Host Info:

  Windows XP Media Center Edition 2005 SP2

  Computer info network (one that I am trying to install the printer on):

  Windows XP Home Edition SP2

  News of the printer:

  HP Photosmart C4180 all-in-one

  I go to the HP website and just download the right driver from there.  It will probably be the simplest solution.

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Cannot print over a network with Vista home

  Hello I try to connecto my new laptop to my network wireless of office to share files and printers.  The new laptop is Vista Home 64 bit.  The printer is connectet to a PC with Windows xp and according to a person who does our netwirking the printer cannot talk to the 32-bit and 64-bit and tells me that I have to change for windows XP.  It does not sound right.  Apparently there is no driver for canon iR 1510-1670, which runs on a 64-bit processor.  Any help...

  Thank you

  Guillermo

  If there is no Vista 64-bit drivers available for this Canon printer, you will need to spend the XP Canon printer to a compatible printer Vista 64 bit if you want to print from it.

  Canon has written drivers for their products, not Microsoft.

  Check yourself on the Canon Website driver as to what drivers are available for this printer:

  http://www.USA.Canon.com/OPD/controller?Act=OPDDownloadIndexAct

  See you soon.

  Mick Murphy - Microsoft partner

• OfficeJet 4500 G510n-z: HP Office Jet 4500 G510n-z fails to print over wireless network

  Hello

  Earlier my XP (Dell D620) machine stopped printing wireless with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly without any problem. I have download the current HP drivers without result. I looked at other positions, but none of the viable solutions. The 4500 G510n-z appears as a printer, but all print jobs end with an error. I can't print a test page, Notepad, etc. All jobs appear on the queue, but they all error. It seems to be a specific problem of the XP. I have XP pro version 2002 Service pack 3. My network is just a Verizon Fios wireless router. In windows 7, I can see the actual address of the Hp wireless connection when the printer is added. Under Xp I do not see the address wireless when I try to add the printer. Now, it appears in the list of printers on XP but 7 seems to see the actual address wireless and allows me to select it to add the printer. I plugged the XP machine to the printer and it would work for a while then stops working. Don't know what triggers the loss of connection. How can I specify the connection 4500 G510n-z XP? I tried to add the IP address I see on my 7 machine but XP wants to a path of the server which is //server etc., UNC path.

  I went in the properties of the printer and changed the address to match the 7 IP 192.168.1.3 192.168.1.9 Windows 7 XP, but not go again.

  Thank you

  Al

  Hello @adb1779,

  Thanks for getting back to me on this subject. Because the ping tests on both computers is successful when communicating with your wireless printer, it turns out that you do not encounter a network issue at all. On the contrary, there is either a program of 'blocking' of printing wirelessly on your XP computer or computer XP is not "like" the fact that you have changed the IP address of 192.168.1.3 to 192.168.1.9. It would seem that your XP computer is a former connection with the printer. To resolve this problem, please follow the steps below.

  Step 1: Launch MSCONFIG:

  I'll have you temporarily disable all programs background on your XP system to see if there is a program that runs in the background on your Windows XP computer that would block communication with your printer.

  1. Click on the Start menu
  2. Click run. In the Run dialog box, type msconfig and click OK
  3. When the System Configuration window opens select 'Selective Startup ' and uncheck load startup items
  4. Click the Services tab, check the box at the bottom to hide all Microsoft Services
  5. Select disable all
  6. Select apply and OK
  7. Computer restart when prompted

  When your Windows XP computer turns please try printing. If the printer works correctly now it would mean that a program was blocking the communication. If the problem persists, proceed to the steps below.

  Step 2: Uninstall the drivers:

  I understand that you have already done this in the past without result. However, if your product is identified as on 192.168.1.3 she is not installed correctly, or an earlier version of the printer with an old IP isn't be properly removed from the system. It is crucial for the repairs we have a clean slate to work with. Please follow the steps below.

  1. Click on the Start menu
  2. Click on programs
  3. Select the HP folder
  4. Select your HP Officejet
  5. Select Uninstall
  6. Please follow the instructions on the screen to complete the uninstallation.

  Once the uninstall is complete, proceed to the next step.

  Step 3: Clear the server properties:

  Your printer driver can also be installed under the print server properties. I'll have to make sure your driver has been completely removed from both print server.

  1. click on the Start menu

  2. Select Printers. You may need to go to the Control Panel then Printers and faxes.

  3. in printers and faxes click on file and select Server properties

  4. in the print server properties window, select the drivers tab

  5. If your HP Officejet is listed, click on it and select Remove downstairs.

  6. a new window opens, click on Remove only the driver. Click OK.

  

  7. Select apply and then OK in the print server properties window.

  8. close printers and fax machines.

  Step 4: Delete the temporary files:

  1. Click on the start menu
  2. Select run. In the Run dialog box, type %temp% , and then click OK
  3. Click on the Start menu
  4. When the Temp folder opens, Select the first item in the Temp folder and tap the SHIFT key on your keyboard.  Now Shift while, scroll down a few lines and click on another element in the file. What is between these two elements will highlight.
  5. Select the "delete" button on your keyboard. The Temp folder contains the temporary internet files. None of the actual files or folders on your computer will be affected by deleting Temp files. If a Temp file be used yet that you will automatically get the pop-up that you can't delete this item. The "deletion" process is cancelled. On Windows Vista, 7 and 8 of Windows you can just "jump" from the items which will not delete. Unfortunately, on Windows XP, it is not so easy. Take note of this point is unable to delete. Then, ignore this element. Click on the next element in the list, hold the SHIFT key and click another item in the list to remove another piece of elements. You will continue this tedious step until all items in the Temp folder which will remove are deleted.
  6. Close the Temp folder when it is empty
  7. Right-click the recycling bin on your desktop and select empty recycling bin

  Step 5: Reinstall the drivers:

  1. Please click here to download the drivers for your printer
  2. Once the site opens click on the download button at the top left
  3. Once the download is complete, follow the instructions on the screen to reinstall your printer wireless
  4. Once your printer is properly reinstalled please try again to print wireless.

  Please reply to this message with the result of your troubleshooting. Good luck!

• Cannot print over wireless network

  Title: PRINTER

  Wi - fi printer starts to print and stops every time 5%.

  Hi C3JVC,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not print on a Wifi network. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. what version of Windows you are using (Windows XP, Vista, 7)?

  2 did you change on your computer before the show?

  3. What is the number of brand and model of your printer?

  4. you receive a specific error message/code when printing fails?

  Please follow the steps mentioned below:

  Method 1:

  Start the computer in clean boot in order to check whether a third-party program is causing the problem. Clean boot helps eliminate software conflicts. The article below describes how to solve problems in Windows 7 by performing a clean boot. This article also describes how to start the Windows Installer service and how to reset the computer so that it starts as usual. To configure your computer to clean boot see the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 in the article to start on normal startup.

  Method 2:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  For reference:

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  If please perform all of the recommended steps and view items of reference and if after following the question of measures has not changed it please get back to us and we will be happy to provide you with additional options available that you can use to get this problem is resolved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• Share printer on both networks

  I have a Home Office with a network served by a Linksys BEFSR41 wired router. It includes a laptop and HP printer... This router connects also to my cable modem for internet access. I also have a second linksys wireless router E1000 wired to the router of the headquarters. It serves as my wife's laptop in the kitchen and also a ROKU in the den. I tried to use the router for any home wireless, but the signal is too weak and too unreliable. With the current provision, I get a strong signal of the entire House and my home office using the wired router... My problem is that I can't access the printer in my home office. Does anyone have a solution?

  Set up the E1000 as an access point only. Change the LAN IP address to match your subnet LAN BEF. If your BEF uses 192.168.1.1 that the E1000 can be set to 192.168.1.2. Disable the DHCP server on the E1000. Wire one of the LAN ports of the E1000 to your BEF.

  Now you have a local network, and you shouldn't have a problem to find your printers...

• Canon MX860 will print over wireless network but don't scan (W7 OS)

  I have two laptops with XP and one with Windows 7 64 bit. Both connected to a router Wireless Linksys - internet connections well, feel very good on the two machines. The XP laptop will scan the network, but the Windows 7 laptop gets a dialog box of Scangear with this message: cannot communicate with scanner, for these reasons scanner is turned off scanner is disconnected. Have uninstalled and reinstalled all the software and drivers (with firewall disabled according to the instructions of canons), loads software successfully - but still no luck with the network scanning. Also downloaded Scangear tool - but when he's looking for the network printer, it does not. Support of Cannon says now there's an incompatibility with W7 and Microsoft can only solve the problem. Also noticed that the Canon IJ Network tool is loaded, but it does not work on W7 - new OK on the XP machine machine. Would appreciate any suggestions.

  Thank you

  John W

  If Canon say its not compatible with win7 is something for Canon to fix and not Ms

  Probably that you have installed drivers updated from the Canon site

• How to connect a Windows 7 pc to a Business Inkjet 2800 printer over the network.

  We change Windows XP proffessional x 86 to 7 x 64 Enterprise, and our printers, Business Inkjet 2800 (3 of them) is part of our network. I understand that no drivers are available, so my question is how do we install them? If it's a driver OS, which one is it?

  It seems that your printer is a commercial product.

  You can get a better response by posting in the trade forums.

  http://h30499.www3.HP.com/T5/printers-DeskJet/BD-p/BSC-415#.UGThUE3A9-c