Signature LUN after replacement of the RAID controller

Similar Questions

• Install the raid controller during the installation of ESXi5

  Hello

  Today, we plan to install ESXi5 on our server.

  We had no problems during the installation of ESX4.1 as he ask custom drivers when it starts.

  But ESXi5.0.0 does not ask for the installation of the custom driver and we cannot install raid controller driver!

  I do not know how to resolve this so I wanted to know is possible to install the raid controller?

  Thanks in advance.

  I know I ask too many questions, but I know a little bit about it.

  No problem, that's what the forum is done

  Now should after you download the Image how I use it?

  Burn the image to a CD and run the installation from the bootable CD. Remember, though, that the image is usable only for new installations, not for upgrades (see release notes).

  André

• Satellite P755 - 11G: Win 7 64 bit - cannot activate BT after replacement of the module

  Hello

  On my laptop Satellite P755, I had to replace the Wifi/Bluetooth PCI Express Mini card because the original Atheros was broken and was no longer working.

  So I decided to buy a new Intel® Wireless-Dualband-AC 7260 card to replace.
  Has successfully replaced by itself.
  WiFi now works again.

  Now, I'm dealing to get BT running. With the old Atheros card I could activate BT by pressing FN + F8 and choose Bluetooth from the menu of flashcard on top of the screen.

  After the replacement of the F8 full option in flash cards had disappeared.
  I managed to solve the problem for the WiFi by adding the ID of the new material of the card Intel (PCI VEN_8086 & DEV_08B1 & SUBSYS_40708086) in the registry in the following locations:

  HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\ConfigFree--> InternalDevice176
  Hotkey HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\Wireless--> DevID_SupportRL175
  HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\WirelessAPL\BT WLANDP--> DevID_SupportRL176
  HKEY_LOCAL_MACHINE\SOFTWARE\TOSHIBA\WirelessDevice ID--> DevID_SupportRL176

  Now FN + F8 works very well for the WiFi, flash cards menu appeared again.
  But there is still no option to activate Bluetooth.

  Addition of the BT hardware in the registry (same locations as the WiFI) ID does not help.
  I can't get the point how the flash cards software manages to activate the bluetooth normally.

  Does anyone have an idea what it takes to get the Bluetooth in the menu flash cards?

  My system:
  Toshiba P755 - 11G
  Windows 7 64 bit

  See you soon,.
  Alex

  Hello

  You said that the original WLan module was to Atheros.
  As far as I know the module Atheros WLan additional needs for the installation of the filter for the Atheros BT driver package in order to use and activate Bluetooth.

  In the case of modules WLan Intel such package of filter is not necessary.

  I guess the Atheros BT filter driver package is always installed on this laptop and I think this might be the reason why the BT can not be activated properly.

  However, I recommend you to uninstall the filter BT mentioned driver package as well as Toshiba BT stack, driver Atheros WLan and the Toshiba value added package, and the Flash Cards Support utility. Clean the system using the CCleaner tool.

  Then install the Intel driver that would control the new Intel WLan card.
  Install the Toshiba BT stack and restart the device. Now follow with the installation of the Toshiba added value package and the Flash Cards Support utility. Reboot once again and check if you can use FN + F8 to activate WiFi and BT

• ESX4i does not see the RAID controller card

  I install the ESX4 and the ESXi4. Considering that ESX sess card RAID controller, ESXi4 will not work. I was wondering if there was a solution to this?

  Memory I don't remember ESXi4 support adding additional drivers (unlike ESX4 Installer) but I was wondering if I climbed to U1 ESX4i, that would help. Or is just "not supported"?

  Concerning

  Mike Landry

  www.RTFM-Ed.co.uk

  My problem has been resolved by the way of the ESXi 4.0 to ESXi 4.0 Update 1... which includes a driver update...

  I managed to ESXi in order to run from a USB key on the servers, but found the previous day, and DPM mode did not work properley. While he was going to suspend the ESX box very well, the machine just and seems to lose its settings to boot PXE boot - regardless of what I did with the BIOS...

  I found ESX4i U1 to install on the physical disk is more reliable...

  Concerning

  Mike

• General on the raid controller and hardware

  Hello

  I have that the hard disk controller or controller raid (0,1,5) does not work on a computer, if I add hollow PCI slot a wil raid controller or hardware, computer, or the raid not works normally?

  Johan

  Hi Johan,.

  Thanks for posting on Microsoft Community Forums.

  Ideally it is dependent on the PCI slot you use, if the PCI slot supports the hard disk controllers and RAID controllers so it will work with the computer. Almost all modern PCI slots supports the hard disk controllers and RAID controllers.

  For more information on the operation of the devices and drivers on Windows 7, click on the link below.

  Windows 7: manage devices and drivers

  Feel free to write us if you have questions/queries when you work with Windows.

• Insertion/thanks to the RAID controller plug in PCIe card in a UCS C220 M3, rather than embeded RAID controller?

  Hello!!

  We have a UCS C220 M3 server with a 1 TB SAS hard drive and a controller RAID embeded, like this:

  1	UCS-HDD1TI2F212	1 TB SAS 7.2 K rpm 3.5 inch HDD/hot plug/disc horse sleigh
  1	UCSC-RAID-ROM15	Embedded SW RAID 0, 1, 10, 5, 4 SAS/SATA ports

  If I add this controller RAID PCI card to my UCS server:

  UCS-RAID-9266CV =

  MegaRAID 9266CV-8i w/TFM + Super CAP

  US $ 1,686.00

  Going to work with her, ignoring the old RAID embeded it configured?

  The question is that VMWARE is not supported controllers shipped my RAID, so I want to add an external RAID PCI controller to support VMWARE.

  I don't know if it will work.

  Thank you!!

  Rodrigo,

  The embeded controller is built and not removable, it is integrated into each C220/C240. The units are designed to operate with PCIe controllers and mezzanine table when it is properly configured.

  Once you install the controller of the SIPC, you will need to do the following:

  (1) move the conectors mini SAS to the motherboard in the LSI PCIe controller

  (2) make sure that the slot PCIe what optionrom is enabled in the BIOS. (newer systems have their OptionROM disabled in the uninhabited slots (from the factory). If you do not see the OptionROM for the POST, then go back into the BIOS and enable the slot PCIe OptionROM

  (3) while you are in the BIOS, you can thus turn off Patsburg UCS regulatory table (the table embeded). It is of no use at this stage that you removed the cables up to the HARD drive Bay. It is also misleading if left active, you will see the configuration of arrays of LSI utility appear twice during POST. Time for the embeded and once again for the PCIe LSI controller.

  Dave

• The RAID controller compatibility

  Hi I just bought a new system and intend to use a RAID controller to configure a RAID array.

  The controller that is available is ""Intel RS25DB080"." I've never done this before so to start I wanted to ask you how can I check if it is compatible with my x 99 Deluxe motherboard?

  (he did not appear on the page that mentions the compatible products: Specifications of RS25DB080 for the Intel® RAID controller)

  Secondly, it would be possible to set up several RAID arrays using a single controller? that is, if I want to do a table composed of 3 disks and another 3 more I have to buy an extra card?

  Also if this controller is not compatible what other controller I'll buy? And what exactly what I look for in a RAID controller if I'm looking for one? (Currently I just check to see if it's a SATA or SAS controller)

  So, basically, do not know much about the RAID needs your help, thank you!

  Generally if you are serious about RAID for the only real video editing solution is arec, because you will need 3 RAID or Raid 6.  There are a number of X 99 different systems with the Areca RAID card installed I am owner of a BOW 1883i, which works very well in my x 99 motherboard, I have it configured with 7 discs each RAID 3 Samsung 840 Pro I probably will be getting rid of it I can get nearly the same results with a SSD of unique m2.  In my old age, I went basic/simple rather than exotic.

• Installation of CentOS on Dell R720 after you disable the RAID

  Hello

  I have this R720 Server I want to install CentOS 6.3. It has two 256 GB partitions that have been previously configured as a RAID-1 volume. I removed it because we must not RAID and just need performance when it comes to disk read/write. However, the CentOS installer does not recognize two physical disks. But if I configure the RAID-0 drives the installation program recognizes the discs. I do for the installation program to recognize the physical disks? Thank you.

  Mary Carmen

  What RAID controller do you use?  I assumes that you use the H710 PERC, which does NOT support non-RAID, so in order for everything to be presented to the operating system, you will first need to configure it in RAID.  If you don't want to use RAID (even as a RAID 0 drive), then you will need get another controller.  PERC H310 supports non-RAID (the other controller for the R720 options make too, but they won't work on Linux).

• G10 Flash problem after replacement of the lens - ideas?

  
  

  Hi, I'm guessing that you don't have the service software, update of tables, box of collimator etc to recalibrate the system of lenses?

  When the camera takes pictures in what image?

  I doubt you have 2 bad lenses.

  You have the service manual? Platinum flash connects usually to DC power immediately the battery box, look in this area for a problem with a connector, you can have inverted one on both devices? I worked on a few models, G5 and the S5, but never on the Assembly of lenses because of all the special tools and software required. I was able to locate the service manuals for the ones I worked on the first. If you do not try and find maintenance manual.

  So my assumptions are you making the same mistake with the connectors on the PCB flash on or near the battery on both devices box or systems of lenses must be recalibrated is why you have this symptom "hunting".

  Also as a thought after you have the AC adapter, if so try using them and see if the flash works. If it works with that then your problem is most certainly in or around the battery box/cards PCB.

  Let me know what you find.

  John

• Help: Laserjet M1536dnf does not scan after replacement of the router

  Hello

  I have a LJ1536 that has worked well until I had to replace my network router after it failed. Now, I can print on both computers I have in the same local network, copy locally in the printer, but will not scan. The printer is connected to the router via an access point configured as client and connected to the printer wireless. After the failure this AP router had to be reconfigured to the new router.

  I tried scanning disabling firewall and anti-virus, delete and reinstall all software using the latest version on the web and nothing. FX HP Toolbox works very well. HP Print and doctor Scan did not help. WIA service is Started (auto mode) on the computers.

  I get the message on the two computers during an attempt of analysis:

  Inaccessible scanner

  Scanner communication cannot be established. If make sure that your product is powered, check the connection and make sure that your network is working properly. If these conditions are correct, restart the product and try to scan the image.

  If you are running a software firewall, it can block scan communication. Please visit www.hp.com/go/wirelessprinting for help to configure your firewall.

  Configuration:

  Windows 7 64-bit on both computers

  LF1536 FW dated 14/01/2013

  Any suggestion?

  Hi Jhenrichs,

  Thanks for the reply.  If the AP was configured to router manufacturer's specifications, it should allow a communication as it did with the previous configuration.  Check the below settings that may fix the problem.

  The AP settings:

  1. make sure that port forwarding is disabled

  2 disable DHCP (this should only be enabled on real router), it can be set to automatic or static, but disable DHCP on the access point

  I hope this helps!

• No bar of tasks or cursor after replacement of the HD and install Win 7

  After a hard drive failure, I replaced the drive and installed Windows 7.

  After that Windows Update Setup, I don't have a taskbar, start button or the cursor of the mouse.

  I have only access to the desktop in safe mode. Any help is appreciated.

  Rob

  What exactly was the disc that you used to install Windows 7?

  Have you tried to format the drive and reinstall Windows 7?

• 405 proDesk G2: how to activate Windows after replacement of the motherboard

  I upgraded my G2 405 ProDesk to Windows Pro 10 of the original OEM Windows 7Pro earlier in the year.

  Last week, is not the motherboard.  The PC is still under warranty, so HP arranged for a replacement on place of the motherboard.  It worked well, except that windows is activated is no longer.  I called Microsoft with the installation ID in order to get a re-activity windows confirmation ID.  Microsoft said that I need the original license key.  I don't have that because it's an installation OEM from HP with, arguably, the key in the BIOS that has been replaced.

  So what I do now?  HP will issue me with a license key given that the PC is still under warranty?

  Just to clarify, the license was Windows 8.1 Pro downgraded to Windows 7 Pro, so there was a key Windows 8.1 on the original BIOS but the PC came with Windows 7.

  Your post got me thinking, however. I ran the FirmwareTablesView.exe application on the new motherboard and found a license key in the BIOS.  Then, I went to change the product in Settings\Update & security key and enter the key of the new BIOS.  Activation was then successful.

• MFP M175nw + Speedport W 724V (Telekom) - WIFI connection does not work after replacement of the router

  Hello community,
  
  My parents at home to replace their router with a newer model (Speedport W 724 V Telekom, German) due to an electrical fault.
  
  Until printing today via WIFI on the 100 HP LaserJet M175nw MFP color worked like a charm. But now, there is no link with the new router via WIFI and it is not possible to connect by using WPS (they really tried everything). Just connect and print via USB in Windows 7 works... But they need to print from iOS (iPad) devices.
  
  I went through the terrible (long) manual - to discover that it may be a problem with the WIFI (ad hoc/infrastructure) connection method. But my parents were not able to change this method.
  
  I would therefore ask you help on the following:
  -How can I change the method of connection and connect the printer using WPS?
  -How can I reset the printer completely (reset to default values)?
  -How to print the configuration menu? I googled and it said to push the Cancel button (X) for more than 5 seconds to print this page. Is this correct?
  -How to find out the IP address of the printer to access webadmin interface? I have now, there is a, because it is mentioned in a ubuntu forum: http://ubuntuforums.org/showthread.php?t=2193532
  - And finally: how to do a firmware update? It seems that there is a newer version available on that model and some said that connection problems could be resolved by upgrading the firmware.
  
  Please answer detailed possible, as I don't have much experience with Windows & PC in general.
  
  Thank you all for your support
  Dominik
  --

  Hi DominikBach ,

  Here is this document in German for you. At the bottom of the left side of the page, there is a drop down to select the language next to the country.

  The Druckers as ein kabelgebundenes oder ein Drahtlosnetzwerk einrichten.

  Thank you.

• Error 00ce after replacement of the Board of Directors

  Hi all

  We recently have a defective Board on a m93z, I had a technician who came to change the Board of Directors. After the passage of the motherboard, I got an alert from the bios telling me that the serial number and model are not valid in the bios. I ran an update of the bios of the exe on this site, but it did not work (os version).

  The tech told me that it was easy to change but at the moment, I have no idea what to do.

  should I use winphlash and how?

  Download the iso CD to update the BIOs of your machine. Burn this disc and boot the computer from it. During the update of the BIOs, gives you the opportunity to update the machine/model Type and serial number.

• Product key recovery Windows 8.1 AFTER replacement of the operating system

  Hello

  I was wondering if there is any way out of this pickle.

  I had problems with my pc (mainly the printer spooler errors) of a virus so I decided to do a system restore. Only problem was that I had the pc built for me and the person has used a downloaded Windows 8.1 version (no cd). When I went to restore the operating system he said I was "missing data". As I had no cd to I found a so-called work around where you use the missing data from one version of windows business to fill the gaps and it should allow me to restore the version I had (8.1 regular).

  Well low and behold, I load my windows and it is has been replaced by this...

  

  So I tried to reinstall Windows 8.1 using the ISO and the extraction of the key with Magic Jellybean, but, of course, the key had been crushed as well with this useless key.

  I called Microsoft to see if they could recover my OLD key that has written more because I was signing on my account when I logged in while I had my version 8.1 ordinary and download of updates. The people at the other end doesn't seem to understand what I was talking and kept transfer me different places when they are confused as to what I was asking (the language barrier I guess).

  ALL I NEED IS MY OLD RETURN KEY! If not hidden on my computer somewhere so how to get Microsoft to please look into this also. I even signed up for Windows 10 deployment on my 8.1 original.

  Thanks in advance

  Hello

  I was wondering if there is any way out of this pickle.

  I had problems with my pc (mainly the printer spooler errors) of a virus so I decided to do a system restore. Only problem was that I had the pc built for me and the person has used a downloaded Windows 8.1 version (no cd). When I went to restore the operating system he said I was "missing data". As I had no cd to I found a so-called work around where you use the missing data from one version of windows business to fill the gaps and it should allow me to restore the version I had (8.1 regular).

  Well low and behold, I load my windows and it is has been replaced by this...

  

  So I tried to reinstall Windows 8.1 using the ISO and the extraction of the key with Magic Jellybean, but, of course, the key had been crushed as well with this useless key.

  I called Microsoft to see if they could recover my OLD key that has written more because I was signing on my account when I logged in while I had my version 8.1 ordinary and download of updates. The people at the other end doesn't seem to understand what I was talking and kept transfer me different places when they are confused as to what I was asking (the language barrier I guess).

  ALL I NEED IS MY OLD RETURN KEY! If not hidden on my computer somewhere so how to get Microsoft to please look into this also. I even signed up for Windows 10 deployment on my 8.1 original.

  Thanks in advance

  Hello

  Ask the person who has built your computer and installed Windows 8.1 where they have bought and what they were doing with the product key.

  See you soon.