Size of the folder of the remote computer

Similar Questions

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Windows 8 on Vmware discovers 'the connection to the remote computer has ended. "

  Hello world

  I have problems connecting with VMware view
  I installed windows 7 and tested fine. But Windows8 x 64 is not allowed.

  The virtual machine is available on the server of the view state. pls see attached snapshot. When I try to connect to via the customer discovers my session disconnects after a few seconds with a warning "the end of the connection to the remote computer.

  When I check the console vcenter process, it seems that the user connects with no problems. But customer does not display anything and disconnects.

  what I've done so far:
  -Tried both RDP and PcOIP connections
  -Removed and reinstalled the client
  -Remove the agent from the view and reinstall client
  -Server view rebooted
  -There is no open Firewall. I'm on the same subnet
  -increases the size of memory for video display.
  -everything restarted.
  -Check the dns settings, seems to be ok.
  -removed from the field and added.

  Infra:
  ESX 5.1.0 799733
  See 5.1.2
  View customer: 5.2.1 build 937772
  VMware-viewcomposer - 3.0.0 - 691993

  I search around forums but cannot find an excat answer to this question.
  Any help much appreciated. Thank you all

  The complete list of the supported operating systems see 5.1 Agent is shown on page 15 of the installation guide - http://pubs.vmware.com/view-51/topic/com.vmware.ICbase/PDF/view-51-installation.pdf - see the section on operating systems supported for Agent view.

  You will find information on this forum of the people who got 8 windows work and to avoid the "black screen" "the connection to the remote computer has ended", but note that it is not taken in charge with Discover 5.1.x.

  Mark

• Converter Agent cannot be installed on the remote computer

  I receive the error (see attach file) then the converter tries to install the converter Agent on the remote computer.

  Any suggestion.

  Help, please.

  You can manually copy the agent and try to run it in a user session is the same credentials that the account used in step 1?

  The Agent MSI located in the folder of installation of Converter Standalone.

  You get only an error of the converter, but if more details can be found in this way.

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• the software on the remote computer seems to be incompatible with this version of screen sharing

  Hello

  I use Apple Remote Desktop (see 3.8) to a MacBook Pro 15 of the retina to access an iMAC 27 5 k. I get the following error message

  "Connection failed for 'iMac_5K'.

  The software on the remote computer seems to be incompatible with this version of screen sharing.

  MacBook pro screen resolution is 1920 x 1200

  the iMac 5K resolution is 3200 x 1800

  Thank you!

  Hemdani

  What is your question? The message seems pretty clear...

• Your computer cannot connect to the remote computer

  Hello

  OT:

  Your computer cannot connect to the remote computer because the remote desktop gateway server address request and the certificate subject name do not match. Contact your network administrator.

  I implement the remote desktop session based on Win Server R2 2012.

  I create a free sign for certificate certificate and also install the certificate to the client computer.

  But when I click on any application it shows me error.

  

  Hello

  You may need to ask the question on the TechNet forums. Please post the question here:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  Kind regards

• Remote Desktop cannot connect to the remote computer

  Hi all

  I'm having a problem on my server running Windows Server 2008 R2.

  I can not can not on the remote server by using remote desktop (mstsc).

  Here is the error I get when connecting:

  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.

  I tried to restart the services, but nothing helped.

  I even restarted the server, which did not help.

  Also, I can ping the server without any problem.

  Kindly help. !

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  Try disabling the firewall - may have to be reconfigured.

  I suggest that repost you the question in the TechNet Windows Server forum for assistance.

  TechNet

• This computer can't connect to the remote computer

  I have a Windows server 2003, and I am unable to distance on the server. The error message I get is 'this computer cannot connect to the remote computer.

  • I did a netstat - year to see if port 3389 is listening, does not see an entry for the port. I have
  • I checked the services and that they perform a remote procedure call (RPC)
  • Restarted the server several times.

  I can remote into other servers of this machine if I log in locally.

  Please advise,

  Michael McDaniel

  301-763-1160 off.

  Have you checked the firewall? Could be a firewall anti-virus that keeps you from log, as that happened to someone else on this forum recently.

• Remote Desktop cannot connect to the remote computer to one of the following reasons:

  We are using Windows server 2003 sp2 & windows xp professional sp3. We want to connect to the server using Remote Desktop, but we get the following error:
  --------------------------------------------------------------------------------------------------------------------------------
  Remote Desktop cannot connect to the remote computer to one of the following reasons:
  (1) remote access to the server is not enabled
  (2) the remote computer is disabled
  (3) the remote computer is not available on the network

  Make sure that the remote computer is on and connected to the network, and remote access is enabled.
  --------------------------------------------------------------------------------------------------------------------------------
  We have enabled remote access on the server & the user is member of admin & users group to the remote desktop on the server. The firewall is turned on & exceptions for port 3389 remote desktop.

  Could you please help us on this.

  Hello

  Search logs events on the Terminal Server and the Local user's PC

  What is happening to all users?

  -If you get an error in the TS, then this is a client-side problem.

  -Take TCP Dump using wire shark and see who is the RST sendign package.

  Look for this error message in google that could give you light...!

  Kind regards

  Dhruv

• How can I activate the remote computer to power saving Mode monitor?

  I am a technician in a small private company and it is my duty to keep all desktop computers works very well.
  Desktop computers:

  • are the Dell Optiplex GX260
  • Run Windows XP SP3
  • have Dell 17 "monitors
  • with Intel Pentium 4 (2.4 Ghz) processor with 1 GB RAM

  I do my job after working hours. I connect to them with my laptop (running Windows 7) and check their conditions, one by one. Now, my employer comes to know that when I do this whole process monitors for desktop computers continue to run. As it is not put in place a very large company and electricity and the price of fuel in Pakistan are very high. So, he asked me to find a way to turn the monitors to the power saving mode, when I do my work. In this way, it will be significant energy savings and fund savings in monthly bills. So, can someone please tell me How do I turn on monitor of the remote computer to the power saving mode?

  There are several ways to handle this.

  #1-have affected the power turn on their monitors, but let run PC
  #2-click Start > Control Panel > Power Options and choose how long it is before the screen turns off. Once your activity on their machine is complete, then will kick time.
  #3-you say that you connect to their machines to check their conditions... whatever that means exactly. You can map their computer management console directly to your machine and I * think * he didn't wake up the monitor.

  I hope this helps.

• The Client computer could not connect to the remote computer

  Hello

  Relating to the name or a customer request. They have a few problems with the remote desktop connection in Windows XP.

  They haveWindows Home Edition and XP Professional on his laptop computer on his desk.

  They say:

  "I took the liberty to install Office remotely on computers, because it was not installed on the desktop.   I was able to connect to my laptop through my desk, but not vica versa. »

  "When I try to connect to my desktop from my laptop, I get an Error Message"the Client computer could not connect to the remote computer... »

  Hello

  You can read the following article and install the patch available to see if contributing to the issue.

  You receive an error message "the client could not establish a connection to the remote computer" when you try to establish a desktop remote connection to a Windows XP-based computer

  I suggest that you post your question in the TechNet forums if you encounter other issues related to the remote desktop connection.

  Windows XP IT Pro Forums.

• A Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved

  I am trying to use remote assistance to help with my brothers computer. We both use XP, but when I try to open remote assistance to view and or even take control of his computer, I get an error message: connection A Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved. Why this might be happening?

  Hello

  It depends on how the computers are connected and their intellectual property regime.

  They are on the same network (e.g., connected to the same router)?

  Through the Internet? Something else?

  http://support.Microsoft.com/kb/300546/en-us

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  I am trying to accept an invitation from my mom's remote assistance and this is what I got after entering the password: connect Remote Assistance could not be established because the DNS name of the remote computer cannot be resolved.

  You get the error "a Remote Assistance connection could not be established because the DNS name of the remote computer could not be resolved" when the requesting computer (the computer 'demand' help) sends its private IP address instead of its public IP address in the request for assistance. The solution is 'easy' for some and difficult for others. I present here for your perusal:

  (1) obtain the public IP address of the requesting computer (by visiting a web page such as http://www.whatismyip.com)
  (2) save the remote assistance request computers
  (3) modify the remote request for Assistance (RcBuddy.MsRcIncident) using a text editor (such as notepad) and replace the private - section of IP address should be something like this:
  RCTICKET = 65538,1,192.168.1.33:3389 «»
  with the public IP address from whatismyip.com or elsewhere - should be something like this:
  RCTICKET = 65538,1,74.125.47.147:3389 «»
  (4) save the file of RcBuddy.MsRcIncident 'new '.
  (5) double click it to connect to the computer needing help
  (6) cross your fingers and hope it works!

  I hope this helps someone else - if it's too much trouble, feel free to use the tools mentioned elsewhere in this thread.

  -Computers Acorp
  www.ACoRP.net

• Connection to the remote computer problems

  Have XP Pro on work and home computers. Monitoring the windows XP start using remote desktop info. Computer work defined as host, trying to connect remote, after putting in the name of the computer to work, I get "unknown parameter was specified in the computer name field.  How can I connect to my work computer?

  Hi Raider2118,

  · What is the work computer protected by password?

  · Is the work computer have to plan together?

  When you connect to another computer using Remote Desktop connection when you specify ComputerName/console in the computer box, and then you click Connect note ComputerName is the name of the remote computer to which you want to connect.

  To get the name of the computer navigate to the location below:

  a. Click Start, right click my computer

  b. click Properties

  c. Select the computer name tab

  If you have tried the steps above and then temporarily disable the security software on the computer and then try to connect to the computer and check the results.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  I've always used my blackberry to tether my phone but I get the following error message and I can't solve this problem, any help would be appreciated, thanks!

  The connection attempt failed because the modem (or other connecting device) on the remote computer is out of use. Error 777

  Hello

  It seems that the blackberry is not more.

  Pass the installation attaches on the blackberry and make sure that it is configured properly and work.