SMS "quick text" as on the palm device?

Similar Questions

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• After receiving a text message, how to disable sounds on the Palm Pre

  Someone to help me with this, because I'm at the end of my mind! I used to have a Palm Centro, and really, no matter what other phone before my new Palm Pre, goes something like this:

  1. you get a Doi of notification when you receive a new voice message or SMS

  2. you press the volume button, tap the screen, etc.

  3. THE RINGS STOP NOTIFICATION!

  Palm Pre not have this ability? If I TEXT back and forth with someone, I have to listen to the WHOLE THING EVERY TIME? Tell me that Palm has thought of a way to solve this problem, because it's driving me batty. It's the only thing that I completely hate this phone, and I can't find someone here who has had the same problem...

  How do I stop the ringer?

  I don't know about anyone else, I get notification of all that happens: IM, text, when I charge the battery, when I'm low in battery, etc. The question I have and I hope that someone has the solution, which is to my old Palm Centro and really, all the phones I've ever owned, there was something I could press that would prevent the notification! However, nothing precludes the notification! and it's a good 30 seconds... That isn't a big deal when there is a text message, but when it is 4 text messages goes, it never stops!

• Transfer blackBerry Smartphones from Palm to Blackberry via the switch device Wizard

  I am trying to use the device switch Wizard to transfer the data from my Palm Desktop on my Blackberry Desktop (my current Palm device is the Centro, and all data are saved on the desktop).  When I get to the window "select Desktop Organizer', both ' Palm/Treo or Palm Desktop software' and 'Software Windows Mobile for devices such as a Smartphone or a Pocket PC' options grayed out and neither to be selected.  Any advice on how to skip this step?

  For some reason it should not be recognizing the Palm Desktop software.

  Once in front, I had to export all data from Palm to Cs4l or XLS file (I forget which) and then import all on my Outlook and then sync Outlook to the BlackBerry.

  I found this...

  http://www.BlackBerry.com/BTSC/KB10722

• Sound is not working, not able to turn on the audio device

  my sound I have doesn't work do not at all. I tried active but it only show the inactive button

  someone knows how to fix this?

  Hello
  
  If it only shows the option to disable that this particular reading device is already activated. I ask you to check if it is the device of correct reading you want to use.
  
  Method 1.
  Allows us to do all of the methods listed in the articles below and check if we get the sound.
   
  No sound in Windows
  http://support.Microsoft.com/GP/NO_SOUND
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems
   
  Method 2.
  Also, if your sound problem is specific to Windows Media Player or Windows Media Center, you must follow these steps:
  a. Click Start, and then type sound in the text box start the search.
  b. nattering in the Panel section listed above.
  c. click on the Read tab and click on the image with a green check mark next to him (should be the default device) so it is highlighted.
  d. click on the properties button.
  e. click on the Advanced tab.
  f. uncheck the box next to this line: "Allow applications to take exclusive control of this device."
  g. click OK.
   
  Also, make sure you have the latest audio drivers installed on the computer.
  See the article below for more information.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Quick texts?

  On my Treo 755 I could save some 'quick texts' such as: call me when you can, where are you, I can't talk now, etc.  In this way, I could add these messages to a text with the simple push of a button.  VERY convenient!

  The Palm Pre has something like that?  I can't find where it can be accessed.

  THX

  No, it doesn't have this feature at the moment.

• BlackBerry smartphones, Palm Desktop 6.2 to Blackberry without Outlook or Palm device data transfer

  Just got my new Blackberry Tour.  My Palm T / X is dead, but I still run the Palm Desktop for my calendar & contacts.  Tried to create a spreadsheet Excel and then running via Outlook by another suggestion posted, but for some reason any, I can't Outlook to open!  So is it possible to transfer data without using outlook and without having a Palm device to use?

  Thank you!!!

  If you have data in Excel, you can save the excel file in an ASCII text and file import/synchronization of the device through the Desktop Manager.

  Visit this link, ignore the part about the error and scroll to the specified resolution and follow the directions.

  KB12351 Error message when the transfer of contacts from Palm Treo on the BlackBerry device

• Error messages on the Palm Pre 2 - "could not send your message because of a network error. Try Again' 96

  I used the Palm Pre 2 when I was in the United States with an ATT Sim Card and I was able to use all the features well. I come down to the India and got a local SIM with data services. I am able to check email / synchronize outlook etc and make calls. However I get an error for text messages "" could not send the message due to a network error. Try again. 96 "

  Please tell me what could be the cause. Have restarted the phone twice, no change...

  Would appreciate any help you can give me on this

  I thought about it. I have a 32 k SIM. If I use a 64 k SIM, SMS works fine

• Whatever it is possible to increase the speed of printing, or is the printing device / network critical connection?

  As the document of the site controller, I mark & print large volumes of documents. Variating in size but that explodes in general strongly when printing.
  Search within Acrobat forums and seems quite common and probably inevitable.

  Tried with/without feeling "like a picture" but did not really much of a difference. Increase in file and the time required for printing on the same.

  However, I think that the internet high speed and or the internal memory of the printing device is too large:

  Internet high speed - also the internal network connections - is a real problem

  Printing for example an original file size 15 MB I've seen explode > 300 MB but the worst is that I can see the indicator of memory on the printer (2.5 GB installed) increase of slow death.

  Takes minutes to load a next page - often with > 50 pages documents printing - multiple copies - really takes hours

  Then of course my colleagues do not appreciate it - local printer however not an option yet.

  
  Assuming that the problem might as well not be Acrobat but also somebody can help me? I'm in contact with suppliers of printing device already to see if a larger internal memory - if possible - would improve situation.

  Next issue will be speed network & internet?  15 Oct status: no improvements made/found yet...

  
  Any help - suggestions welcome!

  The problem is that PDFs are highly compressed, but the need for printers information is just the opposite. Printers are designed on the assumption there is a fast path to the printer - cable USB or network more quickly. There may be problems of speed printer too: a PDF can have be printed a full page of graphics and a slow printer designed mainly for text might crack.

  If printing the image makes no real difference, you have a printer that requires images already...

  If the printer has an available PostScript driver (and the equipment) try this.

  If the printer is capable of printing multiple copies itself (i.e. send once, a lot of printing, rather that send several times), try this.

  If your company can't run to a few hundred dollars for a local printer, then maybe they need to spend tens of thousands on an effective network. (Yes, I know that's not under your control, it's frustrating!)

• Audit in two stages on the same device? !

  After upgrading to Mac OS Sierra the next thing happened:

  When I tried to sign in the community Apple with my Macbook Pro, I had a request of two steps and was invited to enter the 6 digit code that 'someone was trying to use my Apple ID to a place near me'... about 300 Km.

  I agreed, but the strange thing is that I got the 6 digit code on my Mac, where I had to type.

  Very easy process, but what is the meaning of this if I get the same code that I have to type on the same device? !

  I was a believer to receive on my iPhone or by SMS.

  There is something strange about this event?

  This scene reproduced whenever I tried to connect to the Apple community, until I checked "remember this browser.

  Tnxs.

  I arrived as well. My guess is that your mac is the only device approved for now, so the only option for apple is to send the code.

  If you go to ibutt settings in system preferences and click on account details, you can see which devices are approved under the devices tab. For me, it says my iphone is not usable as a trusted device, and I did bother to see if I can change this again, but I guess it can be done somehow.

  Edit: I just stumbled upon a thread discussing the same thing and found this answer, that solved the problem for me: Re: why Apple showed the authentication code to two factors on the same device that I connect to?

• Can I retrieve text messages from the phone memory?

  Can I retrieve text messages from the phone memory? I read that it is possible via iTunes and third party programs. It is of course possible, can what third-party program you recommend? (because I have no backup in iTunes)? I need to backup this message, because I have to use this evidence in court...  I have Iphone 4 and iOS 7.1

  Bardyt wrote:

  Can I retrieve text messages from the phone memory? I read that it is possible via iTunes and third party programs. It is of course possible, can what third-party program you recommend? (because I have no backup in iTunes)? I need to backup this message, because I have to use this evidence in court...  I have Iphone 4 and iOS 7.1

  The only way to recover data from your phone is if you have backup icloud or iTunes.

  If you have not made a backup, then sorry that data has disappeared.

  you suggest that to start your backup device.

  The backup of your iPhone, iPad and iPod touch - Apple Support

• Portege R400 - how to get the fingerprint device to HDD unlock

  Portege R400 model PPR40E-00901LEN

  I've had this laptop since 2007 new (approximately). I put the BIOS and disk passwords HARD and the biometric to unlock the BIOS, HARD and Vista drive. It worked well until recently. Result of an incident when someone tried to crack into the machine, it unlocks is no longer the HARD drive

  The attacker confessed to the use of BACKSPACE to work around the footprint digital, correctly guessed the password of BIOS and going on to make several attempts to enter the HDD password.

  Now when I try to access the computer by using the fingerprint reader, it unlocks the BIOS ok, so he remembers clearly to me. However, it is not open HARD drive. Apparenlty the fact that 3 + failures to enter the master password disk HARD text forces text of this password and no biometric entry. At least, there seems to be something like that.

  My questions are

  (1) in these circumstances, the BIOS anterio-rite the biometric to forget the HARD drive password?

  (2) or is still piometric my disk HARD but the BIOS password feature is not asking him?

  (3) if 3 or something similar, so this password is always in the biometirc device, how to tell the device to provide this password?

  Please note that I can't in the BIOS right now, because do not unlock the HARD drive prevents the POSITION to perform.

  Of course, I know what I really need to do is type the HARD drive password. Unfortunately in about four years, I forgot it. I hope that I can get into the BIOS if I remove the HARD drive physically, but wonder if there is something else I should do first in order to avoid making things worse.

  Thanks to hope
  River ~ ~

  Post edited by: river14april

  Post edited by: river14april: typos and clarity

  null

  Hello

  All I know is that the fingerprint for Win 7 software is created by UPEK company.
  http://www.UPEK.com/support/customersupport/psql.asp

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• Find the USB device

  Hi all

  I have a USB-6008 which plugs directly into a PC.  I'm building a box that has the 6008, for a client, and I will give them a labview so exe.  The exe will control the 6008.

  When the 6008 more to the PC of the client, the 6008 could be dev1, dev2, dev3, etc., depending on the number of devices are connected to the customer's PC.  My labview program has to know the name of device to work properly.  How can I implement search routine that would find that the name of the 6008 is on the PC of the client?  If this is not possible, how do options in the control of device more descriptive name?  Thank you!

  BTW, for the dashboard in the discussion Forum, how can I clean the topic I have previous posted?  The scoreboard shows that I have more than 2 pages, but I can get the rest of the pages.  How do I do that?

  Yik

  Hello Yik,

  I built a quick VI to illustrate some of what my colleague has said. Basically, you use a system property node, found on the navigation features DAQmx Palette > advanced > system Set Up > node property system. The property that you want to use is Dev names. This will return a list of all the names of DAQmx device on the system. Now, if you run these through a loop for example, you can use a property node DAQmx Device to read the credentials for this device. Right-click on the loop for at the border and add a conditional Terminal loop for, this will allow you to leave the loop when you find the device that you want. You can then use the string concatenation function to add channels to your device name, and then you're good to go. I have attached the example below.

  Now it's you, how you decide you have found the right device. While you can search for the Type of product I in VI, a problem arises if your customer is likely to have more than one USB-6009 in their system. The program stops at the first of she concludes, and if it is not yours, you have problems. Instead, it could be useful, if you know the unique serial number of the device you build in your Inbox, it might be better to use it to identify the appropriate device. Serial number is another property of Identification.

  Kind regards

  Frederic M.

• Problems with sound and Audio - realtek hd audio is not compatible for the audio device

  I use Windows XPand receives my sound and audio to work, I got a lot of response to this problem, but not the right answers, I got my sound set correctly but my audio does not work. In my default audio device is defined as realtek hd audio that is not compatible for the audio device, I tried to remove it without any success because I don't know what else can be done to solve this problem. I did an update can also be found a update driver for my sound card in windows. I also run microsoft fixi it and said that my default audio device is wrong, I tried to change, but nothing seems to work. Before that my computer was working fine and now all of a sudden nothing works. Everthing is up-to-date on my computer except the I'm having problems. all I ask you, how can I removed realtek hd audio since I graduated from the audio device by default.

  Thanks for a quick reply.

  Hello

  You will remember to do recent changes to the computer before the show?

  I suggest you to download and install the latest driver audio realtek for Windows XP from the link and check if the problem occurs:

  http://www.Realtek.com.tw/downloads/downloadsCheck.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false