Spectrum 360: wifi connection very erratic on new spectrum 360

Similar Questions

• WIFI connection not found on new s205

  Hello

  I hope someone can help me... I just bought a new laptop s205 and it does not find the connection Wireless in my apartment. The wireless feature is enabled on the laptop and it is another link in the building but did not find my router.

  I use another laptop which connects to the wifi perfectly, and so do other devices, but my new laptop just has not even listed.

  I tried to connect via the Ethernet cable which works fine, but I want to use wireless. If someone can help me to work on the problem I'd be very grateful - I tried to find an answer in the other posts, but I can't find exactly the same problem. Please use some basic terms that I am certainly far from an expert

  Thanks in advance!

  Problem solved of YIPEEEEE! I called my ISP and after changing of many parameters, I'm now operational wireless!

  The problem was that my router has been configured as WEP, and apparently for many new computers, it will not work, it must be rather WPA - as soon as I changed this setting it detected my router immediately.

  Thanks for your time anyway - and I hope that this solution will be useful for others = 0)

• iPhone 5 only connects very well with 5 Ghz Wifi

  Hi all

  After trying Beta iOS10 I 'come back' iOS9 and I discovered that my iPhone 5 will not connect very well to 2 .4GHz wireless networks. The problem is that the iPhone or do access or has a very poor connectivity, so that I can use this wifi perfectly with my iPad or Macbook.

  However this iPhone connects perfectly to Wifi 5 GHz networks and works as it should.

  I tried to reset, restore the default values, reinstall iOS... any suggestions?

  Hello iovin80,

  Thank you for using communities Support from Apple. I know having a problem connecting to the Wi - Fi on your iPhone, it's not what you expect. If I understand correctly, you cannot connect to the network 2.4 GHz Wi - Fi, but the 5 GHz channel works very well. I suggest to test it on another Wi - Fi network to see if the problem is resolved. You should also check the recommended settings to avoid any interference in the present statutes:

  Potential sources of Wi - Fi and Bluetooth interference
  Recommended settings for the WiFi routers and access points

  See you soon!

• problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  Problem with WiFi connectivity with new Ipad Pro.  Unable to connect to the wifi at home.  My other devices (mini mac, iphone, iPad 2) all work fine on my wifi at home.  I am able to connect Ipad Pro wifi work.

  On the Pro iPad, tap settings > general > reset > reset network settings

  You will need to re enter your Wi - Fi password.

  Then try to connect to your Wi - Fi network.

  If this does not help, more available in this support article suggestions > If your iPhone, iPad or iPod touch connects to a Wi-Fi network

• What will I do if the wifi connection is interrupted during the update the new os 9.1

  I already download the new ios 9, but unfortunately the wifi connection and the update of the icloud setting was not able to go forward, what I'll do then its keep on update

  Try to hang the iPad to a computer and see if you can continue installation using iTunes.

• Connection WiFi guard fall on my new laptop of HP ENVY m6-k025dx Sleekbook.

  Hello

  I just got my laptop new HP ENVY. Name of product: m6-k025dx. It works on 64-bit Windows 8. I feel a sudden loss and frequent my Wifi connection. When it disconnects, I don't even connect it to cursor (that slides off the right side of the screen and displays the network list) by clicking on the network down button to the right of the screen. I have to restart my laptop to connect again and after 5-7 minutes, I lose again.

  I have tried many suggestions on the amendment to the Plan of power for maximum performance and uncheck "Allow the computer to turn off this device to save power", but nothing seems to work.

  The network driver is Intel Centrino Wireless - N 2230. I have also updated the driver and off Bluetooth and ethernet as part of suggestions found on the web.

  I don't know if it is a problem of Windows 8 / Intel / HP. Help, please.

  Nadeem

  From my own research, if you have an intel centrino N - 2230 network adapter and use 8 64-bit windows, you need a new driver. This adapter has connectivity wifi which are known for problems intel. Check here: http://www.intel.com/support/wireless/wlan/sb/CS-025332.htm and then contact an HP tech via chat and they correct Web site, download and install the new driver from intel. I tried to do it myself, and it did not work. The technology did for me by online chat and remote assistance. Do it for what they tell you it's a hardware problem. It's a problem of network adapter that requires an updated driver. Let me know if it works for you.

• Very unstable WIFI connection on Satellite A200 PSAE4E

  Just had my Equium A100 replaced with a satellite pro A200 and for some reason that I am fighting to get it connected to my wireless network. I had the old laptop connected properly and used channel 11 on my WAP.

  Now, after trying to connect my new laptop I find the connection very unstable. I tried different channel numbers, and these worked mainly the lower numbers, but are proved to be slow and unreliable. I have other laptops that are very well using my WAP to channel 11.

  Anyone who has experienced this trouble and what is the solution.

  WAP Netgear wg602. No firmware update available

  See #.

  Macca

  Hello

  Just a question: do you use pre-installed Vista or maybe WXP on your new laptop computer?

• WiFi worked very well. Tried to connect the second device. "Wi - Fi auto-assignée 169.254.49.8 IP address and won't be able to connect... »

  One of our MacBook has been connected to the internet through our router base station Airport Express wireless and wifi worked very well. All of a sudden, the other MacBook could not connect. After a few days of no connection on one while the other worked, we rebooted the modem. Now neither laptop connects. We called our ISP and they verified that all is well with our internet service or the modem. Internet works fine with the cable plugged directly on each machine. Under network in system preferences, I get this message: "Wi - Fi 169.254.49.8 auto assigned IP address and won't be able to connect to the internet." When I run the diagnostic, I get a message saying that my network configuration has changed, but it has not changed anything. We have never gone and nothing changed since we first set up the modem and the AEBS. Any ideas on how to solve this problem?

  Yes, the express can do that... Suddenly lose the configuration and return to the bridge for example even when connected to a modem to bridge.

  The solution is simple... Press reset and redo the Express installation.

  NOTE... an Express is not expected that the main router... It's light to etc. of airprint, airplay wireless bridge. Don't wait to have no problems when you use the Express to do the work of the extreme or TC or another router should do.

• My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

  Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

  Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

  What is going on?

  I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

  Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

  This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

  Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

  Try to connect the Apple TV via ethernet

  To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

  Test on another network

• Pavilion x 360 s195nr 13: 13-s195nr of energystar HP Pavilion goes constantly limited wifi connectivity.

  computer new laptop will constantly limited wifi connectivity after a few minutes.  He has done this since I first started the laptop.

  Hi @Willis6,
  
  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!
  
  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook 13-s195nr and problems with wireless disconnection. In Device Manager, click network adapters. Find network adapters, your wireless network and on the right, click on it and then go to the power management tab and uncheck sur-autoriser computer to turn off this device to save power.

  Here is a link for troubleshooting wireless connection, if you need.

  Some say that this download will help fix this Microsoft Fix it.

  Please let me know how it goes.
  
  You can say thanks for trying to help by clicking on the Thumbs Up below!
  
  Thank you.

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Satellite NB10T - A - Wifi connection limited running Windows 8

  Hello

  So I got a new NB10T-A Satellite with windows 8 and have problems with wifi connectivity.

  It says I'm connected but the connection is limited.
  I know that's not my wifi because all other laptops and computers in the work of the House very well with windows 7 and proffessional ect.

  I tried almost everything, including troubleshooting, who comes up with the message: problem with access point or adapter without wire and/or invalid IP configuration.

  Any help would be greatly appreciated.

  I guess you don t know that win 8 happened and obsolete. The new 8.1 Win was published by Microsoft a few months ago and you could upgrade the Win 8 to 8.1 win free.

  For this I recommend you follow the instructions step by step for Toshiba
  [How update of Windows 8, Windows 8 | http://www.Toshiba.eu/innovation/Generic/windows8_1-Upgrade-stepbystep/]

  With regard to the Wlan.
  I think the Win 8.1 upgrade should solve your problem, but I think you should also remedy in new installation of the Wlan driver

• Satellite A300 - give up WIFI connection

  I recently bought a Satellite A300, but unfortunately it keeps down the internet WIFI connection while surfing the net.
  It's only recently, in the last 2 weeks and I did not install new software that can do this.

  I have a connection by wireless modem netgear aged 12 months which is connected to my main computer (wireless).
  I use a secure connection which needs a wep key and is compatible with Windows Vista.

  I also use this connection for my laptop from a different manufacture that I have no problem with. I also have Wifi on Wii and Xbox so I was wondering if there could be interference. Xbox Cup connection also.
  I have only 2 related both objects and they are not even in the same place or even near each other...

  When I diagnose the problem it says weak signal, but the intensity of the signal on the computer shows excellent.
  If I plug the ethernet cable then everything works fine.

  Very puzzled as to why this happens, having run checks virus on computers and nothing.
  Uninstalling the connectivity doctor, still no joy.
  All that it suggest that there is problem ISP but given that I can connect to my other laptop and desktop PC and no problems so do not know if it is...

  Can someone help, I'm not very technical and am now very mentally drained

  Thank you

  Hello!

  First of all, you must update your WLAN driver. You can find it on the Toshiba site:
  http://APS2.toshiba-tro.de/WLAN/

  He recommended to disable some options that could have an impact on the energy-saving WLAN functionality.
  In your case I would deactivate the energy saving WLAN and maybe this document option is useful for you
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  Good bye

• NB305 - impossible to get a WiFi connection

  Bought a new NB305 today. Set up (apparently) OK, but I can't get a WiFi connection. It recognizes my home network but will not connect. Convenience store etc can not solve.
  I can connect using a T-Mobile dongle only.

  The netbook runs Windows 7 Starter and I have a Belkin F5D8632-4 v1 router. Is that what may be a compatibility problem between Windows 7 and router? I checked the drivers wireless on the netbook and the two are the latest versions.

  After having spent the last hour or so looking through this forum and others and tried various things, I am now at a loss.

  Any ideas?

  Thank you very much.

  Hi Nickverwood,

  In my opinion he should t be a compatibility problem between Windows 7 and your router. Normally, you can connect to the router with all operating systems.

  It would be interesting to why you can t connect. Are you prompt for the password for WIFI and you use the right one?
  Maybe you have enabled filtering of MAC addresses on the router to allow the MAC address of the NB305 first before can connect you.

  Have you tried an update firmware for the router?

• HP laptop - 15-ac126tx: 15-ac126tx wifi connection not identified and not Internet

  Hello

  I bought a new laptop with windows 10(64bit) and tried to connect to my wifi at home. But he kept having network as "not identified" with the limited connections icon. Same thing with ethernet connection. I'm sure this isn't my router, I have my desktop and mobile on wifi and ethernet and they work, although they are windows 7. My mobile office with windows 8 also connects very well.

  Here is the screenshot of HP Network Diagnostics. I tried "update driver", download fresh drivers from the HP site , reset, re and uninstall drivers install them, disable firewall and all that... With a lot of work around, I was able to update windows and Support from HP who invited to download drivers and other things... All this and yet the results of sam.

  IP of Windows Setup (ignore Ethernet 2 because it's my mobile access point). For some reason, it doesn't auto IP from the router.

  Hey,.

  I got this resolved!  I hade to call to the ISP provider and it reset the router for me. The type of connection to the router has been "Sylvie", that has worked well for all systems prior to windows 10. Now it has changed to "PPoP creds with everthing. This is done, restart the router, set the system to get the automatic IP address.

  Trobuleshooting as follows:

  -If you set your IPV4 IP and DNS IP manually and who gets your laptop computer conencted then the above solution will work for you.