SQLDeveloper hangs intermittently

Similar Questions

• Equium A200 - 1VO hangs intermittently

  I bought a brand-new Equium A200 - 1VO and it crashes intermittently. When it crashes near the top, nothing does. Laptop must be switched off / get it on.

  No one knows why this happens? Nobody knows how to solve this problem permanently? Your help will be appreciated.

  Hello

  You must understand that no one can give you an answer why this happens. Nobody we exact configuration for laptop and software pre-installed. I imagine that some background activity forced CPU to 100% of the blocks of its use and laptop.

  Try to open the Task Manager and try to find out what process force CPU 100% usage.

  I noticed the similar problem by running IE7 on my Satellite P200.

• Web browsers freezes / hangs intermittently - Firefox/IE11

  Recently installed Win7 64 bit on a PC with Windows Vista already. Periodically, my browser starts unresponsive.

  For example.

  Open Firefox, normal... click a link to a site web, data gets transmitted (little logo goes round and round at the top left). Then it stops (hangs). The only thing I can do is to close the application.  The rest of the computer is fine IE works normally at this stage. I then opened IE11 and it locks without even load my homepage. Go back and re - load Firefox - sometimes my home page load - sometimes I get a message from FF on a mistake from previous session.

  This will continue until I connect and turn it back on and sometimes stable for a while, then leaves. Finally, IE11 loads normally.

  I've disabled all the plugins/add on the corn makes no difference.

  When I was with vista on same PC hardware, I seem to recall something about drivers Realtek PCIe Controller (network hardware) Family I had problems to install a driver more recent that really fuck the PC then he returned to the former. Found some info on that somewhere and do not do what I did. Can't find that now!

  I have the same motherboard - when I installed Windows 7, which initially found a driver during installation and everything was normal, but didn't leave it too long before I updated the driver for a newer version. For a while, things were ok but now I'm stuck with this really irritating problem. Have no idea if this could be the problem, but something interferes with the web browser and nothing else?

  Use Bitdefender Total Security 2014 - do not believe this to be a problem. No virus/malware etc plans to buy another NIC PCIe for about £6 see if this is the cause but would really appreciate other ideas to try.

  Recently installed Win7 64 bit on a PC with Windows Vista already. Periodically, my browser starts unresponsive.

  For example.

  Open Firefox, normal... click a link to a site web, data gets transmitted (little logo goes round and round at the top left). Then it stops (hangs). The only thing I can do is to close the application.  The rest of the computer is fine IE works normally at this stage. I then opened IE11 and it locks without even load my homepage. Go back and re - load Firefox - sometimes my home page load - sometimes I get a message from FF on a mistake from previous session.

  This will continue until I connect and turn it back on and sometimes stable for a while, then leaves. Finally, IE11 loads normally.

  I've disabled all the plugins/add on the corn makes no difference.

  When I was with vista on same PC hardware, I seem to recall something about drivers Realtek PCIe Controller (network hardware) Family I had problems to install a driver more recent that really fuck the PC then he returned to the former. Found some info on that somewhere and do not do what I did. Can't find that now!

  I have the same motherboard - when I installed Windows 7, which initially found a driver during installation and everything was normal, but didn't leave it too long before I updated the driver for a newer version. For a while, things were ok but now I'm stuck with this really irritating problem. Have no idea if this could be the problem, but something interferes with the web browser and nothing else?

  Use Bitdefender Total Security 2014 - do not believe this to be a problem. No virus/malware etc plans to buy another NIC PCIe for about £6 see if this is the cause but would really appreciate other ideas to try.

  Hello

  The problem "Not responding" for IE and other software is a common problem for windows PC.

  I personally do not recommend this is to say that there is NO DIFFICULTY for the problem and it hangs even if you disable all because of the DEP!

  For FireFox, I had the same problem and a way to avoid what is happening is to turn off of following in Firefox options (press alt and T and in the menu Tools go to options):

  tab in advance:

  UN check under general settings:

  "use hardware acceleration when available.

  under settings choice given UN check:

  "Telemetry".

  "Report on the health of FireFox.

  "Crash Reporter.

  Sub tab network:

  Go to "Connection settings" and choose a Proxy.

  Also, make sure that your plug-ins and Add-ons are up to date.

  Plan to run fewer programs at the same time according to the specifications of your system. Reduce your start up programs as much as you can and make sure that your system is clean. Search on your computer regularly for viruses, malware and spyware!

  Also de-fragment of disc and cleaning can also help to prevent this problem in the future.

  For Internet Explorer running the fix next tools:

  http://support.Microsoft.com/mats/ie_freezes_or_crashes/

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  OR reset your Internet Explorer settings:

  http://support.Microsoft.com/kb/923737/en-us

  Please visit my blog here for more information:

  http://safeworldwidewebsurfing.blogspot.co.UK/2014/03/how-to-prevent-and-solve-not-responding.html

  Hope that help the above!

  My blog:

  http://safeworldwidewebsurfing.blogspot.co.UK/

  http://cheap-laptop-PC-repair.blogspot.co.UK/

• Windows hangs intermittently and sometimes upwards down

  Greetings!

  Windows has been intermittently locking up and sometimes it will lock upward and the OS will crash.

  What will happen, it's the computer will stop working, can't move the mouse, etc., but then come back.  Sometimes, the behavior of the cursor will change (showing pointer when it should be the line of text, or vice versa) and sometimes not.  There are times where it will happen immediately, and sometimes it won't happen for a long time, and sometimes not will be not at all.

  The ONLY common thing I observed that I have usually have Firefox running and am browsing on the web, or running videos.  It seems that Flash might be involved, but it is difficult for me to say.

  I have the XML and DMP files since the last accident of BSOD, but do not know where I would set those on this post.

  Thanks for any help!

  Stop 0 x 124 is a hardware error

  If you are overclocking try to reset your settings to standard processor and see if that helps.

  If you keep getting the BSOD here are things more than you may want.
  This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.
  
  Stop 0 x 124 - what it means and what to try
  Synopsis:
  A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
  Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.
  

  Generic troubleshooting ' Stop 0 x 124 ":

  1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
  (2) ensure that the machine is sufficiently cooled.
  If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
  3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
  It is best to run the latest drivers anyway.
  (4) update the BIOS of your motherboard according to the manufacturer's instructions and clear CMOS.
  Their website should provide detailed instructions on the brand and model-specific procedure.
  (5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
  At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
  6) trying (stress) test these hardware components that can be put to the test artificially.
  The most obvious examples are the RAM and HDD (s).
  For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
  For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
  Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.
  7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
  Who stops working mitigate the problem of the 0 x 124, jump to the next step.

  
  If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
  Smash back, obviously the latest addition of software may be somehow connected to the root cause.
  If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
  Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
  (8) clean and carefully remove the dust inside the machine.
  Reinstall all memory modules and connectors.
  Use a can of compressed air to clean the RAM DIMM supports as much as possible.
  (9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
  Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

  If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

• Oracle 10g in VMware hangs intermittently

  ORACLE V10.2.0.4.0 - 64 bit
  Running on a Windows Server 2003 virtual server (VMware)
  2 GB of RAM is available for this virtual machine.
  
  I have two separate facilities in the configurations above. The two instances are blocking intermittently. I tried to play with memory and on the virtual machine and within the Oracle, but it's not helping.
  
  There are messages in the alert log file:
  
  Mon June 22 at 16:07:12 2009
  Errors in the c:\oracle\product\10.2.0\admin\psdmi\bdump\psdmi_s002_1216.trc file:
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  
  Mon June 22 at 16:07:12 2009
  Errors in the c:\oracle\product\10.2.0\admin\psdmi\bdump\psdmi_s003_2984.trc file:
  
  Mon June 22 at 16:07:13 2009
  Errors in the c:\oracle\product\10.2.0\admin\psdmi\bdump\psdmi_s002_1216.trc file:
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  
  
  
  Info from psdmi_s002_1216.trc
  
  C:\oracle\product\10.2.0\admin\psdmi\bdump\psdmi_s002_1216.TRC dump file
  Mon June 22 at 16:07:12 2009
  ORACLE V10.2.0.4.0 - Production of 64-bit vsnsta = 0
  vsnsql = 14 vsnxtr = 3
  Oracle Database 10g Enterprise Edition Release 10.2.0.4.0 - Production 64-bit
  With partitioning, OLAP, Data Mining and Real Application Testing options
  Windows Server 2003 V5.2 Service Pack 2 Version
  CPU: 2 - type 8664, 2 physical cores
  Process affinity: 0 x 0000000000000000
  Memory (success/Total): Ph: 1142 M / 2047 M, Ph + FCP: 3067 M / 3964 M
  Instance name: psdmi
  
  Redo thread mounted by this instance: 1
  
  Oracle process number: 16
  
  Windows thread ID: 1216, image: ORACLE. EXE (S002)
  
  
  ACTION NAME :() 16:07:12.628 2009-06-22
  MODULE NAME: (java.exe) 2009-06-22 16:07:12.628
  SERVICE NAME: (PSDMI) 2009-06-22 16:07:12.628
  SESSION ID: (117.13) 2009-06-22 16:07:12.628
  16:07:12.628 2009-06-22
  ksedmp: internal or fatal error
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  [ORA-00600: internal error code, arguments: [17099] [] [], [], [], [], []]
  For this session current SQL statement:
  Start: 1: = JAVA_XA.xa_start_new(:2,:3,:4,:5,:6); end;
  -PL/SQL call stack-
  the line object
  serial number of handle
  Package body 8 000007FF9F32D728 SYS. JAVA_XA
  000007FF9F32F488 1 anonymous block
  check the file c:\oracle\product\10.2.0\db_1\rdbms\trace\psdmi_ora_0.trc trace for preloading the .sym file messages
  -Call trace stack memory-
  call call entered the argument values in hex
  location point type (? means dubious value)
  -------------------- -------- -------------------- ----------------------------
  ksedmp + 663 APPEAL? ksedst + 003C878B8 55 01185F7F8 000000000
  000000000
  ksfdmp + 19 CALL? + 000000003 663 00F08F650 011CE12F8 ksedmp
  003CACC80
  kgeriv + 184 APPEAL? ksfdmp + 19 000000000 000000000
  7FFA3E635C0 000000000
  kgesiv + 102 APPEAL? + 184 000000000 00001E658 011861690 kgeriv
  0009939D 3
  
  
  
  Anyone seen this before? I have googled and looked for the error, but I have not found anything useful. I have databases Oracle similar setup running in W3K on a physical box and that works very well and makes me think if it has something to do with running in VMware.
  
  Any pointers/suggestions will be greatly appreciated.

  Bad situation. You encounter internal errors, which generally require the help of Oracle support. Oracle VMware is not supported, so support will refuse to help him. They will ask to reproduce the problems in a supported environment, but here, everything is fine - as you say.

  It's always a risk to run Oracle software in an unsupported environment.

  Werner

• BlackBerry Q10 Q10 hangs intermittently since 10.3.1.1779 update / wipes applications, contacts, accounts

  My bodyguard Q10 randomly crashing since I updated the 10.3.1.1779 softward, and each time he wipes all my apps, contacts, accounts, messages all.  Please help, it's incredibly frustrating.

  I was advised to do a security reset which did not make a difference, and to top it off, I can't restore my backup file as he claims by BBID is not the same...

  Hello and welcome to the community!

  Here's a knockout who deals with this error:

  • Article ID: KB36747 All data are deleted after a manual restart of smartphone BlackBerry 10 and a blue LED is displayed when starting the

  I hope that it contains something useful! There are also several existing threads on this site, which discuss exact error... your opinion of those who may prove useful, and a search of this website, by using the error message, error code or symptom, should reveal all the existing threads that are applicable to you.

  Good luck and let us know!

• Windows application crashes because of CLR.dll - Windows 2008 R2 Server

  Hi all

  I have a Dot Net Framework 4.0 based on Visual Studio 2010 Professional application that runs as a Windows Service on Windows Server 2008 R2 Enterprise Version Service Pack 1, 64-bit operating system.

  The application appears to hang intermittently and the reason is as below:

  Name of the failed Module: clr.dll, version: 4.0.30319.1026

  Exception code: 0xc0000409

  Offset error: 0x002b79d8

  Path of the failing module: C:\Widows\Microsoft.NET\Framework\v4.0.30319\clr.dll

  May well want to let me know if there is no FIX for this problem of CLR.dll crash? If so can you let me know about the same thing?

  
  This issue is beyond the scope of this site and to make sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Computer crashes when you use the RunAs service.

  The computer stops responding completely after using the RunAs service. Microsoft Word hangs intermittently so. I checked for bad RAM and malware. I think an OS reinstall will fix this problem. It is Windows XP SP3. It's a Dell.

  Hello AMD_64,.

  Have you had recent virus infections?
  If so and they were correctly deleted, on-site upgrade or reinstallation of the operating system may be your best option:
  http://support.Microsoft.com/kb/978788

• T61 gel when running on battery - no problem when it is plugged

  Got a new T61 2 weeks: 6459-CTO, Vista 32, T9300 2.5 GHz, 4 GB of RAM, Intel Turbo Memory. Everything is fine except the following problem: when running on battery only (not connected) the system hangs intermittently, programs stop responding, ctrl alt del does not work, only solution is a hard closed down. Lenovo sent me a replacement battery but same problem persists. Very annoying! System has never frozen when connected to the AC. All PC Doctor diagnostics OK. Insatalled latest drivers etc. Is update system, including Windows update. I have read that some versions of Intel Turbo Memory has had this problem when running on battery alone, but apparently this has been corrected with the later driver versions of Inter Turbo Memory - I later. Any help would be appreciated.  No problem other than that - I can't use the laptop on battery with confidence.

  All is well so far - no freeze no more! Now I can use my laptop because it was intended to be used - in battery mode - in the yard!  I wonder when Lenovo makes available this driver for their production. This problem of gel certainly did me a lot of grief.

• Inspiron 7347 touchpad problems

  I got my Inspiron 7347 for a few days.  When using the battery, the touchpad exposes some quirks that make this extremely difficult to use as a laptop P:C.

  The mouse on the touchpad hangs intermittently, sometimes for several seconds.  This erratic behavior makes the mouse terribly difficult.

  When scrolling with the mouse on a vertical scroll bar, right-click for the Office menu keeps popping up.  I have to move the mouse out of the scroll bar, left click to get rid of the right click menu and reposition the mouse on the scroll bar.  Sometimes this behavior is constant when you scroll a page long, it is impossible to use the mouse to scroll.

  I searched this forum to find answers, but what I find is other users complain the same problems going back months.  This is one of the sons, started 09/11/2014, nearly two months ago:

  en.Community.Dell.com/.../19606250

  I struggle to understand how Dell can sell and PC are provided with a well-known set of very serious problems of touchpad.  My guess is that a new driver is needed - NOW!

  All the answers?  Thank you.

  The touchpad on my Inspiron 7347 was replaced under warranty.  A technician came to my house and swapped for a new touchpad.  Most of the problems that I had is now resolved.  He was not a software/driver issue in my case, but rather a faulty touchpad. The hesitation frequent moving of the mouse and gel disappeared.  The mouse is now pretty much behaving as expected.

  A 'trick' I discovered - as the mouse moves when you click, I keep my finger of the right hand on the mouse pad and click on with my left hand.  Using two fingers tends to keep the stable mouse while clicking.  I think that the basic design of the mechanism of rattling is simply bad.  One of the technicians agree chat with me.  The trick of two fingers, it is achievable.

• Error - Stop 0x0000007E

  Hey guys

  Since yesterday I've been doing these stop errors. So far I have at least every hour. I tried to use CC cleaner, but it did not help. Also, I restored my computer to before that stop error started, but that did not help either. They are yet to reproduce. There is not really any model to them either, they occur when I use chrome, regarder watch movies, no matter what. So I have not isolated a specific program. The only thing that I think could be what is torrenting, I was downloading a lot recently. But I never download questionable torrents and I always do a complete norton of the system scan immediately after and nothing was found. So could someone please advise me on how to solve this problem! Thanks in adavnce!

  

  Hello

  Try running the fix provided by Microsoft and check if the problem persists.

  Operating system hangs intermittently with a Stop error message "0x0000007E" on a computer that is running Windows 7 or Windows Server 2008 R2

  I hope that helps!

• Keyboard HP Pavilion dv6 Notebook slow

  Problem: laptop keyboard responds slowly (keys but appearance on screen lags obviously) and hangs intermittently for 1 or 2 seconds.

  Note: The TouchPad works very well.  External wireless mouse works fine.

  Computer:

  Product name: HP Pavilion dv6 Notebook PC

  Model: dv6-6c14nr

  Windows 7 Home Premium 64-bit Service Pack 1

  Intel Core i5 - 2450 M 2.5 Ghz

  12 GB OF RAM

  13 months old; out of warranty by 24 days

  What has been done:

  Cleaned vents with the empty (very little to no dust)

  Battery removed (no power supply) for 10 minutes, reinstalled and restarted

  A ran Malwarebytes Quick Scan freeware;  No problem

  A ran Malwarebytes Full Scan freeware;  No problem

  Avast ran full system scan freeware: no problem

  Ran CCleaner

  Ran Glary Utilities 3

  Ran Spybot 2.2 removed 15 rejected

  A ran chkdsk c: no problem

  Different system restore ran 2 points without change

  A ran MemTest86 + Pass

  Remove temporary internet files

  A ran SFC/ScanNow No. questions

  Unchecked sticky keys

  Set up sticky keys 5 x Maj unchecked

  FilterKeys uncontrolled

  FilterKeys implemented 8 s Maj unchecked

  Manager, uninstalled keyboard.  Rebooted, auto reinstalled system keyboard.

  Installed HP updated to Touchpad - sp40983.exe - no change

  No updated HP update available for keyboard specifically

  ANY help - in particular a working Solution - would be most appreciated!

  Thanks in advance!

  Here is the solution!

  Run mssconfig.exe (click the Start button, type msconfig, click msconfig.exe)

  On the STARTUP tab, disable all programs except those required for your computer.

  In my case (HP Pavilion dv6 Notebook) the following programs have been enabled (checked).
  Synaptics Pointing Device Driver<= the="" latptop="" key="">
  IDT Audio of PC<= the="" laptop="" sound="">
  HP CoolSense<= the="" laptop="" temperature="">
  MS Security Client<= microsoft="" security="">
  MS SkyDrive<= microsoft="" on-line="">

  EVERYTHING has been disabled (unchecked)

  Then I restarted the laptop.

  The keyboard problem has been resolved and is been solved!

  I learned from a friend of tech support that all other startup programs no longer of
  grains which are responsible to speed up loading of the program if you want to use.
  Deactivation of these nuclei may be added 1 or 2 seconds of loading time.  And frankly, I
  did not notice any delay at all when I called is no longer in a program that has been pre-loaded.

  Obviously, one of the nuclei was causing the keyboard problem.

  Total time invested; fifteen minutes.

  Better that HP wanted to load to "clean" my laptop at $99!

• Missing: "liveupdate.dll.

  Bought new hp h8 1234 pc, tried to install one of my wise programs care 365 utility progam, installs successfully, but when I open the program, missing popup error: ' liveupdate.dll "" "and does not open.

  This wise care 365 ran fine on my old pc: hp pavilion p6236f Windows 7 Ultimate 64-bit...

  Is my new pc: HP Desktop - Pavilion HPE (H8-1234) 10 GB/1 TB/AMD Six Core FX-6120, 64-bit edition Windows 7 Home premium & running Internet Explorer 9...

  The fact of any Microsoft Techs. or Microsoft Engineers have any suggestions how to install "liveupdate.dll? While I can run this program...

  Would be greatly appreciated... !...

  Hello: Vijay B.

  Discovered "LiveUpdate.dll" must be written in software wise care 365, was sent by wise care... Which has been rectified...

  There is no malware or Trojan horses in my system... Use MalwareBytes & Hitman Pro 3 programs... Every day... and for what Miss Norton Internet Security...

  But have another problem with IE 9 64 bit. with stops or hangs intermittently, tried everything with Solution Microsoft Fix - It tool, nothing helps...

  Is there a tool scan to reveal problems of IE 9? and corrections of specific problems?  My new pc came with IE 9 already installed...

  AT & T - Yahoo Toolbar cause this problem with stop & gel?

  Thank you! answer for you & your time! Will keep your last response for future reference!

  Best regards!

  Vantaman

• Autologin fault after the forgotten password Action

  Hello

  We have (11.1.2.2.4) IOM / OAM (11.1.2.2.5)/OUD(11.1.2.2.1) integrated. We have made the management of users and password management use case implementation.

  After the forgotten password action, the user should ideally be auto connected to the resource to which they want to access. But here, they're trying to autologin, we get no answer which records the time that we are witnessing a thread blocked in IOM. Please find the attached log. Its showing IOM tries to do automatic login and his breaks down.

  
  

  Now these blocked thread are at the origin of the problem to the server of the IOM. Can you please let us know how to fix the automatic connection failure. This error we get now on pre-production and prod env.

  
  

  We already checked Doc-ID 1554741.1 and it did not help.

  ==========

  28 - Sep - 2015 11:38:53 CEST > < WARNING > < JNDI > < BEA-050007 > < an attempt was made to search for the global resource without version 'tail' of a version of the application "IOM [Version = 11.1.2.0.0]. This can potentially cause conflicts the uses of the global resource among the multiple versions of the application. >

  < 2015 - sep - 28 11:38:55 CEST > < error > < OAM Autologin Logger > < BEA-000000 > < user login for the user with the new password apatilfailed! >

  < 2015 - sep - 28 11:38:55 CEST > < error > < OAM Autologin Logger > < BEA-000000 > < a mistake occurred during the autologin >

  < 2015 - sep - 28 11:38:55 CEST > < error > < oracle.iam > < BEA-000000 > < INTERNAL ERROR: Autologin is not oracle.iam.ui.platform.sso.exception.AutoLoginException: an error occurred during the autologin: >

  < 2015 - sep - 28 11:47:11 CEST > < error > < WebLogicServer > < BEA-000337 > < [STUCK] ExecuteThread: '23' for the queue: "weblogic.kernel.Default (self-adjusting)" has been occupied for the second "646" working on demand "Workmanager: OIMWorkManager, Version: 0, scheduled = true, Started = true, start time: 646695 ms.

  [

  POST /identity/faces/forgotpassword?_adf.ctrl-state=13nkdhhdjd_95 HTTP/1.1

  Accept: * / *.

  Content-Type: application/x-www-formulaires-urlencoded; Charset = UTF-8

  ADF-ads-Page-Id: 1

  ADF-Rich-Message: true

  Referer: https://app.example.com/identity/faces/forgotpassword?backUrl=https%3A%2F%2Fapp-ext.example.com%3A443%2Fportal_authentication_service%2Fappmanager%2Fmerportal%2Fdesktop%3F_nfpb%3Dtrue%26_pageLabel%3Dportals_testportal_portal_page_106&_afrWindowMode=0&_afrLoop=854893960595555&_adf.ctrl-state=13nkdhhdjd_95

  Accept-Language: en - us

  User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; Tablet PC 2.0)

  Content-Length: 387

  Cache-Control: no cache

  Cookie: _ga = GA1.3.569926938.1440583332; ADRUM_BTa = R:321 | g:35c2fc21 - b41e-486-ae9b-f798e1c55792; PRODUCER_AUTHENTICATION_SESSION = h5myWJXR1qNTqd2zdrT0Q2tjnTTylDVZGxXJWNrM6gGXwh7LPRCM! 1223761332; JSESSIONID = lQqKWJXSxyTHRmFyLgJnnTLWwGPwnyJ7tLGqPvZsdTN2bSSDTQNl! 1223761332; NSC_mc_wtsw_Hbcsjfm_Fyufsobm = ffffffff09801a3545525d5f4f58455e445a4a422851; UserAuthdOnce = false; oimjsessionid = GsGtWJJT811HQGRbDJnVG8pn9rFnvwQN4p2vzbLDjfkcbkLJvM95! 1835151121!-1745376563; _WL_AUTHCOOKIE_oimjsessionid = eOgy8ynWy25JFSqtsCKi; PRODUCER_DATASUBMISSIONCONTROLLER_SESSION = ST9QWJXHnkZHy1pph3J8WyB6TyhRVvytGL7ZcfWPVzTjyQ9YJHwQ! 1223761332; _WL_AUTHCOOKIE_PRODUCER_DATASUBMISSIONCONTROLLER_SESSION = Y2rWv5yus-r5AwOYDPFq; PRODUCER_ADMINISTRATIONCONTROLLER_SESSION = k23HWJXL1VDs9WgjHr5ymLFzyWZnmMrhsppfQF7FpYnCpwZYpg5j! 1223761332; _WL_AUTHCOOKIE_PRODUCER_ADMINISTRATIONCONTROLLER_SESSION = 2Eo-goTVYsO4IjpXgQSI; PRODUCER_SCHEDULEMANAGEMENTCONTROLLER_SESSION = 1hmKWJXL8p1ndMTnvv1mlx2yx8m6G07Z6ghBhThWjqhwdLBTfszG! 1223761332; _WL_AUTHCOOKIE_PRODUCER_SCHEDULEMANAGEMENTCONTROLLER_SESSION = L0d1pIFCXhc16jhsKUr6; OAMAuthnCookie_app.example.com:443=zld9urARI4HcsbQE%2FwPf3cx5hzeN6hfqUhcvyOpPy5q4aKpBbwKfrt9QqiRx9mvz2VfzGRx3mIEUeRuYFhfpj9oKon0pGTzo9DF9kSjbtF7UgDTK5fY2AgVkl0WE6I%2B%2Bn4eRBFX2NAit6tWmAvGjuDBs0jHUiY3gfHIlH3N1W0UcY33r1MTLn9vFCt0OjXclvwuQ6oplr8OSSlOE4Jhe3zFvrfzIPKOgsDL6PfK5iej6UIuGX5ZbYJLH%2BP6ikqfn218P5xKfFDd50iwBH8TVPU64HeOCqB5cp1LZCQNKdtb3EkTOAA%2BlHXB9eRyUVAXt; ADRUM_BT1 = R:321 | i: 74626

  IS_SSL: ssl

  Accept-encoding: identity

  ECID-background: 1.0058Cl4thyAEoIW5Tzp2ic0006ZG00000Z; kZjE1ZDLIPHLj9OP_UOTdKTUj6POZLRSj6RRmNRRoGTOnJVTjISP

  Connection: Keep-Alive

  X-Forwarded-For: 172.16.102.56

  Proxy-Client-IP: 10.136.4.253

  WebLogic-X-KeepAliveSecs: 30

  X WebLogic-request-ClusterInfo: true

  x weblogic-cluster-hash: LU + 8PjjXpmbjjPfOF4PNxp5znUw

  '] ", which is more than the time configured (StuckThreadMaxTime) of '600' seconds. Stack trace:

  NULL >

  < 2015 - sep - 28 11:47:11 CEST > < opinion > < Diagnostics > < BEA-320068 > < Watch "StuckThread" with severity "Notice" on the server "oim_server2" released on 28-Sep-2015 11:47:11 CEST. Details of the notification:

  WatchRuleType: Journal

  WatchRule: (SEVERITY = "Error") AND ((MSGID = ' WL-000337') OR (MSGID = "BEA-000337'"))

  WatchData: DATE = 28-Sep-2015 11:47:11 CEST SERVER = oim_server2 MESSAGE = [STUCK] ExecuteThread: '23' for the queue: "weblogic.kernel.Default (self-adjusting)" has been occupied for the second "646" working on demand "Workmanager: OIMWorkManager, Version: 0, scheduled = true, Started = true time, began: 646695 ms.

  [

  POST /identity/faces/forgotpassword?_adf.ctrl-state=13nkdhhdjd_95 HTTP/1.1

  Accept: * / *.

  Content-Type: application/x-www-formulaires-urlencoded; Charset = UTF-8

  ADF-ads-Page-Id: 1

  ADF-Rich-Message: true

  Referer: https://app.example.com/identity/faces/forgotpassword?backUrl=https%3A%2F%2Fapp-ext.example.com%3A443%2Fportal_authentication_service%2Fappmanager%2Fmerportal%2Fdesktop%3F_nfpb%3Dtrue%26_pageLabel%3Dportals_testportal_portal_page_106&_afrWindowMode=0&_afrLoop=854893960595555&_adf.ctrl-state=13nkdhhdjd_95

  Accept-Language: en - us

  User-Agent: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; Trident/5.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; Media Center PC 6.0; NET4.0C;. NET4.0E; Tablet PC 2.0)

  Content-Length: 387

  Cache-Control: no cache

  Cookie: _ga = GA1.3.569926938.1440583332; ADRUM_BTa = R:321 | g:35c2fc21 - b41e-486-ae9b-f798e1c55792; PRODUCER_AUTHENTICATION_SESSION = h5myWJXR1qNTqd2zdrT0Q2tjnTTylDVZGxXJWNrM6gGXwh7LPRCM! 1223761332; JSESSIONID = lQqKWJXSxyTHRmFyLgJnnTLWwGPwnyJ7tLGqPvZsdTN2bSSDTQNl! 1223761332; NSC_mc_wtsw_Hbcsjfm_Fyufsobm = ffffffff09801a3545525d5f4f58455e445a4a422851; UserAuthdOnce = false; oimjsessionid = GsGtWJJT811HQGRbDJnVG8pn9rFnvwQN4p2vzbLDjfkcbkLJvM95! 1835151121!-1745376563; _WL_AUTHCOOKIE_oimjsessionid = eOgy8ynWy25JFSqtsCKi; PRODUCER_DATASUBMISSIONCONTROLLER_SESSION = ST9QWJXHnkZHy1pph3J8WyB6TyhRVvytGL7ZcfWPVzTjyQ9YJHwQ! 1223761332; _WL_AUTHCOOKIE_PRODUCER_DATASUBMISSIONCONTROLLER_SESSION = Y2rWv5yus-r5AwOYDPFq; PRODUCER_ADMINISTRATIONCONTROLLER_SESSION = k23HWJXL1VDs9WgjHr5ymLFzyWZnmMrhsppfQF7FpYnCpwZYpg5j! 1223761332; _WL_AUTHCOOKIE_PRODUCER_ADMINISTRATIONCONTROLLER_SESSION = 2Eo-goTVYsO4IjpXgQSI; PRODUCER_SCHEDULEMANAGEMENTCONTROLLER_SESSION = 1hmKWJXL8p1ndMTnvv1mlx2yx8m6G07Z6ghBhThWjqhwdLBTfszG! 1223761332; _WL_AUTHCOOKIE_PRODUCER_SCHEDULEMANAGEMENTCONTROLLER_SESSION = L0d1pIFCXhc16jhsKUr6; OAMAuthnCookie_app.example.com:443=zld9urARI4HcsbQE%2FwPf3cx5hzeN6hfqUhcvyOpPy5q4aKpBbwKfrt9QqiRx9mvz2VfzGRx3mIEUeRuYFhfpj9oKon0pGTzo9DF9kSjbtF7UgDTK5fY2AgVkl0WE6I%2B%2Bn4eRBFX2NAit6tWmAvGjuDBs0jHUiY3gfHIlH3N1W0UcY33r1MTLn9vFCt0OjXclvwuQ6oplr8OSSlOE4Jhe3zFvrfzIPKOgsDL6PfK5iej6UIuGX5ZbYJLH%2BP6ikqfn218P5xKfFDd50iwBH8TVPU64HeOCqB5cp1LZCQNKdtb3EkTOAA%2BlHXB9eRyUVAXt; ADRUM_BT1 = R:321 | i: 74626

  IS_SSL: ssl

  Accept-encoding: identity

  ECID-background: 1.0058Cl4thyAEoIW5Tzp2ic0006ZG00000Z; kZjE1ZDLIPHLj9OP_UOTdKTUj6POZLRSj6RRmNRRoGTOnJVTjISP

  Connection: Keep-Alive

  X-Forwarded-For: 172.16.102.56

  Proxy-Client-IP: 10.136.4.253

  WebLogic-X-KeepAliveSecs: 30

  X WebLogic-request-ClusterInfo: true

  x weblogic-cluster-hash: LU + 8PjjXpmbjjPfOF4PNxp5znUw

  '] ", which is more than the time configured (StuckThreadMaxTime) of '600' seconds. Stack trace:

  NULL the subsystem = WebLogicServer USERID < WLS Kernel > = SEVERITY = error THREAD = ExecuteThread [ASSET]: '15' for queue: MSGID 'weblogic.kernel.Default (self-adjusting)' = BEA - 000337 TXID the CONTEXTID = 995a12fdb0c6819d:dfc9ad8:14fe162b9c5 = sd2oappzu10.fsa.gov.uk = MACHINE:-8000 - 00000000000 has 8221 TIMESTAMP = 1443437231754

  WatchAlarmType: AutomaticReset

  WatchAlarmResetPeriod: 600000

  >

  < 2015 - sep - 28 11:47:11 CEST > < emergency > < oracle.dfw.incident > < BEA-000000 > < incident 266 > created in "BEA-000337 [WebLogicServer]" key problem

  WebLogic Server Authentication with LDAP provider hangs intermittently (Doc ID 1436044.1)

  This solved!

• See Agent compatibility with W2008

  A lot of time since I am here all seems quite different to them. In any case, I have a view configuration when the server for connection etc was 3.1.2. These services a VDI environment site 3rd party but also I publish some servers of Terminal Server services. TS servers are W2008 R2 64 bit. They seem to work OK but the agent hangs intermittently and then within that server. What is the agent version 3.1.2 taken view supported with W2008 or do I need to upgrade the entire facility?

  Thanks in advance

  Thanks for reporting on your results.