Stupidity and the new cartridge - Officejet 4500 G510g model

Similar Questions

• Failure of the scanner, HP Officejet 4500 G510g-m

  Hello

  I have a HP Officejet 4500 device that cannot do anything requiring the scanner to work, including scanning, copying and faxing. The display shows meanings cannot be made due to a "Scanner failure".

  I tried troubleshooting (resettings the device and others) and they did not help. Here are the details:

  When I turn on the camera I have here a few mechanical noises (which is natural, it movesthe cartridges and all that) and then, at the end of the power process, the scanner lamp turns on and is moved one inch to the left along the surface scan (below it, in fact), then returns to its place in the extreme right and the error message is displayed.

  Device: HP Officejet 4500 G - 501g - m

  Mac OS X Snow Leopard (10.6.8), even with Windows 7 64 bit.

  Error message: "failed to scan. Unable to scan, copy or send a fax. Press OK. »

  No changes were made to the computer or the device, just, it began to arrive one day, a few months after the purchase of the unit.

  What can I do to fix this?

  Hello yonyz

  It looks like the printer may need maintenance. It must always be in warranty if its only a few months old. If you follow the link below, you can contact HP.

  Contact HP

• HP 5510 will be not printed black before and after you installed the new cartridge. the specified controls did.

  Photosmart HP 5510 will be not printed black before and after you installed the new cartridge.  The specified controls did.

  Yes, I was referring to manually clean the print head. I see that the 5510 lacks the possibility of leaving the print head manually.
  
  You can click on the menu of your SETUP program on your screen and go to TOOLS and clean the print head from there.
  
  If this does not resolve your problem, you may need to replace the print head.
  Contact HP Total Care (1800-474-6836), and if your unit is under warranty, its free.
  
  Let me know if this can help, thank you.

• OfficeJet 4500 G510g-m all-in - One series

  I have Windows 7 Home Premium 64-bit.

  Printer recently started feeding the slightly twisted paper. Top left margin is 1 inch, low page 7/8 in.

  This requires it a repair service or can do something to fix this problem?

  Hi ministerr,.

  Welcome to the HP Forums! I understand that your HP officejet 4500 G510g recently started to feed the slightly twisted paper. I'm happy to help with this problem!

  I would recommend going through this guide. Image or printed text is twisted or biased. If this does not work, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

  Hope this helps you and have a great day!

• Error while parsing - Officejet 4500 g510g-m

  I have Officejet 4500 g510g-m connected by USB to a Toshiba laptop that is running Windows 7.

  I got and error message "software HP is perhaps not able to scan the destination by default because the software is not available or does not work properly. When a scan of the printer is done using HP diagnostic every thing works fine if I get this error message.

  Over time I got the impression that I uninstalled the printer several times and reinstalled, this time when I always get the error scan and sometimes an other error message with error numbers 8, reinstalled [(6,0,-2417319779)] tells me to reinstall the software.

  I wonder if the problem with Windows updates. Between updates of Windows I can usually correct the error messages and the printer scanner works fine. This time, I can't solve the problem.

  trishred, good for a later use HP made all our software and drivers available through our Web site. Just save the link below and if you need to reinstall the printer on this computer or another just select your operating system and follow the download instructions.

  http://goo.GL/d0mVS

  I am happy that this solved!

• OfficeJet 4500 G510g: OfficeJet 4500 G510g will not print full page

  I'm having a problem that gets worse.  My OfficeJet 4500 G510g will not print a full page.  I have installed the latest updates, verified that it's the default printer, aligned the cartridges 2 or 3 times, cleaned the printheads of 2 or 3 times. but no success in getting it to print an entire page

  Hi @thrandall,

  Thanks for getting back to me.

  My suspicion was correct, there is a hardware problem with system of distribution of ink or cartridge.

  Have you tried these steps in my previous post?

• OfficeJet 4500 G510g: Impossible to uninstall HP Officejet 4500G510a-f (Windows 10)

  My Officejet 4500 G510g HP Solution Center opens not once 10 Windows worm 1511 was expelled 12/30/2015.  Windows KB3133431 update has been installed automatically on 06/01/2016 and who should have solved the problem, but he did not.  I uninstalled my HP software and I ran HP Support Assistant to download the current software for my printer, but that didn't fix the problem either.  I checked my HP programs in the control panel and found Officejet 4500 510a-f is installed.  But, Officejet 4500 510g-m is what I need.  I tried to install the software, g-m , without success.  I also tried to uninstall the software from a to f in the Panel, but could not do that either.  CCleaner comes with an uninstallation tool, but it also failed.  Can someone give me help on how to removie this software (Officejet 4500 510a-f) of a machine Windows 10?

  I was able to solve the problem.  I downloaded a free trial of 30 days of Revo Uninstaller Pro and with her, I was able to uninstall HP Officejet 4500G510a-f.  Once this is done, I managed to install the correct software for my printer.  HP Solution Center is back on my desktop and everything works as it should.

  Thanks again!

• HP Officejet 4500 G510g-m: displacement of fax line dedicated to sharing with phone line.

  I have a HP Officejet 4500 G510g-m all-in-One and Windows 7.  Never any problems.  In recent years, I have been fax from a dedicated line, separate from my regular telephone line.   I decided to save money and my phone line fax.  Other that simply move the fax line to a separate socket to the same wall jack as my phone and change the fax number box, is there anything else I should do?  I did not move the phone cord to a different port on the fax - should I?   I already ran a fax test and passed.

  Thanks for any info.

  9/29 - I just had a friend try to fax to me.  The phone rang and rang even if I set to 2 rings.  It's never logged and sent a fax.

  9/29 again - I have an answering machine.  I changed it to pick up to 4 fires and fax to pick up 6.  I had a friend try to fax, it has not been connected.    He received my faxesbut that I can't get any sound.

  Looks like the problem may very well be Vonage. Since I msgd you I found 6 people with the same problem and none of them have been solved. I'll have to give up and return to the dedicated fax.

  Thank you very much, Rich for all your help. It was a pleasure to work with you. It's just a pity that all your hard work has not solved the problem. But at least you know if someone else asks you for help with the same problem and they have Vonage, it's hopeless. Laughing out loud

  Bye!

• Work of WAN t HP Officejet 4500 G510g-m scanner

  Dear hp I cannot scan my wan't scanner HP Officejet 4500 G510g-m work what is the problem I press the scan button
  This time I can't see the disply no option analysis. Please refer to the documentation for the device to sharp shoot. Press ok pls reply me

  If you receive a message about no Scan Options, so it is possible that the software has not been activated for scanning with the printer.  Have you opened the Solution Center on the computer and tried to update the scanning to... settings in the settings tab at the bottom right of the window to the solution Center?

  So, have you tried running printing HP and doctor Scan?  It is an automated tool provided by HP for the many printing/scanning problems.  Click here to access the PSDr HP.

  I'd also take a look at the troubleshooting steps in the document located here.  I hope this helps.

• Impossible to install Officejet 4500 g510g-m driver for Win7-64

  When I try to install the downloaded file (OJ4500vG510g-m_Full_13_en) extracts the Officejet 4500 g510g-m dirver for Win7-64 bit, then a back screen flashes on the screen for a fraction of a second, then nothing else happens.

  Don't know what to do at this point.

  Thanks for the clarification.

  Please try following these steps and check if this may help:

  1 open the Mcafee Virus and Spyware Protection software you are interested in, click on calendar and perform analyses. Click analysis in real time, and then click stop. Select until I restart the PC and confirm by clicking the button turn off.
  2. open the dialog box run by clicking on the Windows key and the R key on your keyboard. Type %windir%, and then click OK.
  3. type hpoins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpoins1.old)
  4. type hpwins*.dat in the search bar at top, if there is that no result rename the extention in old instead of dat. (e.g. hpwins1.old)
  5. start the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC /Unregister. in the Run dialog box and click OK.
  6. launch the Run dialog box by clicking the Windows key and the R key on your keyboard. Type MSIEXEC/REGSERVER in the Run dialog box and click OK.
  7. run the installation file and check all difference.

  If the problem persists, right-click the computer icon and select manage, then open the Device Manager.

  Devote the processor category and specify which processor you use on your PC.

  Kind regards
  Shlomi

• OfficeJet 4500 G510g-m it not install correctly

  I have a printer all-in-one Officejet 4500 G510g-m. I tried to install & uninstall several times on A Dell 2.80 core dual processor

  with 2.50 GB of memory. With Windows Vista Home Premium 32 bit. Every time he tells me that I can't open the cause of box tool, that it is not connected... Printer, scanner and fax will appear on the control panel. Then, I made a full recovery on my PC and tried to install it again.

  It allows to print when you do a copy, page test and wordpad, but not from Windows photo gallery and will not let you check ink levels.

  How can I uninstall this thing and get out all the old files and get my right rear register. Also, how can I get this printer to work?

  Any help would be greatly appreciated.

  I did a microsoft Fix - it for windows tools, I ran a Revo Uninstall, then I did a disk cleanup.

  Then I reinstalled the drivers I downloaded from HP and the HP software. The complete program,

  Version 13.0. restarted the pc and it would not always print from windows photo gallery, but eventually, I went and bought a 3 feet for the printer usb cable and everything works fine now. I knew that when you scan, you have to scan my documents and then print it. Thanks a lot for your help.

• HP 5530 Envy: How to clean a leak before installing the new cartridge

  I haven't used my cartridge color for a long time, and now I see that the contacts are a little disordered (a few leaks). How can I clean before installing the new cartridge? Q-Tip and alcohol?

  Hi @PMarlene

  Just a non fluffy and distilled (or bottled) water works better...

  http://support.HP.com/us-en/product/HP-envy-5530-e-all-in-one-printer-series/5304881/document/c03743431/

  

• DeskJet 2132: Do not print with the new cartridge

  I bought this printer only about a month. I've exhausted the original black ink cartridge, so I bought a new one (genuine HP 63XL).

  I installed the new cartridge and the alignment page is printed, but only the parts of printing color, no black. I tried to print a test page, once again, not black. The ink level software shows that the new cartridge is full.

  I tried to put back the cartridge several times and made sure the protective film is removed completelu.

  I tried to remove the new cartridge to print mode single cartridge. The test page comes out fine; but, when I try to print a document in this way, the printer WILL NOT PRINT AT ALL. There is a little red light next to the black point near the power button.

  HI @saking88,

  Welcome to the Forums of HP Support!

  I see that you are unable to print black on your printer HP Deskjet 2132. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  It seems that there is a problem with the cartridge of the printer or print. This document should help you determine the cause. Please, try the steps in the guide below, to see if we can get the impression in black again for you.

  HP DeskJet printers 2130 - color or black ink print do not.

  This document is for HP DeskJet 2130, 2132, 2134, printers all-in-one Deskjet Ink Advantage 2135 2136 and 2138.

• After a small power surge (I installed a surge protector) my printer and his new cartridge dating back to one week only prints blank pages when I click on 'print '.

  After a small power surge (I installed a surge protector) my printer and its new cartridge dating a week began blabk pages to print

  Contact the technical support for the manfucaturer of the printer.

• the HP Color Laserjet 3800: HP 3800 will not recognize the new cartridge cyan

  I tried to put back several times, turn off print and on. No luck. I just ordered these toner cartridges and they arrived today. I'm a graphics on a tight schedule. Help!

  Well, the new cartridge arrived and I got the same message. I called the IT company I have dealt with 15 and told him about the problem. They sent a technician who inspected the receptacle for the cyan cartridge and with a flashlight and his right hand, explores every inch of the cavity. He drew his hand with a piece of black plastic no more than a quarter of an inch long. It's on the right side of the floor of the cavity, completely backward. When he reinserted the cyan cartridge and turned on the printer, MESSAGES of ERROR NO MORE! I am so relieved and so embarrassed at the same time where I couldn't find this little piece of plastic myself.

  Thanks again for trying to diagnose the problem.  You have been great!