Suddenly my dell D610 latitude does not recognize his dvd player/burner. That's happened?

Similar Questions

• I have a HP dv9620us Notebook PC, but it does not recognize the DVD player or CD player player?

  have tried everything I know to get the laptop to find and recognize the drive

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows Vista does not recognize my DVD player. It is a Pioneer DVD - RW DVR - 110 d ATA Device.

  I looked at the information system and noted that there is a device error.  After checking for a solution online, this is the message I got:

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 39.

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows 8 does not recognize my DVD player.

  I read all the suggestions given and I tried the over only once, but it does not always work. What should I do next?

  Hi Alma,.

  Please answer the following questions to help us get a better idea about the issue.

  1. What are the troubleshooting steps you have tried?

  2. Since when are you facing the issue?

  3. do you get an error message?

  Controls if the DVD drive works properly in the Device Manager.

  To do this, follow these steps:

  a a.. on the desktop, press the Windows key + R and type devmgmt.msc and press enter to open the Device Manager.

  b. expand CD-ROM/DVD-ROM drives and do a right-click on the driver.

  c. Select Properties , and then check to see if the device works properly under Device Status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there are some problems with it.

  Follow these methods and check.

  Method 1:

  I suggest you to run the hardware and devices Troubleshooter that will tell us the reason behind the question.

  Follow these steps to run the hardware and devices troubleshooter.

  a. press the Windows key + W and type Troubleshooting.

  b. Select Troubleshooting.

  c. Select show all in the upper left corner.

  d. run the convenience store hardware and devices.

  Method 2:

  I suggest to refer to the following article and follow the steps. This article has steps to add a registry key so that the operating system detects the DVD player.

  You can see that the DVD drive is not recognized in Windows 8

  http://blogs.technet.com/b/asiasupp/archive/2012/03/22/you-may-experience-that-DVD-drive-is-not-recognized-in-Windows-8.aspx

  Registry WARNING: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. Follow these steps to resume and restore the registry.

  a. go to start and type regedit.

  b. Select regedit and then right click on the screen.

  c. click on run as administrator.

  d. find and click on the key or the subkey that you want to back up.

  e. click on the file menu and then click export.

  f. in the area Save in , select the location where you want to save the backup copy to, and then type a name for the backup file in the file name box.

  g. click Save.

  Get back to us with the State of the question. We would be happy to help you.

• Why XP MODE does not recognize my DVD player?

  It shows my DVD player in the "D" drive, but this is false.  "D" drive is a partition on my hard drive.  In normal Windows 7 my DVD is 'G' drive but not in XP Mode.

  To access the content of your DVD in Windows XP Mode, open the drive mapped in Windows XP Mode network. She represented by the same drive as D on KENS-PC name

• XP does not recognize the DVD after burning them.

  I have a Pioneer DVD - RW DVR - 110 d. When I restart XP and open Windows Explorer recognizes the drive as a DVD one. But for some strange reason, when I insert a prerecorded DVD, Windows Explorer changes the designation of my drive as a CD drive and will not read my drive. It remains this way until I have restart XP. I can burn to DVD, but when it comes to their reading it won't. I thought that maybe there was some kind of hardware/software conflict, but even Mr. finest he could not find the problem. Short of re-installing XP, I don't no what else to do. All the suggestions/help? Thank you.

  When burning DVD on Windows XP, you may need the Microsoft patch available through this article:
    KB932716 - Description of the package to update API Mastering Image v2.0 (IMAPIv2.0) dated June 26, 2007

  In addition, this optical drive DVR - 110 d, also known by the Pioneer DVR-610 and the DVR-R100, has a firmware update available in the support web page Pioneer DVD computer writers .  There is updated firmware in question and a program to detect the current level of firmware.  There is a list of compatibility of optical media available in the documents and an overview of the drive section.  Note: you can often see drive firmware level in the chain of identification of device in the Device Manager.

  It should also read the pioneer article knowledge base: is an IDE cable / ATA of Ultra DMA (80 drivers) required for this willingness to work on my DVR - 110 d, DVR-R100, DVR - 610?

• After the update of DVD driver from Dell, my PC does not recognize the drive at all the

  Hi, I've updated my DVD burner on the Dell Web site (he said it was important), but since then, my computer does not recognize my dvd player at all. I click on "drivers" and the system finds it online. A halfway through the installation, I get an error code, and it says "Roxio pxhelp is missing" I don't have any Roxio software on my computer! Need help with getting my dvd drive working properly! Thanks in advance =)

  Original title; DVD writer not installed!

  Try following the steps under "Windows 7 or Windows Vista" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• My Dell laptop does not recognize the DVD / CD player or D drive more.

  My laptop does not recognize the DVD / CD player or D drive more. It is built in and included with the computer is a Dell. Can't use it because the computer can't find it. All ideas

  Original title: DVD player

  If it just happened all of a sudden, you can restore the registry files of the system in working order by following option n ° 1 on this page.  If this does not work, you can be reasonably sure that the configuration of the system is not the problem and start looking into other possibilities as a broken drive or a bad connection inside the cable.

• All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122.

  New error message to see article 871122

  All of a sudden, my dell inspiron 6000 does not connect to the internet and has an error message to see article 871122. That's happened? I used it last night to check my email, and then I deleted some photos on the disk hard and this morning it will not connect. I don't really understand what happened to him because it was off last night.

  Hello

  1. you are using a wireless connection?

  If you are using a wireless connection, I suggest you to update the latest drivers for the network adapter and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check this link for troubleshooting steps:
  http://support.Microsoft.com/kb/314095

  It will be useful.

• My reading and writing system does not recognize the DVD. For this CD. I don't know why.

  For a long time my system CD/DVD in my laptop Del Estudio 1537 worked perfect. But all of a sudden my computer does not recognize or read or burn DVDs. Can you help me fix this problem?

  Hello

  You have disk problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). So it is not unusual for parts from 1 or 2 to not work so that others do
  correctly.

  Burning at low speed, or by using the master could help. A CD/DVD cleaner might help.

  Brand of the CD or DVD drive can also be the problem. Low quality (cheap brands) are always problematic.

  CD/DVDs have a tolerance + - and your can read/write on the edge outside these discs
  tolerances. They may be delivered, but it is generally more economical to replace the disk.

  Several good info here:
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ===========================================

  This troubleshooting could not help if there is alignment and/or wear issues however it
  a shot.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• Windows does not recognize the DVD drive at startup

  Laptop: Dell E6410 ATG wt / verzion A15 Bios

  OS: Windows 7 SP1 with the latest updates.

  The question I have is when I log on Windows 7, the laptop does not recognize the DVD drive. The reader will not be displayed in my computer or Device Manager. I can get around this physically ejecting the disc and reinsert. If I do this drive appears in my computer Windows and Device Manager. It will read DVDs and CDs fine. I am able to reproduce the problem above mentioned question if I restart the laptop. If I restart the laptop the DVD drive won't be recognized and reinsert the drive will get it appears again.

  This problem occurs if I try a DVD - RW drive and an old DVD - ROM drive. If I go into the BIOS before windows, I can see the BIOS recognizing drives ok but not when initially get into Windows without having to eject and inserting the disc.

  Thanks in advance for any help.

  I guess that this must be a hardware problem then.

  Seems odd.

  The only other thing I can think of, after reinstalling W7, is a BIOS problem eventually. A strange setting it may be an older version of BIOS with a bug in it. If you decide to update the bios, make sure that you get the latest version for your make and model PC and follow the instructions. You can destroy a PC with bad BIOS or update the procedure.

• Windows7 dvd creation does not recognize my dvd burner

  I have windows 7 pre-installed on a computer inspiron dell less than 2 years.
  Create DVD does not recognize my DVD burner. Roxio, and DVD Styler.
  Also, in the computer, the dvd drive is not listed in the left side, but he is on the right side.

  Hi Luboceric,

  Thanks for the reply.

  I suggest you to update the drivers from cd/dvd and check the status.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  You can also uninstall the driver and reinstall the driver to check the status. You must contact the manufacturer of the computer for the driver updated and appropriate.

  Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  Thank you.

• Power mac g4 does not recognize the DVD/CD drive.  It has worked very well in Leapard

  I just newly installed Tiger on my PowerMac G4, and now it does not recognize the DVD/CD drive.  I did all the updates and it does not see the DVD in the DVD drive.  It works perfectly before a new clean install DVD of the Tiger.

  What is your indication that the DVD is not recognized?

  Run the utility disc with the disc in the optical drive.  The drive will appear in the sidebar of disk utility?

  I did all the updates and it does not see the DVD in the DVD drive.

  If you put another type of disc in the optical drive, as a music CD, it is recognized?

• Qosmio G40 does not recognize CD/DVD

  Qosmio G40 does not recognize CD/DVD, or sometimes it reads some DVD or CD. But it does not burn.
  Once I managed to burn, but could not be able to read the CD.

  All the world is facing this problem?
  What would be your suggestions?

  Thanks in advance

  Hello

  This isn't a real problem.
  These problems can occur using incompatible media or not fully supported.
  I had this problem too. You wouldn't believe how many CD or DVD I used to know what media would be fine.

  Finally I went to TDK's and for a long time I m really satisfied.

  By the way; User manual you should provide some useful details on the compatible media. Check also.

  Good bye

• I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D

  Original title: DVD problems

  I have an acer with SP3 and Windows XP machine. It does not recognize a DVD - RW in my TSST Corp. CD/DVGW TS - L632D what is the solution. I tried the fix and I also used the Center 'Fix it '.

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?
  3 are. what patch you referring?
  4. this happens to you with some specific discs?

  Reinstall the drivers for DVD player and check.

  1. click on start > run
  2 type devmgmt.msc and press ENTER. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  3. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.
  4. When you are prompted to confirm that you want to remove the device, click OK.
  5 restart the computer.
  6. when the computer restarts, the drivers will be installed automatically.