Synaptics touchpad issues after update driver

Similar Questions

• X 360 13-4101dx spectrum: spectrum x 360 (13-4101dx) Synaptics Touchpad issue

  Hello, I just bought a new spectrum x 360 (13-4101dx), preloaded with Windows 10 and I have problems with the Synaptics touchpad. After an update of Windows, the driver has been updated to version 19.0.12.95.  I have a reverse scrolling disabled, but for some applications, the two fingers scrolling is always reversed. Applications like Google Chrome and Device Manager are working fine, reverse scrolling is disabled. However, for applications like Windows, Microsoft Edge settings and practically everything related to Windows, it seems to be reversed at all times. In addition, whenever I restart my laptop, all parameters returned to default.

  Now, on my HP Envy 15-j000, I have the same driver (19.0.12.95) and that I encounter the same problems with being "permanent" reverse scrolling on Windows-related applications. However, the settings still restarts after every reboot.

  How can I fix? Synaptics will publish a fixed driver for this or am I just missing something? I hate the reverse scrolling and only a small handful of my applications actually traveled with this option disabled.

  I have this same problem with my HP OMEN using the 19.0.12.95 driver, windows update says that it is the latest version of the driver. Scrolling is reversed in some applications/settings.

  I fixed this problem by going back to an older driver (18.1.30.2), the scrolling is now uniform. A little annoying that I had to fix this way, but I had to go to the drivers/HP Omen support page and download the driver for the synaptics touchpad (even if the HP website insist that use Windows update for Windows 10). I had to then install the old driver, go into Device Manager and do back the driver to 18.1.30.2 - win 10 will use the latest driver unless you do this. After that you can change the setting in the settings of the synaptics clickpad, and it will be uniform. This is what worked for me.

• HP Probook T3L12UT #ABA G3 450: Audio driver issues after update of Windows 10 anniversary

  After upgrading the operating system Windows (10.0.14393), Conexant driver failed. No device installed. Also in the Device Manager, Intel High Definition Audio is missing a driver. Cannot find a copy (grouped with another driver... video perhaps).

  In any case, fixed the problem of driver Conexant by completely uninstall Conexant Audio ISST and re-install.

  Now, my only problem is that the audio does not turn off to a HD TV plugged into the HDMI port. Video is fine, but no sound. HDMI does not show well in Audio devices.

  Any ideas? HDMI port connected to the Intel High Definition Audio device?

  The device for the device ID Intel HD Audio are:

  INTELAUDIO\FUNC_01 & VEN_8086 & DEV_2809 & SUBSYS_80860101 & REV_1000
  INTELAUDIO\FUNC_01, VEN_8086 & DEV_2809 & SUBSYS_80860101

  Thank you

  Ed ski

  Hello:

  Yes, the Intel HD audio device that needs the Intel graphics driver reinstalled.

  I propose this option to install the driver, because sometimes simply reinstall the graphics driver Intel does not work.

  Download and install this free utility for files.  The file 2nd on the list is 64-bit.

  http://www.7-zip.org/

  After installing 7 - Zip, download and save, but do not run this driver Intel graphics from the support page of your laptop.

  This package provides the Intel video drivers, control panel and display audio driver for the laptop models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp75501-76000/sp75984.exe

  After you download the file of the graphics driver, right-click on it and select 7 - zip from the list.

  Have 7-Zip extract of: and leave it to decompress the file in the file name (sp75984).

  When this is done, go to Device Manager and click on the Intel HDMI audio device problem requiring the driver.

  Click the driver tab.

  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver 7-Zip created folder.

  Make sure that the include subfolders is selected and the driver should install.

  Then restart the PC, and you should be able to get audio and video from the HDMI connection.

• Synaptics Touchpad and Pointing Device Driver missing on Satellite A200?

  Hey,.

  I received a notification of upgrade on the touchpad synaptics installed on my laptop A200 - 1 m 4 and after I installed that the touchpad respond well, so I rolled back the driver, but he wouldn't use the scroll option. I reinstalled the driver again, but still I couldn't use the scroll function.

  On the icon in the taskbar, when I want to see the chart pressue accessory it gives me this msg * sorry, this program requires a Synaptics TouchPad, and the Synaptics pointing Device Driver * I miss him the 2nd can't so anyone made me know where I can find the installer for it.

  Thank you very much in advance,
  LEEN

  Hello

  Satellite A200 - 1 M 4 belongs to the series of PSAE0E and you choose this serial number for a driver download.

  On the European driver Toshiba page you will find the * Alps Electric Touch Pad driver *. (This driver allows you to set the properties and functions of mouse control) and
  the * Synaptics Touchpad driver * (this driver allows you to set the properties and the touch pad control functions).

  Both must be installed!

  If that doesn't help then try to roll back the BONE to this early time (until you've updated the driver for the first time)

  Good bye

• Satellite T100-107 - after update driver, I can't use Bluetooth

  Satellite T100-107/getting updated driver killing Bluetooth windows 7 64 bit running.

  Started toward the top of my new laptop, did all the microsoft and Toshiba updates and bluetooth does not work.
  So I did a reinstall of the hard drive to the top, did all the updates and got the same result... bluetooth sees devices, but does not connect.
  I have read all the threads here, no solutions. I messed with the settings, tried 4 different devices (mouse, telephone, headset another laptop); no difference. More rolled back a lot of pilots.

  Then I reinstalled from the hard drive again once does no update at all and all devices are now connected
  BUT, of course, I need to make updates.
  If anyone has any advice on which you could give me this question?
  If this isn't the case, I'll have to do each update singularly and check that I can always connect via bluetooth.

  + Thanks for reading XX +.

  Hello

  Have you tried to reinstall the new BT stack, after doing the update in Win 7?

  The new BT stack can be found here:
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• Laptop HP 15-af122no: crash at startup after update driver AMD

  I bought my computer on February 2016, so it is quite new. There are 10 Windows ready and recently it has been upgraded. My internet connection LAN, no problems with that.

  Yesterday an automatic detection of AMD system informed me that my drivers need to be modernised and I gave her permission to upgrade, maybe that has been my biggest fault... After that I needed to restart the system, and I did. The computer started showing strange texts on the screen, I remember that one word from him, it was at the end of the first line: "watchdog". After that the text of HP showed and freezes on the screen. I tried to start the second time, the result was the same. Third time the texts initially showed no more, but the start crashed on HP display.

  I am now on a computer it's not me and I tried to get help for this problem to the Support HP Finland, since I can't use HP Support Assistant on my HP. I found a few tips I've tried:

  -J' removed the battery and the power cord, but it did not help

  -After starting the computer, I pressed ESC several times to get in safe mode. Finally I got to a mode where I could enter a few commands (unfortunately I do not remember more..), but it does not give me the result I was expecting (and said what page of support must be the result). The computer said that it does not find these batch files requested.

  I'm really sad that I have had no money to buy a proper memory stick or cd to make the stick recovery or discs... NOW, they may be needed.

  I've been thinking about resetting the computer, but there could be some risk, too... Please, please, help me, I don't know what to do anymore. I hope you find a solution to solve this problem, thank you already!

  Hi there @Troublefinder,

  Thank you for joining the Forums HP's Support and welcome! You have just a great place to ask questions, find solutions and get help from others in the community. I understand that once you had done a update driver and recently upgraded to level to Windows 10, now your HP for laptop - 15-af122no (ENERGY STAR) is not allowing you to start correctly.

  Please note , remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Are you blocking upward at the HP Logo?

  Have you tried a hard reset?

  Have you tried to Test for hardware failures?

  Are - that you receive error messages or error codes?

  You happen to see a blue screen to choose an Option at all?

  If the computer hangs at the HP logo screen, try to clean the vents from the computer to the air and then restarting the laptop.

  Follow these steps to remove and reinsert the memory modules for troubleshooting:

• HP Color Laser Jet Pro M452dw: no automatic duplexing after update driver

  Installed the updated driver and software M452dw.  I can't print any documents usng the automatic duplex function.  I changed the printer properties from one side of 2 sides, but the feature screen always manual duplex printing.  I have been using automatic duplex printing since I bought the printer in November 2015.  Something must have gone wrong with the update or it does not update correctly.  Suggestions are welcome and/or corrective action to fix the configuration.

  You will need to go to devices and printers and right click on the printer icon and scroll first and left click Properties. Now at the top of the page click on device settings and then scroll down to the duplex of change not installed and installable options at installed and apply and save the settings and it should now work as you wish.

• Satellite U400 - PSU40E Synaptics touchpad problem after the recent update to BIOS

  Toshiba welcome,

  I've tested this in reverse, this is why the statement in the subject as it looks. After upgrading the bios of 3.00 to 3.50 touchpad loses its precision. Very rude and useless its like that.

  I tried different drivers, everything, but the only way to really solve this problem was it downgrade to 3.00 OR uninstall the driver Synaptics completely. Second solution, unfortunately, is unacceptable, because then I lose some features, like click on contact, which I don't use and control.

  Best regards

  Wojtek

  Hey Buddy

  I U400 and the BIOS has been updated to the newest one.
  The touchpad works like a dream. I m using Win XP and Vista and there is NO problems after BIOS update!

  In your case, this may be only a software problem and I think you can use the Toshiba Recovery disk and could reinstall the whole OS from the Toshiba drive

  It is a really radical solution because the whole HARD disk may be formatted, but if the resettlement of these two drivers touchpad didn t help then I think this would be the last solution.

• Acer Aspire 5560 Dolby Advanced Audio driver issues after updating to Windows 10

  Hello

  I have an Acer Aspire 5560. I've updated to Windows 10 and now I am getting up the following message is displayed at startup.

  The current Dolby audio driver is 7.2.8000.17 and the software application expects that the version of the driver 7.2.700.7. Please install a valid combination of pilot application and software.

  Can any help with a fix for this?

  Try this drivers too:

  http://station-drivers.com/index.php/downloads/func-startdown/1591/

  100% trusted Web site.

  Double click on the exe and then the extracted folder, find setup.exe and run it.

• Satellite A300-1AL - keyboard and touchpad issues after change of OS

  Hello

  I'm looking for suggestions or ideas how to deal with the problem of keyboard and the touchpad, which occurred just after I installed the new operating system. I changed from Windows Vista to Windows 7 and my keyboard and touchpad become inactive after a few minutes of starting the system. It is not serious if I write something or not, the unit works for a short time, then turn off automatically. I tried to find updates the driver but failed to come through what might be the solution. It is difficult to work with the screen keyboard so I hope that you will be able to help me.

  Thank you in advance,
  perkit

  I have Satellite A300-1LI and I installed clean Win7 32-bit using the Microsoft installation disc and all devices are working properly including the keyboard and the touchpad.

  Have you installed Win7 upgrade or clean the Win7 version?
  Have you used Microsoft installation CD?
  In General, keyboard and touchpad must work without any additional driver.

• BSOD issues after update 8.1

  My computer has no problems with Windows 8.0.  After the Windows 8.1 update, the system will BSOD crash leave once all the hours to once every few minutes.  I didn't notice all patterns on the block;. It is not obviously related to the execution of any piece of software. Often, the error message is different from the previous.  Some I've seen include:

  • Structure criticizes Corruption
  • Kernel security check failed
  • Memory management
  • IPF in nonpaged area
  • Unhandled Thread Exception system
  • Attempt to write to Readonly memory

  The research I've done has led to assume that it is a driver issue, but I am not sure. Today, the computer has to reset several times without warning and without displaying any error messages at all.  How can I get to the bottom of what's going on and solve the problem?  Any help would be greatly appreciated. Thank you!

  Thanks for the information.

  Your RAM is faulty and must be replaced.

  Kind regards

  Patrick

• Start-up and white screen issue after updating to v10.11.5?

  I can't say 100% that my problems are related to the last update, but I thought I'd ask.

  I've updated about 4 or 5 days ago, and although the questions did not begin immediately, they start after the update. It should be noted that I have never had issues like this before.

  Here are some of my questions on my MacBook Pro (17 inch, early 2011), 2.2 GHz Intel Core i7, 8 GB at 1333 MHz DDR3, Intel HD 3000 512 MB graphics card

  1. the monitor will sometimes go haywire and a strange split, screen where the mouse can go to the left side of the screen and reappear on the right side of the screen, because the office is now split into two

  2. computer crashes and the monitor starts flashing to show a blue zigzag striped background

  3 freeze during startup and never restart computer. Occasionally, it will start very well, but the computer locks upwards at some point while using

  4 computer at boot flashing out to a white screen then restart never

  Thanks for any help.

  Now I'm starting to think my problems are related to a single user, sign in. Only 2 people use the computer and my connection seems to be fine. No crashes or anything like that.

  The problems start when my wife logs in to his user account.

  Thought I would mention it.

  Any help/response would be appreciated.

• Qosmio F30-147 - no sound after update driver

  Hello

  you I ve a problem with my qosmio f30-147 running with the 32-bit version of windows 7.

  Recently, I wanted to upgrade my Codec driver SigmaTel HD audio a former pilot XP to a latest driver I ve Vista that is on the internet. But after the reboot, there is no noise at all and my windows tells me that couldn t he read the driver for SigmaTel. Then I reinstalled the new driver and installed again the old XP driver (again found on the internet). SAME PROBLEM! Now it s not even working with the old driver... someone knows what evil? I have can´t NOTHING on google or elsewhere, West found no official Site of Sigmatel and there is no sigmatel drivers on the toshiba site. Please help me I need my sound as quickly as possible without having to reinstall the system.

  hosts of the Germany, sry for my English untrained! Help, please!

  Hey,.

  This strange but may s I ask you why you updated audio driver? Have you had problems with this older version?

  Anyway, in your case I would try to restore the system to a point. Usually this should restore the previous version of the driver, and the noise should start working again.

  Check this box!

• Pavilion G6 2342dx, Wifi works does not after update driver recommended

  Hello. I have Pavilion G6 2342dx running Windows 8. Yesterday, I used HP support assistant to perform some recommended driver updates. Among the things to day was the device of Qualcomm Atheros Wifi driver and the driver of HP wireless button. Peripheral installed WIFI was 10... 222, 10... 212.

  After the update, my laptop cannot detect any wifi network. This shows simply 'no detected networks.' I also noticed that the light on the button wifi (F12) is always white If yes or no I activate flight mode or not. I get a message on the screen of property on the change in status of airplane mode. However, it doesn't seem to be actually toggle the wifi because of the sidebar, it looks like wifi is on but with the message "no media detected" persistent. In addition, wifi on the status bar icon is grayed out with a red x.

  I tried deactivating and activating the adapter without success. I tried to download and reinstall the driver (10... 212) with no luck. I even tried to disable, uninstall and then reinstall the device in Device Manager. System restore fails whenever I have it try. Interestingly, the last driver on the HP support Web site is the 212, no mention of the 222 pilot.

  Everyone has experienced the same? I would really appreaciate help on what I am completely stuck.

  Hi @futoji,

  Thanks for all the help. I finally resorted when you run the upgrade to Windows 8.1 and that seemed to take care of the problem.

• Satellite A100 - 192 (PSAA9E) FN + F8 key does not work after update driver BT

  I have just download the update of "blt-mon-20071009150856" Bluetooth driver and install the driver "BtMon2Inst_v212" on my A100 - 192 (PSAA9E). After installing the driver 'Toshiba Bluetooth 4' BT works very well.

  BUT I can't use wireless (FN + F8) key to switch between Bluetooth and the wireless device. I can disable/enable them from the control panel or the utility ConfigFree.

  No idea how to bring back the FN key?

  TNX.

  Hello

  I assume the ordinary models don t work properly.
  You must download this tool from Toshiba page and reinstall it on the XP operating system running.

  Please report if the common modules tool has solved this problem!

  Best regards