Table of Flashback and the movement of the line!

Similar Questions

• Table of clusters and the cluster is a bar counter, how can I change the color individually?

  Table of clusters and the cluster is a bar counter, how do I change the color of the bar individual meter for each element of the array?  I just realized that you cannot change the properties of an element of the array without changing everything.  For scale, I had to make digital for each graduation of the scale indicators so that each measure meter in the table in the cluster has individual scales.  I also had to do some calculations for each barmeter to display the correct proportions of 0 to 100% on the scale.  Now, I'm stumped on the color of the bar counter.  Basically, if the value exceeds a set value, the meter bar should turn red.  It must be in a table to be infinitely scalable.

  Thank you

  Matt

  And yet anothr approach...

  Right click on the bar of > Options to fill > maximum fill.

  

  The fill color of the same color as the background color, then make the background color transparent.

  Drop a box of color BEHIND the bar and the size correctly.

  He has this strange background 3D with flat bar, but what the Hey, his relatives. If its important a custom color box.

  Ben

• All my data have doubled and the lines are slightly compensation and overlapping. Unusable.

  All my data have doubled and the lines are slightly compensation and overlapping. Unusable. How to restore the distorted view course content?

  Hello Arnold,.

  A screenshot of the upper-left corner of your document could help the issue. Include as much as in the example below.

  If this section of the table does not display data "doubled and shifted", provide a second screenshot of a section of the same size, showing a sample of the data in question.

  Kind regards

  Barry

• Zoom in the photo and the line at the same time?

  So, I accomplished the ability to zoom in/out of an image on the front panel, with user input. And I discovered separately how to programmatically create a line in the block diagram with draw several Lines.vi, and it appears on the front panel to run. But now, I'd like to combine the two so that I have a photo zoomable on the front panel that has even a coded line that is simultaneously zoomed on at the same time as the picture. You know, so that zoom is the same for the image and the line and the line is always proportional to the same place on the image as it was before zooming.

  For now, I tried to stack the line with the image, but it's no dice. The line appears and is zoomable in front, but the image disappears. I would like to have visible both with line ontop of photo and zoomable by the zoom control switch.

  I have screenshots of the block diagram and façade below.

  Your Dãaaaaaa:

  

  (Must be added the image before the line, the line is on top...)

• Text and the line spacing in EP 14?

  EP 10-14 passing. Where is the manual setting of the text and the line space in the Titler?

  Premiere Elements does not attack or the spacing setting.

• I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good

  I'm retouching of images taken on my iPhone 6 more with Photoshop CS6. I'm doing my color correction and add effects and all that. Before you export the image I review and be sure to what I has no more sharpness and the lines are smooth and it looks good overall. I export it to JPEG, max quality with the establishment of reference standards. I then open the image and it seems fine, as it did in photoshop. My problems begin to occur when I try to download on Twitter as my profile picture. I tried downloading from my office directly on the site via google chrome. When I download the image then begins to have jagged edges and overlooks the tablets. So I thought it was some performance settings, then I tweaked them and restarted a couple of times and still the same result. He would go on my desk but when uploaded to twitter as my profile picture is horrible. So I tried emailing the image of myself and the download through my phone. I opened the image on my iphone and it seemed fine as he did on my desktop but when I downloaded the image it makes then look blurry. I had this problem when downloading photos Twitter via my iphone, so it doesn't surprise me. I have read different forums saying: you must download it from the office, so I thought it would work like this. This could be a problem of twitter than compresses uploaded photos? Other people can do very much the same way, but it does not work for me. Please someone help me before I put my computer in an oven microwave.

  This could be a problem of twitter than compresses uploaded photos?

  Yes. The rest, we can answer. You wrote a lot, but very little discussion. Instead of accurate information you lose yourself in the vague descriptions. Screw color management to the wrong dimensions that trigger resizing server-side it could be any number of things here.

  Mylenium

• I XI Acrobat pro, under comment > markup drawing the cloud, the polygon, gum and the line connect do not work. Eraser is visible, the rest are hidden a bit. all solutions?

  I XI Acrobat pro, under comment > markup drawing the cloud, the polygon, gum and the line connect do not work. Eraser is visible, the rest are hidden a bit. all solutions?

  You must disable the Touch Mode, with the toolbar button or the preference of the user: Edit > preferences > General > Mode Touch > never

• Problem finding tables of project and the repository working interface

  Hello

  Under a project (p. ex. - customer_m_table), with two interfaces (cust_regular and cust_special) and a package (cust_m).

  In working repository schema I had the table (snp_session) to the interface where I get the session Id, interface ran, etc...

  There is an even project table giving details of the project as the project name (snp_project).

  But is there any table where I can get information as part of a project, what are interfaces and what are packages?

  Thank you.

  Hello

  You can see how ODI under table SNP_TRT

  Select the RPD. Project_name, SF. Folder_name, SPA. PACK_NAME, SP.pop_name, P.TRT_NAME

  Of

  ODEV91119_ODI_WORK. SNP_POP SP,

  ODEV91119_ODI_WORK. SNP_folder SF,

  ODEV91119_ODI_WORK.snp_project RPD,

  ODEV91119_ODI_WORK.snp_package SPA,

  ODEV91119_ODI_WORK. SNP_TRT P

  where

  RPD. I_PROJECT = SF. I_PROJECT AND

  PFM I_FOLDER = SP. I_FOLDER AND

  PPM I_FOLDER = SPA. I_FOLDER AND

  PFM I_FOLDER = P.I_FOLDER

  AND RPD. I_PROJECT = 2010

  and spa.i_package = 3010

  If you're ok with this, please mark as correct or useful

  Thank you

• Function table in pipeline and the key-preservation - (ORA-01779)

  Hey oraclers,
  
  If I had to use a function table in the pipeline to cover complex application logic, I rarely update a subset of...
  
  (simplified example)
  

  create type derived_t as object ( key integer, value varchar2(100) );
  create type derived_tc as table of result_t;
  
  create or replace function new_derivations( p_param varchar2 ) return derived_tc pipelined
  is
    l_derived derived_t;
  begin
   
    loop
      /* do stuff here */
      .....
      pipe row( l_derived );
    end loop;
  return;
  end;
  /
  
  create table derivations
  as 
  ( 
    key integer primary key,
    value varchar2(100)
  );
  
  
  insert into derivations select t.* from table( cast( new_derivations( 'test' ) as derived_tc ) ) t;

  But when I try...
  

  update ( 
     select d.rowid,
              d.key,
              d.value,
              t.value new_value
     from   derivations d,
              table( cast( new_derivations( 'test' ) as derived_tc ) ) t
     where d.key = t.key 
     and     d.key between :low_key and :high_key
  )
    set value = new_value;

  I get ORA-01779: cannot modify a column that is mapped to a table not preserved key...
  
  OK... so reading around us need to be able to tell Oracle that each row in the result set view is preserved key - the 'key' of derivations from the table column and the column "key" to the result of the function in the pipeline are unique (and compatible).
  
  Is it possible to hint Oracle (11.2.0.2.0 on Windows) to achieve this?
  
  Thanks muchly,.
  
  Lachlan Pitts

  You can rewrite this kind of update in a MERGE statement statement, which I think does not suffer the problem you are experiencing:

  merge into derivations d
  using (select t.key, t.value new_value from table( cast( new_derivations( 'test' ) as derived_tc ) ) t) s
  on (d.key = s.key and d.key between :low_key and :high_key)
  when matched then update set d.value = t.new_value
  

  (Not checked for syntax errors)

  You can also watch this:
  http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:760068400346785797

  Published by: Toon Koppelaars February 8, 2011 05:40

• A table does not remove the lines

  I created a tabular presentation. I select one or more lines with the line selector. I click the button Delete and you get a warning/confirmation message. I select OK, then refresh the page. I selected the lines are always present.

  I edited the multi-rang button - remove and found that Action of database has been set no Action database, so I changed it to Action SQL DELETE.

  Still not delete.

  What Miss me?

  Hi mdwyer,.

  I edited the multi-rang button - remove and found that Action of database has been set no Action database, so I changed it to Action SQL DELETE.

  No need for the modification of database SQL DELETE action Action, it is correct with no Action from the database.

  I created a tabular presentation. I select one or more lines with the line selector. I click the button Delete and you get a warning/confirmation message. I select OK, then refresh the page. I selected the lines are always present.

  1. check that the request after clicking on delete...

  For example

  JavaScript:apex.confirm (htmldb_delete_message, 'MULTI_ROW_DELETE');

  Here MULTI_ROW_DELETE is passing as request.

  2. change your ApplyMRD process and check the status

  When you press the button: no condition button

  Condition type: request = Expression1

  Expression 1: MULTI_ROW_DELETE

  Check the request that you place the button Delete is same as a condition of the terms of the Expression 1 or not.

  Or better, you can create examples on apex.oracle.com, which helps the user to study and solved the problem.

  If your problem still persists, then try to recreate the form of tables and check.

  Hope this helps you,

  Reg

• Add filter slot table form to show the lines with null values

  Hello
  
  I have a tabular presentation where we need to add a filter with two values (selection list) so that if one of the columns in a table (column1) is zero, then I need to display all records where column1 is null.
  
  I was wondering how do I put this in the Source of tabular forms where condition. This filter has only two values,
  
  All the
  NULL for the error
  
  So when the user selects all, then all the records in the table are shown
  If the user selects 'Value Null in error', while the records where Column1 is null will be shown
  
  For example
  

   column1        column2
                         A
                         B
        1               C
        3               D
   

  If the user selects, then
  
  all four files will show up. Else, only the first and the second will be returned.
  
  Thank you

  Hi, Ryan.

  Try a static LOV like this

  STATIC2:;,--- All ---;--- All ---
  

  and a Where clause, like this

  where column1 is null or :p1_filter like '%%'
  

  Jeff

• SUMIF line is equal to the value of test and the line below is '-'

  Hello

  I have a spreadsheet numbers where a column has a list of names that are mixed with rehearsals and another column that has a value of profits to this name list.

  Now, I want to determine the total profits from each of the names so I can see the total profit by name.

  That part is easy, I just a SUMIF function that checks if the name corresponds to a specific name, and then adds the benefit altogether.

  The problem I have is that in the names column, sometimes I'll have a name and then the next rows are just '-' indicating that they are of the same name. The SUMIF function that I use does not takes into account these values because they obviously do not match the name of the interest.

  So my question is: is it possible to create a function that will check for a matching name and then if the next line '-', then add this value to the total as well. It has to work with several rows of '-' after the name.

  The screenshot below is an example of what I mean because I realize that it does not have much sense.

  

  So in this case, the total of Jess profit would be = 5 + 35 + 15 + 5 + 15 = 75

  and the benefit of Gill = 30 + 30 + 20 + 40 = 120

  I hope I did it is clear enough. Thank you in advance!

  Oscar

  Hi Oscar,.

  Although it is possible to do, it will be a little clumsy, involving additional columns. It would be much easier to stop using the "-" and use the actual names instead. Order the popup format to create a list that makes it easy to list the names.

  Quinn

• I have updated, but how do the awesome bar and the line at home to show?

  Miss me the line having the awesome bar and the Home icon.
  How can I get this crucial line?

  I've updated to the new version and here is the result.

  Make sure the toolbars like the toolbar 'Navigation' and the 'personal bar' are visible: "view > toolbars".

  • Is he missing elements then open the window customize via "view > toolbars > customize" or "Firefox > Options > toolbars»
  • If a missing element is located in the toolbar palette and then bring her back in the window customize the toolbar
  • If you don't see an item on a toolbar and in the toolbar palette, then click on the "Restore default" button to restore the default toolbar set up.

  See also:

  • http://KB.mozillazine.org/Toolbar_customization
  • https://support.Mozilla.com/kb/back+and+forward+or+other+toolbar+items+are+missing

• I BOUGHT A KEYBOARD BRAND NEW AND THE LINE FROM THE TOP OF THE KEYS ARE BROKEN! VOLUME/PLAY/PAUSE - MAVERICKS OSX 10.9.5

  I just bought a brand new "Magic Keyboard" and the last row of keys DO NOT WORK. I'm outraged and absolutely do not update to OSX Yosemite or El Capitan. It is a piece of hardware that does not work as expected.

  ] How can I fix?

  Stop SCREAMING. Apple isn't here, only volunteers trying to help people to get unraged.

  The magic keyboard requires OS X El Capitan 10,11 or later version. That is printed on the box and said in the Apple Store online, just as it is for the Magic Mouse II. If you still use OS X Maverick and remains adamant about not upgrading to El Capitan, then just take the keyboard for a refund.

• Tap the calligraphy and the line of characters

  I do a simple real design. I have a PC touchscreen computer.  Call the 2 lines with my finger. I want the two rows to have the same weight - not thick or thin - only a consistent size to a point or a thickness.  Well when I have a large size - the lines are a uniform 1'.  But when I reduce the 2 lines, the left swirl becomes thick and thin. When you make the reduction I like uniform scale. I used the round brush, swirl on the right line is fine when it reduced.  I need to be a single layer - you can see the curve of the top line that it thickens when design is reduced.  I had no entered fill. Driving me crazy - can not get the left line is a single layer, and I have to use it in a real small - so there must be a single thickness of the lines.  Someone help me?

  

  It is perhaps the issue of blob with calligraphy brushes.

  What you can try is to apply the effect zigzag with a size of 0

  Then set "curves by segment" (or whatever it's called) until the blob has disappeared (can be a high value)