Tandberg 8000 mxp compatiable with sx 20?

Similar Questions

• Integration of TANDBERG 1700 MXP configuration with CUCM (h.323/SIP)

  I tried to configure a CUCM with TANDBERG 1700 MXP 8.5 and I could not, if someone has already done and help me with this number SIP or H323.

  Thanks in advance

  Hello

  Mxp units can be saved on cucm as endpoints (base) of third parties.

  Please find the steps to enter mxp.

  The sip on mxp as uri and sip proxy address settings.

  1. sip mode: on

  2 SIP Uri: [email protected] / * / of cucm for example: [email protected]/ * /.

  3 server discovery: manual

  4. server address: ip address of cucm.

  5 server Type: cisco

  6. transport: whether auto snack but who do not work, change to udp.

  7 TLs: off

  8: authentication sip username: user you created on cucm eg 9011 or amlesh

  9 password: use the same password configured when creating user 9011 or amlesh

  CUCM config:

  1. Select the basic profile of third party.

  2. Add the mac address of endpoint mxp.

  3. Select the appropriate sip, phone etc models profile.

  4. under user digest and owner user id select the same user, for example: 9011 or amlesh

  5. save the configuration and assign DN even that we used in the uri on mxp sip settings.

  6. also associate device mxp the user using the association on cucm devices pane.

  Please let me know if that work for you. I tried this in my lab and works.

  Thank you

  Amlesh

• Differences and versions of firmware Tandberg 880 MXP

  Hello

  I'm a bit confused about the differences of the Tandberg 880 MXP device firmware.

  My camera shows itself on the webGUI what follows:

  Software version:

  E5.3 PAL

  When I check the Cisco site, https://tools.cisco.com/SWIFT/LicensingUI/Quickstart#, I see for my device:

  Dispatched current SW SW
  B4.3 B4.3

  Also when I check the key to Version shipped on the page of Cisco, it does not match the Option key pressed in the webGUI on the device.

  Is any other firmware available for this device? I've heard of some issues of security vulnerability / like this:

  If you're upgrading to F8 or below, you can contact TAC and steer them to the Security Council, with it, you can get the MXP F9.3.1 software for free without needing a service contract.

  Thank you

  Maarten

  If it is running E5.3PAL, then it is likely, that this is one of the old 880 s classic and not the MXP.

  The latest version of the software E-series is E5.3 that you're already running.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Need help - camera not connected in Tandberg 6000 MXP

  Hello

  After connection to the tandberg 6000 mxp codec HD camera, I get message camera not connected.

  There is no speicial cable to this code? and what is the axis of the s-video on the codec that mark as "'primary' cam?

  Thanks in advance

  Shy

  Camera cable aboard MXP is similar, but it does not work with 6000 MXP codecs. I assume that your cable is marked with C3000 (works only with Edsge and 3000 MXP codecs). You need the cable marked with C6000. I don't know the SKU of CISCO for this cable. It may help you reference TANDBERG:

  115420 camera HD t6000s cable, 2 m

  115421 camera HD t6000s cable, 5 m

  I hope this help you!

• Tandberg 6000 MXP restarts continuously after 1 minute

  Hi all

  I have a Tandberg 6000 MXP. Recently, it restarts continuously after only 1 minute. Anyone facing this problem?

  Please help me.

  Thank you.

  I had something similar happen to me with an EX60. It turns out that there was a problem in the registration information sip with the same information for indoor and outdoor record. Wiped factory reset the problem then reconfigure

  Sent by Cisco Support technique iPad App

• Tandberg 3000 MXP question

  Hi Experts,

  I have a client who has a Tandberg 3000 MXP, sometimes the TV screen does not start automatically when received a call. Video conference begins and unit works but the TV does not start and they can't see the other side. You need to restart the TV to make it work again. You have an idea to solve this problem?

  More information here to answer your question.

  The codec has the ability to say to display digital goto sleep or wake up through signalling between the display and the codec - if both negotiate properly.  Depends on the type of display used and configuration in the endpoint.

  But you are not limited to the use of these compatible screens... and they could use ANY type of analog or digital display.

  When the codec is not negotiating with the screen... when the display is on, off or in standby is depends on the configuration of the screen.

  Without knowing anything about the display in use... There is little we can do to help because we don't know even what is the intended outcome.

• HP Envy 700-214 Compatiable with GeForce GTX 660

  Wondered if the NVIDIA GeForce GTX 660 was compatiable with my system.

  Hello

  The 660 NVIDIA should work. Review the items below.

  Guide to Seleting a discrete graphics card

  Computer does not start after the installation of a video (Windows 8) card

• We have Windows XP Media addition ' 05 and we want to buy and IPod and download music. Is our computer compatiable with the classis IPod and IPod Nano? Also, what addition Itunes can we use? _ ___Windows IPod XP compatibility

  We have Windows XP Media addition ' 05 and we want to buy and IPod and download music. Is our computer compatiable with the classis IPod and IPod Nano? Also, what addition Itunes can we use?

  If you can install and run iTunes correctly, then I'm sure that sync with an iPod will work as well.

  What do you mean exactly with "add to iTunes"?

  Tim Baets
  http://www.BM-productions.TK

• HP Deskjet 4200 Series not Compatiable with Windows 7

  MY PC has been upgraded from Windows XP to Windows 7.  My printer HP Deskjet 4200 does not work now and is not compatiable with Windows 7.  Are there updates to the printer or I am now without a working printer

  Hello JMG121250

  For any future reference do not include you the serial number in the forum posts.

  On a much lighter note, you will find the driver download page. Simply choose your version of Windows 7. I asked you the entire CD because it is more than likely that it contains only the driver Windows XP or Vista.

  DeskJet F4280 Software

• Tandberg 770 MXP power adapter

  Hi all

  I have a few question for you guys.

  I am aware that Tandberg 770 MXP is EOL and Tandberg was bought by Cisco.

  Anyone know where I can get the power adapter?

  Please notify

  Best regards

  Titebiket

  Because it is a product of end of LIFE, it is highly unlikely that you will find the exact replacement part.

  Based on this discussion, you should be able to use only compatible power supplies of the same voltage and amperage similar.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Replacement of 6000 MXP Integrator with unique display. C40 SX20 vs?

  I have to make a quick decision and my CISCO sales representative is MIA :(

  We have a bunch of 6000 s MXP (package ingegrator), I would like to replace. They are simple installations with a single monitor on a roll integer grid.

  with output to the screen and a camera is there any point to spend the extra money for a C40 vs getting a SX20? From a point of view video capability they look pretty well. C40 more things gets me in the back, but it is a pretty simple setup.

  Just looking for what people here could do?

  Thank you!

  Although C40 and SX20 are two different solutions for videoconferencing from Cisco, an integrator (c40) and other is fast setting solution (SX20).

  The SX20 Quick Set is designed to provide multi-party and Conference video to high definition with the flexibility to adapt to various configurations - all at a value price and size of the room.

  C40 is for Integrator supports for integration with 3 party like crestron devices, mixers.

  two take in charge the premium 1080 p solution.

  both are excellent solutions and are mind blowing in the feature and the feature as compare to the MXP series.

  You can't go wrong with either.

• Reset Password Admin for Tandberg 880 MXP

  Hello

  Did someone familiar with reset password admin for this endpoint? I think the process is to take note of the option and the keys to the bandwidth and then hold on speakers in the front as the powers of the unit?

  Thank you!!

  You can try the default password which is TANDBERG.  Note: it is case-sensitive, must be entered in uppercase letters.

  Wayne
  --
  Remember the frequency responses and mark your question as answered as appropriate.

• Can't access menus on our Tandberg 3000 MXP - TTC7-09

  It seems that the password for our unit has been changed and someone has disabled the menus on the screen, now, we cannot access the unit, screen, through the network interface or via the data port.

  Can someone help me with this, is there a reset, or any other means of control re - wins.

  At the moment we have no control, cannot see or access the menus, make calls, can't see same current state. everything we see when we initialize the system is our local camera.

  Because you don't know the password and cannot access the codec without it, you will need to perform a factory reset, but this will clear all option keys installed.  Of course, because you can not see the menu OSD or access the codec, you can not write them.  According to what age was your codec, you can try and look for option keys in the Cisco Licensing Portal, go to obtain other licenses > license TelePresence to return.

  How to run a factory discount for a codec MXP:

  1. Connect the RS232 serial cable to the unit
  2. Using Putty software or similar, to connect to the serial port @ 9600 baud
  3. Restart the codec
  4. Pressing CTRL + BREAK starts the codec
  5. Wait for the sign $ and type "EEE" and Enter
  6. Wait for the system to reset
  7. Restart the system

• I have Mozilla Firefox 9 and I have Kaspersky Anti-Virus 2012 but Kaspersky not compatiable with Mozilla... How can I solve this problem?

  Question
  I have Mozilla Firefox 9 and I have Kaspersky Anti-Virus 2012 but Kaspersky is not compatible with Mozilla... How can I solve this problem?

  The patch would be released after January 11, 2012 to settle the problem of the incompatibility of plugin.
  
  Please be aware that you are not less protected, as KIS/KAV products scan on the level of traffic without worrying.
  

  • http://Forum.Kaspersky.com/index.php?showtopic=224799

• HP printer not compatiable with windwos

  I just bought a HP laptop.  I have a POTO SMART HP C5180 all in one printer.  When you try to install the new laptop, I get error that not compatiable.  help ~ Karen

  Hello

  What is the operating system of your new computer. You can find full Featrure software and drivers at the following link:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4158&LC=en&cc=us&DLC=en&sw_lang=&product=1153481#n185

  Kind regards.