Tecra A7 - Battery charge no more

Similar Questions

• Second battery charge no more than 29% on Portege R200

  Hello

  I borrowed today from a friend (who has a Portege R100) its extra battery pack, model PA3155U-1BRL. Unfortunately, when I put it on my R200, it started to load, but stopped at 29% and does not load above this percentage. I also have another identical extra battery pack which I bought with my laptop and it loads and works very well, so it's not a computer problem for sure.

  I also tried to remove the battery main the Portege and do work only with the pack extra battery (faulty), but without success. Yet once again, the same problem occurred. 2nd battery charge indicator LED turns on for a minute or two and then turns off and the battery stops in charge, as I can also see the power management in windows, where the battery is shown as "On Line" when the laptop is plugged into the charger a/c and "Évacuation" when the laptop runs on the battery alone. In all cases, the battery is over 29%.

  Given that Li - ion batteries don't suffer no "memory effect", you have an idea of what is happening and how can I deal with it?

  Thank you much in advance.

  Hello

  Looks like a malfunction of the battery to the battery performance and life is limited
  After abut 500 times charge and discharge procedures the battery will discharge slowly performance.

  I think that you should simply replace the battery with a new and check if it helps to solve your problem!

  See you soon

• Tecra series - battery charging status always shows 70%

  When unplugged battery power meter indicates 70% if the battery if fully charged or discharged.

  Used to work fine but just stopped.

  Looking for drivers, but couldn't find

  Hello

  How old is your battery?
  Have you changed this in the past?

  Also try to calibrate the battery; discharge the battery until it s completely empty. Then plug the AC adapter and wait that the battery could be completely loaded.
  Repeat this several times, then check the State of charge.

• battery charging is more

  No matter which plan to choose, my battery is no longer the power cord is connected.

  My battery is no longer when I plugged in the power cord.  I changed the power management to try to resolve the problem.  I checked to make sure that all parts of the power cord are plugged in all the way.

  Hello

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
  (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
  Stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Tecra 8000: battery not charging

  I have a laptop Toshiba Tecra 8000 works excellently on the radio but cannot get a battery charge! I have 2 new batteries, but when I go to power options it says battery not detected. However if you pass the sector off the power the computer will run on battery for a few minutes.

  Is that all I have to do to recharge the battery because it denies services to broadband radio if I can't charge the battery.

  Thank you in anticipation

  Roy Drysdale

  Hello Roy

  As much as I know there is no any kind of parameters for the battery. Everything works automatically and power of electronic power control controls this. Software gets some info from the hardware store.

  If the battery is not recognized by the system, I'm afraid, there is not much to do and the unit must be checked by the service of the laptop.

• When I use my I pad and using its battery charger makes this effect is somehow more battery?

  When I use my I pad connected to its battery charger testament that it's the battery in another way to proceed and more the i pad?

  No, it's perfectly fine to use while charging.

• Tecra R850, battery "plugged in, not charging".

  Hello
  I'd appreciate some thoughts on the problem.

  The problem:
  The battery is not charged. The icon in the status bar indicates that the battery is "connected" but that it is 'not charging' and 'remember to change your battery.
  Something similar to:
  https://BD23.HTTPS.CDN.SoftLayer.NET/80BD23/142.4.51.106/images/consider-replacing-your-battery.PNG
  In addition, the battery charge indicator is off

  What happened:
  I was using the computer on battery power. During use, the message appeared that the battery is critical 3% and computer suddenly stop (or went to sleep/hibernate). It is possible that the battery was empty, since I was not charged for 2 days. Which was weird, is that I do not have the message that the battery is at 7%, which is normal warning that I get.
  The next day, I plugged the computer power cord started. At the start, computer called I want to boot into 'Safe Mode' or 'Normal '. I selected 'Normal '.
  Then I noticed the problem described above.

  History:
  Nothing in particular. Notebook is less than 2 years old. Battery was at six, now has dropped to about 4 hours, but had no previous problems. No power surge, does not drop the computer, etc...

  Comments:
  -L' computer works without battery, only on the power cable.
  -L' computer does not react if I put only the battery, without the cable, even if it is said that the battery has 9 percent. (he says there are 3% before the initial stop, however)
  -When I plug in the power cable, the battery charge indicator is on for 2-3 seconds (in orange) and then is off. This happens whenever I take the cable out, then in.
  -What is strange, is that every time when I disable networks wireless/mobile using "Flash Cards" and restart the computer, they are 'on '. Previously, this situation will only occur when the computer crashed, or I made him stop (holding the power button)
  -J' tried what was suggested on the forums of Toshiba:

  * 1
  §Remove cable power, battery, clean contacts, put everything back in place
  §Leave to load a few hours
  -> Indicator battery charge was not on a few hours after the

  * 2
  §Remove battery, start the computer
  §Go to the "Device Manager".
  §Uninstall method to control compatible ACPI Microsoft battery
  Computer §restart
  § ACPI Microsoft settle again
  Computer §shutdown
  §Put battery, start the computer
  -> No change, still do not charge, indicator is not lit

  * 3
  Also have interpreted 'Factory reset '.
  §Apres recovery and restart, there is no change
  §Cela time, when I turn off the networks wireless/mobile using 'Flash Cards', they remain "off" even when I reboot a computer, which was not the case prior to 'Factory reset '.
  §However, if I take the feeder and then place it in (while the computer is turned off) and then start the computer, wireless/mobile networks are once again 'on '.

  Any thoughts?

  Thank you
  Miodrag

  On the picture, information is displayed: consider replacing your battery. This means that the battery is defective somehow.

  I guess you need the battery help, another tested good original.

  I don t Jules Destrooper that there is some sort of problem since you've already tried the factory reset recovery software and computer laptop. Problems of software, this procedure should resolve any software related issues. But it was not.

• Battery charges more than 100%

  Hi, I have upgraded to a new hard drive to 500 GB.

  I cloned the old drive to the new with Acronis.

  Since then, the battery of the laptop (maybe 1 year battery) charge up to 100% and maintains load and will not stop.

  Steps I took to remedy this situation that was not:

  Load all the way and walk back.

  Taking battery, now the power button / stop and connected laptop turn off, disconnected, return to.

  Nothing seems to change, she always perceived when it is plugged.

  When he is in charge, the led is orange, but when it is 90% charged the led is green.  As soon as the green light is on, it does not turn off and windows indicates 100% battery charge.

  Course, it's something to do with windows when I cloned on the new diskette because when the problem started, but I don't know how to fix it.

  Operating system is Windows 7, thanks.

  I fixed it.

  What worked was

  Power off

  battery

  keep the power button / stop for 60 seconds

  plug in power

  Unplug

  connect battery

  plug in power

  turn it on

  and then once I turned it on it 100% charged and stopped!

• TECRA 9100 battery problem

  Similar experiences to mine, please?

  After using no not my Tecra for some time (about 3 months). He was once again the charger for more than 24 hours and I'm now done with the original problem, I had the last time I used the Tecra, several months ago! The problem is, I think, only related to the tent to use it on battery, as follows:

  At the start of the machine of 'cold', after passing the request of 'password' screen, it goes straight to a "small blue screen", which includes the message:

  Hardware malfunction

  Call your provider of support material

  NMI: channel check / IOCHK

  The system stopped *.

  A little more information, I found that I can actually 'blue screen' situation - turn off not having don't no need to remove it battery that I first thought - and if I get the power cable then everything starts up well and seems to work normally. If I then remove the power cable (leaving the laundry to run on battery only) the small blue screen and same message reappears.

  Yet once which seems to indicate a battery problem, I guess?

  Has anyone else had a similar experience?

  Post edited by: Gary S Cooper

  Hello

  Windows may indicate a fundamental error messages only when material occurrence malfunction, so that the elimination of the errors can be difficult for equipment problems. Most of the problems of material step in connection with the motherboard, the main memory on a motherboard or adapter or the stamp on a motherboard or adapter.

  On this path, it is not easy to say what may be the problem. I don't know how old is the unit, but if the unit is still under warranty I advice you contact service partner chartered. I'm sure they can find what may be the cause of this problem.

  Good bye

• Firefox is using excessive via "Background App Refresh" battery charge - Although setting being decommissioned.

  I have background App refresh disabled - the scale of the system. However, the Firefox application has managed to get a huge 8.6 hours of substantive activity App Refresh... and eat an important piece of my battery charge in the process. He has used more battery than the Safari app, even if I used just the Firefox App Firefox does NOT respect (and iOS is obviously not properly apply) the updating of the background App setting.

  The Firefox application won a quick deletion of my iPhone. I can give him a second chance in the future, when Apple and Mozilla had the chance to solve this fundamental problem App update.

  Attached are two screenshots. The first is my screen background App update, which shows that I have background App refresh disabled in its entirety and the second, my main screen of the battery, which shows the excessive amount of the battery used by "Background App refresh." Firefox is a flagrant violation in the Protocol of the battery by the Firefox app... and unfortunately, iOS has allowed it to happen.

  I am very pleased to announce that the issue of excessive background use I had experienced with a previous version of Firefox for iOS is part of Firefox version 1.2! I now use the normal battery with little or no background activity. I am very pleased and I intend to continue to use Firefox on iOS regularly.

• Help with Apple battery charger?

  Because of my Apple Magic mouse, which need spare batteries, at least once every 25 days and my Belkin YourType keyboard requiring spare batteries every day, I bought the Apple Best Buy battery charger as it offers is more the Apple store online. How will I know when the device is finished loading? Best Buy reviewers talk about a sense of light orange blinking battery is defective. I can't say when the charger is finished loading. No it fires? He flashes? It emits beep? Best shopping site only mentions that it reduces the amount of energy it draws when it finishes loading. I want to know when it is finished loading. Everyone go through Duracell batteries in their Magic Mouse in less than 25 days?

  Hello Rebekah

  I used a charger Apple in recent years.   Plugged in to the mains and batteries, the charger will immediately return orrange and will stay like that until the batteries are completely charged.   At this time there the little light turns green and the battery themselvesz will feel warm to the touch.   When they are charged fees to be held for a few weeks, is slowly diminishing.   As the batteries cool, the light turns off, but the batteries themselves will remain loaded.   Use a battery as a final control power indicator.

  If you don't get an orange at first, chances are your batteries are not long enough to complete the + and - sign.   Real Duracell rarely have this problem.   Evade about to see if it makes a difference, but don't be tempted to use aluminum foil packing to compensate for the length; test another battery.

• Tecra A11 - Battery Health Monitor - Message: unknown

  Hello

  PC for my TECRA A11 - 12F battery health monitor (2 weeks) shows an unknown messageheatlh.
  If anyone else has had a similar problem and has it been resolved?

  What happens when you start laptop without battery and when the OS is battery charge will be added also? Battery is correctly recognized?
  In any case, the update of the BIOS is good solution.

  If you are not sure that you you need or how to update BIOS let us know.

• Tecra M4 - battery problem

  Hello

  My Tecra M4 battery appears to discharge on his tours off the coast. If I charge it to 100%, then unplug it and don't use it for about a week when I come to turn it on it used and I need to connect to the mains. When he dose get Windows reports 0%. It seems to lose about 15-20% per day of power turns off.

  Anyone know if this is normal for this model of if there is probably a problem that I have to look at the dose.

  Thank you

  David

  Hello

  This is definitely not normal. I think you need a new battery. That this be enabled by service. You still have warranty, so it will be free.

  Good bye

• Questions about the BIOS update and battery charge on Satellite M30 104

  Hey,.
  I try to update my BIOS, but it does not work because my battery won't charge any more, if a window always tells me that my battery is not enough. Yet, the reason why I'm updating my BIOS is that I read in a forum that might solve my problem of battery charging.
  I'm fairly certain that the battery is not the problem itself: I bought a new battery, it worked for 10 minutes once or twice, then again the load stop completely.
  If anyone knows what the problem is or how to update my BIOS, please...

  Hello Celia

  I am not a technician, but as far as I know, BIOS has nothing to do with charging the battery. In my opinion, there are some problems with e-procurement (electronic load). Sorry, but I imagine that you must contact the partner in your country.

  They have diagnostic tools and it can be verified. Please call and simply explain the situation.

  Good luck!

• Problem of Satellite A200 - 28 p/battery charger

  Hello

  I had a power problem with my battery charger for a while sometimes it would charge when plugged in and others would not, so if I removed the charger to move the laptop it was a bet of 50 / 50 as to whether it would be instantly turn off or not.

  This was not too much a problem as the laptop is not moved too often, but I recently returned home to find my charger did not work at all and the cell phone was off.

  I managed to get hold of a replacement charger just to test it and I found that when it is plugged, flashing blue light which is usually strong watch the charger is plugged, and the times he has stayed solid and allowed me to boot up the laptop lasted almost a minute at best before shutting down completely not even enough time to get transfer important documents I have there.

  Is buying a new battery is going to fix this, or is the problem more likely to be something inside the laptop to be replaced?

  Hello

  I doubt that buy a new battery would solve your problem.
  Why?
  Because the laptop should also work correctly using only the AC adapter.
  So even if the battery is defective or dead, it should be possible to use the laptop connected to the network.

  The laptop has a number of other power resources, including a smart power battery clock real time and these resources are closely linked and one could affect apparent power problems.

  If the DC IN is blue, this means that the AC adapter is connected properly and the power supply correctly. If this is not the case, the adapter may be faulty or there is a problem with the electronic power supply on the motherboard.

  So in this case, the power adapter must be tested if you are sure that the adapter is working properly, then there must be a problem with the motherboard to 100%.