Tecra R10-116 (what CPU)?

Similar Questions

• How to activate the em64t on Tecra R10-116 to use 6 GB RAM

  Hello!

  I want to use 6 GB of ram on my laptop. In this case, I need activate the em64t functionality. I entered the BIOS configuration, but can not find the place where to allow him. Before I saw him...

  Hope someone will help me

  Hello

  As far as I know, that this option is not available in the BIOS and to be honest, I doubt that the BIOS would deal with the 6 GB.
  But why you want to have 6 GB RAM?

  The 4 GB of RAM is more than enough and I doubt that preinstalled applications exploiting fully the 4 GB of RAM

• Upgrade CPU on Tecra R10

  I wonder if someone might be able to answer a question for me.

  I have a beautiful Tecra R10-11 b and he's been very good for quite a few years. It works under Win XP and did everything he asked without problem.

  I want to know, however, is if it is possible to mount a faster processor. I have a suspicion that the installed processor can be fixed permanently and is not replaceable, but I'd like to know.

  I had played with the idea of replacing the P9400 Intel Core Duo with something a bit new, so maybe install Win 7 and more memory. There are 3 GB of ram installed.

  Any suggestion would be appreciated.

  Parkman

  The CPU is bad, which means that the processor is removable.
  But important fact is that the manufacturers of portable don t CPU upgrade support.
  One of the main reasons is the BIOS which is especially modified by the manufacturers of cell phones.

  But let's start with a few basics:
  The CPU must be supported by the BIOS and chipset.

  So let's ' s check what CPU would be taken in charge by Mobile Intel GS45 Express Chipset, which is part of the Tecra R10 - 11 b
  Here on this page of the Ark from Intel, you can find compatible processors
  http://Ark.Intel.com/products/35505/Intel-82GS45-graphics-and-memory-controller-hub#@compatibility

  But even if the chipset would support new CPUS, some compatibility issues may appear because of the BIOS.
  However, the Intel Core 2 Duo CPU (Penryn Montevina) processor have been equipped in different models of R10, so probably other Intel Core 2 Duo processors are supported.

  By the way: the RAM can be upgraded up to 4 GB of RAM

• Re: What are the properties of the SSD used in Tecra R10

  Hello

  Does anyone know what are the features of the ssd drive?
  128GB but what manufacturer? I need all the features of the SSD for the Tecra R10.

  Thanks for your help ;)

  Hello

  I have found these details:
  The SSD drive that was installed in the Tecra R10 - 10J is a
  -128 GB SSD
  -10 MB buffer size
  -SATA interface
  -Size (mm) 9.5 mm
  -Weight 66g (Max)

  That s all I can say about this SSD hard drive

• Tecra R10 - 10J: BIOS update abandoned "this computer is not supported.

  Hello

  My laptop is a Tecra R10 - 10J PartNumber PTRB1E-00D002FR, 1.40 BIOS version 11/13/2008.

  I recently bought and installed two modules of 4 GB RAM (8 GB). Enter the BIOS setup, I found 8 GB. Windows 7 64 bit also detects the 8 GB, but uses only 3.80! MemTest and diagnosis of CPU - Z are good for all of the 8 GB. I went from RAM modules from one location to another, but nothing has changed. If I replace a module of 4GB by a 2 GB memory, Windows 7 uses 5.80 is going well. Same result as any module of memory of 4 GB or slot I use.

  I suppose that problem comes from the BIOS. The 1.40 version does not support memory mapped IO functionality.

  So I followed the instructions on "http://fr.computers.toshiba-europe.com/innovation/?download_drivers_bios.jsp?" to find the last good package to update BIOS for Tecra R10 - 10J. I downloaded and ran the BIOS310?. exe, but received the error message "this computer is not supported"?

  Can someone tell me how to upgrade my BIOS or did someone has a better idea to activate the full 8 GB of RAM support?

  Thank you for all!

  Axel Limousin

  Hello

  You must install the VAP (value added package) or if this package is already installed, you must reinstall/upgrade to update it.

  Disable the Antivirus software and disable things of security such as firewalls etc.

  Hope that you're lucky...

• Re: Availability of the Tecra R10

  Hello everyone,

  What will be the new Terca R10 available in Europe (especially in Germany)? Someone has an idea that the screen is a glare on or not?

  Thanks for your help
  Lord

  PS Here is a link:
  http://explore.Toshiba.com/laptops/Tecra/R10

  Hello

  I do not understand why you ignore the fact that this forum is user forum. A precise answer to what you can do just Toshiba marketing people who plan such things.

  What you can do is check the Toshiba Germany page at any time and follow the news there.
  I hope that the link is known to you. If not inform e ;)

• Tecra R10 - 10J - BSOD if I use WiFi

  I have a new Tecra R10 - 10J. I installed Windows XP directly with the recovery disc, so I never used Vista.

  At the beginning I had problems getting 3 G to work, it is now OK. But I have another question unresolved: Blue notebooks accidents or restart randomly when I'm connected via wifi.

  I did three things to run:
  -upgrade to the new version of BIOS, which is: 1.50
  -updated the last driver WiFi found on the website of intel: Intel WiFi Link 5100 AGN driver 12.4.3.9 version
  -J' have also disabled in Device Manager the ability for the system to border/shock the wifi device (I found these tips on some forums because of driver Intel WiFi Link 5100 is not not reliable).

  It seems to me that theses stocks have made things better. Blue screen are less frequent but they still happen. I also thought, there may be a conflict with the 3G device, so I have alwals turn off 3G using the shortcut when I'm on wifi. However, it crashes from time to time.

  I'm beginning to wonder if there may be a hardware problem?

  Thanks for help.

  Hello

  You also update the driver 3G or only the WiFi driver? I think you should try to update this driver too.
  Check the Toshiba site for an update!

  And can you please send the exact code of BSOD? This is very useful to identify what is the cause. In addition, you can search on the Microsoft KB for this code.

  I hope I could help a bit.

• Tecra R10 - 14 d - 3 G Internet no longer works after update drivers

  I have a Tecra R10 - 14 d with 3G modem PTRB3E internal Ericson F3507g and I did an upgrade to 3G and Wireless Manager 5.6 modem drivers at 6, and after that I upgraded loss of internet access.

  The upgrade was without any error. The Wireless Manager connects successfully to the internet, but internet provider does not work.

  I tried to find previous versions of Wireless Manager and drivers to downgrade Toshiba without success. Just found the latest version that causes this problem.

  What is there? The new version may not be compatible with my computer?

  Thank you best regards &,.
  Rui

  Hello Rui

  You have downloaded this driver from toshiba support page?
  Have you tried to roll back OS to an earlier time using System Restore tool?

• Tecra R10 - 14 c - very slow start

  Hi all

  I have Tecra R10 - 14 c and with software recover Windows Vista Business 32-bit all the time when I turn on the laptop, it takes a long time (from 15 to 25 m) to start Windows, comes in turn on laptop. But when I restart Windows Notepad is normal startup.

  I try to install Windows Vista via the HD in Toshiba recovery software and the same problem. The problem when put after stopping, but reboot is normal startup and very quickly.

  Please help me

  Hey Buddy,

  If you start the computer after turning off your laptop hangs on a certain point? What is exactly different for restart?

  For Windows it's not important if you stop or restart the computer that of the same. I can only imagine the laptop hangs on the Toshiba BIOS screen, is this correct?

• Tecra R10 - change of internal drive SDD

  Hello
  I have a Toshiba Tecra R10

  I want to change my drive for an SSD, but I do not know how to open the computer. Please, can you tell me if there are some videos on youtube to explain how to do this?

  Thank you.

  Hey,.

  A friend told Tecra R10 too but it s not easy to exchange the HARD drive because you have to remove many parts, like the keyboard, Base Assy and lots of screws. When you replace the HARD drive on this laptop, you should know what you're doing because it s a procedure difficult and you should have experience with laptop disassembly.

  If you n t know how you need to contact a technician for help laptop. Guys can you help to swap the drive and here you can order a new SSD or HARD disk too. :)

  Here is the list of service partners that can help you:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

• Need a specification complete for Tecra R10 - 147

  Hello!
  Can someone give me please the specifications (especially for the 3G chip embedded) for my Tecra R10-147.
  I need some specific technical information that I can't find anywhere on the net. Tecra model doesn't even exist on the Toshiba site. I'm french, and perhaps that is an exclusive model for the France or Europe.
  Thank you

  Matt

  It is not easy to find the complete specification.
  I'm sure you know what components are inside.

  About 3G I just make it is - 3 G HSPA FOR EU - 7.2/2.0MBPS DIVERSITY and supports the European region.

  What do you want exactly?

• Tecra R10 - Summers - you happy?

  Hello

  I think buying a Tecra R10 with integrated graphics. I read a few reviews on the net, and they look quite good. However, I want the user experience of the users of the real world.

  Are you satisfied with your Tecra R10?
  It runs too hot?
  The build quality is as good as Toshiba sells?
  How about the screen?
  No other complaints?

  Finally, it is easy to open for cleaning?

  Thanks for your help!

  I set a place for a friend and had a play with it for a few days, and I am very impressed with the R10.

  Are you satisfied with your Tecra R10? Yes, the performance and the quality is amazing (this is the SSD model so the start time are blistering fast :))
  It runs too hot? No, the CPU base and effective magnesium keeps cool.
  The build quality is as good as Toshiba sells? The build quality is similar to my Tecra A9, which feels solid and well designed, quality of the materials.
  How about the screen? The screen is a new type of LED, which has the better contrast than normal FL Tube screens. I am satisfied with the picture quality.
  No other complaints? Honestly I can't think of a thing wrong with it. I think to buy one myself.
  Finally, it is easy to open for cleaning? There is a door on the base of the laptop where you can access and clean the radiator. I wish my Tecra A9 had this feature.

• Connection persistent abandonment on Tecra R10 with 3G integrated modem

  It of all the day repeating abandonment of the wireless Internet on my Tecra R10 Win7-32 running.
  The Wireless Manager detects the full signal all the time and the failure is repeated according to almost regular pattern each time take a minute or two and cela seams occurs only when the modem is idle and never during downloads.

  Does anyone have an idea?

  Hello

  Can you tell me where you are? What operator do you use?
  You are able to test the remote connection instead of via the Wireless Manager? Same problem?

  Dialup Howto:
  http://APS2.toshiba-tro.de/KB0/HTD9C02RX0001R01.htm

• Tecra R10 - 10J - 3 G Broadband F3507G does not

  I have a new toshiba Tecra R10 - 10J
  I went down to windows XP

  Even though the documentation says nothing, I found the thin slot; (it's behind the battery) I put my sim card inside (this sim card works in a usb key with my 3G provider).

  In Device Manager, the toshiba F3507G broadband shows 3 times:
  in network cards
  in the com ports
  in modem

  But when I run the wireless toshiba (version 5) Manager, nothing is known.
  He doesn't seem to see the slot and the device (the shortcut key is also well-positioned to plug brodband)

  I've updated the drivers and firmware from the toshiba website: still the same problem.
  I looked in the Bios: nothing is displayed regarding the brodband modem.

  I don't know what else to do?

  Thanks for your help

  > But when I run the wireless toshiba (version 5) Manager, nothing is known.
  Please post the error here.
  Say the WM? "No modem found"? or "Radio OFF"?

  BTW, did you also install the Toshiba value added package?
  Also, the RF power control utility must be installed.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp
  It is essential to get the 3G correctly to work.

  > I looked Bios: nothing is displayed regarding the brodband modem.
  It is correct.
  There is no entry in the Bios about 3G.

  Post edited by: Xyran

• Problem with module 3G Tecra R10 - 10W

  Hello

  I got a new Tecra R10 - 10W a month ago.
  Until yesterday, the 3G module worked fine. This morning I got a blue screen on the end of Windows. After the computer restarts I heard the tone of conecting/disconecting some USB device several times. After the short survey, I found my 3G module enabling / dissabling every few seconds.
  In the control panel/phone options and modem, I found two modems broadband TOSHIBA is on COM3/COM4, 'away', or 'Non-functional '.
  I installed all the new software up to date, as it was shown on Toshiba TEMPRO, bur after that restart the computer got the same result.
  Later, I had Windows termination screen again.

  Please let me know what is the problem and how to solve?

  Best regards

  Hello

  Something seems to be confused at the top on the system
  Maybe it was a new update reported by Tempro. Who knows.
  Always is it that there is an error in device (3G) in Device Manager

  I think you should simply remove the 3G (high-speed modems) module from the Device Manager and reboot the laptop.
  After the new reboot the operating system should recognize the deleted devices and should install it again
  In most cases, it helps to solve these problems

  But if you're not going to succeed, I recommend uninstalling the software from the 3G module, then you must clean the BONES and the registry with a free cleaning tool (i.e. CCLeaner).
  Reboot several times to ensure that everything has been properly cleaned and finally try to reinstall this software again

  Mate good luck