Test of recovery with parameters not supported

Similar Questions

• System recovery disks do not support this computer

  Two weeks ago, crashed my HP Pavilion Elite HPE - 480 t hard drive model.  It is a 1.5 TB came with the PC.  I bought a WD 1 TB hard drive and installed.  When I used my recovery discs, I received a message, "the system recovery disks do not support this computer.  You are not able to restore this system with these discs. "Because I had never used these recovery discs, I assumed I had their damn so I bought authentic system recovery disks from HP.  Yesterday them - even received training as before.  I called HP tech support and I was told that those recovery disk works with a hard drive that is identical with the original hard drive.  Located between the two hard drives that the original HD had a 3 GB/s, and the new is 6 Gbps.  Is this correct?  They "graciously" offered replacing my new hard drive with a hard drive that works for only $180.  Seems a little steep, but I am confused.  Is system of technical recovery disks?  I would like another opinion.  If buying a new motherboard out me of this?  If someone knows a resolution to my situation, I would be very grateful.  Help!

  Hello

  In fact, you have more options that will avoid spending more in $$. The first thing I would try is the utility that provides HP. It is used for when the set of recovery disks does not work with a new hard drive. Follow the instructions of this web document.

  View your results. If the results are negative, we can install the operating system on your new hard drive with another method.

  What is the WD SATA drive model you purchased?

  Erico-

• the system recovery media does not support this computer

  I have a HP G7-1365DX and the hard drive (750 GB) is a failure.  I did a recovery file on a USB key from the recovery partition and then replaced the hard drive with a 120 GB SSD.  When I tried to reinstall the USB system, I get the message "the system recovery media does not support this computer."  Is it because the hard drive was replaced by a SSD?  How to restore the system if the recovery disk does not work?

  Hello

  You are right about the source of this problem - HP recovery media often has problems of restoring the operating system on a smaller disk in quality than appeared on.

  There are a few options available.

  1. if the 750 GB drive is still able to operate, use your recovery media to perform a factory reset and then use software (or Windows 7 own imaging utility) for this clone of your SSD.

  2 create your own recovery media to use to run the installation - it would be my personal preference.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create an installation disk yourself using another PC - just download the good Disk Image ( this must be the version exact same origin supplied with your laptop ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write that an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• NJR, I have installed connectify on mn pc connection sharing software 2000 computer hp laptop, but it displays a yellow triangle with AP not supported. What do I do?

  Hi I have installed connectify on mn pc connection sharing software 2000 computer hp laptop, but it shows me a yellow triangle with Ap not supported, what to do?

  Hello

  You asked your question in the text of the Microsoft Community. Please could you click on the globe icon to the world (change region) at the bottom left of the screen and then choose your preferred language. Now ask you question once again.

  Thank you.

  

• HP ENVY PHOENIX 800-030qe: the system recovery media does not support this computer

  Hello!

  I can't recover to factory settings using recovery media (4 DVD) after changing HD (the previous device has crashed/broken).  The message is: "the media recovey system does not support this computer. You are not able to restore this system with this media. »

  So, what should I do?

  Thank you very much.

  Luiz Borges

  Upgrade the BIOS/downgrade will not fix it unfortunately.

• Pavilion 23-b244 AiO: the system recovery media does not support this computer

  Hey all,.

  I had a power outage (1 TB) HD material on me about a week ago and replaced by a (500 GB) SSD, not purchased from HP.  I then ordered the recovery disc from HP for this particular serial number.  Whenever I boot on the recovery discs, I get "this computer does not support the system recovery media. You are not able to restore the system with the media. "The Minsize argument in the instructions to build on the DVD file provides a minimum of 140 GB, so I don't think I have a new smaller drive system is the question.

  Last month I have updated the firmware to v80.08, and in the bios "product name", 'SKU number', 'serial number of the chassis' fields are all empty.  In "System ID", everythign is empty except UUID and family name.

  I think that's why I'm not able to boot to recovery discs?

  Any help would be appreciated, I have use this computer for quickbooks and have bee unable to do accounting for a week and a half.

  Figured it out! On my Pavilion, you press Ctrl + A in the bios then click on 'System IDs'. Then I was able to type in the ID to build my recovery and support the byte to feature on the sticker under my machine. F10 to save then the recovery media recognized the computer properly and booted up!

• DV6-6c15nr, "the system recovery media does not support this computer."

  Hi all. I'm trying to reformat my laptop (dv6-6c15nr), but when I try to reformat to f11the recovery manager f, all options are such that the system restore and restore to factory is grayed out. The next thing I tried was a set of recovery disks. When I used the recovery disks, it showed the message "this computer does not support the system recovery media. You are not able to restore the system with the media. 0110 A601UA #ABA - A1U60AV. Why can I not reformat my laptop... I remember that I was able to reformat until I sent offshore to get the hard drive and the radiator replaced by hp year last April. Now I can't get to... that this has to do with anything? someone please help...

  I also tried without the bios downgrade F.19 REV: a. which do not help either.

  It seems that the motherboard may have been changed and the information system (tattoo) has not been updated to match that of your computer. While I can't fix this for you, I can suggest some possible solutions and I work to spare;

  (1) you can contact HP Customer Support and ask that they correct the problem.

  (2) attempt to control that recovery discs for the model of the motherboard is currently labeled as.

  (3) If you can still read the Windows product key of 25 characters on the Microsoft COA affixed on the computer, you can install Windows 7 using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7 SP1, create the installation media and install Windows 7 SP1 using the 25-digit key from the COA Microsoft on your computer.

  If you have any other questions, feel free to ask.

   

  Please click the White Star of KUDOS to show your appreciation

• install xp instead of vista and now the recovery discs are not supported

  Pavilion Media Center PC m8000

  1. installed XP on my laptop on the desktop that had need of Vista by mistake
  2. ordered the HP recovery discs and now they are not supported
  3. Build confirmed IDS
  4. How do I remove the XP completely?
  5. Or should I forget it and try to activate the XP?

  Sincerely,

  A ding dong in denver.

  Hello

  I suggest to perform a new Installation, or if you have a recovery disk, you can perform the recovery of the plant.

  For more information, see these links:

  Install Windows XP:

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  Installation and reinstallation of Windows Vista:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  I hope that helps!

• recovery disk says not supported

  my restore disk said it didn't is not supported... I created a recovery disk from the recovery partition hp... After using the firdt, he says that he doesn't sipport my system

  http://welcome.HP.com/country/us/en/contact_us.html

  For questions about the HP recovery process, contact HP at the link above.

  It's Recovery process HP, not Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Help please: CloneVM_Task is created but will fail with: operation not supported on the object

  Someone Please help with this, I'm breaking my head with this for 5 hours now.

  I submit, in CloneVM_Task with the following XML (which returns a task id back http://i.e. the application has been accepted in this format):

  & lt; CloneVM_Task xmlns = "urn: vim25" & gt;

  & lt; _C type = 'VirtualMachine' & gt; VM - 938 & lt; / _This & gt;

  & lt; record type = "Folder" & gt; Group d1 & lt; / file & gt;

  & lt; name & gt; 1_UBUNTU 804 & lt; / name & gt;.

  & lt; spec & gt;

  & lt; location & gt;

  & lt; data store type = "Datastore" & gt; datastore-683 & lt; / store data & gt;

  & lt; pool type = "ResourcePool" & gt; resgroup-57 & lt; / pool & gt;

  & lt; / location & gt;

  & lt; model & gt; 0 & lt; / model & gt;

  & lt; powerOn & gt; 1 & lt; / powerOn & gt;

  & lt; config & gt;

  & lt; memoryMB & gt; 1024 & lt; / memoryMB & gt;

  & lt; numCPUs & gt; 1 & lt; / numCPUs & gt;

  & lt; / config & gt;

  & lt; / spec & gt;

  & lt; / CloneVM_Task & gt;

  However, the task itself returns an error saying: the operation is not supported on the object.

  Does anyone know what it is?

  The info that I'm sending should be 100% correct:

  - vm_id: the machine ID of the virtual MODEL VM I'm cloning (100% certain that it is correct)

  - file: the rootFolder returned by ServicContent

  - data store: the data store ONLY I should store VM on. When I query for this data store information it shows clearly that it is accessible and multipleHostAccess = true, so

  - resourcePool: I got this info when querying my ComputeResource properties. I have 1 cluster and resourcePool value that's what I put.

  I really have NO idea what's going wrong here... The CloneVM_Task creates a task - but that's where everything falls apart.

  Please HELP!

  Yes, you should not use the rootFolder, which is just the folder root inventory integer vCenter. A default vmFolder will still exists if you have additional folders, and that's the one you reference to. By default, you must question him to do this, where one day you decide to create folders against hard coding moref ID. The IDS are digital and probably default folder gets this value by iteration, but again, I recommend he petitioned against hard this coding.

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• Store.E TV + updated with Firmware not supported

  Hi all

  Since then, I was unhappy with the original firmware due to the absence of some support from subtitile.

  I updated it with playon version PV73100_v7.06.r1199 playon.unixstorm.org firmware

  Now my device is functional, but not on the remote control buttons work except the power button

  I do not know how to uninstall. :(

  Can someone help me on how to uninstall.

  Thank you

  Try this page:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Choose here:
  Options
  Training devices
  Multimedia hard drives
  3.5 inch StorE TV +.

  Now you should be able to get the firmware 2.12_UI1.0

• Screen went black with 'Input not supported' circulate on the screen.

  I have a Compaq Presario SR2180NX computer with a monitor, HP W19b. Lately the screen fonts/resolution move on their own to a much larger size. I went in the resolution to change it several times. Now, when this, my screen went black and a box with 'ATTENTION' entry not taken in charge"is floating around the screen. I rebooted, it unplugged and restarted but I can't display to show anything else. Suggestion? Comments except buy a new update of thing? Thank you very much.

  Start the pc in safe mode and try to change the resolution.
  Then update the graphics driver.
  C.

• Lodge B5S08UA: {Thae system recovery media don't dose not support this computer

  After I bought it, I created the back upward on ((recovery media)) the DVD before doing anything. Now I have and I want to install it to the PC ((HP Pavilion M6-1045dx))

  can someone help me?

  Thae system recovery media dose not support this computer, you are not able restor this system with the media

  Hi @ako89kurdish,

  Thank you for posting. I read your post, and I understand that you have received the message "system recovery media does not support this computer."

  Error message in Windows 7 HP system recovery: "the system recovery disks do not support this computer."

  One of the following errors open when you try to use recovery disks:

• 10g recovery catalog db do not support the db 11g

  I was wondering 9i and 10g recovery catalogs do not support db 11g? and if I do 11g as a recovery catalog it will support 9i and 10g right?

  Just to clarify, is the version of the database of the catalogue of recovery that may reside in > = 9.0.1. However, the schema version of the catalog of recovery within the database should be 11 g.

  Edited by: Brian on November 20, 2008 14:55

• Hard drive replacement, windows support, media does not support this computer?

  Laptop HP G72 M #-C55DX, I replaced my hard drive with the same OEM, 4 recovery disks made when I bought the laptop new, replaced the hard drive, run startup test, memory and hard drive OK, insert #1 recovery disk, windows loads, then get the system recovery media does not support this computer. you are not able to restore the system with the media. I have windows 7 Premium I don't know what to do next. Thanks for the help. Frank

  My recovery disks that I had at the beginning are bad. Has bought the HP boot disks. up & running, thanks Frank