The Scanner/printer Dell 940 fax.

Similar Questions

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• Cannot install the 720 printer dell laptop toshiba satellite

  have a toshiba satellite laptop and I am trying to install a dell 720 color printer. I have the installation CD in the computer, but when even it is said there is no available drivers and does not connect.
   
   

  Hello

  Please see if Rick here thread

  http://en.community.Dell.com/support-forums/peripherals/f/3528/t/19306910.aspx

  on the Dell Community aid.

• Mode the scanner printer HP 1510 eve

  The printer goes into sleep mode, then it is not found when a work print or scan are sent to it. Must press TO wake, and it's not on (pardon the pun) especially when accessed from Windows Homegroup

  OK, downloaded the manual and found where to trun ensures

• How to stop the reports printed after each fax?

  I want to stop having a printed report after every fax I send - passed or failed - on my new officejet 8600.  Any ideas?

  Thank you!

• I can not scan from my computer, I have to use the scanner, printing device how to solve?

  I have a HP Officejet 6700.

  After installing windows update the option of scanning/printing, etc... my computer has been deleted. I can scan/print directly from my printer. I uninstalled the software, reinstalled from the disk. I tried to go online to update the software and drivers, but he always tells me that these files are corupt. Help, please?

  Download and install the drivers and the latest software recommended full on the website of HP.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=5058338

  What happens to the anti-virus do you use when you get the corrupted message?

• I am able to scan from the scanner and printer, but can't seem to scan onto computor

  I am able to scan from the scanner and printer, but can't seem to scan on computor, what I have to do.

  Hello

  I suggest you to update the latest drivers for the scanner\printer and check if it helps:
  http://support.Microsoft.com/kb/283658

  Also check out this link:
  http://support.Microsoft.com/kb/323166

  It will be useful.

• Acrobat 9.5.5 stops when you try to scan to PDF on a Mac running OS 10.11.2 Scanner/printer is Brother MFC 5890. Usually works for a single analysis after the reboot.

  Acrobat 9.5.5 stops when you try to scan in PDF on Mac running OS10.11.2. Using the scanner/printer Brother MFC5890. Error message generated and sent to Apple. After restart Acrobat, will travel to the format PDF once, and then repeats a dysfunction until you restart again. Is there a solution? No Adobe updates available.

  Hi ronaldw43846300,

  Acrobat 9 is not compatible with Mac OS 10.11 Adobe Acrobat system requirements, please use the application in a consistent environment to make Acrobat work properly.

  Kind regards
  Nicos

• How can I send a fax using pc? What improvements are needed by my O.S. (Vista Home Prem.64 bit quad) to allow the sending of a fax? Scanner/printer is installed.

  Using comcast for internet cable. Service not switched. Built in soft modem Agere Systems PCI-SV92 PP. Epson CX8400 printer / scanner installed. What additional software/hardware, or fax service subscription may I need? Any suggestion is appreciated. Thank you, Ken. Ken

  http://www.Microsoft.com/Windows/Windows-Vista/compare-editions/default.aspx

  As you can see from the link above of MS, Vista Home versions do not come with Fax software.

  Home Premium, you can only change it to Vista Ultimate, which has included Fax software.

  A less expensive way is to buy 3rd party software Fax: http://www.snapfiles.com/reviews/Snappy_Fax_2000/snappyfax.html

  Snappy Fax 2000 allows you to send and receive faxes from your computer. You can use your scanner to scan documents and then sent a fax to any fax machine, or use the print command other applications to use the virtual fax printer, allowing you to send faxes directly from most Windows applications. In addition, the program also supports faxes sending via the internet, filtering of unwanted faxes and transfer incoming faxes to other fax or e-mail addresses. Additional features include import address book, faxes by email (with zip for images support), OCR, spell checking and much more.

  See you soon. Mick Murphy - Microsoft partner

• OfficeJet pro 8600 vertical black lines printing when you use the scanner/copier of SMA

  I have an Officejet Pro 8600 Plus model N911g that I got a year out of warranty. Worked perfectly until this week when I scanned approximately 50 pages through the ADM.  During the process of digitisation of the black vertical lines began to appear on documents that are scanned or print (color or BW) through the ADM.  Scanning or printing directly from the scanner glass is not the problem.

  I checked, cleaned and cleaned all (rolls, strip scanning, scanning glass) it is possible via the information provide in these forums from other veins knows on their production lines.  No change...

  I unplugged the printer all the network and fax cables and tried scanning or copying with the power of the device, NO CHANGE.  Don't know what the next step might be other than the factory reset (don't have documentation on this process).  Additional suggestions would be appreciated.

  Bcrigler

  Hello

  Please go through this document from HP, this problem is because of the dust or some contamination on glass scalled

  http://support.HP.com/us-en/document/c02881567

  Here is a video, the printer is not JO 8600 but the mechanism is the same, then even this video will be a great help

  http://www.YouTube.com/watch?v=CGn7FJvH8sE

• When I want to copy or print from the scanner on my HP4500. It comes out all black.

  See above

  There is no paper on the scanner screen - the message says that it is

  Hi @OKC,

  I see by your post that when scanning, they come out all black. You also receive a message that the paper is on the scanner bed where there is none.  I can help you with this.

  I have provided a document to make a reset of the printer, the scanner, the lid and ADF glass cleaning.

  Reset will most likely solved the problem. Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  Do not take into account the title.

  If the problem persists, please update the firmware of the printer. HP Officejet 4500 All - in - One Printer - drivers G510g.

  Please provide detailed results if you're still having problems.

  Good day!
  Thank you.

• Mac Book Pro recognizes the printer, but not the scanner on my Photosmart C4280 all-in-One.

  I asked this question last October and it was answered and everything worked perfectly.  Now, my computer says "no scanner is selected."  I was clicking on and clicked on "reset printer", now it doesn't even brings a touch of the scanner click on!  I tried to look back on the post of October 2010 who helped me before, but the solution had me uninstall the HP application and now it is no longer in my applications.  What should I do?  I don't know if I'm explaining this very well.

  Thank you.

  We will restore the print system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• Unable to launch the scanner on Epson AIO Printer

  I had my Epson WF3520 AIO printer for some time and had no problems with printing and faxing.  However, I'm unable to scan anything.  The printer indicates that there is a communication error when the functionality of the scanner is used. I have checked the installation disc and run set up without success.  I contacted Epson and their tech support could not fix the situation and referred me to Windows.  There is an error "1068" which indicates that Windows does not start acquisition for imaging scanners.  Is this a quick fix, I can do myself or do I get technical support for Windows to sell me a maintenance contract that they may or may not solve?  I had this printer AIO for 2 1/2 years and have lived without the function of scan, but it would be nice to have.  Any comments would be greatly appreciated.  Thank you!

  This error appears when printing software does not start with Windows.  If you have the software installed, then check in msconfig > startup or > Services (after hiding all the MS Services) to see that all the elements of Epson are verified, apply and then restart.

  If not then go to the Epson Support Web page downloads for your model, download the software, install it and allow it to boot with Windows so that the software will be waiting when you want to run a scan.

  Scanning can still occur with only the printer driver of base that installs normally when you plug in the printer, but you need to open Windows Fax and Scan Utility to start it.  If the printer is not detected, you will need the software of Epson.

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.