The window does not load and the points on a single screen.

Similar Questions

• Windows does not load and displays a black screen when it is connected to the power supply

  Original title - Windows Vista running on my laptop Sony VAIO

  Trying to turn on my laptop using the built in battery nothing happens.  When the laptop is connected to the power supply and turned on Windows does not.  It shows something in the sense that it does not properly off.  It tries to load back to a system restore point before the last stop, but seems to fail again during this process.  All that is displayed is a black screen. Currently the power on light is on, the battery light is on, but the drive activity light is off.

  Yet once again, I switched on the laptop and finally the Startup Repair process is automatically called.  After the display of the bar to attempt repairs, the system has been repaired successfully.  As a result, the I ran my Norton anti-virus, followed by Windows Updatesoftware.

• After you type in username, Windows does not load. I just get a black screen, but I can pull up the Task Manager.

  Windows will not load

  Start your computer in safe mode and try to system restore to return your system files and settings to an earlier point in time, and when it was working fine. Also search for viruses and other malware

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Try scanning using this program to ensure that the malware has been removed:

  http://www.Malwarebytes.org/MBAM.php

  Run the malware removal tool from Microsoft

  To run the malware removal tool, click Start - type MRT in the search box

  You should get this tool and its updates via Windows Update

  To download the visit of mrt

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

• After the reinstallation of Windows 7, it does not load and restarts continuously

  I recently formatted and reinstalled Windows 7 on my Sony Vaio PCG - 71913L LAPTOP however the operating system does not load and his bicycle at all times. From the time turned the first page initialization comes then it stops and restarts and continues to go through this cycle. Is there a soloution to this question

  Check your BIOS settings. Have you installed the drivers of Sony devices?

  Test your hard drive and memory.

  First run Memtest86 +:
  It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
  sticks are bad or the values of the SPD in the BIOS are correct.
  Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), if no error then your RAM is OK.
  http://www.memtest.org/
  Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
  http://www.overclockers.com/forums/showthread.php?t=409152

  Hard drive test:
  If you do not know your readers of the brand and model, try "Speccy",.
  It provides information from the computer/system in detail:
  OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
  Note: Option RAM indicates number of slots, DRAM Timing.
  Works your memory speed (frequency). The nominal frequency of your memory.
  http://www.Piriform.com/Speccy

  Test your player - create a Bootable CD:
  Ranging from 5 to 20% (depending on the manufacturing) new hard disks are defective.
  Test your drive with the car manufacture utility.
  If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
  (bootable CD) and check bad sectors:
  http://www.Seagate.com/WW/v/index.jsp?locale=en-us&name=SeaTools&vgnextoid=720bd20cacdec010VgnVCM100000dd04090aRCRD

  For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

  Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
  Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm
  Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
  Diagnostic tool available for use by customers who feel their Toshiba brand Fujitsu hard drive:
  http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities
  Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
  Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
  http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

  Sony product support: http://esupport.sony.com/US/perl/contact-land.pl?mdltype_id=1, 72,70,24,66,9,26,5

  Sony device drivers: http://eSupport.Sony.com/en/VAIO

  Enter your model number or leave Sony scan and detect your model.

  If you have Windows 7 drivers then download to a folder on your hard drive and install all of them, starting with the mother/chipset, SATA, Firewire card drivers (1394), LAN, Audio, etc, and so on.

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For help to install windows 7 on your VAIO, you can contact the support team Vaio 1-888-476-6972 they will be more than happy to try to help.

  J W Stuart: http://www.pagestart.com

• I have windows 8 and ip4000. The software does not load and it doesn't seem to be a driver for 8 64-bit windows. What can I do?

  I have windows 8 and ip4000.  The software does not load and it doesn't seem to be a driver for 8 64-bit windows.  What can I do?

  Hello

  I had the same problem.  I was able to get around by loading the driver for Windows XP 64 bit from the Canon web site and then install the printer using the normal menu of 'install new printer' Windows 8.  If I remember correctly, I could have gotten an error message or two, but the printer appears in the printer window and ran very well.  Hope this works for you as well.

• I loaded the new update for Firefox today and received a message from 'need to reboot to complete the installation'. However, even after restarting several times the update does not load and he always invites me to restart my computer.

  The update does not load, and I can't "remove" program to my computer and reload as the same (needs to restart to complete the installation) error message keeps appearing even after several reboots.

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 8.0.x: http://www.mozilla.com/en-US/firefox/all.html

  Uninstall your current version of Firefox if possible.

  • Do not remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup

• Satellite A215 S6816 won't mode BIOS and Windows does not load

  Hello

  I'm helping a friend to determine what the problem could be on his laptop satellite A215 - S6816 Windows does not load on start up and it says "press F2 for Setup, press F12 for the boot device selection menu" but niether one of these options works no matter what I do.

  I tried them on start up but nothing happens. It will be not just to enter mode BIOS or the menu. It will say please wait or entering the menue, but yet again, nothing happens.
  What else can I try to enter the menu, either to get the system to get windows to load? This could be a motherboard problem? Hard drive problem?

  Thanks in advance.

  Hello

  If you are unable to access the BIOS, or to load the Windows operating system, and then a serious hardware problem is present.
  Eventually he s a motherboard related question that means it could be a faulty motherboard or just a small part of the motherboard as a ROM chip for example.
  I doubt this can be fixed without help the ASP.

  There is thus only one real solution. go to ASP. Guys must verify the simple parts to determine what part is affected.

  Good luck

• After back to Windows 7 from Windows 10, my Windows will not load and everything freezes in safe mode.

  Original title: backup Windows 10 for windows 7

  Hello

  can someone help me please. We have recently upgraded to Windows 10 but didn't like it. Having had the opportunity to go back to Windows 7, I did. Now Windows does not load. When I run the system repair, it works and when you scroll the dialogue it passes all the tests, but said a patch prevents starting windows.

  I tried to go into safe mode, but all crashes and I do not have a slider and it goes to a screen saver.

  I have limited computer please not too technical answers, if you want to see something then please explain to me how do.

  Best regards in anticipation.

  Valo

  Hello

  Thank you for contacting Microsoft Community

  I understand that you are facing the problem with win 10 in SafeMode as normal mode

  Please answer these questions to better understand the issue and help you:

  1. You have the disc of windows 7 installation?

  I want to suggest everything first, disconnect any external devices (Cd/DVD, USB key, webcam, memory card reader, etc.), except the mouse and keyboard and try to start.

  Now press Ctrl + Shift + ESC key combination to check if the Task Manager opens.

  If you have the Windows 7 installation disc, try to run the Startup Repair tool once more with the disc.

  If this does not help, get in safe mode with command prompt and use startup recovery tool to repair windows startup problems

  https://support.Microsoft.com/en-us/KB/927392

  Hope this helps

  Thank you

  Amplifier. Mayank Chadha

• Acer Aspire 5610Z Windows does not load... No recovery cd

  I have an Acer Aspire 5610Z Windows does not load, when I use the F10 it comes up says:

  Modify the Windows boot option for: Microsoft Windows Vista

  Path: \windows\system32\winload.exe

  Score: 1

  Drive hard b44bb44b

  [/ noexecute = optin]

  That do I don't know...

  Thank you

  "When I start the laptop, 1 screen 2 times, beebs gives me the whats available in the computer, Press (F1) to resume, or (F2) of the installation.

  I wish that you mentioned the "beeps" in your original question.

  When you start a computer, you will receive a 'beep', which indicates that the motherboard has spent his own self (POST tests. Power on self test))

  'beeps' (plural) normally indicate a hardware problem.

  Read the Information on the links about different codes "beep":

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  Contact the Acer Support if under warranty.

  http://support.Acer.com/us/en/default.aspx

  If it is not under warranty, contact a repair shop, local.

  See you soon.

• After that I put my password, it indicates that my personal profile does not load and it gives me a temp

  original title: Login - personal profile

  After that I put my password, it says that my personal profile does not load and it gives me a temp.  He told me to go in the event log or contact administrator

  Your computer has recently made an update? There are now three consecutive profile simillar problems in this forum. I checked my update and there are 13 important updates, I invited I have to wait. I hope that someone could come up with the cause. The problem is serious, which can lead to loss of your files.

  Vista - user - logged on with a temporary profile profile error

  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  I hope I could help

• How to restore factory settings when Windows does not load?

  I'm recovering from the laptop (Dell Inspiron N5010) friend who has been infected with a malware ransom (ICE Cyber Crime Center Backdoor.Win32.ZAccess.erds). I used the Kapersky rescue disc to remove the virus from the ransom but now Windows will not load and I suspect that the MBR has been affected.  At startup, the Dell logo appears and the window loading appears briefly, but then you have the 'blue screen of death' flashes and the cycle repeats.   The bsod error is:

  A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS BEEN SHUT DOWN TO AVOID DAMAGE

  ON YOUR COMPUTER

  IF THIS THE FIRST TIME YOU ' VE SEEN THIS STOP ERROR SCREE.

  RESTART YOUR COMPUTER. IF THIS SCREEN APPEARS AGAIN, FOLLOW

  THE FOLLOWING STEPS:

  CHECK FOR VIRUSES ON YOUR COMPUTER. REMOVE ANY NEWLY INSTALLED

  HARD DRIVES OR HARD DRIVE CONTROLLERS. CHECK THE HARD DRIVE

  TO MAKE SURE THAT IT IS CORRECTLY CONFIGURED AND COMPLETED.

  RUN CHKDISK /F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART YOUR COMPUTER.

  TECHNICAL INFORMATION

  STOP: 0X0000007B (0XF78D2524, 0XC0000034, 0X00000000, 0X00000000)

  The F2 and F12 keys work, but the F8 key will not open the "Advanced Boot Options", so I can't to the "Restore Dell DataSafe and emergency Backup" or any other advanced option.  System Restore will not work either.

  I ran chkdsk and sfc hard disk (via the Kapersky Rescue disk) and neither solved the problem.  Then I copied its data on the hard drive.

  I would like to restore the laptop to factory settings (assuming that it would be better to reinstall Windows because the drivers Dell would be included already?).   There is a folder on the hard disk called "emergency" and contains a Backup*.exe file and several Backup*.dsb files.

  Is given this scenario, possible to restore to factory settings?  Or am I forced to reinstall Windows from scratch?

  What version of Windows?

  7b error message indicates the operation SATA (SATA Mode) setting got changed in the BIOS Setup or possibly the hard drive may be roasted.

  Restart, and then press F2 before Windows starts to load to open the BIOS Setup. Look for the option SATA or SATA Mode operation (models name it differently).  I don't see the BIOS screen options in the online manual, but the options for this parameter can be: RAID, AHCI or RAID Autodetect / ATA. Post back and we say exactly what options are available and how she got now.

  If you are in the BIOS Setup, also find the Boot Sequence option and make sure that the internal hard drive is ranked first on the list. If it is not first, move it to all first, save the changes and exit the installation program. See if it boots now.

  If you reinstall Windows by using a Windows Dell reinstall drive, you should not ask for the product key. It should install automatically by itself. HOWEVER, you will need to have the product keys for all the other apps that you want on this system, for example Microsoft Office, so make sure that you have the product keys and the floppies to install before you clean the hard drive.

• When I start my computer I saw a MSI logo and then the screen goes black and Windows does not load.

  original title: HELP ME PLEASE!

  (I am running windows xp) I need help! I tried installin linux ubuntu for netbook 10 on my msi u100, but everything was wrong when my little brother from my FlashDrive from the port, it has been installin linux from. so now when I turn on my computer it will not load windows, it will just have the msi logo and then the screen goes black and it does not load windows xp.

  Netbooks and also most computers these days, do not come with an installation CD. Instead, it has a recovery partition. Assuming that you have not deleted the recovery partition,

  Take a look at this:

  http://randompastime.blogspot.com/2010/02/restoring-MSI-wind-U100-NetBook-to.html

  Hope this helps

  Post back if necessary

  __________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows defender does not load and cannot download Adobe flash player

  I think I have a security problem with windows defender, because it does not load. In addition, a file I have download must have the permissions of the administrator to continue, which was also changed and I had checked him to ask permission. For this reason, I can't download adobe reader. It has an error that keeps coming back whenever I try to download it, and after I executed the file, he's just in a display type of backup file, where it was downloaded, but it will not work on the second stage, when you need the permission of an administrator. I has not yet come. Can someone tell me what to do?

  "It is said that I need adobe flash player.

  Download and run the Flash Player uninstaller program.

  http://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Then download and install Flash Player; After unchecking installing Chrome and Google toolbar option:

  http://get.Adobe.com/flashplayer/?promoid=BUIGP

  If the problem persists, you may want to ask in the Forums of community Flash Player:

  http://forums.Adobe.com/community/flashplayer

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  I have the fire threat and no other protection against the virus.

  Malware to disable your firewall and your safety programs.

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Installation of FSX does not load and gives me two choices: remove 1 or 2 repair. Whichever one I'm taking, I get an error code 1605

  It does not load on my calculation of FSX Deluxe or gold. a screen asking me to choose to repair the existing files or delete all files.  Whatever it is I want the same message comes back, this software and only repair or delete files when the files have been installed previously, and then I get an error 1605.  I tried the resetsldl.exe command and it say I was seccussful in the license reset, but when I try to install the software, the code 1605 back.  bought another copy and the same thing happens

  Please do not let your Windows version a secret.

• My firefox does not load and I tried everything. What should I do?

  Hi, here's the problem somehow an hour ago my firefox just stopped working, it does not load any page, all I have is a blank page and the signal that firefox loads, no errors, no nothing. I tried the steps detailed here:

  https://support.Mozilla.org/en-us/KB/Firefox-cant-load-websites-other-browsers-can

  Did not work.

  Also, I thought first of all a problem of the internet, because the pages worked very well a momment and the other nothing worked, I called call support my Internet access provider and we did an uninstall of root of firefox, that didn't work either, we also checked the ports to Skype to see if the traffic was slowing down Firefox , but this isn't that.

  Can you help me?

  Thank you!

  It was very good work. Play well.
  Please report your last post as solved while others will know.