Toshiba 46TL938: no noise or interference SCART ext1 and ext2

Similar Questions

• TV Toshiba 46TL938 - black screen but its works

  HI, my turn to tv screen (all black) but television continue to operate (noise, remote ecc).
  I think the inverter led Board is broken. The model is my 1 b SSL 460_3E very difficult to find. Are there other compatible boards?
  (400... ssl ssl 460 3rd 1a... ect)? Thank you

  Hi I have the same problem on my TOSHIBA 46TL933, and when I search on the internet, I saw that a lot of people have this problem. But at TOSHIBA is not made of new parts. And now, what we need to do? I bought my TV fo 700 euros and 2 years later, I can't use it?

• Toshiba 46TL938: 3D playback choppy when PC to TV via HDMI

  Hello

  I have a very specific problem and cannot identify exactly what the problem maybe. In short:

  -J' have a 3D film which is read by VLC but also KMplayer.
  -On my monitor 23 "1080 p via HDMI, the film plays well enough and smooth.
  -On my Toshiba 46 "HDTV playback on 3D sometimes accused, exactly the same thing when a computer cannot handle the load and the shifts on video playback.
  -J' tried to put the film on a USB and connect it to the TV. Then playback of 3D on the TV was really smooth without any lag.

  If the facts are executives work well on a HD 23 "(playedback with VLC and KMplayer) monitor, but also run smooth on my laptops screen."
  Fact is also that the same movie plays smooth a Flash USB plugged into the TV.

  I tried with another movie (no 3D) listen to from my laptop via HDMI on my TV. This worked pretty well without any lag.

  (1) so my main question is if the movie is not correct, why play it right back via a USB, but not through my laptop.

  (2) in addition, if my computers vga portable would be unable to handle the 1080, I guess that reading also lag on my monitor 23 "which is also 1080.

  I have really no idea if it's the movie, TV or vga that has the problem.
  Any suggestion would be great.

  Thank you in advance.

  Hardware information:
  TV: Toshiba 46TL938
  Notebook: Xi of Fujitsu Amilo 2528

  Hello

  I put t thinks that his TV show.
  First of all using USB flash memory, the movie is managed by Toshiba media player and second the data does not need to be send via cable.

  The notebook movie streaming, you send the signal to the TV via an HDMI cable. 3D movies contains a lot of data and this could affect the playback quality streaming of data from one device to another.

  So if you have seen some interruptions during playback, it could be linked to the HDMI cable.
  If your HDMI connection is capable of 1080 p and/or your TV is capable of greater than 50 Hz refresh rate, need you a cable of category 2. Conventional HDMI/DVI cable may not work properly with this model. Also try a short cable (1.5 to 2 m)

  You should also consult the user manual * 88.* page
  The HDMI on the TV inputs accept the VGA, SVGA, XGA, WXGA and SXGA signal formats that are
  as shown in table _page 88_ VESA-compatible.

  Since some PC and HDMI or DVI input signals of devices which differ of the resolution and frequency that are described in the table, the following phenomenon can happen; _incorrect display, detection of fake format, failure of position photo, blur or judder_.

  In this case, set the monitor output on your PC, HDMI or DVI device to conform to a signal in the table you will find in the user manual.

• Changing movie game mode picture of USB on Toshiba 46TL938

  Hello

  I tried to play a movie from the USB on my Toshiba 46TL938 yesterday.
  Unfortunately the reading has had a lot of opera and probably I didn't see anywhere near
  playback 24 p.

  On my TV, I have the clearscan completely off, but it seems that the toshiba media player uses its own default settings. On my computer, the movie played without any problems, so the file was quite well.

  I finally connect my computer to my TV to watch the movie decently.

  You have any suggestions on this subject?
  I could not find any additional setting that would solve this problem.

  The manual provides information on the use of TV Media Player (page 65)
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL938-4046-English.PDF

  During playback, you can adjust the functions of the menu of the image and sound in the Quick Menu
  But these elements are different depending on the current mode.
  Play movie USB the quick menu does not contain the same elements as when watching a TV show or of the external entry-stop or one-stop 3D photos

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• Capture from the noise of the adjacent area and apply to the uniform color fill... How?

  Hello

  CS6

  I have a space that I have to fill it with a color that is adjacent to the area of color, that I Express and need to have with this sound of colors to another it will look artificial.

  I ejecting the color and it dumped in the area I need to fill, I know there is some sort of noise from a picking area and then apply the color noise I have made by dumping the pipetee color (alt backspace) but do not remember how its done.

  I don't have enough color to use the stamp tool, sometimes if you have a large space to fill with a uniform color and only a small area of the photo with this color to use, this pipette and the corresponding sound is the best way.

  Merlin

  apply > filter > other > high pass

  What parameters within which should I use, default is 10

  It depends on the structure you want to 'catch '.

  It goes the same for the filter > other > H Offset is 0 v 0 areas Undefined chocie of transparent value, repeat edge pixels and wrap autour (he has been on the enveloping)

  To make the seams visible any setting above a few pixels should work; traditionally half liked the dimensions, but it is not really necessary to use exactly half the width and height.

  Layer > layer Style > Pattern Overlay, now it appears last in the line. What happens if I wanted a model named and made for a long time?

  Click the icon and select from the inlay.

  

  How can I use this to paint a color and have with this model that I paint?

  Paint on a layer with the Pattern Overlay (value linear light etc.)

• Toshiba Tecra 9000 noise

  Hi all

  I just bought the Toshiba Tecra 9000 Pentium 3 1 GHz, 256RAM of ebay. The problem is that after the start of some video applications or sometimes even opening new Web site which is in Macromedia Flash, I hear a strange noise, which I think is the hard drive. The sound is similar to the CDROM when you put there CD and he starts reading.

  Maybe someone has any suggestions about who and can help out me. Maybe I have not configured something right.

  Thank you in advance.

  Hi mimi,

  have you bought also the recovery and the tool & Utilities CD with the laptop? To exclude a software failure, you need to retrieve the laptop!

  If you do not, you should your system clea. Perhaps it is a program which read or write to the hard disk at high speed!
  Theo Bye

• Toshiba 46TL938: some annoying movement artifacts

  Hello

  I bought a 46tl938 and I noticed a few annoying artifacts around a subject in motion on a static background. Is this a known problem and is there a solution or factory default?

  Thank you

  In my opinion it of difficult to say if she s LCD panel problem or maybe a low quality signal or maybe issue of display settings.

  In my opinion, you should test the TV as part of a Blue-ray player.
  Watching a Blu - ray movie and check the picture in HD quality.

  Light sensor: off
  Color temp: normal

  picture mode: standard
  Panel brightness: + 22
  contrast: 85
  brightness: + 20
  color:-13
  color: on
  automatic light sensor: WE
  dyn. backlight: low
  Black / White: medium
  Resolution +: on
  Clear Scan: standard

  In addition, make sure that you are using the latest firmware

• Toshiba 46TL938 - video stops always at 2 h 6 min

  HI, I have some problems with 46TL938, the version of the firmware 7.0.21.6.1 Sep 13, 2012 - 65.8.19.3, MBOOT version 00646225

  1. all mp4 (ie. x 264 codec) files are stopped at 02:06:27 when played by USB or network server. I tried different videos, different formats etc little question takes place only during playback of mp4 files. In the case of files mkv with x 264 codec issue does not occure. Any chance to solve this?

  2. in the playback of a video from a server network (in this case, Win7), subtitles are not visible. If the same video & subtitle are played from USB, everything is ok.

  Hello

  I m not very well why this happens, but the TV supports the MP4 format.

  VIDEO MP4 files must have an mp4 or m4v extension and supported video codecs are:
  H.264 (MPEG-4 AVC)
  Part12 MPEG-4: 14

  Supported audio codecs mp4 are:
  MPEG-1/2 Layer 3
  MPEG-2/4 LC - AAC
  MPEG-4 HE - AAC

  AUDIO MP4 files must have a .m4a extension and the audio codec supported is:
  MPEG-2/4 LC - AAC

  So maybe the files are not encoded properly. You check this box.

• Toshiba satellite, no noise all the indicators don't show n no problem?

  I have a toshiba satellite A 135 S4407, there is no sound, ive downloaded drivers etc all indicators say everything is ok?

  Hello angelocotto,

  If you have already install the drivers and still does not work, the issue may be caused by the sound card. I suggest you follow the link below and run the troubleshooter and check if you are able to resolve this problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  If the sound card is not detected on the computer, you will need to contact the manufacturer of your computer to help you better that the issue may be related to material:

  Thank you
  Irfan H, Engineer Support Microsoft Answers.

• WiDi does not work on Toshiba 46TL938

  Hey there,

  I tried to access the WiDi on this TV, but it does not recognize the laptop.
  I also tried to search the laptop to the TV but the 'list of pc' in TV was not available... in gray letters.
  We hope to get a response.

  Thanks :)

  Hello

  I doubt that the issue of the Intel WiDi is related to this TV.
  Everything you can do on this TV is to verify if the Intel WiDi is activated in the menu of TV s.

  Press QUICK to open the Quick Menu. Intel Wireless Display and click OK. A prompt appears on the screen. Then, select Yes. Launch the Intel WiDi on your PC software and select scan available adapters. Name of the device Intel WiDi and list of identification will be displayed on the PC screen.
  Select TV which you want to connect. Connection will be shown on television.

  If you connect your PC to your TV the first a 4-digit code appears on your TV screen. This code must be entered in your computer to authenticate the connection. If authentication has already occurred connected to Intel® Wireless Display. Please wait will appear on the screen. Once the Intel WiDi connection has been completed, the TV screen reflects the content shown on the PC screen.

  _NOTE: _
  When Intel WiDi connecting, the PC must have power turned on.
  When the InteL WiDi software is active, other applications may not be usable.
  Intel WiDi of the TV device name is modifiable by the Intel WiDi software.
  If the PC has been idle for a while, the Intel WiDi connection is disconnected automatically.

• Toshiba 46TL938 connection + Galaxy S3 via DLNA

  Hello

  I have trouble these days connecting these two devices via DLNA.
  Unfortunately the manual was not enough to help find how it should be configured.

  How can I configure and share my content on my Galaxy S3 via DLNA

  Thank you.

  Your TV and your phone must be in the same WiFi network.
  In addition, if you want to stream data to your TV, the TV must be set as DMR (Renderer DLNA CERTIFIED)
  If it s defined as DMR TV can read content in a DMS (Server DLNA CERTIFIED) for example your smartphone.

  In the 47 user manual page, you can find an instruction how to perform the installation of Media Renderer

• Toshiba NB550D no noise from subwoofer

  There was no game sound of the subwoofer to my nb550d (the speaker below) although I turned the volume up.
  Any people has this problem and how you can solve this problem?

  TKS

  Hi mate

  What subwoofer do you mean?
  The NB550 does not support the subwoofers

  Some models are equipped with a loudspeaker that is placed at the bottom of the device, but this isn't a subwoofer this speaker makes sounds generated by the software and audio alarms this condition low battery, generated by the system

  So normally you should hear just short beep from the speaker.

• Toshiba 46TL938 can't update firmware

  I got a message that a new firmware is available.
  When I press Ok to continue, television plays the channel normally but does not respond when I press any key on the remote control.

  I expect more than an hour, but nothing happens.
  Then I unplagged the tv and when he if turn on again, I saw the old firmware to the system.
  I tried once more and I had the same problem.

  I'm doing something wrong or there is a problem?
  Please describe step by step valuation process to confirm I don't hurt.

  It is by TL series problem
  1-reset the TV menu - Configuration - System
  2 - go through the Setup again, then go to SW update it will work 100%

• on my lap top computer hardrive (toshiba), a scratching noise is continuely on, how can I do stop!

  I already did: reboot with backup settings (does not work)
  I read somewhere in the search for answers:
  the fan in the lap top is stuck somehow?
  This sound is so loud and relentless!  I HOPE SOMEONE CAN HELP ME WITH ANSWERS!
  -signed, HELP

  Hello

  The fan may need to be replaced, or something may be stuck. That's why I suggest you to contact the manufacturer for material support.