Toshiba Store Alu 3.5 "1 TB help

Similar Questions

• Toshiba StorE Alu 2 s 1 TB 2.5 USB3.0 SATA controller card "external HARD drive

  "The controller card of my" Toshiba StorE Alu 2 s 1 TB USB 3.0 2.5 "Portable external hard drive" malfunctioned. I replaced I replaced it with Western Digit controller card but my data are not displayed using this USB-SATA controller.
  So I think I have the same needs as my original. So how and where can I buy this card controller controller at Toshiba and my data appears as been replaced by the same?
  Kindly reply me as soon as possible.

  It is always difficult to find these parts. In my opinion, you should contact the nearest Toshiba service provider and ask for help.
  They should be able to get such parts.

• The E of Toshiba STORE alu external hard drive.

  Hello

  I have a laptop Toshiba P500-16 t.
  Yesterday, I bought a disc external hard Toshiba (E STORE alu 750 GB USB 3.5 "), it works perfectly, but today the red and blue light no longer works, the hard drive still normally works well.

  Try it in another PC or another USB Port, if the LED still does not work then you can go back to the place of purchase for a replacement drive.

• Re: Toshiba Store Alu 3.5 "1 TB HARD drive works only with Windows 2008 64-bit

  Just bought this as a backup device for Small Business Server 2008 running on Windows 2008 64-bit. However it does not? Are there drivers anywhere for this or it is simply not supported and I need to buy an alternative solution?

  Plugged into my laptop Windows 7 64 bit and no problems.

  Someone else had the same problem?

  Hello

  Unfortunately, there is no other software by download.
  I checked the driver page Toshiba in the Options area but didn't find anything

  AFAIK it of a plug & play HARD drive if you n t need any software to recognize the HARD drive

  There may be a password.
  Try this:
  Connect your HARD drive to the computer when the HARD drive is working
  Select the CD drive with your browser (password)
  Run the ONSPCLCK.exe
  Select 'Options '.
  Select "Disable security password"
  Enter your current password
  Unplug the HARD drive
  connect the HARD drive

  Now, it will work, but with no password protection. Perhaps it would work

• Toshiba Store Alu 3.5 "1 TB external USB HARD drive does not

  I turned on my laptop with my hard drive is connected.
  It flashes blue and everything and the computer recognizes that there is a usb device it but it freezes Windows Explorer.

  When I tried to click the hard drive icon, it says the device is not accessible.
  It does not unusual noises high expectations or clicks. I tried to unplug and every bit nothing helps.

  I read somewhere else that it can be a power supply problem? (a few days ago I had a really small power cut which lasted a second...)
  I really hope that this isn't a drive failure hard because I have 250 gb of music in there! Should I send in repairs?
  If so, my data would be deleted? I had this for only less than a month.

  Thanks in advance.

  > It seems to work on other computers without problem, but on mine, it is not
  In such cases, it s not a problem of disk HARD but eventually its computer number you and, eventually, the OS does not contains some drivers / extract, etc. eventually the operating system must be updated

  Welcome them

• STORE ALU 3.5 "light blue showing but not connected.

  I have a HDD external Toshiba Store Alu. I have problems to connect to my computer recently. It was working fine until 2 days ago but now all I have is light blue, but I hear that the drive does not work. The last computer I logged in, I had a flashing blue & red light which I know means it is not getting enough power - since then, it does not work on any computer.

  Any ideas? If the disc is defective, I can get the recovered data?

  Thank you

  Hello

  I m not owner of this external HARD disk but it sounds a bit like a hardware malfunction.
  Maybe the HARD disk has crashed in such a case, you would lose data

  It s a 3.5 HDD right?
  Well, perhaps you could remove this disk of the case and could connect to a HARD drive controller internal office PC.
  You can check if the BIOS recognizes the HARD drive and internal hard drive

  But if the BIOS would not recognize the HARD drive then it would mean that the HARD drive is dead!

• STORE ALU, 1 TB 3.5 "only appear not

  Hello

  I have a Toshiba STORE ALU 1 TB 3.5-INCH that was working fine until a few days ago, when we went.

  Now, when I turn it on, the indicator it works (turns red first and then to blue), but the drive does not appear on one of my PC (Windows).

  I tried to connect to all the different USB ports but no luck.
  I can't see it in the device either Manager.

  Any suggestion would be appreciated...

  Thank you

  Shankar

  Hello

  Have you tried to plug the drive external DRIVE on another computer?

  I found this FAQ from Toshiba on the Toshiba Stor.E Alu (3.5 "- 1 TB - USB 3.0")
  http://APS2.toshiba-tro.de/KB0/SPD4603LW0000R01.htm

  It is said that the AC adapter or the AC adapter cable may be broken
  But from my point of few, the HARD Drive LED (indicator) show the status of the HARD drive.
  The HARD disk is turned on and that for this purpose, the power seems to be correctly provided on the HARD drive.

  This means that the cable and the AC adapter should be OK.
  I think that in your case the HARD disk (inside) may be broken.

• Toshiba Stor.e ALU 2 s 3.5 "does not work with my XBOX

  Hi all, first timer here

  Just got a Toshiba external hard drive as a gift. Wanted one for a while, mainly to use with my XBOX 360 to watch movies and listen to music on. However the xbox does not pick up the hardrive (connected via USB), but he'll be looking for my friends generic hardrives. Anyone has any idea why?

  It looks like a fairly recent model, here are the specs in the (very rare) manual that came with the hard drive:

  Toshiba stor.e 2 s 3.5 ALU "
  1 TB
  USB 3.0
  Backward compatible with USB 2.0 (I don't know what that means "backward" here)

  I'm not a computer person. I use the laptop to surf the web, media, applications etc, basic College work. Few of my friends have external hard drives, mainly cheap generic brands of the average and all work fine on my XBOX, just plug-and-play.

  If anyone has any advice on how to do it, or even where to go woth my question I would really appreciate it.

  TIA
  Creamy

  Hello

  In my view Backward compatible means that you can use this HARD drive with USB 2.0 ports. But the fact is that USB 3.0 port provide 900mA and USB 2.0 only 500mA.
  I guess that's your HARD drive
  http://www.Toshiba-multimedia.com/en/store-externe-Festplatten/ALU2-s-35/
  According to specifications, you can find info that this HARD drive should 900mA

  Therefore connect the HARD drive to two USB 2.0 ports using a USB Y cable.
  I think this will help you.

• Windows 7 can not find my Toshiba STORE. E. ALU 3.5 "

  LS,

  I can't connect my external hard drive - a Toshiba STORE. E ALU 3.5 "to my Windows7 system.
  With XP I had no problems. How can I connect this drive to my Windows 7 computer?

  Thanks for the help,

  Neusbeertje

  Did you test all the ports on your PC/laptop?
  You have the posibility to test on other laptop or PC with Win7?

• Toshiba Stor.E Alu 2 s 1 TB HARD drive recognized as a HARD drive fixed

  Problem:
  New external "TOSHIBA Stor.E 2 s Alu 1 Tb PA4265E-1HJ0" in my Windows 7 x 64 is recognized as a hard drive fixed. Hereby, it is impossible to make his withdrawal safely.

  Issue.
  How to create this disk as a removable media device?

  Thank you

  Please see this FAQ from Toshiba:

  + Remove the hidden partition of VCD (Virtual CD) on the STORE. E ALU 2 s and STORE. External hard drives STEEL O +.
  http://APS2.toshiba-tro.de/KB0/SPD4603LR0000R01.htm

  Your comments would be appreciated

• Store alu 1 TB - 8.3 filenames

  OS: Windows Vista Home Premium SP2
  PC: Laptop HP 6735 s

  Yesterday I finally have unboxed my StorE alu 1 TB and started to copy files from my portable 250 GB Medion drive-and-Go for it.

  Some files and folders have now received the old as 8.3 file names "blahbl ~ 1.zip".

  The Toshiba and are both the Medion formatted FAT32 (the Toshiba out of the box).

  Has anyone encountered this before and figured out how to fix it?

  Something to do with the SATA drive?

  Also, I noticed that some files and folders that are copied in the store will not copy to the Medion or my laptop - even when I try to copy one at a time.

  UH... help?

  > Both the Toshiba and the Medion that are formatted FAT32 (the Toshiba out of the box).
  > Has anyone encountered this before and figured out how to fix it?

  Hmm, as far as I know you could disable the creation of 8.3 name on NTFS partitions:

  Type of RACE: * fsutil.exe behavior set disable8dot3 1 *.

  But I don't know if this will be functions with Fat32 Mr. in the worst case, you will need to change the NTFS file system

• Toshiba stor.e 1 TB HARD drive no longer works

  Hi all

  I have a new Toshiba stor.e 1 TB HARD drive and was transfer photos and music to it and all was fine, I ejected it but when I plugged it back I get the message:

  F: is not accessible
  Data error (cyclic recovery control)

  A quick search and it says that run cmd and chkdsk but that simply says:

  The type of the file system is RAW
  CHKDSK is not available for RAW drives

  Please can someone help?

  Thank you

  According to the article in the Microsoft Knowledge base, the data error (cyclic redundancy check) - indicates that the operating system has found a car with bad sectors or some other intermittent problem.

  In my opinion, you should go to disk management and check if the external HARD disk is listed:

  -> Panel-> administration-> computer management tools--> disk management

  If his list, you can change the file RAW to NTFS format
  Then you can perform a chkdsk command.

  But you lose the data, change the file format.

  As far as I know, using the command: + convert DriveLetter: /fs:ntfs + (drive letter + should be replaced with the drive letter of the USB HDD) should not lead to data loss

• Toshiba Stor.E D10 on Satellite A660 PSAW3E esata connection

  Hello!!!

  A few days ago, I bought a 1.5 to Toshiba Stor.E D10 eSATA HARD drive.
  I tried to connect it via the eSATA cable. At first I saw my D10 HDD 1.5 in Win explore (Win 7 Home Premium x 64) as drive E.
  When I tried to access the drive, I get a "device not ready" error I was expecting 5 minutes with HARD drive connected externally. I got the same error. When you look in the Device Manager in the records section I couldn't see it. All I see is the internal 640 GB HARD drive.
  When I connect it via the USB 2.0 connection, the drive is recognized and working properly. I could transfer data to this subject with 23MBps max on USB 2.0 speed is 60MBps (480 Mbps).
  As I work with huge video files (~ 10 GB per hour of video) I need an eSATA connection to expedite the transfer.

  Plese help me with this problem!

  BIOS for Toshiba StorE D10 1.5 TB HARD drive PA3827E external?
  Sorry, mate, but I think that you misunderstood the thread.
  There are no BIOS for an external HARD drive. BIOS are available for computers only.

• Toshiba stor.e tv + WIFI settings does not

  Hello!

  I ve recently bought a Toshiba stor.e tv + and when you try to connect the drive to the router via wifi is just doesn´t work.

  I connect to my wifi network, I give the WPA password, I choose DHCP, and upon acceptance, it takes looong until what it returns to the screen first.
  So I ve noticed that when you select the network, under "Wireless Setup" mode, it says "on *: DHCP is not ready!

  All the world is facing something like this before?

  I ve connected the HD to the router via a cable network and it s fine.

  Thanks for your help!

  Hello

  I found an update of the firmware on the European driver Toshiba Stor.E TV page.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  choose: Options-> drive-> multimedia hard disks devices-> 3.5 StorE TV +.

  Now you should be able to download the latest firmware.
  After this attempt to set up the WiFi network once more!

• Toshiba Store E - TV + 1 TB hard drive remote is not working

  Dear members / Toshiba.

  My E - Tv Toshiba Store + 1 Suzette, Hard Drive Remote Control does not work. I asked the UAE UNITED for new remote Toshiba dealers and service centres. but they did not...
  Now I'm unable to use my hard drive without remote control, kindly give me a solution...

  Not quite how you help mate.
  I mean that if even the Toshiba authorized service provider can not control this remote control for Toshiba, I n t think any other retailer would be able to supply these parts.

  However, perhaps you could get a 2nd part of the hand. Check some portals online like Ebay for example.
  Maybe you will be favored by fortune