Similar Questions

• Satellite C50T - A - 11 d - touch screen does not work

  Searched - Microsoft and Toshiba drivers and find NOTHING - in fact in the box drivers from Device Manager - under Hid compatible touchscreen - I disabled and enabled it, tried to download the latest version of the driver - said this is the latest driver - but also said so there is no driver device associated with this device.

  Small keyboard will appear next to the system tray, but nothing on the touch screen works somehow

  Help please before I send this laptop pretty back!

  Hello

  > Sought - Microsoft and Toshiba drivers and find NOTHING - in fact in the box drivers from Device Manager - under touchscreen compatible Hid

  There is no such thing as a special driver for touchscreen and it's why you can't find this driver on the Toshiba driver page. Contains the Windows system and own internal driver to control the touch screen.

  Go to control panel-> Tablet PC settings control
  Here you will find some options to calibrate the touch screen

  In the view tab, you will find the setup button.
  Click the Setup button to launch the Setup where you could point to the touch screen
  In the substantive area called display display options you could calibrate the touch.

  In case this workaround would not be possible or would not work, I recommend you put the laptop back to factory settings using the recovery media or HARD drive recovery option.

  But beware: this recovery format the HARD drive and thus data backup would be recommended.

• Apple TV using a touch screen monitor

  I would like to use Apple TV 4 in class. However, I was wondering if for my setup, I got a huge TV touchscreen on the front of the classroom and a Apple TV connected to the touch screen, the touch feature would work with Apple TV 4?  For example, if I'm mirroring the screen of my iPad for the touch screen on the front of the classroom, could I tap on the touch screen to provoke things on my iPad (open an application or select the text, etc.)?

  N ° TvOS has no touch controls based as iOS. Remote Siri, Apple MFI remote controllers, remote app are currently the only way to navigate using the ATV.  In addition, AirPlay only broadcasts the display / audio - control would be always done through the iPad...

• ThinkPad 8 touch screen does not

  I used the windows built-in 8.1 touchscreen calibration tool and now the touch screen no longer works.

  I managed to get into the Setup of the tablet. He works the screen.

  It's so 'only' a Windows problem, but as I can not connect any more I can't reset Windows.

  Attach a keyboard via microUSB3.0 to USB3.0 does not work either, so I couldn't use F8.

  Could someone help me please!

  Micro USB 2.0 to USB 2.0 works

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• SX2210T-touch screen with two monitors feature

  Solution found by the user ES128 for touch dual monitor.
  I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

  Screen touch troubleshooting.
  * Disconnect the 2nd monitor of the PC. Restart the PC so that it only displays one monitor in Device Manager. Depending on your operating system, do the following: -.
  SX2210T Driver (Windows 7 only)
  SX2210T-Touch Application
  SX2210T-Touch Cam
  SX2210T facial recognition Application (no not necessary, only if you want)
  * Test the touch screen on the single monitor feature.

  I've just set up a configuration of dual monitor with a SX2210T and a ST2220T on Windows 7. I got the touch features work correctly on both. As a first step, affecting either translated the entry only on the primary (the one that has been in primary school at the time), but after playing around with the settings I got work like I wanted. I tried several things, but I think that the right thing to do is go in the settings of the Tablet PC from the Control Panel window and press the Setup button next to "configure your pen and touch poster» There you will be asked to each touch screen and you're done. 2-point multitouch works on each monitor, but not both simultaneously. At one point, I went that one would be regarded as primary, and which caused the hand on a single monitor to take account of the other and vice versa. Following the same steps above again not straightened it.

  I have the 2220 sort of setting before the 2210 so it seems I have a gigantic version of the laptop Acer Iconia with two screens.

• touch screen not responding do not in the iOS 10

  Hi all

  I use 6 and recently upgraded iPhone upgraded to iOS 10.

  I started having some strange behavior on my iPhone the day where I put on level to iOS 10.

  My iPhone touch screen is not responding properly. Sometimes I need to wait a minute for a touch of answer, and sometimes it does not. Sometimes, I need to extinguish it with force my phone.

  I never had a single problem with my iPhone 6 before and I think that it happened only after I upgraded to iOS 10.

  I tried to reset the phone and also the factory reset but no improvement.

  Any solution please.

  Thank you.

  Ratna

  Hello

  I'm having the same problem. The 'funny', it's that I have used the last two betas public iOs 10 and did not notice the problem, it seems to have started with the 10.0.1 release official. I tried version 10.1 beta, but the problem persists. Yesterday I went back to iOs 9.3.5, and the problem did not go so far.

  Best,

  Stefan

• touch screen unresponsive - occasionally

  touch screen unresponsive - occasionally

  iPhone 6 on June 23, 2016 reseller apple Local; I have a touch screen is unresponsive on my iphone 6. Sometimes, he will not respond to the touch (that is to say open an app, type messages or emails, etc, etc) is maintained with the supplier and not a necessary reset, but still problem continue and get the verse. I just wanted to know if anyone else was having this problem...

  Hello

  Follow the steps here, including Organisation of service if necessary:

  If the screen of your iPhone, iPad or iPod touch does not respond to the touch - Apple Support

• Apple Watch with broken touch screen

  Hello, community.

  I bought my 42 mm watch with stainless steel on January 4, 2016. And a few weeks ago I damaged it accidentally. Him came bracelet cancelled and the watch fell to the ground. Thus, the glass is broken. Touch screen works, but the broken glass is too high and can damage the fingers.
  On 7 September, Apple announced a new series of Apple Watch 2.

  Is it now possible to give them my watch, pay with a discount and make a NEW APPLE WATCH Apple Watch 2 series, or new sport? without a bracelet, that a case is necessary.

  Hello

  Apple does not currently offer a program of recovery for Apple Watch, whether in work or damaged condition.

  For compensation for your damaged watch, contact the Apple Support (mail service may be available) or make a booking Genius Bar to establish your available service options, the likely time and cost:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  Prices for the United States information service, for example, are available here:

  • https://support.Apple.com/watch/repair/service/pricing

• My touch screen does not work.

  My touch screen does not work. Sometimes, and other times I have to reboot. I restored my phone, but it still has the same problem. Any suggestions?

  The following information is taken from the HT201406 of the Apple KB article:

  If the screen of your iPhone, iPad or iPod touch does not respond to touch

  If your touch screen responds slowly, inconsistently, or not responding at all, follow these steps.

  Check your touch screen

  Make sure your hands are clean and dry, then try the following steps:

  1. If you have a case or a protective screen on your device, try removing it.
  2. Clean the screen with a soft, slightly damp, lint cloth.
  3. Unplug your unit.
  4. Restart your device. If you are unable to restart it, you can force restart your device.

  If your touch screen is still unresponsive as it should, contact the Support technique Apple or make your tablet in an Apple Store or Apple authorized service provider.

  Adjust your settings for tactile 3D

  If you have an iPhone 6s or later that does not properly respond to tactile 3D press, you can adjust the settings:

  1. Go to settings > general.
  2. Click Accessibility > Touch 3D.
  3. Then set the sensitivity of the setting.

  Get more help

  • Find out what to do if your screen does not turn.
  • If your screen is cracked or broken, implemented the repair service for your iPhone or iPad.

• iPhone 6plus iOS 9.3.5 since the last update my touch screen is freezing. Has yet to be decided. Connection to the computer did not help. I had to wait my battery died to restart. Once restarted I could use touchscreen but it now

  Aggravated with the update from my iPhone

  It is a list of the problems I have with my iPhone 6plus since updating to IOS 9.3.5.

  1. A single date after update my touch screen froze and I was unable to trouble or to use until the battery died and the phone has rebooted.
  2. Since this restart my touch screen hangs for 5 minutes at a time at least 5 times per hour.
  3. My screen goes completely black 20 seconds in the reading of an article. I have to refresh my browser at least 6 times by reading an article on the web.
  4. If I'm in iBook I can't read yet a page without the screen goes black. I hit the home back to iBook button try to keep reading where I left off the coast, but within 20-30 seconds it goes back to black.
  5. While I'm typing, even this message, I hit the button of the space and the words are charged or inserted which does not appear. I myself taking much time to type anything bc I have to go back and get rid of the words that the phone has decided to him only to change or insert.
  6. Improvements that never going to this last day f__d my phone. Difficulty what you did in the last updated bc I will eventually lead to an Apple Store and throw the phone home.

  What have I tried to fix it. Everything. For many in the list and you already know what the normal things are that the average person would be difficult it phone. I have no problems until I updated to iOS more recent so caused my problems of telephones you people. PLEASE FIX NOW

  Thank you

  Debbie

  I posted my severe issue with the iphone since the last update August 28, 2016 at 12:27 and watch to see when your system has declared that I posted my question that I call a problem so I guess you can add that to my problems too. OH nothing automatic record is

• my iphone 6 more screen sudeenly Gets a little blurry. touch screen does not

  Hello team,

  I bought the Iphone 6 more. that worked very well the last 6 months but suddenly I see that the LCD is completely blurred. touch screen works not. even when I am clicking on the home button or the sleep nothing works. After clicking the button sleep repeatedly the screen starts to work. It's really me trouble because I'm not able to receive the phone several times. Can someone help me if this is a known issue and what is the solution for this? just a heads up that there is no coincidence.

  Try a Reset: press and hold the sleep/wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears. -Note: no data will be lost

• Touch screen on the iPhone issues 5 after SW upgrade 9.3.2

  Hello

  I have an iPhone 5 that I bought just two years ago. The phone worked perfectly despite the fully loaded with applications, images and music. About two weeks ago, I upgraded the software to 9.3.2. Just after that, the touch screen started to work intermittently. When I managed to unlock, it will take seconds of use of the phone before that the touch screen no longer works again. I have to press the button several times until the touch screen comes back to life (only for a short period of time). It's totally unbearable. I can't yet answer phone
  calls.

  I contacted the technical support and all they got me to trying: restart the phone, restore it via iTunes for a backup, give it a new phone... and the problem is always the same. I've updated then 9.3.3 and same thing. I was informed by the technical support that this could be due to a problem with my hardware only made visible by a heavier operating system. Well, it's just not possible. It is not possible that my phone with applications 0 is unable to deal just with the operating system while running smoothly with the phone completely full before the upgrade.

  Someone faced the same question? If so, did you solve it? Thank you

  He Jeinser,

  Thanks for checking out the communities Support from Apple! I understand that you are having problems with the response of the touch screen on your iPhone. I can understand who want to ensure that you are able to use your iPhone, the way that you expect.

  You have already completed all the steps that I would normally recommend to solve a problem with your touchscreen, including restoring the iPhone and set up as a new device. From the information provided, it seems that your iPhone needs to be repaired. The following link should help you get started with the process and has links with additional information on topics such as the warranty and pricing of the service, replacing the battery and express alternative service.

  Repair - iPhone official Apple Support

  See you soon!

• Can I turn off the TOUCH screen feature?

  Here's my problem: my granddaughter for baby love watching YouTube nursery rhymes on my iPhone before the NAP. But sometimes it naturally touches the screen, which stops the video.

  Is there a way to disable the TOUCH screen of the iPhone function while keeping the video running?

  Thank you!!!

  Hi, Edward

  Yes - you can see that guided access (for example: "Ignore all keys") meets your needs:

  http://help.Apple.com/iPhone/9/#/iph7fad0d10

• My screen text flashes no buttons work and touch screen has no answer. Never seen that before?

  The screen of my text is STUCK in flicker. No buttons or touch screen responds so iPhone 6 more does not stop. Just continues flickering. If anyone has experienced this before? Thoughts?

  Hello johnnyappleseed59,

  Thank you for using communities of Apple Support.

  I understand that your iPhone screen is stuck and flickering and the touchscreen is unresponsive. I rely on my iPhone every day, so I know how much it is important that we get this problem is solved. I have a couple of things I want you to try.

  First, use restart your iPhone, iPad or iPod touch and try to force restart your iPhone, in particular, this section:

  How to force reboot

  You must force restart your iPhone, iPad or iPod touch as a last resort, and that if it does not. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  

  After that, I would closely monitor the situation and see if you continue to get the same flicker on your screen.

  I would also recommend trying to make a current backup of important data from your iPhone. This article will help you:

  The backup of your iPhone, iPad and iPod touch

  Best regards.