Tuner TV Qosmio E15 - AV101 does not work

Similar Questions

• Qosmio F20 - WiFi does not work

  I have a Qosmio F20 and recently wi - fi would not work att all or don't work only very rarely. Couple that with the fact that Norton Internet Security has recently kept maxing out the cpu then we disabled from running in the background.

  We tried to set up the network again, we took all the security on the router but Tosh will only see the network if it is directly connected to our router linksys with ethernet cable.

  I took the step of disabling the adapter wi - fi built-in and loading top/installation of the linksys phone adapter that we use for our other laptop HP (older). Even that kept dropping out, connecting for a few seconds at a time, but it was beautiful when he was back in the HP.

  Can someone help me on this one?

  Hello

  did you check if your router does not work properly? And make sure that tries to connect with another access point to verify if you really can't connect with your built-in wireless card.
  May I ask what type of router you have?

  An update of the firmware on the router is sometimes useful.
  Otherwise, try to reinstall all the wifi tricks related like drivers and software and try again, because wifi can be sometimes very tricky.

  Welcome them

• Qosmio G10: OS does not work properly (very slow)

  I have the same problem with the CPU. Pc slows down extremely, sometimes it's back to normal, but after a few seconds, it's like hell once again. I tried various OS (Win xp Home, Xp Pro and XP MCE) so far, but none of them does not solve the prob. I tried then to see if I can slow down the CPU manually, but that did not work, either. Kinda funny, because I had no probs virus, nothing.

  Actually I don't really know what I should do now.
  If there is anyone out there with the same problem, let me know, if all is well there is someone who has solved.
  Otherwise, I'll go with linux, maybe that's going to work.

  Anyway, please if anyone has good suggestions...

  Thanks in advance

  CU

  pistolpete

  Hello

  In my opinion, you should install OS using recovery media. The image content designed Toshiba all drivers necessary, and it should works well. It has been tested and there should not be any problem. If the antivirus application is installed it can slow down the BONE quickly (as in my case).

  Like I said, the recovery DVDs to use for the installation of the OS and enjoy life.

  Good bye

• Qosmio DX730 - screen does not work

  Hello

  my screen is not working. I see that the computer is fine as I can get it to Flash briefly in view when I change to AV input mode, but then the screen just blanks out. I tried to reboot several times, turning off completely, but nothing seems to work.

  Any idea on how to solve this problem?

  If your computer works correctly under the external screen, while the problem could be linked to the internal panel display maybe what it s faulty, I said maybe, because to find the fault, the equipment must be checked by a technician.

  However, from my point of few, it could be a problem of display panel, and this can be corrected by the replacement of parts.

• DVD-RAM on Qosmio G25 (AV513) does not work correctly

  Hi guys,.

  My G25 has crashed and I restored it using the original restore CD supplied with the machine, but after the installation of the DVD-ROM (Mat * a dvd - ram UJ-845 s) did not appear in the windows XP media center SP2 and in Device Manager.

  It appears with a yellow (!) I tried to install the driver on the site, but there are "device not connected".
  I tried the DVD via the Qosmio player and it worked does someone has an idea how make it work on windows again?

  Thank you

  Hey Buddy,

  have you tried to remove the drive from the "Device Manager" and reinstall completely? Normally windows should install then device and shouldn´t you need all the drivers, especially for the DVD-RAM.
  So, if it is not already done, remove it and try it.

  Greetings

• Qosmio F50 - Microphone does not work do not

  For some reason any my microphone no longer works.

  If I go in the Conrol Panel I can see on the Recording tab 'Microphone Realtek High Definition Audio works' but as I speak to you there is no forthcoming green bar. And it is not cut or something like that.

  Can someone suggest?

  Thank you

  Hello

  The internal MIC is part of the webcam.
  Then you should first check the webcam software. There is an option for microphone.
  Here, you can set the volume to maximum.
  In addition, you should try reinstalling the audio driver. Maybe this might help you.

  As mentioned by Timox; the internal mic should be set as default in Control Panel-> sound-> device tab for registration
  Usually the two microphone inputs must be visible; internal and external microphone.
  Intern must be verified.

  Good luck

• Qosmio F30 - remote does not work after recovery

  I replaced the HARD drive in my qosmio F30 and restore windows XP MCE from the DVD of restoration, but the remote doesn't work anymore under windows. However, it always works for the qosmio player. Help, please?

  Hey Kevin,

  You can download all drivers here if you have a European model:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Your model is a bit more if you need to find in * Archives *:
  * Archive * > Qosmio > Qosmio F Series > Qosmio F30

  Check this box!

• Qosmio F10 - Bluetooth does not work

  Can't get my Bluetooth to knitting - machine came with it already charge. My Palm found once but hangs when I try to transfer the data. Now can't find it. Get an error message when I try to change your preferences on my laptop is detectable and will not save the setting.
  Help!

  Hello, Janet

  I don't know, but all Qosmio F10 do not have Bluetooth. Can you please check it you can see a Bluetooth label in the lower corner of your laptop? It looks like this one http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm.

• Qosmio F30 keyboard does not work properly

  I moved to Linux (Kubuntu) and have such a problem: my button "arrow down" spam itself. :| I tried Debian and Knoppix, but the result was the same.

  I posted it in this section because I think it has bug hardware, not Linux.

  I was able to stop spam with another arrow key. But when I changed some keyboard settings (numeric keypad options), he began to "pressing" down to ifinitly. :( Working with my laptop is impossible /: E

  How can I fix this stupid bug?

  Hello

  have you already tried to connect an external keyboard to the machine to check if you have the same problem?

  Otherwise, I guess that it s a hardware problem. So if you still have warranty on your machine you should contact a service partner for a checkup of hardware on your system.

  BTW. Here´s a link to a index of ASP (authorized service partner) If you want to bring your machine to repair:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS

  Welcome them

• Internal TV tuner for the Qosmio G20 does not work

  I have a qosmio G20 and the built in TV does not work, I reinstalled the driver and the program windvr 5 but no response.
  Whenever I start the program, I can't use the installer.
  Please can someone help me?

  Hello

  Qosmio G20 was delivered with Windows MCE.
  You can also use the Media Center Microsoft watch TV on the laptop!

  Please check if the built-in TV tuner works with MCE. If so, there is nothing wrong with the tuner or the drivers!

  Best regards

• TV tuner does not work with SP1 Vista32 on Qosmio G30

  Hello

  My TV card does not work with Vista32 SP1. Material contol said all workers, but the Media Center Receiver service crashes immediately after departure.

  Did someone knows a solution?

  Your Ruediger

  Hello Ruediger

  I don't know if this will help, but try to remove and install the tuner of TV Toshiba - 2.0.0.61129 again. You can find it on the Toshiba support page.

• Qosmio G30-155: video Capture does not work using s-video in port

  Toshiba Qosmio G30-155 video capture does not work via the ports of the video (Windows Vista Ultimate x 86) victory of version 3.90 BIOS
  Video capture does not work in Windows Media Center, even if selected as ports of entry port composite or s-video in Windows Media Center settings.

  In the BIOS version 3.90 parameters via esc - F1 can only select this option: NTSC (USA), NTSC (Japan), PAL (S-video).

  It is worth noting that the laptop is supposed to be capture NTSC for composite input mode

  Someone turned to make this model of video capture for laptop, via composite video input with the new version of the BIOS (version 3.90 win)?

  Can you please explain what you want to do exactly?

  Many years ago I had this old Qosmio with TV tuner and antenna in port so I used it to transfer my old VHS format videos and burn movie DVDs.

  To this end, I didn't use Windows Media Center. Why you n t use other recording applications. I think that everyone is better than Windows Media Center.

• F20-137: TV Tuner does not work on MCE

  I just purchased a Qosmio F20-137 and when I set up the TV Tuner (DVB - T) I had no problem. However when I try to watch TV on Media Center he frequently stutters and loses its signal (about once every 2/3 minutes). I tried a couple of different antennas ready (DVB - T), but the problem persists.

  I thought it was due to the TNT being strong enough signal. However I recently bought a £45 Freecom (DVB - T) usb to my desktop and it rarely or never stutters or loses its signal. The USB device does not work on the Qosmio so that I couldn't try on that.

  Is that what this indicates that there may be a problem with my laptop? Or can anyone suggest a possible solution to the problem?

  Thank you

  [Edited by: admin November 26 05 08:32]

  Hello

  Well, it s a strange question.
  Have you tried to watch TV via Qosmio player?
  In my opinion, you should check if this problem occurs when the Qosmio player.
  Please check.

  Good bye

• Qosmio F10-101 does not have a TV tuner

  Hello

  I bought my F10 about 2 years ago. It is actually a F10-101. I picked the local official Toshiba site (Turkey). On the web page, he said that F10 comes with a TV Tuner (such as all the Qosmios). Also I checked it on the site of toshiba - Europe.com. The local page was actually just a copy/paste of the toshiba - Europe.com

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/JSP/SUPPORTSECTION/discontinuedProductPage.do?PRODUCT_ID=98310&DISC_M OD = 1 & service = EU

  2-3 days later, I bought the computer. Since I knew that the specifications, I didn't ask questions. When I got home, I realized that there was no TV Tuner on my machine, or remote control. I called the dealer that I bought, they said that none of the F10s have TV Tuners.

  I sent to the local distributor of Toshiba on the problem, why this is so. They do not even condescend to answer. The TV Tuner functionality is also excluded from the site 2-3 days later (I also sent Toshiba International, but I was told to contact your local Distributor).
  I didn't actually buy my Qosmio for its TV Tuner functionality. But this isn't what Qosmio is made for?

  I didn't have to return to the computer dealer, because it is a very good machine in addition to its multimedia capabilities. I say "was" because of some problems of motherboard, I am facing nowadays. I'm a little start to Brown it off.

  What would you do if the same thing has happened to you?

  Hello Cagri

  It is well known that you have time to 14 days for the product if you are not satisfied. I don't know how it works in your country, but here where I live I can bring it if I am not convinced. I will also say that after buying a new product each of us should check the product, and if something is not as described in the product description, we must respond as soon as possible and dealer.

  Qosmio F10 does not work for me because it's one of the first laptops Qosmio but one thing confuses me. According to the specifications of the laptop it comes with WXP Home. Am I wrong? As far as I know to use the TV tuner you need Media Center Edition.

  Sorry, but it's really not easy to be objective enough. After 2 years is now too late for all the complaints. I just hope that you still like your toy and I have a lot of fun with it.

  Good bye

• Qosmio DX730 and Win8 - touch screen does not work

  Hello

  My wife's parents bought a Toshiba Qosmio DX730 (model PQQ11A). They have recently upgraded to Windows 8 and the touch screen does not work now.

  The problem is lack of drivers (the monitor driver reports as a generic PnP monitor).

  I have went on the Toshiba site and selected downloads driver for the appropriate model and installed a number of drivers, including recommended NVidia display drivers. There is no drivers on the site that seem to install support for Toshiba touchscreen.

  Are there no drivers available for this model Windows 8? If not, is there another solution? If Yes, where can I find them. Any help very appreciated because they have nice and bought computer Windows 8 so they could use the touch functions.

  Thank you.

  Hello

  On the page of the Toshiba UE driver you can find drivers for Win 8.
  As far as I know that you will install the Toshiba display driver for the touch function works correctly.

  I found this driver.
  Please check if you can install this:
  [Win 8 TouchScreen software for Qosmio DX730 | http://eu.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 381 & selSeries = 366 & selProduct = 7338 & salt ShortMod = null & language = 13 & selOS = 40 & selType = all & rupload = Yes & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = all & selectedLanguage = 13 & type = all & page = 1 & ID = 83418 & O SID =-1 & driverLanguage = 42]