TV Home Media 3 not working not properly in windows 8

Similar Questions

• SIRIUS Internet Radio Media Player not working not properly because Windows update installed on my PC

  My Sirius internet Player multimedia radio is not working properly because Windows updates are installed on my pc. updates KB971486 KB974455 KB974571 KB975467 KB975517 KB974155 KB976525 KB974470.  Tested internet radio/media player for sirius on another computer and there is no problem.  Have tried all of the fixes recommended by sirius... This update of windows seems to the source of the problem.

  Does anyone have an idea with security update could be the cause of the problem?  Should I uninstall this?  If I find one that is causing the problem, how can I block it to move again?

  Thank you

  Hi Smwall,

  Welcome to the Microsoft Answers site!

  Do you have a particular error when you try to play?

  Method 1:

  You can try to start check and clean boot if the problem persists. Clean boot boot will help you know if all the background programs conflicted with the player. To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The steps to perform a clean boot are given below:

  1 log on to the computer using an account with administrator rights

  2. click on start, type msconfig.exe in the start search box and press ENTER to start the System Configuration utility.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue

  3. on the general tab, click Selective startup, and then clear the check box load startup items. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the skin all the Microsoft services check box, and then click Disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use with existing restore points system restore utility

  For more information about the clean boot, follow the below given link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the start search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click on restart

  Method 2:

  You can try to uninstall the updates one by one in the windows update window and check if the problem persists.

  To uninstall the updates from windows update:

  1. open installed updates by clicking the Start button.

  2. click on Control Panel.

  3. click on programs

  4. under programs and features, click view installed updates.

  5. click on the update that you want to remove, and then click Uninstall.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more details, visit the below given link:

  Remove an update

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

  Method 3:

  Alternatively, you can hide the update, which does not allow the player to play.

  Follow the below given steps:

  1. open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.

  2. do one of the following:

  ·         Click the link that tells you important updates are available if you have some updates to hide.

  ·         Click the link that tells you optional updates are available if you have optional updates to hide.

  3. Select an update that you want to hide, right-click, and then click hide update. Do this for each update you want to hide.

  4. click on OK.

  For more information about Windows Update troubleshooting visit the below given link:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with the capture tool works not properly on Windows 8.

  Can I change to automatically let me start to select without clicking on New?

  Original title: snipping tool - work when I start it up, the new button has already been clicked but not at home

  Clarification:

  At work, my computer is Windows 7. At home, it is Windows 8. At work when I start the capture tool I have not hit any other button in order to start the selection of the area I want to Snip. The tool is already gray and my mouse is ready to score my selection.

  At home when I start the capture tool, I get the menu, click on 'New' and THEN I can start my selection - one additional click. It annoys me (I know it's small, but I cut a lot) so I was hoping there was a setting I could change how it starts.

  I know that's not exactly a new topic, but I found that I had the same problem.  I found that the cause of this problem actually comes from OneNote believe it or not.  If you have recently updated your Office Suite and now have the ability of OneNote, all you have to do is to open OneNote and configure.  Once you get it configured you can then select the options that you just press the Windows key + S to be able to cut out a screen shot and you can also set it to copy directly to the Clipboard, then there is no need to tap the new button more in the cutting tool.  Hope this makes sense and helps anyone having the same problems I had.

• HP Envy 360, model 15-U363CL: Synaptics Clickpad setttings works does not properly in Windows 10

  Synaptics Clickpad v. 19.0.12.95 settings are not saved after Windows 10.  Every time I have stop and restart Win 10, I have to disable "TAPPING" I hate go in the settings of the mouse/clickpad.  Settings have been saved on close and worked well in Win 8.1.  HP needs to come with a new driver.   In the meantime, I guess I might have to go back to 8.1 win?

  Anyone else having this problem?

  Software and driver results for:

  HP ENVY x 360-15-u363cl (ENERGY STAR)

  Synaptics TouchPad Driver 18.1.7.52 Rev.A 188,0 MB 17 July 2015

  You must use Win 8.1 driver as driver Win 10 is not available for the touchpad.

• Monitor display is not properly in Windows XP sp3

  Original title: Windows xp sp3 does not properly

  Hello, I do not know if this issue belong to the material division of the forum. I have an old system who have windows xp sp3. It was working fine until week couple but after a few days when I switched it on the screen is not displayed correctly.

  All the colors randomly displays as a spot on the screen and the other letters in a sentence is missing. I tried in safe mode with just visible in debug mode, but it doesn't happen in the journal to the screen. I can not even reinstall windows xp. Now I'm not able to understand if it's the problem of the operating system or a malfunction of certain components of the computer. Please help me.

  Thanks in advance.

  Hello

  Method 1:

  I suggest you to start the computer using the VGA Mode.

  (a) restart the computer

  (b) press F8

  (c) in the start menu

  (d) choose the option

  (e) activate the VGA Mode

  This option starts Windows in mode 640 x 480 using the current video driver (not Vga.sys). This mode is useful if the display is configured to a setting that the monitor cannot display.

  Reference:

  To start the computer in safe mode

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  If you are able to start the computer using the VGA Mode, you can perform a system restore to the date where the computer worked well.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

  If you use system restore when the computer is in safe mode, you can't undo the restore operation. However, you can run System Restore again and choose a different restore point if any. You can also create Safe Mode system restore points. System Restore affects the Windows system files, programs and registry settings that have been changed recently. It can also make changes to scripts, files, batch and other types of executable files on your computer. System Restore does not affect personal files, such as e-mail, documents, or photos, so it cannot help you restore a deleted file.

  If the problem persists, you may need to contact the manufacturer of the monitor to the stand.

• Pavilion dv7-6b51ea graphics controller does not properly on Windows 8

  Hello

  Since I upgraded to Win7 for Win8 I all right, except that I can't play some games (for example Alan Wake). The graphics are ok on all the cutscenes, but in a kind of negative colors during the game.

  I already tried to uninstall and install the back card (not physically). Also, I tried to update the driver, that does not work either.

  Do you have someone had the same problem and was able to remedy?

  Thank you!

  Alan Wake was working properly in Windows 7?

  How the device has been upgraded to Windows 8?  Was it a new installation or an upgrade on the spot?

  It seems that the system can have switchable graphics with Intel and AMD.  Was this the driver you have installed?  You mentioned that it didn't work.  He did install the driver correctly and the problem persists or not installing driver fail?

• EMF Tiff image conversion does not properly on Windows 7 PC

  I have a c# application that monitors the Clipboard.  When an EMF
  comes, I extract the EMF of the Clipboard data and try to
  Save offshore in a TIFF image. Everything works fine on a windows XP PC. However, when you do the conversion to grayscale, the converted image is not readable (blurry) on Window 7 PC (32-bit / 64-bit).

  I have using the standard GDI + for the conversion needs. What could be changed as the origin of the problem? Any help appreciated.

  Hello
   
  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Visual c# in the MSDN forums. Please post your question in the Visual c# MSDN forum.
   
  http://social.msdn.Microsoft.com/forums/en/category/visualcsharp
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Windows media player not funziona ho windows 7 original

  Windows media player not funziona non riesco ad aprirlo ho windows 7 original vista, my non so come fare. Ho downloaded mesh e funziona tutto pero quando voglio although he player music mi dice che ha di funzionare then e windows attempts una soluzione. No ho risposta. VI want.

  Hello

  Please select your language from the drop-down menu above to post your question in the language of your choice. The forum in which you've posted is for English only. If you can't find your language above, support for additional international sites options are by following the link below:

  http://support.Microsoft.com/common/international.aspx

• Qosmio F50 - Fn keys not working not properly on Windows 7

  Hello.

  Install Dual Boot with
  * genuine Vista,
  * 7 RC1 64.

  All the drivers are OK on Seven 64 (some require to accept Vista compatibility mod to work properly - ALPS Touchpad, for example), except the Add Package value:
  * No Flash Cards.
  * Panel buttons work fine. Except the Dolby button which does not (beep, but nothing else).
  * Keys Fn work partially:
  Bq. -His volume, brightness and a few other basic functions (caps and numlock, etc.) are well recognized by seven. \\-Sound it / off, in sleep & sleep, switch video modes Panel/external, touchpad ON / OFF do not work.
  Tried the usual (VAP of uninstall, reboot and clean, restart and reinstall, then restart), but nothing more.
  I use the latest BIOS update available.

  When we look into msconfig, I saw only one executable file, HSON, islaunched at startup, but is never visible in the process list (even having chosen 'Show all processes users'). Is this normal (because it can launch services/DLLs then stop) or not? I tried all modes (XP SP2, XP SP3, Vista) compatibility and admin rights, but it is not yet launched (or self-closing)...

  No matter who with Vista 64 experienced the same problem? Or: matter with Vista 64 a all work keys Fn?
  Any idea?

  Thank you.

  Hello!

  The FN, flashcards, illuminating buttons and keys all these special function keys to the Toshiba value added Package.

  So it of a bit confusing, but you have a problem with Windows 7 or Vista x 64?

  I guess that the VAP does not work on Windows 7 because it s is not designed for this OS and there is no PPV still available for Windows 7, only for Vista.

  If you have some problems on Vista 64, I can recommend this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724𨝜
  The user Raver did publish an interesting solution and maybe this thread is also interesting for you.
  Check it!

  Good bye

• Midtown Madness and Midtown Madness 2 works not properly in Windows Vista

  Hello, I am a representative of the Customer Service posting on behalf of a client. The concerns of customers is as follows:

  The customer has Windows Vista Edition Home Premium. It has installed Midtown Madness and Midtown Madness 2 on that computer. The problem is that it does not work, there, this means that the game is not answer correctly, the winning scores record and do not unlock the next course or vehicles. He has mentioned a mistake, but he was not able to provide the exact wording of it. The error occurs only after a short while when he played two games. He is also the Director, so the solution in KB307091 does not apply.

  Hello

  1. have you it install the trial version?

  If it has installed the trial version of the game, whereas he would have all the options available for the game, for that you must install the full version.

  If it has installed the full version, then I suggest you to follow these steps and check if that helps:

  Method 1:

  Try to run the game as administrator and check if this can help, right click on the game icon and click on run as administrator.

  Method 2:

  Try to perform the clean boot, and then check to see if the same problem occurs:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 3:

  You can also download and install the update patch and see if it helps:

  http://www.Microsoft.com/games/Midtown2/default.aspx

  It will be useful.

• Oracle is ole2 (excel utility) works not properly on windows 8

  Hello

  The company where I work uses oracle forms 6i on Windows 8 and 7 to its users. They managed to set up properly to work well on these S.O., also they use OLE2 to generate Excel files... Everything works well but there are a few random issues when generating Excel files, it crashes sometimes, other times does not Excel, other times files it generates it well...

  I know the forms oracle is not supported to work with windows 7 and 8 and the company migrates, but it will take a while...

  Meanwhile, what solutions would you guys suggest? ... Perhaps a good solution might be decommissioning theses "OLE2 pilot" on windows 8 to those used in windows xp? How would you do that?...

  Thank you very much in advance!

  Here some examples of the code using OLE2:

  Here some examples of the code used:

  PROCEDURE NEW_EXCEL)

  PE_APPLICATION IN THE OLE2. OBJ_TYPE,

  PE_WORKBOOKS IN THE OLE2. OBJ_TYPE,

  PE_WORKBOOK IN THE OLE2. OBJ_TYPE,

  PE_WORKSHEETS IN THE OLE2. OBJ_TYPE

  )

  IS

  BEGIN

  PE_APPLICATION: = OLE2. CREATE_OBJ('EXCEL.) APPLICATION ");"

  PE_WORKBOOKS: = OLE2. GET_OBJ_PROPERTY (PE_APPLICATION, 'WORKBOOKS');

  PE_WORKBOOK: = OLE2. INVOKE_OBJ (PE_WORKBOOKS, 'ADD');

  PE_WORKSHEETS: = OLE2. GET_OBJ_PROPERTY (PE_APPLICATION, 'WORKSHEETS');

  END;

  --------------------------------------------------------------------------------------------------------------------------------

  PROCEDURE OPEN_EXCEL)

  PE_APPLICATION IN THE OLE2. OBJ_TYPE,

  PE_WORKBOOKS IN THE OLE2. OBJ_TYPE,

  PE_WORKBOOK IN THE OLE2. OBJ_TYPE,

  PE_WORKSHEETS IN THE OLE2. OBJ_TYPE,

  PE_NOMBRE_ARCHIVO IN VARCHAR2

  )

  IS

  BEGIN

  -INSTANCE APPLICATION EXCEL Y SE ALREADY VISIBLE.

  PE_APPLICATION: = OLE2. CREATE_OBJ('EXCEL.) APPLICATION ");"

  PE_WORKBOOKS: = OLE2. GET_OBJ_PROPERTY (PE_APPLICATION, 'WORKBOOKS');

  ARGS: = OLE2. CREATE_ARGLIST;

  OLE2. ADD_ARG (ARGS, PE_NOMBRE_ARCHIVO);

  PE_WORKBOOK: = OLE2. GET_OBJ_PROPERTY (PE_WORKBOOKS, 'OPEN', ARGS);

  OLE2. DESTROY_ARGLIST (ARGS);

  PE_WORKSHEETS: = OLE2. GET_OBJ_PROPERTY (PE_WORKBOOK, 'WORKSHEETS');

  END;

  Think about what you're trying to do... Oracle Forms 6i was introduced around 1998-1999 was compatible with the OLE used by forms and to Windows 95/98.  Can you really expect this version of Oracle Forms to work reliably with Windows 8?  Those are the kinds of things companies do generally not account for when they make upgrades.

  As for your comment,

  I'm not sure that the company could deploy Windows Xp Virtual Machine on so many computers of users...

  If your company uses MS technology to manage your desktops, it shouldn't be too hard to do out Windows XP MS Mode for your workstations.  It will be not - without pain.  It will be easy - don't.  Is this the perfect solution - don't.  It will give you improved stability until you upgrade - Yes.

  Craig...

• Transfer of records to memory stick using Windows Explorer works not properly. (Windows 7 64-bit)

  I use sticks of memory to copy my photos and documents from my computer for backups of these elements.

  I currently have about 8 000 photos that I try to copy computer to stick.

  The total size of the pictures is about 18 GB, and I use 32 GB sticks. I have four different sticks, from three different manufacturers, and the problem occurs on all four sticks.

  The photos are in "My pictures", who are then in albums, sous-albums, then sub-sub-albums, everything in "Images", which is located in "libraries."

  Reproduction, which has more than 12 hours, it looks like it works OK, but when I check the files on the memory stick a lot are missing!

  Some photos are missing from some albums, and many albums is not there at all.

  I did this for several years, but this problem just started. (It is about six weeks, since I've finally done it.)

  Can someone tell me what I am wrong dong?

  Not all USB keys are of equal quality.

  Personally I would use a portable hard drive.

  12 hours for 18 GB of data is excessive

  Assuming that a brand PC made the mistake of using win update for "Recommended updates" rather than just Important?

  A run/installed any new utility prior to the problem occurring?

• Client VPN works does not properly in windows 7

  I use the latest version of the VPN client in windows 7 for multiple users and each of them have problems, they connect apparently but when trying to access the network internal no navigation link is set up, someone has the same problem, nothing has been published in reclassification microsoft site this issue they claim, it should work perfectly but aparently not.

  Any help will be greatly appreciated

  We use VPN client v5.0.05.0290 without problem.  Here is a link I found initially when testing with Windows 7 and VPN client... maybe it will help you solve your problem.

  http://weblogs.ASP.NET/bhouse/archive/2009/01/15/how-to-successfully-install-Cisco-VPN-client-on-Windows-7.aspx

  I didn't have to resort to this procedure on windows 7 pro 32-bit.

  On a different note, can pass you the traffic to hosts on your internal network by IP address or hostname?  I found a problem using the AnyConnect client - only to not configure the connection profile to indicate to the client that connects to what our internal domain name was... then my clients have not been able to establish connections incoming withougt manually by adding the domain name until the end of the hostname... shot in the dark...

  Good luck!!

• Microsoft 3500 mouse not working not properly on Windows 7 and Windows 8.1

  Original title: Microsoft 3500 mouse

  Hello!

  I just bought a Microsoft 3500 mouse and I've met some problems.
  I tried to use it on two different computers (a currently running Windows 7 and another one running Windows 8.1) and I get the same result. I plug the receiver, turn the unit on and the green light appears. It stays like this for no more than 2 seconds and it fades. The mouse continues to work as for a minute another and she doesn't move off the coast (not going into the energy saving mode since the blue light goes out and the pointer freezes) so I have to turn on/off the unit.

  What can be the problem? May be a driver problem or it's just defective?

  Hello

  To answer the question, it could be. As you have tried on two different computers, it seems to be a problem with the hardware which indicates a defective hardware. However, you can also test whether it is a problem with the software by following the steps below.

  Try installing the latest drivers for the Microsoft 3500 mouse from the link provided below.

  http://www.Microsoft.com/hardware/en-CA/p/wireless-mobile-mouse-3500#support

  If you download and install the latest drivers does not solve the problem, you can try the troubleshooting provided in the link below steps.

  Troubleshoot a wireless mouse that does not correctly

  Do we know the results so that we can help you further.

  Thank you.

• Wiping hard drive, lost Dell Home Media, can not watch DVD

  I paid a computer tech to fix my laptop froze.   He said I had bad sectors on the hard disk.  He my data backed up and deleted from my hard drive.  It has recharged my data but my Inspiron 6400 came with a disc of reloading.  Instead, there was a picture of a disk of reloading giving a Web site to go to if things had to be reloaded.  I gave this address to him, but now wonder if he used it or not.  I can't figure out how to get Dell Media without paying for it.  I loaded the Windows Media Player 11 and InterActual player and I can't watch the DVD of one or the other.  I think that I don't have correct display drivers?  If anyone can help with this, I would really appreciate it.  All I want to do is watch DVD - nothing complicated!

  Thank you