Unidesk and VMware View

Similar Questions

• Can the ESXI 5.0 and Vmware View coexist on the same server blade

  Hi team, sorry for the basic question, but can I install the ESXI and Vmware View on the same server?

  Kind regards

  Ismail

  VMware view installs inside a server operating system and he can definitley be installed inside a server running on top of vSphere.

• Level of encryption between Wyse ThinOS and VMware View desktop

  Can someone help me determine the level of encryption between my Wyse thin clients and virtual desktops.

  I use the latest Wyse ThinOS and VMware View connection Server 4.0.

  I have a manual desktop pool configured with things THAT RDP disabled. I'm also using smart card authentication.

  With direct disabled RDP is a configuration of SSL tunnel for the connection to the server and the RDP session to the virtual desktop by tunnel through this SSL connection?

  Yes that's right, although strictly that you should say server/connection security as if you use a security server, then this is endpoint of the tunnel rather than the CS.

• DST and vmware view = weird questions

  This is the 3rd time that when the time comes or goes we get questions of kind of weird in our very frequent floating pools, VMs stuck in starting up, wait for connection etc.

  If you look at the log below you will see that the virtual machine has been one hour before, and then she came back at the right time.

  Anyone else seen elsewhere?

  2014 03-18 T 16: 06:36.553 - 04:00 INFO (016 C-0390) < Service main Thread > [wsnm_desktop] DesktopManager queue server is installed

  2014 03-18 T 16: 06:36.585 - 04:00 INFO 016c - 082 C < logloaded > [MessageFrameWork] "ws_filesystem - component of VMware View filesystem plugin" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.595 - 04:00 INFO (016 C-0830) < logloaded > [MessageFrameWork] Plugin 'wsnm_jmsbridge - VMware View framework JMS Bridge Controller' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.612 - 04:00 INFO (016 C-0838) < logloaded > [MessageFrameWork] 'ws_klog - plugin VMware View Kernel Log' Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0390) < Service main Thread > [wsnm] System Service VMware View begins

  2014 03-18 T 16: 06:36.642 - 04:00 INFO (016c-0840) < logloaded > [MessageFrameWork] "ws_perfmon - VMware View Performance Monitor and counter shop" Plugin loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0850) < logloaded > [MessageFrameWork] Plugin ' ws_vhub - Service USB virtual VMware View framework "support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.643 - 04:00 INFO (016 C-0848) < logloaded > [MessageFrameWork] Plugin "ws_thinappmgmt - support for VMware View infrastructure Application Management" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:36.644 - 04:00 INFO (016 C-0854) < PluginInitThread > [ws_vhub] vhublib: initialized, VMware View virtual USB Hub API (64-bit) version: 5.5.0 build-966253, exit: unknown

  2014 03-18 T 16: 06:36.782 - 04:00 INFO (C 088-0890) < 2192 > program [MessageFrameWork] 'wsnm_jms - VMware View framework JMS bridge' began, version = 5.2.0 build-987719, pid = 0x88C, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 16: 06:36.806 - 04:00 INFO (C 088-0890) < main Thread > [] classpath option:-Djava.class.path=C:\Program VMware View\Agent\lib\; C:\Program View\Agent\lib\\agentjms.jar VMware; C:\Program View\Agent\lib\\commonutils.jar VMware; C:\Program View\Agent\lib\\events-client.jar VMware; C:\Program View\Agent\lib\\events-common.jar VMware; C:\Program View\Agent\lib\\gnu-crypto-2.0.1-1.jar VMware; C:\Program View\Agent\lib\\jdom-1.0.jar VMware; C:\Program View\Agent\lib\\jms-9.2.1.jar VMware; C:\Program View\Agent\lib\\jmswrapper.jar VMware; C:\Program View\Agent\lib\\log4j-1.2.14.jar VMware; C:\Program View\Agent\lib\\messagesecurity.jar VMware; C:\Program View\Agent\lib\\orchestratorj.jar VMware; C:\Program View\Agent\lib\\securitymanager.jar VMware; C:\Program View\Agent\lib\\sessionclientapi.jar VMware; C:\Program View\Agent\lib\\swiftmq-9.2.1.jar VMware; C:\Program View\Agent\lib\\v4v-msgserver.jar VMware; C:\Program View\Agent\lib\\winauth.jar VMware; C:\Program View\Agent\lib\\ws_appender.jar VMware; C:\Program View\Agent\lib\\ws_properties.jar VMware; C:\Program View\Agent\lib\\xercesImpl-2.9.1.jar VMware;

  2014 03-18 T 16: 06:36.818 - 04:00 INFO (088 C-08E4) < logloaded > [MessageFrameWork] "ws_javaview - VMware View Java Diagnostics Framework" Plugin, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.001 - 04:00 INFO (C 088-0938) < logloaded > [MessageFrameWork] Plugin "ws_java_bridgeDLL - VMware View Java Bridge Framework" loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.002 - 04:00 INFO (C 088-0934) < logloaded > [MessageFrameWork] Plugin ' ws_java_native - Framework Java native Support of VMware View "load, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [ws_java_bridgeDLL] JavaBridge installed service EventLoggerService

  2014 03-18 T 16: 06:37.208 - 04:00 INFO (C 088-0890) < main Thread > [] JavaBridge queue server is installed

  2014 03-18 T 16: 06:37.209 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer agent has completed the customization

  2014 03-18 T 16: 06:37.737 - 04:00 INFO (0624-0628) < 1576 > [VMwareView-RdeServer] program "VMwareView-RdeServer - VMware View RDE 32-bit Server" began, version = e.x.p build-1190491, pid = 0 x 624, buildtype = release, usethread = 0, closeafterwrite = 0

  2014 03-18 T 16: 06:39.567 - 04:00 INFO (C 088-0890) < main Thread > [] View Composer personalization state 0 (0 seconds)

  2014 03-18 T 16: 06:39.673 - 04:00 INFO (C 088-0890) < main Thread > [java] bridge exe started ok.

  2014 03-18 T 15: 38:45.288 - 04:00 INFO (016 C-0128) < main Thread > [wsnm_desktop] Session created in WAIT state: id = 1, winStation = Console

  2014 03-18 T 15: 38:45.350 - 04:00 INFO (0488-0978) < 2424 > [MessageFrameWork] 'wssm - VMware View framework Session Manager' program began, version = 5.2.0 build-987719, pid = 0 x 488, buildtype = release, usethread = 1, closeafterwrite = 0

  2014 03-18 T 15: 38:45.397 - 04:00 INFO (0488-0550) < logloaded > [MessageFrameWork] Plugin 'wssm_desktop - VMware View framework Office Manager Instance' loaded, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.397 - 04:00 (0488-07 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_winauth - taken in charge of VMware View infrastructure Windows Authentication", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.475 - 04:00 (0488-05 D 0) INFO for < logloaded > [MessageFrameWork] Plugin 'ws_thinappmgmt - taken in charge of VMware View infrastructure Application Management", version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488-0978) < main Thread > [wssm] Session Manager has begun for the session 1

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 to 28) < logloaded > [MessageFrameWork] 'wssm_uimanager - VMware View Host UI Framework' Plugin support, version = 5.2.0 build-987719, buildtype = output

  2014 03-18 T 15: 38:45.631 - 04:00 INFO (0488 - 0 B 40) < logloaded > [MessageFrameWork] Plugin 'wssm_ui - VMware View UI framework' loaded, version = 5.2.0 build-987719, buildtype = output

  I was on the phone with VMware for 5 hours Tuesday last with this same problem.  I ended up solving the problem without their help.  You must initialize your model, let the time updated, shut it down, take a new snapshot and recompose your pool.

  Re: View 5.3 - desktop blocked at startup

• NAT and VMware View

  I am

  try again using VMware View, where a person uses a VPN to

  connect to my view of the Park, but my connection to the server is running NAT, and

  the client tries to connect in my Park he cannot get the virtual

  machine. Are there restrictions? Any tips?

  If you have found this information useful, please consider awarding points to 'Correct' or 'Useful'*.

  Exactly THAT PCOIP do not work on the Security server.  If your using VPN and connect to a broker internal conection it should work good as new NAT could shake things.    Should be a simple test however.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12

• Wyse V10L with WTS 6.3 and VMware View show

  Hi, just got the WTS 6.3 Wyse today and upgraded a V10L. Then entered the IP of our server VMware View, that meets our OK thin client device and presents us with a nice box of connection of VMware. I then enter my login details and I get the error "No. SUPPORT TUNNEL '...

  I can plug directly into the virtual machine in question using RDP in Wyse client, so assume its something to do with the SSL through the broker. Disabled the requirement for SSL and changed my broker on the device of Wyse http://x.x.x.x, (instead of https)-same error.

  Has anyone else seen elsewhere, or have any idea what is the problem?

  Hello

  Open the view administrator, select your display server, click on edit and activate (direct connection on the desktop)

  This is because the customer of Wyse ThinOS with does not have components of tunneling.

  You will need the option direct conect. The thin client connects to the Server View, authenticated, get its information session and after which connects via RDP directly on the desktop.

  Thank you

  Christoph

• VMware View customers logout - log for debugging PCoIP shows "sessionDisconnectTimer: set the timer to 2147480 seconds.

  I have operators who are still on my desktop 24/7/365.  Assuming that there are no other problems, they get kicked out of their sessions from view after about 24 days.  We use Thin Clients HP running ThinOS and VMware View Client.  When I check the log for debugging on the Windows 7 VM, I see that when the connection is established, he wrote the following line:

  2014-09-09 08:44:30, 807 DEBUG < MessageFrameWorkDispatch > [wsnm_desktop] sessionDisconnectTimer: set the timer to 2147480 seconds

  After the expiration of the time limit, I get the following messages in the same newspaper and the client disconnects:

  2014-09-09 08:30:08, 571 DEBUG < TimerService > [wsnm_desktop] sessionDisconnectTimer: triggered timer, session is disconnected.

  2014-09-09 08:30:08, 571 DEBUG < TimerService > [wsnm_desktop] session::SessionDisconnectTimedOut: Disconnect message posted on the desktop

  Where it becomes this timer of?  The global setting on the display server is maxed at 9 999 999 minutes.

  The host is EXSi 5.0.0

  VMware View Server is 5.0.0 - 481677

  See Agent 5.0.1

  Operating system is Windows 7 Pro running on the virtual version 7 machine

  It is a known problem that has been fixed in 5.3.2 view - the global time-out in minutes is converted to a time in milliseconds, which then overflows a 32-bit counter. See Overview of VMware View Release Notes

  A desktop session is timeout and be disconnected after about 24 days, 20 hours and 31 minutes, even if the Session time-out setting has been set to a higher value.

  Mike

• Native integration with VMware View

  I'm evaluating the access (without client) browser based virtual destops with Ericom AccessNow for VMware View software.

  Please find diagram of connection planned for use in the attached file.

  Does anyone has tried to do already?

  What is the best practice to integrate native and VMware View?

  Where can I find the rules of firewall used in the integration of product?

  Are there security issues with access by browser-based virtual desktops?

  Thank you much in advance.

  In general, we do not see a lot of native discussion here, so maybe this isn't the best place for this post.   You can try this http://communities.vmware.com/people/AdamG53 guy has sent a private message because he used to work for the natives.   I have not seen him active lately, so I don't know if it meets or not.

• VMware View is over-equipped?

  Hello!

  Having a small company of VMware View seems MUCH too complicated and overengineered. Can this be true?

  I mean that the alternative is a pWindows machine to connect to a machine vWindows with mstsc.exe. I know it is not completely the same, but it is also very long path between a solution that works out-of-the-box and VMware View with much installation of the client OS, directory servers, see security, view connection server, server transfer from view, the slim viewers, tool view composer and General everything that is necessary to get this working.

  And then it only works for Windows desktop computers. Using something like the console in vSphere client redirection is able to display all the OS' are - even Android!

  (Ok! Forcing my employees to use for their daily work vSphere client would proberbly many resignations ;-)) but I is possible!

  Am I missing something here? I mean VMware-view-evaluators - Guide.pdf is 152 pages (!) - long 'mstsc.exe remoteserver' is just... a line?

  Is there a simple solution for this. It's like building a spaceship to get a Coke to the nearest 7-11. It's 'just' a shutoff Holy crap! :-)

  Best regards

  -Green Morten Hermansen

  Don't forget when you are dealing with 10-50 VM that is not for to be honest.

  You see a company of 10 or 20 depending on what lines you have you can find a service provider where they can provide you with da (computer desktop as a Service) and which would reduce as much cost

  I did a small deployment without costly storage and costly servers and the system worked well.

  Then give the user a Zero-Client and boom!

• Two monitors configured using PCoIP does not cover both monitors for VMware View

  Occasionally, I've experienced the symptoms described in KB1027899, when usually the first time of connection for the day that I select multiscreen and the screen is divided in the Middle the 2 monitors using PCoIP. I end up disconnecting and reconnecting to the virtual machine a few times, which is a valid solution, but I'm still curious about why this is happening.

  I am running VMware View 5.0.0 build-481677, on a Wyse R90L with Windows XP Embedded, I use VMware View Client 5.0.0 build 481677 and VMWare View agent on a box of Windows 7 5.0.0 build 481677. We lack vCenter and ESXi 5.0.0 in all areas as well.

  According to the article, this happens because there is not enough video memory configured for the virtual computer. The problem I have is that if I force the pool offices use PCoIP and 128 MB of video memory, I can't RDP to the workstation as the Protocol is locked, I need to still be able to do. I tried manually increase the memory video, but view reconfigures to match the settings of the pool.

  Is there a way to increase the video memory without changing the required logon Protocol? Or is there a fix in a different way to this question?

  Thanks a lot guys.

  Joe

  Have you tried to change the configuration video pool to be 2 monitors with 2560 x # instead of the default resolution to see if that solves the problem?

  Datto

• Samsung NC-240 - Windows 7 with VMware View connection problem

  Hi all

  My Samsung NC-240 is set to connect to my server VMware View Connection Manager. I can connect to one of my Windows XP via PCoIP or RDP virtual desktop very well, but I can't connect to my virtual Windows 7 desktop. Whenever I try to connect, it will be wrong and tell them "Session Lost!"

  Research in the NC-240 event log, I see the following:

  11 d, 00:01:09.260 > ready to connect to the host

  11 d, 00:01:21.990 > connection to the host (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.020 > using resolution 1920 x 1080 at 60 Hz on DVI port 0

  11 d, 00:01:22.150 > CONNECTED (10.3.70.110, 00-00-00-00-00-00)

  11 d, 00:01:22.160 > receiving power state updated: S0

  11 d, 00:01:22.960 > CURRENT SESSION

  11 d, 00:01:23.600 > (MGMT_RDP): invalid capability length (20)

  11 d, 00:01:23.600 > connection down (RDP protocol error detected)

  11 d, 00:01:23.680 > lost Session!

  11 d, 00:01:23.680 > (MGMT_RDP): INIT: received unknown event 0 x 20!

  Here is the information of the current version of my NC-240:

  Part number of the firmware: FW010034

  Hardware version:

  Firmware Version: 3.0

  Firmware Build ID: v250

  Firmware version Date: December 7, 2009 15:55:15

  PCoIP processor revision: 1.0

  Bootloader Version: 2.1

  Bootloader version identifier: v163

  Bootloader Build Date: August 28, 2008 16:56:13

  Here is the information of the current version of my Agent and VMware View VCM:

  VMware View 4.0.0 - 210939

  I appreciate any input.

  Thank you

  Sang A

  I think it's the same than P20 then try wyse page

• VMware VI3, VMware View with Novell eDirectory integration

  Hello

  We are a COMPUTER consulting company and we have a lot of colleges and universities using Novell looking at VMware VI3 and VMware VIew.

  (1) for VMware VI3 tabs of permissions must be able to connect to an LDAP server to Active Directory only.

  (2) for VMware VIew 3, the VMware Agent should be integrated into the Novell Client for Windows...

  We did a little proof of concept with VMware View, and each time that the Novell Client are causing a lot of problems with VMware View Agent. It's bad because these 2 projects has been more than 10000 thin clients. They decided to Citrix XenDesktop used instead.

  It'll be great if you can built your product with the architecture of Novell.

  Best regards

  Eric Champagne

  IT Director

  Adaris Technologies / www.adaris.ca

  Yes, it would be nice

  a question: you say that a decision was made to use XenDesktop: are you still using VMware VI3? or XenServer?

  Jose

• VMware VIew 6 (PCOIP): Windows Client and web browser connects, Android and Ubuntu - don't

  Hello colleagues!

  VMware Horizon Client 3.4.0 build-2769709

  VMware View 6.1.1 construction-2769403

  VMware vSphere 6.0.0 2776511

  That's what's wrong: used SecurityServer and connecting to the server. External connection - via a router. When it is connected to a vmware PCOIP Protocol (Internet) outside of the view with a Windows client and a web browser, it works fine. But when connecting from Android or Linux (Ubuntu 14) load the desktop does not occur. Android immediately displays the message 'connection to server lost', Ubuntu delivers all messages - I'll be back on the screen to select a pool table.

  Which connection via MS RDP connection protocol is correctly to all customers.

  In the settings ConnectionServer in PCOIP Security Gateway set up the external address of the router.

  Redirect them router ports:

  -TCP 80,443,8443,4172,32111

  -UDP 4172,32111

  Any ideas?

  In security settings server in 'URL of PCOIP' was FQDN, but it must be the IP address.

• Disable the protocols and encryption algorithms in VMware View connection server and security

  Hello

  In my recent deployment, I had a customer request to disable some protocols and encryption at the Server VMware View connection and security. I read some articles and found that this has been achieved by editing the locked.properties file. But when we have edited and replaced the file, users could not connect to the virtual desktop, so came back to us backwards and desktop computers worked fine.

  I found a few articles that we don't need to edit the locked.properties file in VMware view Horizon 6. If someone has done this please guide me through. Here are the details of the protocols and encryption algorithms that should be disabled

  Diffie-Hellman key

  Enable SSL v2/V3 and TLS 1.1 and 1.2

  Disable the RC4 encryption algorithm

  Select the secret of transfer (if possible)

  
  

  VMware view 6 is the connection to the server and security server.
  

  
  

  Thank you.
  

  Hello

  I implemented the following steps (from the manual):

  1. update the JCE policy files to take in charge the high-strength Cipher Suites

  You can add some cipher suites of high resistance for greater assurance, but first you must update the local_policy.jar and US_export_policy.jar files to each server instance and the security strategy for JRE 7 see connection to the server. You update these policy files by downloading the files to extend JCE (Java Cryptography) unlimited strength political jurisdiction from the Oracle Java SE download site 7.

  If you include some high-strength cipher suites in the list and you do not replace the policy files, you cannot restart the VMware view Horizon connection to the Server service.

  Policy files are located in the directory C:\Program View\Server\jre\lib\security from VMware.

  For more information on the download of the JCE unlimited strength jurisdiction policy 7 files, see the Oracle Java SE download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html.

  After you update the policy files, you need to create backups of the files. If you upgrade the instance of the view connection server or security server, any changes you have made to these files can be replaced, and you may need to restore the backup files.

  2. the changes that policies of global acceptance with ADSI Edit

  • Start the ADSI utility on your computer see connection to the server.
  • In the console tree, select Connect to
  • In the selection or type a unique name text box or a naming context, type the unique name
    DC, DC = vdi is vmware, DC = int.
  • In the type or select a text field or the server box, select or type localhost: 389 or the name of a fully qualified domain (FQDN) of the server computer to connect to port 389 followed view.

  For example: localhost: 389 or mycomputer.mydomain.com:389

  • Expand the tree of the ADSI Editor, OU = properties, select OU = Global, then select OU = common in the right pane.
  • On the object CN = common, Global = UO, UO = properties, select each attribute that you want to change and enter the new list of security protocols or cipher suites.
    I used the following settings:

  EAP-ServerSSLCipherSuites: \LIST:TLS_RSA_WITH_AES_128_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA,TLS_RSA_WITH_AES_256_CBC_SHA256

  EAP-ServerSSLSecureProtocols_ \LIST:TLSv1.1,TLSv1.2

  It is not the highest possible, but they work with all the features of our customers.

  • Restart the service of VMware view Horizon connection server (server connection and security).

  This is not Activate secret transfer (if possible) , but other points are covered.

  If anyone can give a tip to activate the transfer secret, I would be grateful.

• Problems with the module supplier of personalized identification information and overview of VMware View Client working together

  I have a Horizon of VMware View client that connects me HVD Windows 7. So when I give view client Vmware Horizon my credentials, it auto logs me. I also created a custom credential provider that works on Windows 7 PC. When I install the custom in the HVD credentials provider, it works if I am already connected to HVD and I simulate CTRL + ALT + DELETE. Can I use my credential provider to "unlock" in. However, if I disconnect of HVD and try to connect using VMware Horizon View client to connect to Windows 7 of HVD, it gets stuck on the screen of the tile. I see the VMware SSO user tile but nothing happens when I click it. Then, I use my provider of customized credentials to connect. I expect to bypass my ISP credentials on the first connection and self as before.

  Anyone have any ideas?

  Thanks for your help.

  OK, I did some more troubleshooting and discovered that it was a problem with auto connection set to TRUE on my side of custom credentials provider (I pbAutoLogonWithDefault to TRUE). Since I still like it TRUE, I had originally set it to FALSE and then change for REAL once my credential provider was used.

  Thank you!