updatation sequence file

Similar Questions

• Automatically update the sequence files (any)

  We have a very large number of sequence files that must be updated.  The "Types" have changed.

  Is it possible that TestStand (f1 2010) updated all the files in a directory, or if all goes well recursively?

  What I am used to doing is to check all the files off our Version control, select about 20 files simultaneously and open them in TestStand, save all, and then close them, then make another game...

  Is there a faster way?  (I expect to archive them out of Version control.)

  Mike

  Take a look at the converter file sequence located in tools > sequence of update files

• I'm writing a VI that updates a file whenever it is running, but on a new day a new file is created that is updated up to what a new day begins.

  I wrote a VI to create and update a file as many times as necessary on any given day. Any other day, a new file is created which, from that day there will be updated every time that the VI is executed and so on. The problem is that when I run time VI, the first of a new day, that is to say when the file is created only data are written to the file and not the header data. When the file is added, the data header and regular data is successfully written to the file. Can someone tell me how to fix this? A copy of the VI that I wrote is attached.

  Thank you

  Chuck M.

  You had written header information when it was not an existing file, and then you overwrote this file with another file consisting only of data because you wired the "add to the file? (new file:F)' the same for the two functions (F requires to create a new file).  I put the write function header in a structure of business because you only want to run when it comes to a new file (otherwise it will overwrite what's there).  Wire the straight path through the case of forgery.  I plugged a REAL data entry function to always add (because there's always a file at the time wherever the program there).

  

  Jim

  PS - a few other comments

  • Avoid structures of the sequence
  • You don't need the property node
  • Use the features of path (no chain)

• How to change the location where the scan of the computer updates the file?

  I would like to know how to change the location where the scan updates the file.

  HI ROT2,.

  It depends what printer and the software you use?

  Normally, you will find a 'save to file Option save' like the screenshot below.

  

• I get on Firefox... I get 'Update XML file incorrect (200)' I've tried everything. How do I get Firefox to return?

  I now get "Update XML file incorrect (200)" when all I'm trying to update my Firefox. I can't to this topic. I tried everything I know.

  You are already using version Firefox 3.6.x (3.6.15), there are currently no updates available.

  See:

  • AUS update XML Malformed 200 file

• Massage of error: Update XML file Malformed 200.

  After downloading fire 3.4.16, I received a massage of error: Update XML File malformed 200.
  I can only do this issue using Windows Internet Explorer.
  So my logic says it's software from Firefox and not my machine. But what?
  Yours sincerely
  Derek

  There are a few possible causes of this error, see https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200

• How to let axSequenceView view the sequence file, after the opening before the race.

  

  How to let axSequenceView view the sequence file, after the opening before the race.

  I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.

  You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.

• Get a context of a file of sequence another sequence file

  Hello

  My goal is to create my own property loader. I have successfully created a LabVIEW VI wich ables me to select a category of variables (local variables, parameters, fileglobals, stationglobals) with the expression editing control, and he created an INI file with all my variable names and values.

  OK, now I wanted to created a custom tool of it. So when I create a new sequence Teststand, I can select tool-> LoadMyVariables and creates a current of my movie file INI file (let's call it the WORK SEQUENCE FILE).

  To create this tool, I put my LabVIEW VI in another Teststand sequence file (let's call it the FILE TOOL of SEQUENCE). what I call in my custom tool.

  The problem is that my LabVIEW VI "ThisContext" (the sequence context) need input and when I use my my WORK SEQUENCE FILE tool: it runs the TOOL SEQUENCE FILE and I can not access the my WORK SEQUENCE FILE ThisContext more.

  My question is: Y at - it a way to send "ThisContext" from a sequence in a sequencefile to a sequence in another sequence file? (using the custom tool Teststand)

  To help people in the situation, has the solution:
  -> To find the sequence in which it is called the tool, use the search string: "RunState.InitialSelection.SelectedSequence [0].

  -> In the words of change in this case, connect to its properties: the frame AND the engine!

  See the image as an attachment.

• Name programmatically change a sequence in a sequence file

  Hi, I was wondering if there is a way to programmatically change the name of (rename) a sequence in a sequence file. Thanks in advance!

  You should be able to by this method: (assuming that the sequence you want to edit in the same file)

  ThisContext.SequenceFile.GetSequenceByName (Parameters.OldName). Name = Parameters.NewName

  It does not validate it works correctly but. You really need to check the new name does not already exist, and that the name is valid (only contain letters, numbers, and underscores. Name cannot contain spaces, begin with a digit or be empty. In addition, the name of t may not be 'Value')

• The list of all the steps in a sequence file

  Hi guys,.

  I'm new on the forum of NI Teststand, so this my first topic here. The situation is the following:

  Currently I develop a LV operator interface and I need to have a list of all the test step in a sequence file.

  I am able to list all the steps of a sequence, but in the file of the entire sequence.

  Are there opportunities to do?

  Thanks in advance!

  Hi Maroci,

  first of all, I am also quite new to TestStand, but I still think I can help you a bit.

  Given that your code works for a sequence in the file simply browse all the sequences in the SequenceFile. Consider something like this:

  This help you?
  Edit: Don forgt not (like me) to close the SequenceFile reference!

• Launch by programming a sequence file don't switch for execution in the user interface

  TestStand 4.2

  LabVIEW 2009

  Windows Vista Business 32-bit

  My movie file uses a SequenceFileLoad reminder to start his own execution automatically by using the entry point TestUUTs. This is accomplished by calling the Engine.NewExecution method. The problem I have is that my custom LabVIEW user interface does not switch to the view of execution when execution begins. If I manually start the execution using the TestUUTs key, the point of view of execution is displayed.

  In my interface user, changing the display of the sequence at the sight of the execution is done in the event callback, DisplayExecution, and the StartExecution event reminder. I also tried the ExecutionChanged event reminder, but realized that it did not apply in this case. The complex UI that comes with TestStand works correctly and, as far as I know, I use the same event reminders to manage change in my user interface.

  Any ideas? What Miss me?

  Thank you

  Toby

  CLD, CTD

  I realized what was going on. I was to switch it on the SequenceView using the ExecutionClosed callback, but was not checking the number of executions that have been opened. Opening my file of sequence autolaunching would open two executions, one to open the file and the actual execution of the file. As soon as the file has been opened, the first run was closing my UI to return to the display of the trigger sequence. Execution else had already begun the execution of the sequence file so he would continue to run in view of the execution, but I didn't see it.

  I now use ApplicationManager.Executions.Count and only to switch back to the SequenceView if it was not open execution.

• Engine.ReleaseSequenceFileEx (): modified sequence file handle is not released

  Hello

  Hello all

  I am facing a problem of leaking memory, basically, motor TestStand cache is not cleared. I have a file of main sequence calling a .NET dll. The dll has functions to remove the steps in the sequence "DestinationSequence" in "TXTModify.seq" and insert a new step in the same sequence after that. The operation is performed without flaw and I see that my "Modify.seq" TXT"file has been changed.

  After the transactions are made I am free the "TXTModify.seq" movie file handle by calling Engine.ReleaseSequenceFileEx () on the file of the modified sequence. But as soon as I close my TestStand sequence editor I get WARNING Debug (debug warning screenshot is attached). This waring should not seem like I already deleted my file handle of sequence of the TS engine cache by calling Engine.ReleaseSequenceFileEx ().

  Please help me get rid of this warning. Your generous help or suggestion will be appreciated.

  Thanks in advance.

  Concerning

  VDC

  PS: C# .NET source project so all the necessary sequence file are attached. You must keep the file in the sequence to a specific location (create the folder structure)

  Location of TXTModify.seq: \Source_Code\MemoryLeak_SupportFiles\TXTModify.seq d:\Core_ATE_application\Test_Executive_domain (TED)

  Location of HTMLModify.seq: \Source_Code\MemoryLeak_SupportFiles\HTMLModify.seq d:\Core_ATE_application\Test_Executive_domain (TED)

  VCC,

  VDC wrote:
  [...] After the sequence of closing TS editor I don't have memory leak problem, but I see that my sequence files are not changed. I'm completely subscript sequncefile has been changed. I have cross checked to see if I had the correct sequence file path, and path found was valid. [...]

  I'm enjoying what the leak memory has disappeared which is new good infact. On the other hand, I understand that your sequence is not changed. How do you check on that?

  You don't save any changes made to the file. If this is desired?

  You can check the behavior in a simple test:

  Create a new sequence file in the sequence editor, and then save it. Open (in parallel) for example, by default c#-User Interface installed with TestStand editor mode. Load the sequence file it.

  Now, it must be open in the sequence editor as well as in the user interface. In the user interface, add a new step of the action in the sequence. Please note the in the user interface, the file of the sequence is marked with a *-symbol which means there are unsaved changes. Switch to the sequence editor. You will see no change in the sequence.

  Switch to the user interface. Save the file in the sequence. The *-symbol will disappear.

  If you switch to the editor of sequence once again, you get will announce, that the movie file has been changed by an external process. You can now load changes in the sequence editor.

  Question: Is that what you see?

  hope this helps,

  Norbert

• Sequence file unload the runtime starts and remains in memory through executions reference

  Hello!

  I am facing a problem using a dynamic movie file loading.

  Here's how my request: I'm testing the products on two sockets of different test so I use (a measure) parallel processModel.

  When lauching a test on one or another location of test, I still have the same trial customer template (MyProcessModelClient) in which I wrote a PreUUT call as usual. In this PreUUT custom, I get the serial number of a product, and according to this number I am a sequence of test script file and saving it (TestSequence_1.seq if it's on the test Socket 1) and TestSequence_2.seq if it is on the other.

  Then, in the MainSequence of 'MyProcessModelClient', I have a single sequence call TestSequence_1/2.seq dynamically according to the socket (TestSocket.MyIndex + 1). This calling sequence is then defined with:

  • option to load: dynamically load
  • unloading option: unload after executing the step

  And here's the trouble!

  First, the code stored in my "SequenceFileUnload" of TestSequence_x sequence reminder runs when the file is loaded... (I guess this one is loaded, copied in memory and unloaded right after...)

  Then what PreUUT reading for the next product on the same sockets of test generates an error in my script code tries to save the new file TestSequence_x (error-17206: '... a file of sequence with this path is already loaded "")!

  No idea why he acts like that?

  I don't know why you see the behavior that you describe and I'm unable to reproduce with a simple example (that I have attached). A few comments/suggestions:

  1. Make sure that you call Engine.ReleaseSequenceFileEx after that you create and save the movie file in PreUUT.
  2. The unloading of movie file callback will be called when you release the sequence file after you save it in the PreUUT because you release the last reference to this file in sequence.
  3. Make sure that you set the OptimizeNonReentrantCalls false on the sequence that you call in the TestSequence_x.seq.

  -Erik

• Programmatically add a reminder of the sequence in a sequence file

  How to add sequence recalls programmatically to a main sequence?  For example, to configure, I get a table that tells me as the sequence files to run for each test instance.  I want to call these files in sequence as a reminder of the sequence on the main sequence.  I don't want to use the flow regulator because there are a large number of sequences for this ATE, and the test list may develop in the future.

  Thank you

  Shari Chen

  Symmetricom

  Thank you after the publication of themsg, I found sequence generator tool, and it was exactly what I was looking for!

  Thank you again...

• read the test sequence sequence file properties

  Hello

  I use the older version of TestStand 2.1. I have the ability to sequence (Sequence File Properties) version than incrimante each backup. I wanted to know if I can get in the sequence, a variable that indicates the version of the current program.

  Thanks in advance

  If I understand your question, use ActiveX steps to access the PropertyObjectFile.Version property or use the hidden property: RunState.SequenceFile.Data.Version. Hidden properties are subject to change in future versions of TestStand, however, is more future proof to use API. However, this property has never changed so far.

  Hope this helps,

  -Doug