Update 9.3 grime fingerprints ID

Similar Questions

• I forgot the password of Windows 7 and need to find out before I update my drivers of fingerprint - HELP!

  I recently changed my DV7 Windows 7 password and now I can't remember it.

  I can log on as the fingerprint app knows the password and am currently using this laptop.

  Over the past two days, the fingerprint app stopped working on some of my many time log on to websites and I would like to correct this... but, given that the only way that I can open a Windows session is my mark, I'm afraid to do anything until I can change or remove my windows password.

  I do not have a 'change password' disk and when I just tried to make one, of course he asked me my current password. I already guessed at my usual passwords but not luck... so maybe when I reset my password I hit the wrong key or my key caps or maybe even changed my PW to something that I normally do not use anywhere elsewhere.

  I am terrified that the fingerprints app will cease to operate at the windows log on and I will be watered.

  Is there a way to determine or even reset my password windows 7 without knowing? Is there somewhere in the application of the fingerprint where can I find the current Win7 PW?

  Thanks for the help!

  John M.

  Hello

  The connection via the software of fingerprint sensor validation do you happen to have administrator privileges?

  When you connect, go to the--> user accounts Control Panel.

  In user accounts are trying to create a new account and give administrator privileges.

  Erico-

• Pavilion dv6: fingerprint reader not working after update to Windows 10

  Hello

  Recently, after the update to Windows 10 fingerprint reader works just on my Pavilion dv6. I tried other methods I found on the forum, and I'm looking for a driver get the fingerprinter reader to work. I tried to download HP SimplePass (which has been removed from my PC by updating the operating system) in the hope he would get my fingerprint reader to work, but no luck.  I also looked in the settings (in Device Manager) for biomeric devices, and I found a driver with an exclamation point, indicating it wouldn't work. So, right now, I need a solution to get my to work on a fingerprint reader.

  Thank you

  Nathalie

  Hello @Nikil1503,

  I don't know that if you follow exactly the documents there will be no problems. It will be a good learning experience!

  After the return to let me and the community to know how it goes.

  You're welcome, have a great day!

• X201T Fingerprint software to do not login after update

  I recently updated my software of fingerprints, and until then I could connect to windows7 with a blow of fnger.

  After the software update to version 5.9.4 I cannot connect using the fingerprint reader, the light shows green for a confirmed hit, but does not connect.

  (1) I've deleted and reinstalled the software erases all data saved password

  (2) I re-recorded fingerprinted again

  (3) check the parameters check box to enable the dial-up connection

  anyone else having this problem?

  Control Panel-> hardware and audio->-> change the parameters of biometric devices

  or

  Type "modify the biometric parameters" in the start menu

  There is an option to allow users in the domain to connect using fingerprints.  Note that this is a Windows strategy and has nothing to with the Lenovo fingerprint software.  The previous version of the software FP worked because he (erroneously) ignored this policy.

• Utility of fingerprinting Toshiba - "Failed to connect to the sensor.

  Having a problem with the Toshiba fingerprint utility. The program works fine until I try to use any sort of firewall/antivirus program, even the built-in Windows Firewall: S the scanner still works fine for the boot time scanning, as well as for windows logonm but as soon as any kind of firewall/antivurus software loads up, it fails to connect on the sensor. I added the program to the lists allow but still nothing... So far I tried with AVG Internet Security, Outpost Security Suite and by default, the Windows Firewall. Windows Firewall turned on for awhile, I got when I bought the laptop and there was no problem.

  It's a Qosmio X 500 - 00 X, it uses the same installation of windows when I bought...

  See you soon!

  Hello

  Please update the software of fingerprint. You can find it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Also try a different firewall and AntiVirus. I have good experiences with AntiVir and Kaspersky Security Suite.

• Satellite A300 - stopped to ask fingerprint logon

  Hello

  I have a Toshiba A300 with Windows Vista on what I bought late last year.
  Everything worked very well and in order until 2 months ago, when he stopped suddenly to ask fingerprint logon.

  I don't really know what caused it to stop working. Could someone help please?

  Try to update the software of fingerprints. I think that her place at v2.5.29 (Authentec).

  Also have a look in the settings of Authentec fingerprint, make sure that blow on Windows logon is enabled.

• Portege R500 - I lose settings in the fingerprint software

  Hello

  I use the fingerprint software, but sometimes, I lost my settings and database password and user fingers are clear. I have to import a few tweaks and then works fine. I lost my settings for 2 or 3 times in the week!

  You have an idea? Thank you

  Have you tried updating the software of fingerprint?
  To my knowledge, there is a newer version available
  See European driver of Toshiba and download and update software.

  One question; Do you use cleaning software? I mean software that remove the temporally files, form entries
  This software could clean up and delete entries from your

• Re: Tecra A10 Fingerprint reader works only with IE 8

  I had different user names and passwords stored on several Web sites.
  IE7, I could use the fingerprint reader to enter the user name and passwords for those sites.

  Because Windows update installed IE8, the fingerprint system does not work in internet explore - it works normally for all other programs and logon.

  I figured out it must be something security in IE8, but cannot work out how to re - activate the fingerprint software in IE8.

  Hello

  This question has been posted sever times here in the forum and it related to the question of the compatibility between the old handler access to fingerprint Truesuite, IE8 and Firefox 3
  As far as I know the most recent Truesuite access manager software v3.0 or higher should solve this problem.
  But we have to wait until this update will be published!

  See you soon

• Fingerprint software does not recognize my fingerprints

  Hello

  I installed the 64-bit Windows 7 (using cd upgrade upgrade to win7 program)
  Installed all updates (windows)

  However, fingerprint software does not recognize my fingerprints-. -.
  The first two are fine, but the third party never works, it's the same story for all my fingers...

  I HAD the program works perfectly until I reinstalled my OS
  For some reason, I remember the same problem last time I had to reinstall, do not remember what I did to remedy

  any advice?
  Thank you for your time and help!

  Edit:

  To add a few details:
  It worked before
  The hardware is not the issue (he reads my fingers)
  It is software or just my DNA changes my fingerprints-. -.
  I can't remember which version of the software / I downloaded the last time, but I find the latest software online on this site and found

  In addition, the FACE program does not work either
  He was working before I reinstalled the operating system
  Is it just me or all the security programs like simply not me-. -.

  Hello

  In your case, I recommend you remove all traces of fingers first.
  Then, uninstall the software and clean the registry with CCleaner.
  Then download the new software for fingerprint for the computer laptop and Win 7
  After that, scan and configure the fingerprints once more.

  In regards to the face recognition software;
  You must uninstall this too and need to download the latest version of this software for Win 7

  Good luck

• HP 6730 b - update of results of the last week to atservice.exe put CPU @ 100%

  HP health check recommended to update the drivers of fingerprint digital authentic tec last week that I made.

  Now the flat atservice.exe lines 1 CPU at 100% and the fingerprint reader does not work.

  How can I tell what version I am running and how do I uninstall and install the old version?

  I solved it by going into Device Manager and do back the personal driver (under identification devices)

• Often fingerprint reader stops working after laptop wakes from sleep (Pavilion dv6)

  I am convinced that the fingerprint reader is fine. There must be a problem with the driver may, something inconsistent with a recent update of the Windows 7 software?

  The scenario:

  • Laptop works very well.  I put on standby when I'm done and use the mousepad to wake him up.  LED fingerprint reader blinks, and I can drag my finger to log on.
  • At one point, after a few times to put the laptop to sleep and wake, the fingerprint reader does not.  No flashing.  I slide my finger and the player does not respond at all - is not yet tell me that there was a bad reading.
  • If I login and log back in again, no change. However, if I do a reboot, everything is fine - the fingerprint reader works again.

  I watched over and over again for new drivers and installed.  Nothing seems to affect this scenario.   Unfortunately, this has started to happen about 9 months ago () and because of the sporadic nature of it, I was not attentive enough to know the 'precise' point in time when it started happening.  My instincts tell me that there was some sort of update software/driver along the way which is originally the fingerprint reader not do not work right.  I hope HP continues a relationship with these companies to fingerprint reader and can transmit these questions so that we can do a software update.  But... I don't know if it has been abandoned.  My laptop is still under warranty, but it would be ridiculous to send in just this problem.

  I hope that someone has heard of this on the dv6 and may know a solution.  Thank you!

  My system is a HP dv6-6145dx.  I am running Windows 7, with the latest updates.  The integrated fingerprint reader works on HP Simple pass 2011 v5.1 and Validity Sensor driver 4.3.205.0 version.  When I try to launch the Simple passage interface, it loads the database, but then the application disappears.  I tried to uninstall and reinstall the software, but makes no difference with the issue, I noted.

  "If you keep an open mind, life will give you more opportunities."

  No problem, I am completely I shouldn't bother with Pass Simple version 8.  I advanced and installed version 6.  I did not yet get no joy, so I did a little more digging and found one more late Validity Sensor driver, version 4.3.304 (not noted in the list of update driver for my laptop model).  IT WORKED.  I can now go into hibernation and the fingerprint reader remains functional when the system is out of hibernation.  Previously, it was pretty much guaranteed became disabled.  So... it looks that my problem is now solved.

  

• R52 software Fingerprint problem

  Hello

  The other day I updated my laptop using the system update, but now my fingerprint software does not work properly.

  When I go to theThinkVantage of fingerprints for software and click on register or modify fingerprints, I get the error:

  An internal error has occurred (rpnpipe: rpnpipe: No. - svr (00000000fusserver))

  When I click OK, the box closes and nothing happens.

  Also when I start my computer, the fingerprint login screen appears but does not let connect me using only past of fingerprint authentication.

  Is it possible to recover my old version of software or to solve this problem?

  Kind regards

  Sam Rudge

  Well, I fell right on the same problem today with my laptop T43p. fact some research about the 'Levono support Page' and it turns out as the "SYSTEM UPDATE" ThinkVantage has a problem in its matrix, which is pointing on fingerprints 5.8 Release (funny thing is: I don't think that the software is ready for release). Levono so yah. I tried to say IBM does not sell it to Levono.

  Solution:

  1. Delete "ThinkVantage Fingerprint 5.8.xxxx" software from your computer using Control Panel - Add/Remove programs. (May need to restart your Windows XP, don't know whether or not you should)
  2. Get and download the latest version of the ThinkVantage Fingerprint Software (mine was 5.6.2.xxx) published the Levono Support Web site for your computer model portable & type.
  3. Install the .exe that you just downloaded.
  4. Restart your windows.
  5. Fact...

  I hope that things are going well for you!

  -Thien

• Portege is stuck with fan at full speed

  Sometimes even a few times a day.
  There were theories blaming the docking station.

  Once upon a time, an update firmware for the fingerprint, which was supposed to remedy.
  Well, after 4 years of suffering, losing the files, without solution of Toshiba...

  I got it.

  U N I N S T A L L T E M P R O.

  No more problems don't like that, even using the docking station.

  Toshiba's fault!

  Eli

  Well, the problem happens again, once in two weeks, instead of two times every hour.
  I found a way to reproduce the problem in 20 minutes: a 16 GB SD card full format,.
  Once I uninstalled "Toshiba PC Health Monitor", I could format the work of 2 hours.

  Good luck.

• Portege M800 CssSvr.exe error on the output of the mode standby

  Hi all

  I have a problem with CssSvr.exe (which as I google it is linked to the TrueSuite Access Manager software for reading fingerprints). Whenever the computer goes mode sleep after the recovery, there is and error associated with this program.

  I run windows Vista SP2. And the problem started after updating the software of fingerprint to the latest available version of (TrueSuite Access Manager 2.5.29.0)

  No known workaround for this problem?

  Thanks for the help!

  Post edited by: ln_1

  Hello

  I recommend reinstall this software again.
  If this is not enough, then you must disable it in Device Manager for fingerprints to save energy.
  Device Manager-> device fingerprinting-> properties

  Restart the unit.

  Good luck

• Tecra S11 - 11 H - stop with the fan turns

  Tecra S11 - 11 H stops - seems ok, but when the screen is off, after 3 seconds, CPU-fan begins to operate.
  Pressing the power button / stop a few seconds turns off the machine and shut the fan.

  Support put me to upgrade to the latest version of the prints digital-device driver, but I found the software, no drivers.

  They also told me to upgrade the bios to the latest version.

  Problem is that this update of the bios will not start. He complains about power cord power supply not connected or battery power is low.
  The two isn't true - power cord is plugged in and the battery is fully charged.

  What could I do?

  TIA

  LGKF

  Hi lgkf,.

  Yes, I think the support from Toshiba is just because I found this article on the Toshiba page:
  http://APS2.toshiba-tro.de/KB0/TSB0C032L0000R01.htm

  As you can see, update the fingerprint software can help you get rid of this problem, then you must update the software of fingerprint. The pilot is a part of the software, then download the package for fingerprints on the Web from Toshiba site.

  Uninstall the older version, reboot and install the downloaded version.

  Check this box!