Upgrade to Vista Ultimate

Similar Questions

• Satellite A200 - 1 GB: after upgrade to Vista Ultimate-> issues

  Hello

  I upgraded my Vista ultimate laptop, but I found a lot of problem:
  1 - the Fn + F1, F2,... no longer work.
  2 - get a blue screen,

  So I tried to do a clean install of vista ultimate, but I had no more problems!
  for example:
  "When you try to install the utilities equipment & password, I get a message" incorrect series.

  The media player shortcut key do not work
  If I install the toshiba value-added, the Fn + f1, f2... no longer work.
  In addition, no bluetouth software, no card Flash, no test available in the diag...
  and also, the BLUE SCREEN.

  I don't know if anyone can help me and thak you

  Baker

  Hello

  already made an update of the BIOS? It would be useful, maybe it s just because the BIOS does not correctly handle the Ultimate. What drivers did you download?

  It s a bit tricky, but I think that if you reinstall, and then put the drivers on it, it should work. Don't forget: Vista Ultimate needs a lot of resources and a bunch of useless stuff that can cause the machine does not properly.

  Welcome them

• Satellite P205-S6257: Chicony USB Webcam does not work after upgrade to Vista Ultimate

  I've upgraded to Vista Ultimate Home and now my Webcam does not work. When I tried to update the driver, I get a message that says that Windows has encountered a problem installing the software driver for your device...

  The installation file forthis training device is missing a necessary entry. Maybe it's because the file INF was written for Windows 95 or later. Contact your hardware vendor.

  I succumbed to find the drivers on the Chicony website. My laptop is a Satellite P205-S6257 and the Toshiba is not yet display on their support site. I don't have a disk for webcam.

  Any suggestions?

  I wish more users would use the advanced search for the Toshiba forum because many topics have already been discussed here and the solution was already planned.

  Check this box:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

  or this thread
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24868&MessageID=91172

  In the thread above, you will find a link to this page in the solution:

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/FAQ.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

  I hope I could help

• I have windows vista Home premium. How upgrade to Vista Ultimate in India?

  Windows vista Ultimate.

  I have windows vista Home premium. How upgrade to Vista Ultimate in India?

  Are you talking about changing the language of Hindi?  If the language you want does not appear in the optional updates in Windows Updates, then you can buy a copy of Windows in the language you want and reinstall Windows.  You can not upgrade.  You will need to do a clean install.

• I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can not find partition for temporary files

  I upgraded from vista ultimate to windows 7 64 - error message 0 x 80070490 windows can't find partition for temporary files - I have a lot of space and created a partition of 1 GB

  Hello

  Thanks for the reply.

  I suggest you to follow a few troubleshooting steps more and check if this helps you fix the problem on your computer.

  Method:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Hope this information helps you.

• upgrade from vista ultimate to win 7 ultimate

  I bought an alienware with win vista Ultimate edition system, the hard drive is 1 terabite, I installed an ssd with 164 GB I want to use as a single disc to boot with win 7 ultimate (I bought an upgrade), it is possible to do?

  Help, please

  Thank you

  Yes, it is possible.

  You can also follow this:

  http://www.Petri.co.il/upgrading-Windows-Vista-Ultimate-to-Windows-7-ultimate.htm

• Upgrade to Vista Ultimate does not

  Hello

  I had a vista Home premium pc upgrade to vista Ultimate edition (32-bit) without years number 1 or 2.

  Last week, I had a pc crash and had to reset the PC with the factory settings.  Of course, windows update asked a lot of updates and now I have vista Home premium sp2. But when I want to use the anytime upgrade vista ultimate SP1 dvd, it tells me that the option is no longer possible.

  is it because I already have SP2? Should I go back to SP1 to enable the upgrade option?

  Or am I forced to buy windows 7 ultimate upgrade for an ultimate version?

  It would be really unfair. Once, I bought vista ultimate version, I should be able to have a way to upgrade to vista Ultimate edition, without having to switch to windows 7 just top get the vista ultimate features.

  Thanks for letting me know my options.

  Regis.

  Uninstall SP2.

  Read the General info on your problem:

  On your installed operating system Service Pack level cannot be greater than what is on the disk to upgrade.

  Click Start > right click on computer > properties > system > it will tell you which SP you have installed.

  http://support.Microsoft.com/kb/948537

  "How to uninstall Windows Vista service packs"

  If the OS installed Service Pack 2 and Service Pack 1 upgrade disk > uninstall SP2 installed operating system > install the upgrade > reinstall SP2.

  See you soon.

  Mick Murphy - Microsoft partner

• corrupted files run sfc/scannow, but findstr cannot find details or file on windows 7pro sp.1 upgraded from vista ultimate

  corrupted files run sfc/scannow but findstr cannot find details or file on windows 7pro sp.1 upgraded from vista ultimate cd rw Dvd Player also stopped working cannot download Mr fixit on internet explore 11.

  A possible answer to your dilemma related to the results of the SFC is on this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/SFC-cannot-fix-corrupted-files-in-Windows-7/f798f377-126C-47ff-Bb16-ef5e0dddb5be

• Dell Inspiron 1721 Win 7 ultimate upgrade on Vista ultimate. ATI Raid driver problems.

  I install Win 7 Ultimate on Windows Vista Ultimate Edition for my sister.  Although I am appalled by his duty to pay 200 more of the money it has paid to buy Vista Ultimate (for which she won Bitlocker and the possibility to join the areas, I have the following problem: she has a lot to gain a little and there are still problems in the installation of the OS.)  It would be good, at least, since it paid the price to have copies of the disks him were sent and more download (which I work with)

  I am trying to install the upgrade from 32-bit to Windows 7 on my laptop Dell Inspiron 1721 and I get an error that says I need to update my ATI AHCI Compatible RAID Driver. I went into the device drivers update as described in the instructions and tried to update the driver but it says I have the latest version of the driver for it. So I tried to restart my laptop and represented the upgrade installation and received the same error message.

  Can you advise me on how to solve the problem.  She has spent a lot of money and, at least, deserves to make it work!

  Hello

  You should check with the system manufacturer (Dell) and AMD/ATI possible as they write drivers.

  Dell support & drivers
  http://support.Dell.com/

  Dell forums
  http://en.community.Dell.com/forums/
  AMD/ATI - Support and drivers
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• Error message when upgrading to Vista Ultimate SP1 to SP2 on HP d5000t__ desktop computer

  System: HP d5000t with 6 GB of memory; 408 GB of free space on the hard drive; w2408H 24 "monitor running Vista Ultimate SP1.

  Attempted to update to Windows Vista Ultimate 64 bit - SP2.  This failed repeatedly with the message in the last 3 months:
  Some updates have not been installed.
  Failed: 1 update
  Error(*s) found:
  Code FF Windows Update encountered an unknown error.  Get help with this error
  1 result for "WindowsUpdate_000000FF" "WindowsUpdate_dt000"

  http://support.Microsoft.com/default.aspx/KB/948465/en-us

  Information about Service Pack 2 for Windows Vista and Windows Server 2008

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Installation to upgrade Windows Vista Ultimate Service Desk on a pc Home Premium

  The bad news is, my sweet 3 year old 32-bit HP laptop (under home Premium), is dead, disastrously, this morning, after which a critical backup has not... my head turns... The GOOD news is that now I have the ability to clean install my new "Windows Vista Ultimate SERVICE DESK Upgrade"... Unfortunately... I can't understand... It won't let me "ipgrade" even on a restored factory pc... I counted "clean install", but am completely confused by the options window (& or not I'm sure using this software...) I checked before I bought & used to say that it works very well on this laptop...) ... In any case, I get the window & the following choices: * "Disk 0 Partition #1 (C) - Total size 221,1 GB, free Go 186,3 > & > * '0 Partition 2 HP Recovery Disk' - Total Size 11.8 GB, free space 1.4 GB / / / I do not understand the partitions or anything on this operation & need instructions...» I KNOW that this software is SUPPOSED to work properly... & of course, I don't want to go without it... NEXT disaster, I need the ULTIMATE cigarette back... / / / is there someone who understood? I can't draw conclusions, or analyze what all the... Thanks in advance for any help...

  Hello

  you do the upgrades within an operating system running and enabled

  Reinstall Home premium and then upgrade to ultimate

  and do NOT touch or modify this HP Recovery partition

  who is there to put your computer to how you bought it if necessary

  you press F11 on startup to start the process of recovery from him and then follow the prompts

• upgrade to VISTA Ultimate after installation of the Home Basic

  I had a hard drive crash and when I did the clean install I use the recovery disc for Vista EDITION family Basic.  I now have the recovery disc for VISTA Ultimate. The TWO sets of disks are OEM Lenovo/IBM ThinkPad 32 bit system. It is a long shot. Is it possible to upgrade to Ultimate without losing all my installed programs and data? In addition, Lenovo has no clue! Thankx in advance. Phil

  Hello

  recovery disks normally do a clean install, wipe the hard drive clean during the process

  you need a system of operating vista runing to do an upgrade that will not make a recovery disk

  and recovery disks are related to the particular brand and model number

  they are not interchangeable

• Upgraded to Vista Ultimate to XP Home now get dll missing ha1

  I upgraded from XP Home to Vista Ultimate. I did all the updates for XP Home before to move to Windows Vista Ultimate Edition and then did all the updates for Vista, now when I try to boot my system in place, its registrant I'm missing or damaged dll ha1 file. Any help would be greatly appreciated.

  Found a simple solution that works. Here is the link http://www.vistax64.com/tutorials/68767-clean-install-upgrade-vista.html

• Fingerprint reader HP HDX16 and two other drivers not detected after an upgrade to Vista Ultimate.

  Hello.

  Recently, I upgraded my HP Windows Vista Home Edition of Windows Vista Ultimate Edition HDX16 model (quite a 'new installation' upgrade.) Since then I've been doing a handful of drivers went unnoticed in the Device Manager. Keep in mind that the unpacking, all devices in the computer worked as it should.

  I downloaded all the drivers on the site of HP drivers, and these drivers are not detected. This led me to the relization that I might have to do a destructive reinstall of my OS, back to Vista Home edition. This would make Vista Ultimate completely a waste. Very restless indeed. I contacted a representitve HP, and he identified my problem: drivers preinstalled on the computer are adapted to the Windows Vista Home delivered pre-installed on my computer. However, he could not help me solve the problem.

  As a last resort, I tried a program called Driver Genius for backing up the computer a friend (who purched the same exact model, with Vista Ultimate pre installed,) drivers. This corrected a lot of the unknown devices, but I'm still left with three unknowns. I'm quite positive that one is the fingerprint reader. He refuses to be detected on start-up, and what is installing digital persona personal.

  Here is the run down on the three unknowns:

  1.

  Manufacturer: unknown

  Location: On bridge PCI standard ISA

  2.

  Manufacturer: unknown

  Location: On the Microsoft ACPI-complaints system

  3.

  Manufacturer: unknown

  Location: Port_ #0001.Hub_ #0005

  I tried to install DigitalPersona.

  I tried to reinstall Digital Persona.

  I tried to repair Digital Persona.

  I tried to perform a clean installation of Digital Persona (uninstall, reboot, reinstall).

  I tried to reinstall Windows Vista Ultimate.

  I tried to get the drivers from the same model of computer (with pre-ultimate isntalled.)

  Identifying them all help to detect / detection / providing information about where to install the drivers would be a great help.

  Thanks in advance if you think you can save me from downgrading back to home.

  ACPI\ENE0100
  * ENE0100

  Ene Cir Receiver here

  ACPI\HPQ0004
  * HPQ0004

  ProtectSmart Hard Drive Protection here

  REV_0372 & USB\VID_138A & PID_0001
  USB\VID_138A & PID_0001

  Of validity fingerprint sensor here

• XP Mode/VPC does not start on Windows 7 Ultimate upgraded from Vista Ultimate box

  1 Dell Studio 1735

  2 initially loaded with 32 bit Vista Ultimate. Including one instance of VPC 2007 carrying a XP Pro Virtual Machine

  3 before moving on to 32-bit Windows 7 compatibility check was done and recommended applications, including VPC 2007, have been uninstalled.

  4 Windows 7 upgrade was performed without incident or error and to end all applications and data were good.

  5 installed, strictly in accordance with the files of the web videos etc., XPMode, VPC and WindowsXPMode.  Once again without incident or error.

  6 in the execution either XPMode or VPC ago approximately 45 seconds of the busy HARD disk activity and then nothing.

  7 I have a backup image of the original disc loaded with Vista as it was before step 1, above, I have tried several variations on a theme whose hardware virtualization on and off the power, order of the file install etc. but nothing helps

  8 to prove the process and installation files, I did a clean load of Windows 7 then XPMode etc. on some old iron P4 and it worked a treat.  I'm actually surprised by not only it installed at all, but by the way it currently works on an area that was originally intended to spend the rest of his eternal life as a dump.

  My conclusion is that VPC 2007 uninstall is not clean; He leaves legacy shrapnel (register?) in the system which is farce VPC.  Note that the result is consistent on several uninstalls, step 7, above.

  Question; as the XPMode function is essential and will determine if a quantity of boxes are to move from Vista to Windows 7 where only once from here?

  See you soon

  Argus

  Have you downloaded the latest version of Windows Virtual PC? Microsoft has recently updated it removes the requirement of hardware-assisted virtualization: both Windows XP Mode and Windows Virtual PC is available for download on http://www.windows.com/business/downloads. For more information on system requirements, go to http://www.microsoft.com/virtual-pc, I upgraded my installation of Windows Vista Ultimate x 64 with Virtual PC 2007 SP1 3 year old last year and I was able to uninstall it and install XP Mode successfully. Andre Da Costa http://adacosta.spaces.live.com | http://www.ActiveWin.com | Microsoft MVP