Upload FTP stopped working

Similar Questions

• FTP stopped working - how to fix?

  Hello

  I have Dreamweaver CC 2015 and my ftp stopped working for all my sites.  Any ideas?

  Thank you.

  In an era where "put power off and on again" is always the solution to computer problems more than you can shake a stick at, a couple of techno-gremlins are expected from time to time.

• Windows Explorer stops working when I try to access a drive mapped on my FTP server on the internet.

  I just changed web pages (using Crimson editor) and instead to save the files on my hard drive I just left open and "hibernating" my machine overnight.  After 3 days of having an FTP connection (opened by a mapped drive) setting on my computer hibernation, I accidentally hit Shut Down, and I lost all my work, ARGH! (Yes, I know, I should have better). In any case, now when I open my computer and click on the FTP of the mapped drives, I get the message that Windows Explorer has stopped working.  And if I go to Internet explorer (7), enter ' ftp://mysite.com it brings me to a root FTP page where it says: to view this FTP site in Windows Explorer, click Page, and then click Open the FTP Site in Windows Explorer. " I do that and it brings up a window of the Explorer windows momentarily and then I get the message. Explorer Windows has stopped working.  Any ideas? I hope I don't have to reinstall the operating system.  I did a system restore to 4 days ago. It did not work.

  Hi SewNSew,

  To refine the question, I suggest you try the following steps:

  Step 1: Set the clean boot computer and try to access the drive

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software

  Important: n ' forget not the computer to start normal follow step 7 in the link

  Step 2: The utility of Auditor (SFC) for the file system allows administrators to perform an analysis of all protected resources to make sure they are the correct version. Whether SFC should find all incorrect versions in one of these protected resources, SFC will be replaced by the correct versions.

  You can still run a SFC scan on the windows vista computer. To run a scan suite SFC as follows:

  (a) click Start and in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.

  (b) at the command prompt type sfc/scannow , and then press ENTER.

  If the problem persists,

  Step 3: Disable control (UAC) user account and make sure to do this, follow these steps:

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on Turn User Account Control on or off.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the use User Account Control (UAC) to help protect your computer, clear the check box to disable UAC, and then click OK.

  Important: It is not recommended to disable UAC; We just try to limit the question. Please, enable UAC after the test is performed. See the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  See the link below for more information

  Error message when you log on to Windows Vista: "Windows Explorer has stopped working".

  http://support.Microsoft.com/kb/937093

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why Firefox stop working after I downloaded an update?

  I got a message yesterday, asking me to update my Firefox. I ignored it, and unfortunately, Firefox crashed three times during the day (yesterday). Now today, I decided to try to download the new update. I clicked on the Firefox button, help, on Firefox and as a first step, it froze and nothing happened. I tried the same process: Firefox/help/to what Firefox this time, it uploaded, then I got a message from 'apply' update. Immediately, he had logged out of Firefox so I thought that this meant that I had to shut down my computer I did. Then, when I restarted the computer, I clicked on Firefox and saw the message: Firefox has stopped working. What is going on? Help, please!

  It could be that the installation process was interrupted and didn't finish. Try using another browser to download and install a new copy of mozilla.org/firefox

• HP Envy 15 - 3040nr Sound stopped working

  Hello

  The sound on my hp envy 15-3040nr has just stopped working. I reinstalled the sound drivers, checked to see if the speakers have been disabled in Device Manager and used the tool to troubleshoot the system and security. None of them helped. Its also not working with headphones.

  Any help will be greatly appreciated.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56900.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then proceed to a "forced Reset" by holding down the power and time for 10 seconds.  When done, plug in the adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K

• 15-r014TX HP: hp support assistant stopped working

  HP support Assistant has stopped working on my hp 15 laptop r014tx. After this problem I uninstall hp support assistant and download the new assistant hp support Setup and intall but problem sloved not it still does not.
  
  I have upload a screenshot that show what happens when I open hp support assistant. There is mistake to see the then stopped.

  After that happens
  
  
  then it closes automatically.
  
  Please tell me how I can solve this problem.
  my pc is all software up to date.

  Hi @rhl_yadav,

  Thank you for your response.

  You said if you reinstall Windows, it works very well for a few days, but then comes back.

  When it works, and before it fails, what is changing?

  If you are not sure, please do a HP PC - refresh your PC to solve problems (Windows 8) to get it working again.

  Although this should not affect your personal data, I do not pretend to make a backup to ensure no data gets lost.

  Create a restore point that you can go back.  Computers HP - using Microsoft System Restore (Windows 8)

  Watch closely to see if you can determine what has changed the origin of this difficulty.

  Good luck!

• HP pavilion n203tx 15: Amd driver has stopped working and has recovered

  Hello ive been using this laptop for 2 years now and ive started suddenly get this error "amd driver has stopped working and has recovered" and sometimes one of the apps I open freezes and then I get BSOD with errror "AMD pilot State failure" any help would be appreciated.

  my laptop is Hp Pavilion 15 n203tx im using windows 8.1 I have amd radeon hd 8670 m graphics card

  Thanks in advance

  Hello

  Try this

  install the following in the same order

  Chipset: http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63965.exe & Reboot

  Graphics: http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64573.exe & Reboot

  BIOS: http://ftp.hp.com/pub/softpaq/sp73001-73500/sp73288.exe & Reboot

  Or if you have assestent installed on your laptop supports HP run all updates of pilot who.

• HP pavilion G4. Keyboard stopped working and Wifi off, unable to turn on the WiFi.

  I have a HP pavilion G4, Windows 7. Keyboard stopped working and Wifi off, cannot turn on the wireless device.  I use a keyboard usb type, but has no a wireless on/off button. I tried F12, ctrl + F12 or Alt + F12, etc. without effect. I tried the keyboard of the screen, but it also has wireless on/off button.

  Is there another way to turn on the wireless device?

  Thank you.

  First install the hp connection manager, open it and use the power in front of the wireless button to turn on the wireless connection

  link

  http://ftp.HP.com/pub/SoftPaq/sp54501-55000/sp54945.exe

• Pavilion 15-p097TX: brightness keys screen has stopped working

  I was able to adjust the brightness of my screen using the f2 + f3 key but all of a sudden they stopped working and I am not able to adjust the brightness of the screen from any place neither sign nor any other option tried some methods but they all failed

  Hello

  Try the following.

  Download the Intel HD graphics installer on the following link and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp68001-68500/sp68117.exe

  Once complete, download and reinstall the Chipset driver from the link below.

  http://ftp.HP.com/pub/SoftPaq/sp73501-74000/sp73543.exe

  Once completed the reinstallation of Chipset, do not restart requested, rather open your download folder, right-click on the Intel graphical installer and select "Run as Administrator" to launch the installation.

  When this is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Start Notepad and let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• Outputs analog BNC-2120 to stop working randomly

  I have a BNC-2120 Module. I have the analog outputs implemented with an Assist DAQ. I'm running a square wave, or triangle wave at a very slow pace (.35 Hertz). I'm tracking signals with a waveform graph just before going to the modules DAQ help. The system works well anywhere from a few minutes to 25 minutes. The results seem to just stop working, but I still see the signal on the graphic display of waveform. I think that the BNC-2120 module has some questions. Someone had a problem where the output just stop working? I look in my program of VI?

  Hi gwing,.

  There could be a few possibilities that could go wrong. Could you upload your code? DAQ hardware do you use with the BNC-2120?

  Best regards

  Jonathan

• Error message "HPSF.exe has stopped working" whenever I have open hp support assistant HP g6

  I have thought honastly this laptop couldn't be worse. I downloaded the latest version of the hp support assistant after resinstalling windows and all the other stuff of hp and when I try to get updates from hp it comes up with a

  error message saying "HPSF.exe has stopped working" from there he returns constantly with Deputy of support every time error begins.

  Windows 7 64 bit

  Please try to uninstall, download of the last being and resettlement.

  Here is the link to the latest version of HP Support Assistant:

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58915.exe

  Here is the link to the latest version of the HP Software Framework:

  http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59202.exe

  So here's a support document which guides you step by step: http://support.hp.com/us-en/document/c02435801

• Whenever I try to update, I get the message "windows Explorer has stopped working". It then seeks a solution, restarts, and immediately stops again. No error code just a constant circle. This has happened for days. I am running windows 7.

  Whenever I try to update, I get the message "windows Explorer has stopped working".  It then seeks a solution, restarts, and immediately stops again. No error, just a constant circle of shutdown and startup code.  This has happened for days.  I am running windows 7.

  I think that norton or mcafee may have been preinstalled as trial versions, but I've never actually used them. Unfortunately I can't use the windows Explorer, so I can't check if they are still there.

  We will cover all the possibilities.

  1. download each of the tools for deletion below, save it to your desktop:

  Norton Removal Tool: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee removal tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all software (including LiveUpdate and Add-ons of Norton) Norton through Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view)

  IMPORTANT! => Activate the Windows Firewall immediately after the restart.

  IMPORTANT! => Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed the steps #4, #5 and #6 below!

  4. right click on one of the files that you saved in #1 above and select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  5. Repeat step #4 for another removal tool.

  Tips:

  -Online use another computer to download the removal tool, if necessary, then transfer it to the computer via CD, DVD, or a USB brand new, never been used (flash drive), or a summer freshly updated in shape.

  -Online start the problem in Mode safe computer, if necessary, proceed as above.

  -Online after completing all of the above, uninstall AVG Free & reboot. Now do a new installation of AVG Free 9.0, this time select the CUSTOM installation option and do NOT install (uncheck) Linkscanner Search-Shield, Active Surf-Shield, security or the email of crawl components toolbar.

  Why you don't need your anti-virus to scan your email
       http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  -Online download/run system update before running Windows Update again: http://support.microsoft.com/kb/947821

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• speakers of HP pavilion dv6-7020us has stopped working

  My speakers stopped working at some point, but I don't remember programs or updates that may have caused this. I uninstalled everything I know has recently been installed. I ran an update driver for the items pertaining to the audio device manager.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp56001-56500/sp56155.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the computer and let Windows load completely.  Open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  If you have still no sound, open windows control panel, open administrative tools, and then open Services.  Verify that the following services are all showing that status = started and the Startup Type = Automatic

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  If you need to make a change to one of the above, just right-click the service and select Properties, and then in the drop-down list box next to "Startup Type", select automatic and click on apply to save the changes.  Then click on the Start button.

  Kind regards

  DP - K

• My Advisor in charge of HP has stopped working, how to fix this?

  I try to open my care advisor and it says that it has stopped working.  I can go to my control panel and do things like that.

  Please uninstall HP Total Care Advisor of add/remove programs or the option programs and features in Control Panel. Download and install the latest HP total care from following link advisor:
  FTP://ftp.HP.com/pub/SoftPaq/sp50001-50500/sp50046.exe

• My Kodak program continuously stops working.

  I use my Kodak program quite often.  However, when I'm editing, the program stops working.  Sometimes, after a few minutes, sometimes after an hour.  Also, I can not upload photos to Kodak Gallery.  I talked to Kodak, but they don't seem to know how to solve this problem.  I'd appreciate any help.  Thank you in advance.  Always learn, AL

  Hi AL,.

  Do you remember what makes any agreement, changes this question?

  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of

  the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.