USB connectors

Similar Questions

• Keyboard-mouse 5188-6816: is a replacement USB connector for a keyboard 5188-6816

  Keyboard-mouse 5188-6816 has stopped working.  The "connect" to connect the keyboard and mouse to the USB connector no light no more on the USB connector.  Technical support said I had to replace the USB connector.  Are offered through HP?  How can I find one?

  Your 2.4 GHz wireless keyboard mouse combo is not delivered with a usb cable.

  It uses a usb dongle which connects the keyboard and mouse to the PC destop wireless.

  You can't buy a replacement dongle.

  A wireless dongle is coded permanently to the pairs of keyboards and mouse at the plant combos.

  Your technical support must have told you that.

  If your keyboard was bluetooth it would have been a different story and a generic Bluetooth dongle replacement could have been bought.

  

• Audio output using the USB connector problem

  I use a USB connector to connect with Audio output. It's because my headphones Jack does not work.

  It worked without problems so far.

  My problem is that there is no output from my laptop to this USB device. The music plays and can be heard on the laptop. Connections (USB device & son) of the laptop work.

  I'm ising Vista home versio

  Any ideas?

  Try this:

  With the USB speaker connected, right click on the speaker icon on the tray (right), left click on 'sounds '. On the tab 'Read' the USB speaker should be listed, click to select it, and then click the button "set as default". Click the OK button to exit.

  Alternatively, you can go to control panel, Sound.

• Dell Inspiron 580 s can I attach mouse and keyboard which don't have USB connectors

  I have an Inspiron from Dell 580 s. It has keyboard and mouse usb connectors. I have two old keyboards (never used) and units of the mouse (usb not _ I am tech not and do not know what the connectors of the first type are called.) Can I connect these older versions of my PC (i.e. are there fittings/adapters that can fix the old type to a connector USB. Is there some type of condition of electricity who opposes this?

  Thank you

  Hello!  Google USB PS2 adapter and you should find what you are looking for.

• lost to microsoft wireless optical mouse usb connector - is it possible to continue using the mouse without the USB?

  I lost the usb connector for my 2000 microsoft wireless optical mouse for my laptop to recognize it.  Y at - it a download for my wireless laptop, so I can still use this mouse or is it still possible without the USB?

  Hi TA68.

  ·         Are you referring to transmitter/receiver for the wireless mouse?

  If so, you won't might be able to use the mouse, unless you have the device. See the following article for more information.

  How to replace hardware or lost, broken, or missing Microsoft software

• External SATA / USB connector

  DV6 - 2043CA. Can not get the SATA cable connector to fit the double SATA / USB connector.

  no SATA, eSata, which is a different connection, but you can get a SATA to eSATA adapter.

• FireWire and USB connectors

  I have PC HP Pavilion Elite e9300z equipped of a 1394 connector. Anyone know if it's a 1394 or 1394b (Firewire 400 or 800) compatible?

  If I want to add a USB 3.0 card, where should I use and what type of power connector would be used with this PC - Molex or SATA?

  Thank you very much.

  I have not found a decent picture of food on the HP site, but I found this site that has the power of HP original adduction (part 5188-2859) for this device.

  Food seems to molex and SATA power connectors, so it really depends on what is available in the system.  SATA is more recent, but either we could work as a long time that what you add support.  Just in case you don't know, white connectors are molex and the black connectors are connectors to SATA power.

  The motherboard should look like this once it is open.

  

  The three short PCI express x 1 slots is the crack you up when you add an extension like a USB card.

  It seems that the firewire port is 1394 a.

  Here are the full specifications of the motherboard if you need.

  http://support.HP.com/us-en/document/c01925486

• Question of Toshiba AT10-r: charging: mini-usb connector port is broken

  My tablet to-10A is plu 1 year bit (expired warranty then). It will no longer charge. I have already answered a few messages in the forum that indicated similar problems. Let me continue on another where I can give you a few other updates.

  There is no need to do the "factory reset" procedure because it is a hardware issue. (I have done, but as no change provided).

  I opened my Tablet and tested with a multimeter. It seems that the mini-usb port is broken (see the attachment, the 5v PIN is not in good shape), basically I don't have 5 volts there. Precisely the mini-usb port is part of a small circuit hannstar e89382 arc10L_usb_sub. That's what it should be changed. I tried to get him, but I can't find one.

  Toshiba allow this component?

  Any other idea of the people in the forum? I saw a new mini-usb port of welding, but it won't be easy, at least not for me.

  Best regards
  Luca

  Luca,

  The EU standard warranty is 2 years, but in your case I don't know how the USB port is broken. Toshiba will have to fix if it proves to be a part of the defective material. Give it a try.

• Satellite L655 - USB connectors don't work after hibernate or restart

  Hello world

  Using Windows 7 Home Premium SP1 on my Satellite L655. After prolonged or even standby restart if the devices (such as an external mouse or speakers etc.) are always connected, the USB slots does not seem to work, stay inactive.

  Even when plugging on and dragging new custom USB devices work. Only if I start the laptop when the devices are not blocked and after the laptop are running that I plug them in they work. And it applies to all 2 USB slots

  Help, please
  Thank you
  LON

  Hey Buddy,

  I m not very well, but this problem could be linked to the USB/Chipset driver. So I recommend you a chipset driver update that you can download from the official page of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  In my opinion, it has something to do with the OS or drivers. I mean the USB ports work physically because you wrote that everything works if you plugin the devices after Windows starts.

• desperately need the cradle or the USB connector

  I have an old Palm - a treo 700 p - it still works very well, but something is wrong with the cradle and I can't sync.

  I live in fear every day that your handheld will die and hurt to be left without any of my information.

  looking for info on where I can get my hands on a cradle for a pc running windows xp?

  or a usb key with a connection that corresponds to the Palm?

  I tried all computer stores, no one wears anything.

  fear of online ordering from the place that I don't know that I can trust.

  any help or info is greatly appreciated.

  Thank you!

  Thanks for the quick response - after that I posted I did a little more research online and find the sync cable.

  in fact, I found on amazon, com and shipping, paid less than $6.00 from a merchant of 5 stars.

  your help is greatly appreciated!

• USB 2 TPT connector cover

  I just bought a flash of the discrete form of the 64 GB Cruzer drive. I intend to leave inserted in the connector on the Thinkpad.

  This brings me to two questions-

  • How to permanently remove the cover of the USB connector
  • How to reattach it if I lose the Cruzer Fit

  Any help appreciated

  Thank you

  Geoffb

  Need to disassemble the TPT2 case to remove the cover of the USB connector at all times.

• Driver problem with prolific USB-to-Serial and Windows 7 connector

  I'm trying to connect a UPS to PowerPanel to my new ACER computer with 64-bit Windows 7 via a prolific USB-serial connector software. The convenience store says he has a driver problem the convenience store is unable to correct. However, messages also said that my driver is up to date and the device working properly. I have installed, uninstalled and tried to fix several different drivers, run the troubleshooter, etc.. I tried to run the stand-alone Windows Installer, but it says "not compatible with your computer." Help! Is there anything else I can try?

  Hi Mary,

  Until solve us the problem we need more information on the issue.

  ·        What is the exact error message that you receive when you connect theprolific USB-serial connector to your computer?

  ·         Could you plug the connector on the computer as soon as possible without any problem?

  ·         What is the model number of the connector?

  ·         The ups and the computer manufacturer and what is the model number?

  ·         Who is the stand-alone Windows Installer you tried to install?

   

   

  You can first check if the USB connector to prolific series model if its compatible with windows 7 Access the link below to check the compatibility with Windows 7.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  You can also contact themanufacturer prolific USB-serial connector and check if the device is compatible with Windows 7 and if you need to install any other drivers to get the device to work.

   

   

  Post back with the required information.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Connector USB virtualization driver

  Virtualization USB connector driver I started this am and got this message that the pc had installed a (USB connector driver virtualization) what is it and why did it install?

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  I would like to enlighten you with the fact that there are a few old existing devices and if you want to run in compatibility mode in Windows 7 environment outside the execution of each individual query, what we can do is to install Windows XP mode. Some USB devices in a Virtual Machine (VM) are:

  • Printers
  • Flash memory sticks
  • External hard drives
  • Webcams and digital cameras
  • Smart cards

  WVPC uses the Redirection Policy Manager (RPM) of the windows to provide USB redirection in a Virtual Machine. It loads another driver instead of the original driver to redirect the device to a virtual machine. WVPC creates a host controller virtualized in the Virtual Machine that is available using a channel of Bus of VPC.

  Following diagram shows the difference between the normal USB architecture and architecture of Virtual USB:

  

  Note: You might have had your automatic updates "turned on" on the Windows XP mode environment and this is the reason why the resulting virtual driver automatically installed.

  Hope this information is useful. Please feel free to answer in case you have other problems with Windows, we will be happy to help you.

• Can you iPhone 7 connect to USB headset

  Hello!

  I am the owner reasonably high-end headphones Sennheiser Momentum M2 wireless. It connects to my iPhone via bluetooth or using removable 3.5 mm plug + cable. When I use it with my MacBook, I connect USB cable to the USB port on my MacBook Pro to listen to the audio quality (M2 these headphones have a micro-USB connector).

  It made me wonder if I could connect my M2 headset with my iPhone 7 using a micro-USB male for cable male-lightning and listen to music when, for example, the battery is dead, or when I want the best quality audio.

  Thanks in advance for taking the time to answer my question.

  No, the usb headset is cards usb audio full blown for computers that require device drivers work

• USB 3 material

  Hi, I'm not sure but during the inspection of my iMac (end of 2013), which is supposed to support USB 3 I see the USB sockets only have 4 pins, now all the control I did said it is only USB 2 unless you use a double power cable (IE 2 catches USB 2) is correct that it is the only way to connect a 3 USB device? so I thought I would check out my MacBook Pro (2015) the there are 2 ports USB, one on each side and two ports show that 4-pin. so, how does the USB 3 get speeds of up to 5Gbps, can someone with technical knowledge that explain.

  There are two models of iMac ' end 2013 ",-21, 5 and 27 inches.

  sheet Apple support:

  •iMac (21.5 inch, end 2013) - technical specifications

  iMac (21.5 inches, end 2013)... Four USB ports 3... (Turbo Boost up to)

  3.9 GHz) with 8 MB of cache L3; iMac and the environment.

  support.apple.com/kb/SP687?locale=en_US

  iMac (27 inches, end 2013) - technical specifications

  iMac (27 inches, end 2013) - technical specifications. ... Four USB ports 3...

  Your iMac comes with 90 days of telephone support and free one year...

  support.apple.com/kb/SP688

  EveryMac.com:

  •iMac Record of 21.5 inches (end 2013) 2.7 "Core i5" (end 2013 ...

  Factsheet of the iMac "Core i5" 2.7 21.5 inches (end 2013). ...

  Graphics"and it allocates up to 1.5 GB of... USB 3.0 ports. No Firewire port...

  everymac.com/Systems/Apple/iMac/specs/iMac-Core-i

  iMac Record of 27 inches (end 2013) 3.5 "Core i7" (end 2013 ...

  Apple iMac "Core i7" 3.5 27 inches (end 2013) Specs. ... Connectivity includes

  four USB 3.0 ports... that provides a theoretical maximum of 10 Gbps of band...

  everymac.com/Systems/Apple/iMac/specs/iMac-

  If the specifications confirm their claim. Backward compatible

  for USB 2.0. There are additional points of connectivity to consider.

  Comparison: http://www.l-com.com/content/USB-Connector-Chart.html

  • USB 3.0 internal connector and cable Specifications: Intel.com:

  http://www.Intel.com/content/www/us/en/IO/universal-serial-bus/USB3-internal-con cable-nector - specification.html

  {Note: mid-2011 to 21.5-inch iMac & 27 inches have slower USB 2.0 spec}

  Good luck & happy computing!