Vectors force to shut down

Similar Questions

• Pro Late 2011: Force Quit applications or shut down/restart computer.

  Cannot force quit applications (happened with several applications, five9, firefox crash reporter, etc.). Basically, if the application has stopped responding, can not force quit or remove the dock or anything like that. Cannot restart or shut down computer either. I'm stuck with inadmissible apps in dock to the computer press the power button to stop / stop.

  Tried Terminal without any result.

  MacBook Pro (15 inch, late 2011)

  Intel Core i7 2.2 GHz

  4 GB 1333 MHz DDR3

  Intel HD Graphics 3000 384

  What are the circumstances?  Just update to 10.11.5?

  Software Tablet Wacom has been known to cause these problems to the

  Uninstalling Wacom

• When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Original title: closed to stop forced mediacontextnotificationwindow

  I'm having a problem with a 'program'... ? When shutting down my computer, Windows tries to close with force "Mediacontextnotificationwindow"... any idea on what it is and how to solve this problem?

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the exact message?

  Perform the clean boot may help you resolve this problem.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  a. click Startand then click run.
  b. type msconfigand click OK.

  The System Configuration Utility dialog box appears.

  c. click on the general tab, click Normal Startup - load all device drivers and services and then click OK.
  d. When you are prompted, click on restart to restart the computer.

• How to suspend, restart, shut down as default instead of Force *.

  I know it's strange, but I still see "Force Suspend, restart of strength and force Shut Down" when I click on the menu 'Virtual Machine' WITHOUT hold down the Option key.  This also affects the behavior when I set the preference 'when you close the virtual machine"to"Turn off the virtual machine", as he always does force stops instead of a graceful.  Note I can hold the Option key to Force * to go and make the soft stop, but that's all just annoying.

  So the question is, how can I make sure the normal shutdown of suspend, restart, are the default actions?

  My system is:

  Mac Pro 2 x 2.66 GHz Dual - Core Intel Xeon

  Mac OS X 10.5.8

  VMware Fusion 3.0.1 (215242)

  Windows XP SP3 VM (2 CPUs, 2048 MB RAM, 3D active)

  Thank you!

  The default power options are controlled by the .vmx powerType.* entries, and I think that they are also affected by the question of whether the tools are installed. You want the following lines:

  powerType.powerOff = "soft"
  powerType.powerOn = "soft"
  powerType.suspend = "soft"
  powerType.reset = "soft"
  

  (as opposed to the 'hard'). These should have been set this way automatically, but if you have imported the virtual machine from another source, they can be different.

  Note that if the client does not know how to properly manage power plants, that does not help.

• MacBook Air 5.2 not shut down or restart.

  Hello.

  My MacBook Air 13' with OS 10.11.5 won't close (or restart) - usually. I have had this problem since Yosemite, but don't remember exactly under what version it began.

  To be more precise: current stop, all icons disappear (as usual), but the image of the Office remains active. I can always start other programs is Finder that is affected. Trying to Force Quit Finder does not help. Repeatedly (say 99 / 100 to give a number) it closed normally, but nothing in fact different... Judge without plugging anything if there's a device problem. Saute all automatic connect points. Cleaned cache and preference files dead (using Cocktail).

  What is a way I can follow the Shut Down procedure to see where it falls? Activity monitor?

  Thanks for all advice :-)

  Found the solution in an another tread with (almost) the same Air. Uninstalling the Wacom driver (in my case using AppCleaner) solved the problem. I wasn't the way of editing, since the latest driver for my bamboo tablet was the same version I had installed... (5.3.6-6). maybe a new installation works, but for now, I'm better of without the tablet. Thanks to click!

• iMac won't restart or shut down after having been 10.11.5

  He said title. My iMac was fine before the update came through yesterday. I went to reboot tonight because the RAM used was realllllly high and I thought a solid reboot after update from yesterday could be a good thing (don't ask why - just my logic)... and surprise! -He has authorized the menu bar and leave viewfinder, but would not closed at all. I could always use the dock to load and use applications. I saw another thread that mentions deleting stuff from Wacom. I went and emptied all of my items found from Wacom. Still will not be closed. I have reset several times VRAM. I can do a forced shutdown, and he'll sleep ok. Activity monitor shows nothing super weird, even if it always shows Wacom and Tablet drivers running.

  Anyone else running into this? Or have an idea?

  Please?

  Hello..

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Upper left corner of your screen, click on the Apple  > Shut Down.

  After your Mac stops, wait 10 seconds, then press the power button.

  As soon as you hear the startup tone, hold down the SHIFT key. You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  Release the SHIFT key when you see the gray Apple logo and progress indicator.

  Once you are in Mode without failure, return to the menu Apple . In the drop-down list, click: reboot

  On Safe Mode

• HP Pavilion 6510: Start Menu Shut Down tab always indicates that the updates are available

  The Shut Down on the start menu tab always indicates that there ae updates available.  This persists even after manually searching for and downloading updates.

  Then Microsoft Fixit has been executed, the computer has restarted, and 5 updates have been installed.  But the start menu still indicates that there are updates available.

  This could be the cause?

  How this should be dealt with?

  Is there some updates that aren't installed properly, and if so this could affect the security of the computer?

  Hello

  Go here and download "never 10.

  Run the program. It will turn off the Win 10 forced update.

  Jay

• Laptop HP Pavilion 15-n073sl: unable to shut down the pc

  Fifteen days ago, my computer (which I've updated for Windows 10 on 16 June) updated itself last built Windows 10, since then 4 times out of 5 I'm not able to close properly.

  I close all the programs the I click on start and closing of the option. It starts to shut, but when the screen goes black, it freezes and stuck there with all the leads keybord and internal fan on so I have to force shutdown by the Start button.

  I spoke with the support of Microsoft and they told me that it depends on the fact that HP has not released a driver for the new version of Windows 10 (build 1607 14393.187 SO).

  ... What am I what to do now? I downloaded the update from the HP Support Assistant software, but it is empty of any update. On the page of the driver of my laptop on the HP site, I found some drivers, but I don't know if I have to download them all, or I don't know.

  Hope for more assistance,

  Thanks to that answer.

  Hello

  Try the following.

  Again, open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close all open windows.  Stop the laptop by right clicking the icon in the Start Menu, select prompt (Admin) and click 'Yes' to the uac prompt.

  Type (or copy and paste) the following command (including spaces) and click Enter.

  Shutdown /s /t 0

  Start Notepad and when reloaded windows, hold down the Windows key and press R

  In the run box, type devmgmt.msc and press ENTER.

  In the Device Manager window, expand System devices, and then scroll to the Intel Management Engine Interfaceentry, cela a right click and select Properties.  Select the driver tab and select uninstall driver - and then proceed with the uninstall.

  Restart the computer and let Windows idle for 5 to 10 minutes just to give time to reload the driver imei.

  Restart the computer again (fast start disabled for the moment leave) and see if it will now shut down properly.

  If so, reactivate a quick start and check if it will always stop Ok.

  Kind regards

  DP - K

• Satellite A30 shuts down / blocks

  Hello
  I have a Toshiba Satellite A30 for about 2 years with no problems. Until today...

  I was chatting on MSN Messenger, but had to put my missing status and left the computer for about an hour.

  When I came back to it, the screen was all what it was when I left, but there was no control of the mouse, no whirring HARD drive away, not nothing. In fact, it seemed that he had closed the partitally without turning off the screen.

  The only way I could reboot had to turn off the power. I disconnected the battery, reconnected everything and tried to reload. I don't even have as much as Logo of Toshiba screen, click on the HARD drive, * which is normal for this machine * and off.

  I thought that maybe it was an overheating issue, then I left for half an hour and go home. This time it restarts, but the display was all out of sync. was on 800 x 600 when its usually on the following resolution. (Don't remember who he is). I ran dxdiag and he told me that there is no present display driver, as I had reloaded using the last well known record. It was not a problem, I reinstalled drivers, restarted without any problem.

  Everything was fine for 2 h with the laptop, so at this point, I don't think it was a heat issue. I went through the net, when hung just computer still once, I lost all control of the mouse, even if the optical lights on it were always activate when moved, and he seemed to stop again.

  Well, I left for 10 minutes, he came back and tried again, it started ok, but as soon as I tried to access anything, he hung up again, forcing me to press the power button to shut down.

  Sorry for the lengthy post, but can anyone shed light on this point, I use my laptop on a daily basis, and there are things about it, as I need to access.

  I hope someone can help

  Thank you

  Fruitini

  Hello

  It is very interesting because it can happen to anyone. I really put t know which can block the laptop. On this way, we can only speculate and it is really not easy to say why this happens to concrete.

  I put t know how is your unit configured and that these (process) applications run in the background, but you can try to stop all the unnecessary stuff and see what is happening in this case. Check the Device Manager and make sure that everything is properly recognized. After that create a system restore point and in this way you can restore the system to an earlier time if something goes wrong.

  If you do not find what happens I recommend you back up the data and do the recovery procedure. On this way the unit will be own pre-installed and things like this can happen. As you know sometimes happen oddities and there is no logical explanation.

  Good luck!

• Windows XP SP3: Hang all night @ "Windows is shutting down"... "Start button / stop is my only option?

  I don't know where else to ask this... been going from one site to the other, books, etc., for hours looking for titles of threads that fit, but always leave out this something... medium or average power down.  do not use the power button, except if no other option out there.

  When I left my pc last night, everything seemed fine.  I decided to leave it on and not yet started to disconnect, etc..  Not sure if there was anything during the night (update?) which requires a reboot, but, when I'm happened to pc this morning it was hanging at the "Windows is shutting down" screen... "Windows and continued so for a few hours I tried to understand.

  This happened to me for the first time last week.  I don't have another source to the internet at the time, so I have 'given' and ended up using the power button.  I rebooted and immediately stopped to see if it would happen again, but everything was fine.  (Knew I should have troubleshooted!) The pc seemed so far.

  I read a number of suggestions to solve problems in other posts, but they all begin with the assumption that the pc is in a State of "exploitable".

  Step # 1 is need now is my only option to turn off, forcing a stop down with the power button?

  I'm going batty at this stage.  Any guidance appreciated.

  It might be.

  I know that superantispyware does not remove itself completely as you use their uninstaller or add/remove.

  Obviously, it's one of their drivers still installed, you must remove this item and then check if you still have a problem.

  Post back with the results.

  There are several posts on this problem, perhaps one of them will help you if removal of the driver does not.

• Because the computer may not shut down properly the recovery fails on HP G60-519WM

  1.) product name and number: HP G60-519WM

  (2.) operating system installed: Windows 7 64-bit

  (3.) error message:

  Impossible to restart the computer

  Windows cannot restart the computer in the

  To complete Windows recovery environment the

  recovery operation.

  4.) all changes to your system until the problem was happening:

  I think I have a type of malware or something because my computer started running slower and I continue to be redirected to Web sites randomly when I use Google or Bing.  Records on the right side of my Start menu as 'Computer' and 'My Documents' disappeared.  I also get this an update for Windows live which stops at 57%.

  Problem:

  There is no restore point on my computer if I want to perform a system recovery back to the image of the manufactuer.  I downloaded the USB recovery Flash Disk Utility for my model.  Now I want to recover my computer via USB, but when I run the advanced recovery mode he's trying to restart my computer.  Given that my computer will not shut down properly, I end up having to press the power button until it stops my computer and the recovery does not continue when I start my computer again.

  I tried to use F11, but then I just end up on a screen that says either press on enter to choose to continue with Windows 7, press tab to move to the bottom of the list or press ESC for more options.  I tried all three and they eventually freeze the screen and keys are starting to make a Summit high-pitched beep when I try to press one, so I end up having to force my laptop to stop.

  I also tried to make recovery by pressing F8 and then choosing the "repair your computer option.  Which causes my computer screen go black, and I end up having to force it to close again.

  Is it possible to restore my computer to factory settings?

  Any help would be greatly appreciated!

  JES

  Hi, Jes:

  Yes, it would be the battery.  The relatively heavy bar that is normally removed retainers of slide.

  From what you described, I am afraid that your PC needs a lot of work (probably a bad motherboard), and you'd be much better to buy a new laptop or refurbished, than to pay a lot of money to fix yours.

  I guess you would have to pay more than $200 for repair.

  I'm sorry this is probably not what you wanted to hear.

  Best regards

  Paul

• Icons remain in place when I shut down or restart

  My icons move and expand on the restart or shut down my computer. I tried so many ways to address this issue and nothing that I do work!
  I want that my icons organized and light them as I wish. It's so awkward knowing that everytime I restart or shutdown my PC, they get auto disposed in the left side in a court order, I don't want them to be. They seem to be locked in an alphabetical order form and even when I unchecked everything and try to arrange my icons, each time to restart or shut down, they self organized, put in alphabetical order and to a medium size (I mean small) on the left side of the desktop.

  I tried to refresh all moving them, making sure that the theme of my office does not allow changes, the SHIFT while clicking on, updated drivers but nothing works!

  I have Windows 7 and ATI Radeon card graphics card. This problem has occurred as soon as I forced a stop down by holding down the power button. It wasn't the first time I did it, but for some reason, it happened today.

  Discover the information on the website of this part 3.
  http://www.howtogeek.com/HOWTO/Windows-Vista/save-and-restore-desktop-icon-layout-in-Windows-Vista/

  It might be useful, however, Microsoft cannot guarantee that problems resulting from the use of third-party Solutions can be solved. With the help of suggestions from third party is at your own risk.

• Windows 7 won't Shut Down - continues to restart

  Hi all

  I can't get my new HP 6550 probook b to close. I can force by using the power button, but I can't stop using the Shut Down options on the screen. Can someone help me? When I force using the power button, I get a black screen that tells me that the computer has not been closed correctly and that I can't continue in safe mode. I need a solution because it drives me crazy!

  Hi Toronto1982,

  1. what happens when you try to shut down the computer?

  2. Since when are you facing this problem?

  Step 1

  Check if the problem occurs in safe mode.

  Start in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2

  Put your computer to boot in order to check if the problem is caused by any application.
  http://support.Microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Start in normal mode and check the status.

  Step 3

  If the problem persists, check the event viewer.

  What are the information in event logs? (Event Viewer)
  b http://Windows.Microsoft.com/en-US/Windows-Vista/What-information-appears-in-event-logs-Event-Viewer

  REFERENCE:
  A computer that is running Windows 7 does not start when force you the computer to shut down
  http://support.Microsoft.com/kb/974719

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• Cannot shut down the computer properly

  * Original title: trouble

  Can someone help identify me the programs running on the computer? He informs me always force shut down the computer because some applications running behind. Since I could not know all the applications running on my taskbar... Y at - it an idea to browse all running applications so that I can all be closed before shut down us my computer?

  Hello

  1. What is the exact error message?

  2 has there been recent changes made on the computer before the show?

  Please try to update us with the results and the methods provided below.

  Method 1: Perform the clean boot and check

  It may be that a third-party application is causing this issue. Put the system at boot.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following step 7.

  Method 2: Run the patch section and check if it helps.

  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

   

  For more information, see the articles and check out them.

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Turn off your computer properly

  http://Windows.Microsoft.com/is-is/Windows7/turning-off-your-computer-properly

  Let us know if it helps!

• Shut Down the menu problem.

  I was directed to this sup forum via a suggestion in the thread below:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_update/shut-down-defaulting-to-switch-user/f60c9bed-0dfb-43D9-b2dc-e1fc56184e58

  To summarize, I got 64-bit Windows 8 and it took about a year for me to understand this.  When Windows Update scored the system to require a reboot to apply updates.  The default option of "Shut Down" in the "Shutdown Windows" dialog box. (Accessible by typing 'Alt F4' from the desktop) going to "change user".  Windows will continue to "Change user" until you choose either "restart and apply Updates" by default manually or when Windows Update moves to force the restart itself in a few days.  There is no logical reason I can think of for this change to 'change user '.  I think he's probably supposed to be change to "Restart and apply Updates", but I think there is a bug in the game.  Please let me know if this is the right sup forum for what will be displayed in the.

  Thank you

  Bob

  You can set this option under GPEDIT.msc: