Video advantage OS supported

Similar Questions

• Nikon D5300 videos are not supported on iPad Mini 1

  Hello everyone

  I have a Nikon D5300 and I shot a lot of videos in HD 1080 p (60 p)! Videos play really well and smoothly the camera, but when I try to import them using itunes then itunes says: «the selected videos cannot be transferred because they are not playable on iPad»

  I don't know why! Is there any solution for this?

  I tried the Nikon MobileUtilty app to share the video via wifi but same problem, that it is not imported!

  Photos are imported fine, but don't upload videos! What is c?

  How can I import my D5300 videos to my iPad mini 1?

  Video formats are supported?

  Here's what the iPad support Mini:

  Video formats supported: H.264 video up to 1080 p, 60 fps, high profile 4.2 with AAC - LC audio up to 160 Kbps, 48 kHz, audio stereo formats .m4v, .mp4 and .mov; MPEG-4 video up to 2.5 Mbps, 640 x 480 pixels, 30 frames per second, basic profile with AAC - LC audio up to 160 Kbps per channel, 48 kHz audio stereo in the formats .m4v, .mp4, and .mov file formats; Motion JPEG (M-JPEG) up to 35 Mbps, 1280 x 720 pixels, 30 frames per second, audio in ulaw, PCM stereo audio in .avi format format

• Satellite U300 connected to the TV - video format not supported

  I am using Toshiba Satellite U300-15 q and it has a vga output, so I bought a cable and a box that transfers analog signal to VGA to hdmi digital so that I can connect to my Sony TV are 32 '.

  But if I connect it it says on the tv in video format not supported in yellow letters.
  Why is this and how do I solve this problem?

  Throughout history the problem is you are using third party hardware or software so described this issue has nothing to do with your laptop computer Toshiba or Toshiba in general.

  On the mobile side is important, the video signal is sent to the right path. What will afterwards and why this signal is not transformed correctly falls within this box.
  What box are you using?

  In my opinion you should contact the manufacturer of this box and their support. They should know how it works and how to solve this problem.
  In General, Toshiba has nothing to do with this problem.

• Video controller (VGA support) not found

  Hello!
  Please guide me.
  
  I'm looking for - VIDEO CONTROLLER (VGA SUPPORT)
  FOR MY COMPUTER
  
  HP Pavilion w1164d desktop PC
  
  -name of the monitor hp pavilion mx 704
  
  Microsoft windows xp professional (5.1, Build 2600)
  Manufacturer: Hewlett-Packard
  BIOS hoenix - AwardBios v6.00PG
  Processor: Intel (R) Pentium (r) CPU 2 .80GHz
  RAM-1 GB (updated)
  32 bit
  SP3
  ..........
  OPERATING SYSTEM:
  Please give me the link to download the
  good pilot.
  
  Kind regards

  Hello!

  Thank you very much, I found the solution-

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=PV-23202-2&cc=us&DLC=en&LC=en&OS=228&product=441189&sw_lang=

  You helped me very much iam thank ful you.

  Kind regards

• Game room requires a video card that supports shader model 3.0 your video card does not meet these requirements

  I downloaded Microsoft Games for Windows - Live. I then downloaded & installed the game games room. When I tried to play it I got this error: game room requires a video card that supports shader model 3.0 your video card does not meet these requirements: How can I fix? Will this work? http://www.download3k.com/system-utilities/system-maintenance/download-graphics-card-driver-update.html

  Hello Ann42633,

  If you have not changed the video card that you purchased your computer, you can visit the Dell Web site and use the service tag to determine the video card.

  In addition, you can locate the type of video card you have by the following text:

  -Click Start

  -Type Device Manager into the start menu search box, press enter

  -Develop graphics cards

  You must also obtain the appropriate driver from the Dell Web site and update your video card.

  Hope this helps

  Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I remove my video screen not supported

  Philippe I svich on my compjuter it Deniz in the midel of my video screen not supported and I canoe remove at all for 2 days I got that in my thank you screen

  Hi Qamilmurturi,

  You can check in mode low resolution and see if it helps.

  You can read the following article to activate the low resolution:

  Startup options (including safe mode)

  If it works in mode low resolution, then you can change the resolution of the screen, restart the computer and check.

  For more information, you can consult the following article:

  Change the screen resolution

• I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  I have a desktop with Windows Vista. Many times, the screen is the gel with an error massage "video Mode not supported". What could be the problem and the solution. ?

  Hi Izzy Nagar,

  ·         Exactly when you receive this error message?

  ·         Did you do changes on the computer before the show?

  ·         Do you have any extended monitor connected to the computer in the past or at the present time?

  Follow the suggestions below for a possible solution:

  Method 1: You can try to reduce the resolution of the screen (lower), then check if the message still appears.

  Check also if the refresh rate of the monitor is set correctly and check the manual of the monitor for assistance.

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/ways-to-improve-display-quality

   

  Flicker of the correct monitor (refresh rate)

  http://Windows.Microsoft.com/en-us/Windows-Vista/correct-monitor-flicker-refresh-rate

  Method 2: Use the option ' enable video low resolution (640 × 480) "start, then update your video card driver and check if the problem still persists.

  a. click the Start button, click the arrow next to Shut Down and then click on restart.

  b. do one of the following:

  ·         If your computer has a single operating system installed, press and hold the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, try again by waiting until the Windows logon prompt appears, and then stop and restart your computer.

  ·         If your computer has more than one operating system, use the arrow keys to select the operating system you want to start in safe mode, and then press F8.

  c. on the Advanced Boot Options screen, use the arrow keys to select activate video low resolution (640 × 480) and press ENTER.

  d. connect to your computer with an account of a user who has administrator rights.

  e. If you can see your desktop, there is a problem with your video card. Try to update your video card driver. For more information, see the article:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps.

• Why is Win XP Pro SP3 computer get error 'no video with format supported or a MIME type found.

  I have a Windows XP Pro SP3 computer, and I get the error 'No video with format supported or a MIME type found.' When I try to watch videos in the browser. I used to be able to view the videos, but 3 months ago they stopped working and I started to receive the above error message. What could be the cause for it? Thanks a lot for your time and help! God bless you!

  Daffodil5 said

  The site "paperwishes.com" (card making supplies) plays videos of product for some of its products. A blue box shows the word 'Play' next to the item. When I clicked on this blue box last spring, he'd always play. He's now hit & miss. Sometimes, it will offer to play via MP4, but rarely. Their 'webisode' will play not (who played in the spring, as well). Cannot understand what has changed: Google update leaving Windows XP in the past?

  Videos on the site can be read with an HTML5 player and do not use the Flash Player Plugin like a video I cheacked used HTML5 player when I right click on it. Actually, it turns out the link video was a Youtube video and YT uses the HTML5 player when possible and descends to Flash Player if need be if they always support such.

  With a little work, you can get the video to work in Firefox on the old WinXP EOL of HTML5.

  http://www.MSFN.org/Board/topic/175591-enable-MP4-h264-AAC-HTML5-video-in-Firefox-on-Windows-XP-without-Flash/

• Onboard video Inspiron 660 supports two monitors?

  Hello

  I just got a new 660 Insipron and wasn't able to set up two monitors with the integrated video card. I have connected a monitor via the VGA to VGA-in output and the other by the HDMI to DVI-in via a converter. I can get video with output VGA or HDMI-out single, but not both. Is it because that the integrated video card do support a monitor at the same time? Thank you.

  arborglen

  Hi Arborglen,

  Welcome to the Dell Community.

  I understand that you are however technically it is not possible to set up two monitors with the integrated video card. If you want to configure dual monitor with the computer, and then you add a graphics card with support dual monitor to get the functionality.

  Answer please if you have any questions.

  Thank you best regards &,.

  Dell_Appu_S

  Dell social media autoresponder reference

  http://www.Facebook.com/Dell

  https://Twitter.com/DellCares

• Sims 3 (win7) and "device 0 cannot run this title, no video graphics card supported not detected."

  Hello

  I just got the Sims 3 for Christmas, and I can't get it started.

  I just bought a new p7-1126 of hp computer that meets all the reqs as documented on the site of AMD System. (win7 64 bit, 1 TB hd, 6 GB ram, amd quad core 2.4 GHz processor)

  This computer has an amd radeon hd 6550d graph with / 3 gb (I think) (which is more than 128 MB recommended)

  and the drivers are up to date.

  I get the error message "device 0 cannot run this title, no video graphics card supported not detected" and I can't seem to do anything to solve this problem.

  I've uninstalled and reinstalled the Sims3 deluxe/ambitions three times now, with the expansion of ambitions installed so the third time.

  I did a lot of other things as suggested in line when I did research but nothing works.

  Help is appreciated and I hope we can get this fixed a problem. Thank you!!

  Hello

  Please provide information of the log of the event viewer.

  Information on the Event Viewer log shows that there is a problem with your memory (0xc0000005 error code).

  I suggest you run a diagnosis of memory on your computer and check if all goes well.

  Click on the links below and follow the instructions on the article to test memory on your computer.

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-know-if-my-computer-has-a-memory-problem

  http://Windows.Microsoft.com/en-us/Windows7/diagnosing-memory-problems-on-your-computer

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Cisco Unified Video Advantage connect not not Cisco IP Phone

  Hi, I have the following text:

  • CUVA 2.2.2.0 installed on windows 7 x 64.
  • UC560.
  • IP phone 7965.

  The first time I installed the program, everything was ok, didn t try the video feature, but it was connecting and recognize.

  Now I'm with another phone, also a 7965 but CUVA said that it is not connected. He also says: "cisco unified video advantage can't connect to cisco ip phone" and asked him to contact the system administrator.

  It has been a long time (about 3 weeks) because I checked the last time he was working on the previous phone, I'm not sure if it's because I'm on another phone now, but I do not.

  Any ideas?

  When you go to CUVA-> all show the driver see CDP?

  Have you tried to close your wireless adapter or set a higher metric?

  Got a GPO that would restrict CUVA on windows firewall?

• Video clips will play is more - video format not supported

  Please help. I recently transferred an iPhone 4s to an iphone 5. All images and videos were transferred in the shop. I came now to actually play the video and I get this message. "unsupported video format" Please can anyone help. Here are videos of precious I know I should have saved but I did not.

  Hello riley-riley,.

  Thanks for this info and choosing the communities Support from Apple. I know how important to get these videos work again is to you! As I understand it, you can't play videos on your 5 new iPhone that you had on your old iPhone 4S since the transfer of your personal data to your new phone. I have some suggestions to solve this problem and get those videos works again!

  1. first of all, please, import videos from your iPhone 5 to a computer and try to play on the computer. After importation, do not delete or remove it from your iPhone, just to be sure. I also recommend making a backup at this stage, as well.

  Import photos and videos from your iPhone, iPad or iPod touch
  The backup of your iPhone, iPad and iPod touch

  2. If the videos play on your computer after you import, then you can try this copy of the video from the computer to your iPhone using iTunes synchronization. Once you sync videos to iPhone, trying to play two copies of the same video and see if they work.

  Keep your photos safely stored and updated on all your devices

  See you soon!

• Video format not supported in the camera. Help?

  My phone was used to take some videos of my horse jumping during a show. 3 videos read perfectly but the main I wanted says it is 0:00 in length and shows as just a white tile in the camera roll and when you click on play the phone tells me it is a unsupported video format and that the film cannot be read because the video format is not supported. Its an iPhone 6 s and I have never had this problem before. I tried to import on my macbook, but that will not import the file from my phone, once again because it is a format that is not supported.

  I don't understand how the file may be unsupported, when she was taken on the phone...?

  Any help is appreciated!

  Thanks in advance

  Your video file is corrupt maybe talk to Apple

  For the most part it is caused by a software bug

• Import of video camera not supported

  I have a SONY DCR-TR700 dial 8 camcorder that is not listed, supported by the FCPX. Is there a work around that would make it possible to import videos on this camera of seals in a hard drive?

  To connect to the Mac via the cable firewire then use QuickTime X to capture.

  Al

• Updated video player in support of GL 2.0 or higher

  I use the R) G33/31 Express Family Chipset, version 7.15.10 1666.  I recently acquired a software, resize perfect & manf. by OnOne Software. OS Vista and nee d update my video card driver that will support GL 2.0 or higher.  Now installed on my computer is an Intel processor (what the driver update you recomment?)

  I need to upgrade the card driver video on my computer to load GL 2.0 or higher as I recently acquired the perfect software 7 resize, manufactured by OnOne Software.  My computer using Vista and currently has the Intel (R) G33/31 Express Chipset Family, version of the driver 7.15.10 1666 installed.

  I intend to use the perfect software 7 resize as a plug-in for Photoshop Elements 9 and can do it until I have a compatible with GL 2.0 or higher video card driver.

  What do you recommend?  Thanks for your help.

  Hello

  I advise you to look for video card manufacturers such as AMD and NVidia. Links: http://www.nvidia.com/content/global/global.php

  http://www.AMD.com/us/pages/AMDHomePage.aspx

  You can also use your favorite search engine and look for the driver that will allow your needs.

  Note: Microsoft cannot guarantee that problems resulting from the use of third-party software can be resolved. Software using third party is at your own risk.