virtualization of Windows 2000 cannot start inaccessible_boot_device

Similar Questions

• Satellite Pro A60: Windows XP cannot start isapnp.sys driver missing or corrupt

  I had a Satellite Pro A60 for about 3 years without problems.

  Last week Toshiba touchscreen developed vertical lines of the bleeding and I got error message "Windows XP cannot start because of the missing or damaged driver isapnp.sys. I tried using the recovery disk, but it loads OK, but it fails to make a difference. Hard drive seems to work OK as slave to another computer.

  No matter what wil suggestions appreciated!

  Thank you

  Found this Microsoft Knowledge base article:
  You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup

  http://support.Microsoft.com/kb/315311/en-us/

  Can it help

• Re: Error Dell Vostro 200 - at startup: "Windows XP cannot start."

  When I turn on the PC, the following text is displayed:

  Windows XP cannot start, load needed DLLs for kernel.

  During the installation of Windows: File\i386\halaacpi.dll could not be loaded. the error code is 7. Implementation cannot continue.

  Hi MzJo,

  1. Did you the latest changes on the computer?
  2. You are able to boot into Windows after the error message?
  3. When was the last time it was working fine?
  4. You have security software installed on the computer?
  5. You try to install or upgrade to Windows XP?

  See the articles below and check if it helps.

  Error Messages When you start your computer if Program Files of Windows are missing or corrupted

  http://support.Microsoft.com/kb/812450

  Error message: Windows did not start because of an error in...

  http://support.Microsoft.com/kb/326671

  Windows XP problems with damaged or incompatible hardware

  http://support.Microsoft.com/kb/330181

• 'Comfort Curve Keyboard 2000' cannot start (code 10)

  Hi, my laptop cannot detect my external keyboard. The keyboard is the 'Comfort Curve Keyboard 2000'. Laptop is an ACER ASPIRE 5738 G running Windows 7, 64-bit, the publishing house.

  When I plug in the keyboard, Windows says it can't find a driver for the device and if I manually select HID keyboard driver, Windows indicates that the device cannot start (code 10).

  I already tried to uninstall all USB devices and restart the system, but it did not work.

  Any suggestion?

  Hi Stefano,

  If the device has a FailReasonString value in its hardware key, that string is displayed in the error message. The driver or enumerator places this registry string value there. If there is no FailReasonString in the hardware key, you receive the following error message.

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Follow the steps to solve the problem of hardware in the computer:

  Method 1: Run the fixit to solve hardware problems:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2: Check the boot to find that there is no conflict applications/programs:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup.

  Please contact the Microsoft Hardware support:

  http://www.Microsoft.com/hardware/en-IE/p/comfort-curve-keyboard-2000#support

  Let us know the result.

• Windows 7 - "cannot start service Windows Security Center" aka WSCSVC. Error 1075

  Set indicator important message...

  "The Windows Security Center service cannot be started.

  This happened after I was deleting my WINDOWS 7 malware/virus. I open "SERVICES" went to the CENTER of the SECURITY in respect of services and a click with the right button on the name WSCSVC or attempt to start the service, following the verbosed of error/warning:

  "Windows failed to start the service on Local Computer Security Center.

  "Error 1075: the dependency service does not exist or has been marked for deletion.

  I think this may have had parts removed by Hijack, Anti-Malware, TDSSkiller, gmer, Housecall or ComboFix when I get rid of my system from Malware/Trojan/virus. With the exception of the Security Center, my system is now working well.

  The WSCSVC registry may have been deleted and the residue in the capture instant/backup/restore points. I know This is a very important function to have running, as it monitors your safe; Firewall, antivirus, UAC, Anti-Spyware and updates, etc.

  How to restore this program back to its normal state of operation, even if there are no backup? IE (manually enter the information in the registry?

  I'll be somewhere pointed to download the replacement program? Perhaps out of the installation DVD WIN7?

  Are there other ways as an option to solve this problem? Perhaps, another Member of program state and remove the remains of Security Center?

  Thanx

  In any case, this might do the trick: http://www.winhelponline.com/blog/error-1075-when-starting-the-security-center-service/

  Note: I know it's for Windows XP, but the same steps will apply to a Windows 7 computer running.

  Itknowledge24.com

• Client Windows 2000 cannot connect

  Hi all

  I have a Pix515 and am trying to get windows 2000 to connect VPN to L2TP over ipsec. I get the following message from the PIX debugging

  IPSec (validate_transform_proposal): proxy unsupported identities

  Anyone have this problem?

  Thank you

  Christian

  Check your crypto accesslist.

  http://www.Cisco.com/warp/public/110/L2TP-IPSec.html

  With certs, but shud give u an idea.

  THX

  AFAQ

• Portege 2000 cannot start after suspend

  Hi guru,.

  I'm new to this forum. So I looked through the first forum hoping to get an answer to my problem before posting, but no good result.

  Here's my problem. My portege 2000 works before brilliantly. But last night, while I was trying to configure my APM suspend (this is the first attempt to suspend), the problem, the system freezes! Then I tried to restart, can not remember I turn it off by pressing the button for a few seconds or unplug the hand because of the power key is not, in any case I have wait a few seconds after that, then turn on the power again, but the system seems to be dead, the AC power led is under voltage green LED, battery was not in the slot so no sign for her, the small button Fn LED told me this Fn key works well, but the caplock key does not work because its LED is not turn on after pressing, the screen is blank, or should say it is not powered on, the hard drive does not turn.

  So I unloaded the system by unplugging it from the main. After a while I swhitch on once again, the laptop is still in the same situation. Therefore, I tried to unload everything, disconnect the hand, open up the laptop, unplug the CMOS battery, wait for a while (15-20 minutes), then put it back on, but no joy.

  I did some research on Google at this time and read the knowledge base on the web site of Toshiba, seems the problem come with BIOS, who say that the system does not start if the power is off during suspend mode for the original version of BIOS (later healed). So, I decide to Flash a BIOS to most recent version. I have a pc card floppy drive, so I download the BIOS and create the floppy, then I use the key to update the BIOS to power on the laptop, luckily this time it works, "ready to update bios" screen appear. But when I press the key on the keyboard, it seems that it does not access the pc card floppy drive.

  By this incident, I think that the material has no problem, but the system is in standby for ever. Guru of the idea?

  Therefore, I have 2 questions:
  1. how to make it back to the start mode so that I can start my system? I need this as well according to the Readme of the BIOS update package, it should be in start mode, no interruption/recovery mode.
  2. how flashing a new bios in this situation? Do I need a USB floppy drive to do the BIOS to recognize that there is a drive so that I can Flash a new bios in there? Or the system will analyze not for material in this mode 'freezes '?

  Sorry about the long story, but I think I must tell him that you guys understand the situation and what I've tried so far.

  Additional information on my system, I'm under debian linux etch on this laptop, and everything that happened after I typed the command "apm-s". But it seems to me that it is the problem of BIOS problem OS?

  Thanks in advance.

  concerning
  Colin

  Hello

  First question: How did you install the operating system if the laptop will not start?

  I'm a bit confused Mr. I put t you know what means the boot mode.

  If the laptop has been completely stopped down so it s in the boot mode (standby or hibernation mode don t mix).
  If you want to update BIOS please make sure the BIOS is good and that you use the right update procedure.

  Where did you find the information that the BIOS update will solve this problem?
  In any case, for me, it looks more like an electrical problem on the motherboard.

• Windows 8 cannot start every morning, get the Blue error screen

  I installed windows 8 pro on my Lenovo ideapad laptop. Every morning I start my system, it won't start and I get a screen of recovery blue crash and then it restarts and then starts normally. What is happening every day. Please help me.

  I solved this problem. This was due to the lack of drivers for the hardware a bit on my system. I checked in Device Manager and install.

• Dell Dimension 8200 windows xp cannot start after the replacement of old CD drive by mounting drive DVD LG GDR-H30N

  Hello guys please help!

  I tried to mount the new drive & replacing the old CD player... the new player can work, but windows xp does not start... It's just a black screen...

  Please advice, thank you!

  Message edited by Don86 on 07/21/2008 04:41
  
  

• Photoshop CS2 on Windows 7, cannot start after installation

  Hi everyone, I really hope someone can help me with this!

  OK, I've always used Imageready CS2 to open avi files to edit and then save as animated GIF without affecting quality (what part of PS CS2 I paid for) on my old laptop with Windows XP in the past.

  So I upgrade to PS CS5 (paid) I have installed successfully on my new laptop with Windows 7, but until now, I am dismayed to find that I can't open avi in PS CS5 files just because I have 64 bit, not 32 bits even though I couldn't find the 32-bit program anywhere (apparently I found the 32 bit in searching in the Start button (, but it opens always as 64-bit?).

  So I thought I would try to install PS CS2 in Windows 7 using my CD and found that the activation part no longer works which led me to find that I could download a copy of PS CS2 without the bit of activation (yes I did uninstall it before installing PS CS2 without activation) everything was fine BUT... until I tried to start my laptop next time It wouldn't boot correctly at all, only to her for this boot Animation screen then black with the cursor in the middle or, rarely, in the log on screen is not working but that's all, so I had to do a system restore to get it in working order less the CS2 PS manage

  I thought it was the fault of the other things I've downloaded at same time as xvid codec decompressor (so I could use VeeDub64) so I downloaded the codeces from different sources and rebooted to see if it boots ok (it did) then I tried to install PS CS2 again but same thing happened during the reboot - fail to start and I had to do some system restores (as some points did not ) until I'm hardly it is in working order once again...

  I see that some people have PS CS2 which works perfectly on Windows 7 with 64 bit because they have changed the path of the file during the installation of the program? Or I must have the 32-bit program somewhere that maybe I don't have it because my PS CS5 does not extend? Or the other of these works would be? To be honest, I'm quite reluctant to try as I can kill my laptop this time and it is only about 2 years!

  Any help would be appreciated!

  That's the good news about the CS2. I don't know what was the hiccups.

  If you still want CS5 32-bit, you can try an uninstall/clean/reinstall. If you are asked a CS2 (qualification s/n) I guess that your old serial number CS2 would do.

  If this isn't the case, you will need to call Adobe and use the code challenge system to install CS5.

  First address cleaning tool: use the CC cleaning tool to solve the installation problems | CC, CS3 - CS6

  Challenge code: apparently, Adobe has a challenge code system.  So, if you have the old serial number of the upgrade and you call customer service.  The customer support has a challenge code procedure where they give you a code that overrides the problem.

  Hmm... can not do it on a weekend when closing the customer.

• Windows 8 | Cannot start windows after the mode "Eve" [Mobile]

  Separated from this thread.

  Hello

  I have the same problem. I put my laptop (windows 8) to sleep and after a few hours when I tried to open it, it was just a white screen. I tried everything you mentioned (windows + w, windows + x, windows + r), but all in vain. Only thing that responds is increase/decrease brightness and volume. Help, please. Also when I try to stop him, he falls asleep.

  Hello

  Thanks for posting the query on Microsoft Community. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

  Update you the drivers for graphics cards?

  If you have not updated the graphic card drivers, then I suggest you to update the drivers of graphics card on the manufacturers website and see if that helps.

  Troubleshoot video card
  http://Windows.Microsoft.com/en-AU/Windows-8/find-install-display-drivers

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Cannot start Windows Journal or Tablet PC Input Panel

  Suddenly, I get the following message appears when you try to start Windows Journal on my Tablet PC:

  "Windows Journal cannot start. There was an error initializing inking components.  If this problem persists... »

  In addition, input panel Tablet PC version 1.7.2600.5512 brings is more a place to write

  Suddenly, I get the following message appears when you try to start Windows Journal on my Tablet PC:

  "Windows Journal cannot start. There was an error initializing inking components.  If this problem persists... »

  In addition, input panel Tablet PC version 1.7.2600.5512 brings is more a place to write

  After extensive Google/Binging I finally jumped on my solution. I have Windows 7 Ultimate and Office Professional 2010. I tried different solutions online without success:

  • Reset
  • Fix Office 2010 (no, I didn't uninstall and reinstall)
  • SFC/scannow (no problem found)
  • The "delete and then add Tablet PC components" in Control Panel programs and features/turn on Windows features
  • Close all browsers (without success)

  Then it dawned on me that OneNote is a design feature. I figured that this was linked to components of Tablet PC inking, as my research has shown people also had problems with Windows Journal. I also had problems with Windows Journal, stating the issue of inking of the components. In OneNote, I went to the drawing Ribbon and tried to shoot when a popup said that I didn't have the Tablet PC features installed (even if I checked that). and offered to install it (Yes!). Curiously, he asked for the DVD for FrontPage 2003, I also installed. Who could guess, but it was my solution. I hope this helps someone.

• Cannot start BITS (Background Intelligent Transfer)

  On my installation of Windows 8 relatively new applications running in the modern UI suddenly have no Internet access. Internet works for applications that run from the desktop. So I ran the corner store convenience store apps and Windows account. These seem to get stuck when you try to start BITS (Background Intelligent Transfer). Therefore, I tried to start this service manually, then get the 2147023828 error message, indicating that he has an addiction problem. I checked dependencies that are documented in the BITS service properties and they all work.

  This has bad consequences, for example Windows Update cannot start. So, are there clues?

  This same problem and error code.  Turns out that the Windows event logger has been disabled.  As soon as I enabled and started, BITS came immediately.

• Cannot install Windows 2000 on SatPro 4600

  Hello

  I have a SatPro 4600, earlier, I got ACPI Bios error when you try to start Windows.

  Is it possible to disable ACPI in the Bios, I couldn't find any option in ACPI Bios 2.60 to turn it off.

  The I formatted the hard drive and try to install Windows 2000 from scratch. But for Setup is copying files to start the installation program, it comes up with an error message.
  "Setup cannot copy the file"File_name"

  And will not let me continue with the Setup program.

  Help, please.

  Hello

  I can't help you much about it, but maybe this article can help you. Check http://support.microsoft.com/kb/319344/en-us

  Good luck!

• Cannot install Windows 2000 on my Satellite 1800-514

  I am trying to install windows on my Satellite 1800-514. but when Setup tries to copy files to the hard drive I have some errors on some files are not copied correctly (it says it can't find them, I checked well and they are on the cd).

  is not always, but often the same files. jump results in an unnecessary installation (cannot start). It is the first time ever I am trying to format and reinstall windows on this laptop. I tried gentoo (linux) for a few days and it seems to work very well (except it's me mistakes sometimes when starting from cd)

  so far I have tried:
  -Another cd (all seem to give me the same problem, they worked on all the others I've used them on front of the pc...)
  -windows XP pro cd, gave me an error of not being able to load a file (looks like the installation of 2000?)
  -have you memtest86 to check memory, he finds no errors, also I tried to install with just 1 of my 2-bands memory, that has not helped either. so I don't think that memory is the problem.
  -do you have a chkdsk /R from the recovery console to check the hard disk for errors, no have been found...

  I'm naïve, what to do/try then?

  Hello

  Reset you HARD drive after using the Linux operating system? If please do it properly and then try to install Windows using the recovery CD.

  If the error again please contact the Service partner. In my opinion there must be a missing file.