volume limit

Hello

How to remove the volume limit?

Please consider that this option does not exist?

Best regards

First of all, do not set the region to Europe, even if you do not live in Europe. Then under settings, system volume set to high. If europe is chosen as the region, then you get no choice at the top. In the menu,

see if you can find the reset settings. If that will leave you not reset the region, then download the latest firmware and install it manually on the player. After that, you should be able to set the region. I guess the rest of the world for the region to choose? If you choose the United States in the region, then I think that the FM tuner is not working properly.

Tags: SanDisk Sansa

Similar Questions

  • Toshiba 32W2300A: how to set a maximum volume limit

    I have a 32W2300A bought for a bedroom TV and wish to limit the Maximum Volume.

    The specifications for this TV says it has Mode hotel where I assume that this is possible, but I can't find anywhere in the menu to enter this mode.

    I looked on the internet and some suggest that a remote Service is necessary.
    I hope this isn't the case, because nothing is mentioned in the manual.

    Can someone help please.

    Indeed, the user manual says nothing about the available hotel Mode.

    But I found the option called location and here you can switch between the home and the store.

    I guess that's the mode which limit access to different settings.

  • Is there a way to limit the volume and not only for music?

    Hello

    I have a child who loves the max volume. However, it is not only bad for his ears, he pushes the rest of the family crazy.

    As much as I saw him, he has no control master volume where you can limit the volume - that it JUST for music, leaving the rest of us stranded.

    I tried mental health of volume app, but since it's an app, it can be disabled without a password and so my child understood how close. So that one does not work.

    Anyone know of another way to limit the amount of EVERYTHING?

    Hi Makkapakka777,

    I understand that you like to limit the volume on your iPad so that it cannot be increased beyond a certain point. Fortunately Restrictions allows you to set a volume limit that requires an access code to remove. The article below the link provides more information about the configuration and use of the Restrictions.

    Restrictions of use on your iPhone, iPad and iPod touch
    https://support.Apple.com/en-us/HT201304

    Kind regards!

  • How can I increase the volume on my iPad?

    The volume of my iPad was higher. Now I can barely hear a video. I tried to increase in the sounds to the max, but it is still low.

    Check the settings > general > Restrictions > allow changes > Volume limit.

  • iPod nano 7th gen locking the volume does not.

    I set the volume limit lock, but it does not work, I can always change the volume manually even if I locked the volume limit.  How to overcome this problem?  I really need to set limit volume for my daughter.

    I can always change the volume manually

    The setting of the limit is the maximum volume.  You can always change the volume manually.

  • No sound when using a headset? 7 7 iPhone

    I've recently set to upgrade to an iPhone 7 latest updates installed and have clearly wonderful audio using speaker phones, but as soon as the headphones are plugged, theres little or nothing then vanish its pointless. The headphone volume is at full throttle and phone recognizes they are there, and today he said could be a problem in my iTunes account - where are the settings in iTunes to study and does anyone know a way to fix the inaudible? Help greatly appreciated!

    Hello and welcome to Apple support communities, Iarns82.

    If I understand your message to the right, when you use headphones with your new iPhone 7, there is no sound or the sound is very low. I use headphones with my own iPhone almost everyday, so I can certainly understand how it is important to get the best possible sound for the steps. I'm very happy to help you with this.

    The first thing that I recommend you do is try the sound with another pair of headphones. This will help determine if there is a problem with your headphones, or if the problem is with the iPhone itself. If the same sound problem occurs with a second pair of headphones, let's check some settings of your phone:

    1. Open your application settings.
    2. Select music.
    3. Enable the control of sound. When activated, your iPhone will detect when you play naturally music has low volumes and he will adjust accordingly.
    4. Check if the Volume limit is on. If this is the case, drag completely to the right to turn it off.

    Then, test your sound using your headset. If the problem persists, follow the steps If your headphones do not work with your iPhone, iPad, or iPod touch, specifically, this section:

    Look for debris, damage or loose connections

    1. Look for debris in making headphones for your iPhone, iPad or iPod touch.
    2. Check your cable to earphone, connector, remote control and headphones for the damage such as wear or breakage.
    3. Search for debris on STS on each earpiece. To remove debris, gently brush all openings with a small brush bristle that is clean and dry.
    4. Firmly plug your headphones in. If your iOS device has a case, remove the case to get a good contact.

    After you have gone through these steps, test again your helmet.

    Thank you for using communities of Apple Support.

    Take care.

  • Audio iPhone 7 and high resolution

    Hi-

    Thinking of buying iPhone 7.  I notice that the DAC is now external to the phone for headphones cable good lightning and even lightning to the 3.5 mm adapter contains a small DAC inside.

    What this means that iPhone 7 accepts high resolution audio files? (I'm talking about 24 bits, files of 192,000 kHz with flow rates up to about 9 216 kbps, like the ones you can buy Pono music or other titles HD).

    The Apple store now sells items such as the helmet Planar Audeze with high quality converters.

    Has anyone tried this yet?  It may convince me to upgrade my iPhone 6.  (I currently use one of those Toblerone shaped players Pono for hi res music).

    Hi there, Phlac!

    Thank you for joining the communities Support from Apple! It's a big question about the audio formats supported by iPhone 7. See this link which has the Technical Specifications for iPhone 7.

    Audio playback

    • Audio formats supported: AAC (8 to 320 Kbps), AAC protected (from iTunes Store), HE - AAC, MP3 (8 to 320 Kbps), MP3 VBR, Dolby Digital (AC-3), Dolby Digital Plus (E-AC-3), Audible (formats 2, 3, 4, Audible Enhanced Audio, AAX, and AAX +), Apple Lossless, AIFF, and WAV
    • The user configurable maximum volume limit

    Any audio that works perfectly with the iPhone 7 falls in these formats! Have a great day!

  • No sound from my Nano Gen 7

    Have had my 7th Gen for a few years. Used only a few times at home, not in the dust. It is in a case of dust all this time. It had sat unused, battery exhausted for about 2 years. Today, that I firstly, charged battery. Then it turned on, went to the music listening and no sound.

    Everything else works. All the function, settings, podcasts, clock, I had to reset but now works. Its all just not making helmets, I guess.

    I reset, several times restored via iTunes on my PC. Both devices are running the current software. The volume control works on screen, volume limit is not, I bought several songs today, others were purchased when I arrived at the unit. The last time that I used it, its worked. Tried 3 different ear pods, no sound of Nano, but the sound of the iPhone.

    I followed all the troubleshooting topics in the User Guide. I hope that someone here is smarter that the guide or knows a trick.

    Thank you!

    Hello Mswilma,

    Thank you for using communities of Apple Support. I understand, there no sound when you use headphones with your iPod nano. I definitely want to make sure that you are able to enjoy your music without problem. You did a great job trying to get this resolved so far. At this point the iPod will need to be repaired. The link below provides information about service, warranty and price options in your area:

    the Service response to iPod

    Have a wonderful day!

  • My headphones are too loud

    I just bought a pair of headphones Bluetooth NCREDIBLE1 of RadioShack this afternoon.  When I tried to get out them, I found them to be LOUD.  As in, the lowest volume setting is a little stronger than is comfortable (for me, anyway).  It is only on the Bluetooth setting, however, because when I turned off the bluetooth part and they just plugged my iPhone using the included cable, the volume was like any other pair.  I tried to use the option "volume limit" on the iPhone itself, but it turns out that the headphones have their OWN volume which is entirely separate from the normal volume of the iPhone, and which activates when they are connected!  It's more infuriating, as it is unnecessary to own headphones if I plug them in to use.  I use an iPhone 5, IOS 9.3.2,and 64 GB.

    Hello!

    So it seams to be quite a problem for you. I would recommend either by calling tech for the manufacture of support simply asking a fix or a replacement, or turning them and get another pair of headphones

  • Headphones MDR - Nc6 listen to noise

    Hey everybody,

    I would like to send this message directly to Sony. I bought these headphones of your not so long ago, and not sooner than later, one side does not work. Now I don't blare the volume, so I usually wait headphones/headset to last me a decent amount of time.

    I opened the side that wasn't working, and I found a very avoidable error. The two wires that connected to the real speaker have been merged when I took a peek. I had to apply a decent amount of force to get them out, leading me to believe that they were firmly melted on the other. I guess that this caused a short circuit and that's why she damaged the Platinum that I don't know how to fix.

    * Side note, these two sons had MANY showing bare, which leads to a few options for reduction of the volume limit, or find a more durable coating material.*

    I'm upset that this defective design. I feel like an EA, not enough emphasis is placed on quality. Yes to build the circuit and make it compatible with the appearance of noise can be a decent challenge (maybe not so much with PSPICE), but the quality of the product could be improved.

    These headphones have been enormous, until this incident. I really hope that your company focuses on fixing small errors like these and greatly improve the quality of the product. I am generally satisfied with products Sony and their quality, with the exception of this defective product.
    Sincerely,
    Disappointed customer

    I couldn't agree with you more. I'm not at SONY, I'm just another disappointed customer.

    But at a certain point, one, sooner or later, as a consumer, we must begin to discover where these products are from and under what circumstances they are done and why are relatively expensive. I have no doubt that Sony engineers are very intelligent, but even if the design of the headphones is impeccable, its production could not.

    Please take a look at the label and what countries are doing in the headphones. Made in China? Made in Malasia? Made in Indonesia? Made in the Mexico?

    Facts to start learning and important words are:
    -Maquiladoras (http://geography.about.com/od/urbanecon... adoras.htm)
    -Sweatshops(http://www.youtube.com/watch?v=xVuScVCF1Ws)
    -Duty free area (landscape http://infranetlab.org/blog/2010/05/bor... /)
    -Globalization (http://home.clara.net/heureka/gaia/global02.htm)
    -Corporation (http://www.youtube.com/watch?v=Pin8fbdGV9Y)

    And the always recommended "Story of Stuff" to round up:
    http://www.YouTube.com/watch?v=9GorqroigqM

    So poor manufacturing is a more complex phenomenon.

  • Strangeness of IPsec

    Hello guys,.

    I just set up an IPsec Site to Site VPN on the following topology in GNS3:

    All configs are OK on both routers and ping test show that the VPN tunnel works correctly.

    My question would be, why routers use policies automatic configuration of the phase 1 (with 2 on two priority routers) instead of using the default (priority 1)?

    If I'm right, lower priority values have a higher precedence here.

    R1 #sh crypto isakmp policy

    World IKE policy
    Priority protection Suite 2
    encryption algorithm: AES - Advanced Encryption Standard (128-bit keys).
    hash algorithm: Secure Hash Standard
    authentication method: pre-shared Key
    Diffie-Hellman group: #2 (1024 bits)
    life expectancy: 600 seconds, no volume limit

    Default protection suite
    encryption algorithm: - Data Encryption STANDARD (56-bit keys).
    hash algorithm: Secure Hash Standard
    authentication method: Rivest-Shamir-Adleman Signature
    Diffie-Hellman group: #1 (768 bits)
    lifetime: 86400 seconds, no volume limit

    As I said, the traffic of users use Phase2 appropriate two-way tunnels:

    R1 #show crypto engine connections active

    Algorithm of address State IP Interface ID encrypt decrypt
    2001 Serial0/0 23.0.0.1 defined AES256 + 0 48 SHA
    2002 Serial0/0 23.0.0.1 defined AES256 + SHA 49 0

    You have an idea?

    Thanks in advance!

    The policy with the highest priority is with the number down the police. All of your configured strategies have a higher priority (and fewer) then the default policy.

  • GRE tunnels will not come on VPN IPsec/GRE

    Hi all

    We have 400 + remote sites that connect to our central location (and a backup site) using Cisco routers with vpn IPSec/GRE tunnels.  We use a basic model for the creation of tunnels, so there is very little chance of a bad configuration on each router.  Remote sites use Cisco 831 s, central sites use Cisco 2821 s.  There is a site where the tunnels WILL refuse just to come.

    Routers are able to ping their public IP addresses, so it is not a routing problem, but gre endpoints cannot ping.  There is no NATing involved, two routers directly accessing the Internet.  The assorded display orders seem to indicate that the SAs are properly built, but newspapers, it seems that last part just don't is finished, and the GRE tunnels come not only upward.

    The attached log file, it seems that both its IPSEC & ISAKMP are created @ 00:25:14, then QM_PHASE2 end @ 00:25:15.

    00:25:15: ISAKMP: (0:10:HW:2): node error 1891573546 FALSE reason for deletion "(wait) QM.
    00:25:15: ISAKMP: (0:10:HW:2): entrance, node 1891573546 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
    00:25:15: ISAKMP: (0:10:HW:2): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
    00:25:15: ISAKMP (0:268435467): received 208.XX packet. Dport 500 sport Global 500 (I) QM_IDLE yy.11
       
    00:25:15: IPSEC (key_engine): had an event of the queue with 1 kei messages
    00:25:15: IPSEC (key_engine_enable_outbound): rec would prevent ISAKMP
    00:25:15: IPSEC (key_engine_enable_outbound): select SA with spinnaker 1572231461/50
    00:25:15: ISAKMP: (0:11:HW:2): error in node-1931380074 FALSE reason for deletion "(wait) QM.
    00:25:15: ISAKMP: (0:11:HW:2): entrance, node-1931380074 = IKE_MESG_FROM_PEER, IKE_QM_EXCH
    00:25:15: ISAKMP: (0:11:HW:2): former State = new State IKE_QM_R_QM2 = IKE_QM_PHASE2_COMPLETE
    00:25:15: IPSEC (key_engine): had an event of the queue with 1 kei messages
    00:25:15: IPSEC (key_engine_enable_outbound): rec would prevent ISAKMP
    00:25:15: IPSEC (key_engine_enable_outbound): select SA with spinnaker 310818168/50

    I don't have the remote router log file, and is very long, so I joined her.  Before that I captured the log file, I enabled debugging ipsec & isakmp and immediately authorized the SAs.

    Assorted useful details and matching orders of show results:

    Cisco IOS Software, C831 (C831-K9O3SY6-M), Version 12.4 (25), RELEASE SOFTWARE (fc1)

    There are 2 connections of IPSEC/GRE tunnel:

    Tunnel101: KC (208.YY. ZZ.11) - remote control (74.WW. XX.35)
    Tunnel201: Dallas (208.XX. YY.11) - remote control (74.WW. XX.35)

    Site-382-831 #sho ip int br
    Interface IP-Address OK? Method State Protocol
    FastEthernet1 unassigned YES unset down down
    FastEthernet2 unassigned YES unset upward, upward
    FastEthernet3 unassigned YES unset upward, upward
    FastEthernet4 unassigned YES unset upward, upward
    Ethernet0 10.3.82.10 YES NVRAM up up
    Ethernet1 74.WW. XX.35 YES NVRAM up up
    Ethernet2 172.16.1.10 YES NVRAM up up
    Tunnel101 1.3.82.46 YES NVRAM up toward the bottom<>
    Tunnel201 1.3.82.62 YES NVRAM up toward the bottom<====  ="">
    NVI0 unassigned don't unset upward upwards

    Site-382-831 #.
    Site-382-831 #sho run int tunnel101
    Building configuration...

    Current configuration: 277 bytes
    !
    interface Tunnel101
    Description % connected to the 2nd KC BGP 2821 - PRI - B
    IP 1.3.82.46 255.255.255.252
    IP mtu 1500
    IP virtual-reassembly
    IP tcp adjust-mss 1360
    KeepAlive 3 3
    source of tunnel Ethernet1
    destination of the 208.YY tunnel. ZZ.11
    end

    Site-382-831 #.

    Site-382-831 #show isakmp crypto his
    status of DST CBC State conn-id slot
    208.XX. YY.11 74.WW. XX.35 QM_IDLE ASSETS 0 11
    208.YY. ZZ.11 74.WW. XX.35 QM_IDLE 10 0 ACTIVE
    Site-382-831 #.

    Site-382-831 #.
    Site-382-831 #show detail of the crypto isakmp
    Code: C - IKE configuration mode, D - Dead Peer Detection
    NAT-traversal - KeepAlive, N - K
    X - IKE extended authentication
    PSK - GIPR pre-shared key - RSA signature
    renc - RSA encryption

    C - id Local Remote I have VRF status BA hash Auth DH lifetime limit.
    11 74.WW. XX.35 208.XX. YY.11 ACTIVE 3des sha psk 1 23:56:09
    Connection-id: motor-id = 11:2 (hardware)
    74.WW 10. XX.35 208.YY. ZZ.11 ACTIVE 3des sha psk 1 23:56:09
    Connection-id: motor-id = 10:2 (hardware)
    Site-382-831 #.

    Site-382-831 #.
    Site-382-831 #show crypto ipsec his

    Interface: Ethernet1
    Tag crypto map: IPVPN_MAP, local addr 74.WW. XX.35

    protégé of the vrf: (none)
    ident (addr, mask, prot, port) local: (74.WW. XX.35/255.255.255.255/47/0)
    Remote ident (addr, mask, prot, port): (208.YY. ZZ.11/255.255.255.255/47/0)
    current_peer 208.YY. ZZ.11 port 500
    LICENCE, flags is {origin_is_acl},
    #pkts program: 2333, #pkts encrypt: 2333, #pkts digest: 2333
    #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
    compressed #pkts: 0, unzipped #pkts: 0
    #pkts uncompressed: 0, #pkts compr. has failed: 0
    #pkts not unpacked: 0, #pkts decompress failed: 0
    #send 21, #recv errors 0

    local crypto endpt. : 74.WW. XX.35, remote Start crypto. : 208.YY. ZZ.11
    Path mtu 1500, mtu 1500 ip, ip mtu IDB Ethernet1
    current outbound SPI: 0x45047D1D (1157922077)

    SAS of the esp on arrival:
    SPI: 0x15B97AEA (364477162)
    transform: esp-3des esp-sha-hmac.
    running parameters = {Tunnel}
    Conn ID: 2004, flow_id: C83X_MBRD:4, crypto card: IPVPN_MAP
    calendar of his: service life remaining (k/s) key: (4486831/1056)
    Size IV: 8 bytes
    support for replay detection: Y
    Status: ACTIVE

    the arrival ah sas:

    SAS of the CFP on arrival:

    outgoing esp sas:
    SPI: 0x45047D1D (1157922077)
    transform: esp-3des esp-sha-hmac.
    running parameters = {Tunnel}
    Conn ID: 2003, flow_id: C83X_MBRD:3, crypto card: IPVPN_MAP
    calendar of his: service life remaining (k/s) key: (4486744/1056)
    Size IV: 8 bytes
    support for replay detection: Y
    Status: ACTIVE

    outgoing ah sas:

    outgoing CFP sas:

    protégé of the vrf: (none)
    ident (addr, mask, prot, port) local: (74.WW. XX.35/255.255.255.255/47/0)
    Remote ident (addr, mask, prot, port): (208.XX. YY.11/255.255.255.255/47/0)
    current_peer 208.XX. YY.11 port 500
    LICENCE, flags is {origin_is_acl},
    #pkts program: 2333, #pkts encrypt: 2333, #pkts digest: 2333
    #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
    compressed #pkts: 0, unzipped #pkts: 0
    #pkts uncompressed: 0, #pkts compr. has failed: 0
    #pkts not unpacked: 0, #pkts decompress failed: 0
    #send 21, #recv errors 0

    local crypto endpt. : 74.WW. XX.35, remote Start crypto. : 208.XX. YY.11
    Path mtu 1500, mtu 1500 ip, ip mtu IDB Ethernet1
    current outbound SPI: 0xE82A86BC (3895101116)

    SAS of the esp on arrival:
    SPI: 0x539697CA (1402378186)
    transform: esp-3des esp-sha-hmac.
    running parameters = {Tunnel}
    Conn ID: 2008, flow_id: C83X_MBRD:8, crypto card: IPVPN_MAP
    calendar of his: service life remaining (k/s) key: (4432595/1039)
    Size IV: 8 bytes
    support for replay detection: Y
    Status: ACTIVE

    the arrival ah sas:

    SAS of the CFP on arrival:

    outgoing esp sas:
    SPI: 0xE82A86BC (3895101116)
    transform: esp-3des esp-sha-hmac.
    running parameters = {Tunnel}
    Conn ID: 2001, flow_id: C83X_MBRD:1, crypto card: IPVPN_MAP
    calendar of his: service life remaining (k/s) key: (4432508/1039)
    Size IV: 8 bytes
    support for replay detection: Y
    Status: ACTIVE

    outgoing ah sas:

    outgoing CFP sas:
    Site-382-831 #.

    Site-382-831 #.
    Site-382-831 #show crypto ipsec his | Pkts Inc. | life
    #pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
    #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
    compressed #pkts: 0, unzipped #pkts: 0
    #pkts uncompressed: 0, #pkts compr. has failed: 0
    #pkts not unpacked: 0, #pkts decompress failed: 0
    calendar of his: service life remaining (k/s) key: (4486831/862)
    calendar of his: service life remaining (k/s) key: (4486738/862)
    #pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
    #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
    compressed #pkts: 0, unzipped #pkts: 0
    #pkts uncompressed: 0, #pkts compr. has failed: 0
    #pkts not unpacked: 0, #pkts decompress failed: 0
    calendar of his: service life remaining (k/s) key: (4432595/846)
    calendar of his: service life remaining (k/s) key: (4432501/846)
    Site-382-831 #.

    Site-382-831 #.
    Site-382-831 #show crypto isakmp policy

    World IKE policy
    Priority protection Suite 10
    encryption algorithm: three key triple a
    hash algorithm: Secure Hash Standard
    authentication method: pre-shared Key
    Diffie-Hellman group: #1 (768 bits)
    lifetime: 86400 seconds, no volume limit
    Default protection suite
    encryption algorithm: - Data Encryption STANDARD (56-bit keys).
    hash algorithm: Secure Hash Standard
    authentication method: Rivest-Shamir-Adleman Signature
    Diffie-Hellman group: #1 (768 bits)
    lifetime: 86400 seconds, no volume limit
    Site-382-831 #.

    Site-382-831 #show crypto card
    "IPVPN_MAP" 101-isakmp ipsec crypto map
    Description: at the 2nd KC BGP 2821 - PRI - B
    Peer = 208.YY. ZZ.11
    Extend the PRI - B IP access list
    access list PRI - B allowed will host 74.WW. XX.35 the host 208.YY. ZZ.11
    Current counterpart: 208.YY. ZZ.11
    Life safety association: 4608000 Kbytes / 3600 seconds
    PFS (Y/N): N
    Transform sets = {}
    IPVPN,
    }

    "IPVPN_MAP" 201-isakmp ipsec crypto map
    Description: 2nd Dallas BGP 2821 - s-B
    Peer = 208.XX. YY.11
    Expand the list of IP SEC-B access
    s - B allowed will host 74.WW access list. XX.35 the host 208.XX. YY.11
    Current counterpart: 208.XX. YY.11
    Life safety association: 4608000 Kbytes / 3600 seconds
    PFS (Y/N): N
    Transform sets = {}
    IPVPN,
    }
    Interfaces using crypto card IPVPN_MAP:
    Ethernet1
    Site-382-831 #.

    Tunnel between KC & the remote site configuration is:

    Distance c831 - KC

    crypto ISAKMP policy 10
    BA 3des
    preshared authentication
    !
    PRI-B-382 address 208.YY isakmp encryption key. ZZ.11
    !
    Crypto ipsec transform-set esp-3des esp-sha-hmac IPVPN
    transport mode
    !
    IPVPN_MAP 101 ipsec-isakmp crypto map
    Description of 2nd KC BGP 2821 - PRI - B
    set of peer 208.YY. ZZ.11
    game of transformation-IPVPN
    match address PRI - B
    !
    interface Tunnel101
    Description % connected to the 2nd KC BGP 2821 - PRI - B
    IP 1.3.82.46 255.255.255.252
    IP mtu 1500
    KeepAlive 3 3
    IP virtual-reassembly
    IP tcp adjust-mss 1360
    source of tunnel Ethernet1
    destination of the 208.YY tunnel. ZZ.11
    !
    interface Ethernet0
    private network Description
    IP 10.3.82.10 255.255.255.0
    IP mtu 1500
    no downtime
    !
    interface Ethernet1
    IP 74.WW. XX.35 255.255.255.248
    IP mtu 1500
    automatic duplex
    IP virtual-reassembly
    card crypto IPVPN_MAP
    no downtime
    !
    PRI - B extended IP access list
    allow accord 74.WW the host. XX.35 the host 208.YY. ZZ.11
    !

    KC-2821 *.

    PRI-B-382 address 74.WW isakmp encryption key. XX.35
    !
    PRI-B-382 extended IP access list
    allow accord 208.YY the host. ZZ.11 the host 74.WW. XX.35
    !
    IPVPN_MAP 382 ipsec-isakmp crypto map
    Description % connected to the 2nd KC BGP 2821
    set of peer 74.WW. XX.35
    game of transformation-IPVPN
    match address PRI-B-382
    !
    interface Tunnel382
    Description %.
    IP 1.3.82.45 255.255.255.252
    KeepAlive 3 3
    IP virtual-reassembly
    IP tcp adjust-mss 1360
    IP 1400 MTU
    delay of 40000
    tunnel of 208.YY origin. ZZ.11
    destination of the 74.WW tunnel. XX.35
    !
    end

    Any help would be much appreciated!

    Mark

    Hello

    logs on Site-382-831, only see the crypt but none decrypts, could you check a corresponding entry on the peer and see if has any questions send return traffic?

    Site-382-831 #show crypto ipsec his | Pkts Inc. | life
    #pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
    #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
    compressed #pkts: 0, unzipped #pkts: 0
    #pkts uncompressed: 0, #pkts compr. has failed: 0
    #pkts not unpacked: 0, #pkts decompress failed: 0
    calendar of his: service life remaining (k/s) key: (4486831/862)
    calendar of his: service life remaining (k/s) key: (4486738/862)
    #pkts program: 2397, #pkts encrypt: 2397, #pkts digest: 2397
    #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
    compressed #pkts: 0, unzipped #pkts: 0
    #pkts uncompressed: 0, #pkts compr. has failed: 0
    #pkts not unpacked: 0, #pkts decompress failed: 0
    calendar of his: service life remaining (k/s) key: (4432595/846)
    calendar of his: service life remaining (k/s) key: (4432501/846)
    Site-382-831 #.

    Kind regards

    Averroès.

  • Creation of VPN Tunnel / no connection is established

    Hello

    It's my first post on the Forums of Cisco, I hope you can help me with my problem. I'm trying to connecto to the network using a VPN from Site to Site connection using a router Cisco 1841 and Cisco PIX 515E. But for some reason, I couldn't connect the devices using a VPN configuration. Below I will list the device information of each:

    PIX

    Material: PIX-515E, 64 MB RAM, Pentium II 433 MHz processor
    Flash E28F128J3 @ 0xfff00000, 16 MB
    BIOS Flash AM29F400B @ 0xfffd8000, 32 KB

    0: Ext: Ethernet0: the address is 0017.9514.5a3c, irq 10
    1: Ext: Ethernet1: the address is 0017.9514.5a3d, irq 11
    2: Ext: Ethernet2: the address is 000e.0caa.eaa0, irq 11

    The devices allowed for this platform:
    The maximum physical Interfaces: 3
    VLAN maximum: 10
    Internal hosts: unlimited
    Failover: disabled
    VPN - A: enabled
    VPN-3DES-AES: disabled
    Cut - through Proxy: enabled
    Guardians: enabled
    URL filtering: enabled
    Security contexts: 0
    GTP/GPRS: disabled
    VPN peers: unlimited

    This platform includes a restricted license (R).

    Router

    Cisco 1841 (revision 7.0) with 116736 14336 K/K bytes of memory.
    Card processor ID FTX1137W00L
    2 FastEthernet interfaces
    1 Serial interface (sync/async)
    1 module of virtual private network (VPN)
    Configuration of DRAM is 64 bits wide with disabled parity.
    191K bytes of NVRAM memory.
    31360K bytes of ATA CompactFlash (read/write)

    Here is the configuration of the router

    'VPN_TO_PIX' 10-isakmp ipsec crypto map
    By the peers = A.A.A.A
    Expand the IP 110 access list
    access-list 110 permit ip 192.168.2.0 0.0.0.255 10.10.0.0 0.0.0.255
    Current counterpart: A.A.A.A
    Life safety association: 4608000 Kbytes / 3600 seconds
    PFS (Y/N): N
    Transform sets = {}
    PIX_CRYPTSET,
    }
    Interfaces using crypto card VPN_TO_PIX:
    FastEthernet0/0

    World IKE policy
    Priority protection Suite 10
    encryption algorithm: - Data Encryption STANDARD (56-bit keys).
    hash algorithm: Secure Hash Standard
    authentication method: pre-shared Key
    Diffie-Hellman group: #1 (768 bits)
    lifetime: 86400 seconds, no volume limit
    Default protection suite
    encryption algorithm: - Data Encryption STANDARD (56-bit keys).
    hash algorithm: Secure Hash Standard
    authentication method: Rivest-Shamir-Adleman Signature
    Diffie-Hellman group: #1 (768 bits)
    lifetime: 86400 seconds, no volume limit

    crypto ISAKMP policy 10
    preshared authentication
    ISAKMP crypto key PIX_VPN_2010 address A.A.A.A

    Crypto ipsec transform-set esp - esp-sha-hmac PIX_CRYPTSET
    !
    VPN_TO_PIX 10 ipsec-isakmp crypto map
    defined by peer A.A.A.A
    game of transformation-PIX_CRYPTSET
    match address 110

    Configuration of the PIX

    NAT (inside) 8 access-list VPN_TUNNEL

    VPN_TUNNEL to access extended list ip 10.10.0.0 allow 255.255.255.0 192.168.2.0 255.255.255.0

    Crypto ipsec transform-set esp - esp-sha-hmac PIX_CRYPTSET
    Crypto dynamic-map PIX_CRYPTSET_PIX 1 game of transformation-PIX_CRYPTSET
    card crypto VPN_TUNNEL_MAP 20 set peer B.B.B.B
    crypto VPN_TUNNEL_MAP 20 the transform-set PIX_CRYPTSET value card
    card crypto VPN_TUNNEL_MAP 30-isakmp dynamic ipsec PIX_CRYPTSET_PIX
    VPN_TUNNEL_MAP interface card crypto outside
    crypto isakmp identity address
    crypto ISAKMP allow outside
    crypto ISAKMP policy 1
    preshared authentication
    the Encryption
    md5 hash
    Group 2
    life 86400
    crypto ISAKMP policy 30
    preshared authentication
    the Encryption
    sha hash
    Group 2

    life 86400

    After you run the status of devices and this is the results:

    PIX

    SH crypto ipsec stat

    IPsec statistics
    -----------------------
    The active tunnels: 0
    Previous tunnels: 0
    Incoming traffic
    Bytes: 0
    Decompressed bytes: 0
    Package: 0
    Packet ignored: 0
    Review of failures: 0
    Authentications: 0
    Authentication failures: 0
    Decryptions: 0
    Decryption failures: 0
    Fragments of decapsules who need reassembly: 0
    Outgoing
    Bytes: 0
    Uncompressed bytes: 0
    Package: 0
    Packet ignored: 0
    Authentications: 0
    Authentication failures: 0
    Encryption: 0
    Encryption failures: 0
    Success of fragmentation: 0
    Fragmentation before successses: 0
    After fragmentation success stories: 0
    Fragmentation failures: 0
    Prior fragmentation failures: 0
    Fragmentation failures after: 0
    Fragments created: 0
    PMTUs sent: 0
    PMTUs rcvd: 0
    Protocol of failures: 0
    Missing chess SA: 0
    System capacity: 0

    SH crypto ipsec stat

    IPsec statistics
    -----------------------
    The active tunnels: 0
    Previous tunnels: 0
    Incoming traffic
    Bytes: 0
    Decompressed bytes: 0
    Package: 0
    Packet ignored: 0
    Review of failures: 0
    Authentications: 0
    Authentication failures: 0
    Decryptions: 0
    Decryption failures: 0
    Fragments of decapsules who need reassembly: 0
    Outgoing
    Bytes: 0
    Uncompressed bytes: 0
    Package: 0
    Packet ignored: 0
    Authentications: 0
    Authentication failures: 0
    Encryption: 0
    Encryption failures: 0
    Success of fragmentation: 0
    Fragmentation before successses: 0
    After fragmentation success stories: 0
    Fragmentation failures: 0
    Prior fragmentation failures: 0
    Fragmentation failures after: 0
    Fragments created: 0
    PMTUs sent: 0
    PMTUs rcvd: 0
    Protocol of failures: 0
    Missing chess SA: 0
    System capacity: 0

    Router

    Current state of the session crypto

    Interface: FastEthernet0/0
    The session state: down
    Peer: Port A.A.A.A 500
    FLOW IPSEC: allowed ip 192.168.2.0/255.255.255.0 10.10.0.0/255.255.255.0
    Active sAs: 0, origin: card crypto

    SH crypto ipsec his

    Interface: FastEthernet0/0
    Tag crypto map: VPN_TO_PIX, local addr A.A.A.A

    protégé of the vrf: (none)
    local ident (addr, mask, prot, port): (192.168.2.0/255.255.255.0/0/0)
    Remote ident (addr, mask, prot, port): (10.10.0.0/255.255.255.0/0/0)
    current_peer 190.111.31.129 port 500
    LICENCE, flags is {origin_is_acl},
    #pkts program: encrypt 0, #pkts: 0, #pkts digest: 0
    #pkts decaps: 0, #pkts decrypt: 0, #pkts check: 0
    compressed #pkts: 0, unzipped #pkts: 0
    #pkts uncompressed: 0, #pkts compr. has failed: 0
    #pkts not unpacked: 0, #pkts decompress failed: 0
    Errors #send 0, #recv 0 errors

    local crypto endpt. : 190.120.2.82, remote Start crypto. : 190.111.31.129
    Path mtu 1500, ip mtu 1500
    current outbound SPI: 0x0 (0)

    SAS of the esp on arrival:

    the arrival ah sas:

    SAS of the CFP on arrival:

    outgoing esp sas:

    outgoing ah sas:

    outgoing CFP sas:

    Any ideas, why is not made connection?, maybe a license restriction?

    Help, please.

    Best regards

    ASA pre-shared key is not configured through the command "isakmp crypto key.

    It would be by virtue of the following:

    IPSec-attributes tunnel-Group B.B.B.B

    pre-shared key

    On the router, NAT exemption access list is incorrect. The following ACL:

    access-list 111 deny ip 10.10.0.0 0.0.0.255 192.168.2.0 0.0.0.255
    access-list 111 allow ip 10.10.0.0 0.0.0.255 any

    Need to replace:

    access-list 111 deny ip 192.168.2.0 0.0.0.255 10.10.0.0 0.0.0.255
    access-list 111 permit ip 192.168.2.0 0.0.0.255 any

    Then the 'ip nat inside' and 'ip nat outside' is the reverse. You have configured the following:

    interface FastEthernet0/0
    IP nat inside

    interface FastEthernet0/1
    NAT outside IP

    It must be as follows:

    interface FastEthernet0/0
    NAT outside IP

    interface FastEthernet0/1
    IP nat inside

  • VPN Cisco IPSEC - ISAKMP id_connexion

    Hi Experts,

    We have a site to site VPN IPSEC between a router Cisco 1801 and 800F fortigate firewall.

    Works VPN, but a quesiton that I are just Conn Isakmp id changes very frequently and I wanted to just make sure that I understood why.

    When I run the isakmp crypto to show its command, I get the following:

    IPv4 Crypto ISAKMP Security Association
    DST CBC conn-State id
    1.2.3.4 5.6.7.8 QM_IDLE 2455 ACTIVE
    1.2.3.4 5.6.7.8 2454 MM_NO_STATE ACTIVE (deleted)

    In the time it took me to write this, it has changed:

    IPv4 Crypto ISAKMP Security Association
    DST CBC conn-State id
    1.2.3.4 5.6.7.8 QM_IDLE 2457 ACTIVE
    1.2.3.4 5.6.7.8 2456 MM_NO_STATE ACTIVE (deleted)
    1.2.3.4 5.6.7.8 2455 MM_NO_STATE ACTIVE (deleted)

    So, for me it looks like the phase ISKAMP 1 re-lance his SA very frequently. I put the ISAKMP policy as follows:


    World IKE policy
    Priority protection Suite 10
    encryption algorithm: three key triple a
    hash algorithm: Message Digest 5
    authentication method: pre-shared Key
    Diffie-Hellman group: #5 (1536 bit)
    lifetime: 86400 seconds, no volume lim
    it

    Therefore, should - that means that the Phase 1 SA should only re-iniate 86400 seconds?

    Any information would be appreciated,

    Thank you very much

    Jonathan

    Hello

    It seems you have DPD (isakmp crypto KeepAlive) configured on your router.  This determines the accessibility of the other VPN endpoint, and we are not to understand thanks for the packages "R U THERE" (due to the problem of the DOI) that we send them, ISAKMP marks the tunnel as death and tears down.

    Traffic on the tunnel seems so the tunnels, and then DPD expires them again.

    Flip through your configuration for the "keepalive" order and if it is set for periodicals, set the KeepAlive for 'on demand' (which should be the default) so that we only send DPD when we are unable to determine whether the tunnel is alive because no traffic is coming on it.

    This doc link is old, but he describes the functionality well enough:

    http://www.Cisco.com/en/us/docs/iOS/12_3t/12_3t7/feature/guide/gtdpmo.html

    -Jason

  • Disable the default ISAKMP policy?

    Y at - there no way to disable or change the default ISAKMP policy?  I created the number 20 of the police, which is used in a VPN site-to site in vain for a quarterly PCI analysis the results come back in due to stage successful 1 authentication with encryption DES/DH768.  I reproduce these results with the help of ike-scan with explicit parameters OF/DH768.

    This is a 2600 router and I just upgraded to 12.4 IOS (23) because I came across (http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_c4.html) Cisco documentation which says that 12.4 (20) introduced the "no crypto isakmp default policy" - but I do not see this command still available to me.  Here are the results of sh crypto isakmp policy:

    Priority protection suite 20

    encryption algorithm: three key triple a

    hash algorithm: Secure Hash Standard

    authentication method: pre-shared Key

    Diffie-Hellman group: #2 (1024 bits)

    lifetime: 86400 seconds, no volume limit

    Default protection suite

    encryption algorithm: - Data Encryption STANDARD (56-bit keys).

    hash algorithm: Secure Hash Standard

    authentication method: Rivest-Shamir-Adleman Signature

    Diffie-Hellman group: #1 (768 bits)

    lifetime: 86400 seconds, no volume limit

    Any help would be greatly appreciated!

    Hello Anthony,.

    I saw the link you provided.  It seems that this command was introduced in12.4 (20), T... note the T.  This indicates that it is only in the T-train train or technology and only seen in some other 12.4 T code or the train from 15.x newert.

    You say that your router is runnign 12.4 (23) implicitly code Mainline (M).

    The last T code for 2600 seems to be a 12.4 (15) T, so it does seem that you can enable this feature in order to disable the default policies.  It also seems that the 2600 series retired as no new code is released March 27, 2010.

    http://www.Cisco.com/en/us/products/HW/routers/ps259/prod_eol_notices_list.html

    Looks like you can be out of luck and may need to look for in buying a newer model router to get the newest software support and the ability to disable the default isakmp suite.

    Of course, it is noted that while they can establish a session ISKMP, however, they will really be authenticated by the router in message MM 5 as most people use internal cases for certificates on the VPN.

    I hope this helps.

    Kind regards

    Craig

Maybe you are looking for

  • Firefox randomly opens an existing page in a new window

    I opened Firefox without problem - it opens all my existing tabs. When I choose a tab and move the cursor on a page (no key) Firefox will be random (not always) open this page in a new window. VERY annoying!

  • I have a HP envy j000 and I installed an SSD.

    I have a HP envy j000 and I installed an SSD. If I look at MYPC, it doesn't have the installed ssd. If I look at the Device Manager it shows the installed ssd. What's new?

  • ITunes game will not download

    I'm on an Air of Ipad with 3 GB of free space and itunes game account. I know how to download music as I did it not. I am 100% online that I can browse tweet and send this message... the cloud with the down arrow appears next to my albums. I clicked

  • Output of the application using the event structures

    Hello In my project I used event structure that works well. Now I want to exit (close) demand when I press the EXIT button on the front. Here, I joined my project as an indication. Concerning Hari

  • HP HDX18 1005EA

    Can my laptop evolve USP 2.0 to 3.0?