want to 15k210ne: Hp envy 15k210ne screen update?

Similar Questions

• Satellite P300 PSPCCE: I want to delete or chang splash screen at startup

  I have laptop Satellite P300 PSPCCE and that you want to remove or change home screen starts to start the laptop.

  Is it possible to do? My Bios version is v3, 40

  Hello

  What you want to change?
  As far as I know, you can change the option of quick start or normal startup.
  Anything else is not possible.

  PS: this option should be available in the BIOS settings.

  Welcome them

• I don't want to El Capitan, but need to update Safari - what to do?

  I don't want to El Capitan, but need to update Safari - what to do?

  Are you still running a power PC and Tiger?

  No upgrade for you.

• Computer is stuck on the screen updates

  You just bought a Dell desktop computer new with Windows 7 64 bit installed.  Fired all my files, pictures, etc installed printers, scanner. Now 2 days later, I hit restart and a screen pops up saying update 42 55 it stuck there.  After 10 hours, I tried to restart and got the same screen.  I then tried to reboot in safe mode using the F8 key, this does not work either.  Then, I turned off the machine and tried to restart with the rescue disk, I created the day I got the machine.  Just, it goes back to the screen updating and is sitting there with the small circle twirling away!  How can I solve this problem?

  When the first system boot, before Windows loads (the first thing that appears when Windows starts to load is the update progress screen), there should be a page that tells you what button to push to access the settings configuration (Setup) or start-up.

  Make sure there is no Dell page appear when the system first boots , which shows the key you need to press to enter the boot or configuration setttings?

  Since you have No message from the system model that I asked, tried by pressing the F2 key when you turn on the system.

  If the update progress screen appears instead of the startup configuration, shut down, reboot and try the F10 key.

  If none of these keys work, then you will need to contact Dell.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• my envy touchsmart screen is sideways

  My Envy Touchsmart screen is on the side... When I re-start, it always is sideway. When I went on the forum was not seen anyone who had the question displayed.

  Hello

  Try to press and hold the Ctrl and alt keys, then press the arrow upward.

  Kind regards

  DP - K

• WANT n107na: HP ENVY latest BIOS update messed up my HDMI port

  I had a message of support center app updated to the latest version of the BIOS I did 30 minutes ago and my second screen was working fine. After that I have updated BIOS my HDMI port does not recognize this second screen at all, what I do is just not responding. Any help would be much appreciated as I need this second screen as soon as possible.

  Thank you

  Hi @Draganche,

  Welcome to the HP Forums! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP "First Time here? Learn how to publish and more'.

  Thank you for posting. I read your post and I understand that after you update the BIOS, your HDMI port does not recognize the second monitor any longer. I want to help you with this question.

  What is the version of your BIOS in Device Manager?

  Is - this version F.25 Rev.A?

  If not, please update your BIOS again.

  Also, update your chipset driver and the graphic and audio driver.

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-17-N100-notebook-PC/8499288/model/8903915

  Turn off your laptop and monitor. Connect with a HDMI cable and turn on the laptop and check again.

  I would like to know if this time it works.

  Click the 'Thumbs Up' to say thank you. Click on "Accept as a Solution" If the problem has been resolved.

  Kind regards

• ENVY dv6 - 7373ca: update BIOS WANT dv6

  Hello

  After I managed to remove the two "unknown device" - entered the W10 Device Manager clean install thanks to this forum, I tried to upgrade to the BIOSVersion F.2D Rev a dated August 26, 2014 and listed under Windows 8 (sp68425.exe) which, according to the note, HP recommends highly.

  As I was not sure if this update would work under W10, I first tried the method described (HP Notebook PC - updated BIOS) with the opening of the menu equipment Diagnostics UEFI immediately by pressing the ESC key several times, once per second, until the Boot Menu is displayed and then pressing the F2 key. But unfortunately on the HP PC Hardware Diagnostics UEFI screen of my ' WANT dv6 - 7373ca "there are only four options (1. Memory test, 2. Hard drive test, 3. Language, 4. Exit) and no option called 'Firmware Management' or 'BIOS '. Because I would have preferred a BIOS update without starting the Windows operating system, is there something I can add this missing option menu Hardware Diagnostics UEFI?

  So I took the chance to run this BIOS file "sp68425.exe" in Windows 10 and everything seemed to work fine except the error message short after the new throw about 1 or 2 seconds that an error has been discovered, which needs to be solved and a percentage that was happening 100% before 10 of Windows start still.

  Now, everything seems to work ok: I can access the BIOS again much easier than the old BIOS dating sometime in 2012, I can boot Windows 10 without any error message longer, I can restore my WindowsImageBackups using the repair-CD as well as well as the SystemRestoreDrive I had both created on Windows 10. And the new BIOS version number and date are displayed under the W10 and also after the start systeminfo pressing keys ESC and F1. Is there anything else I can do to check the correct functioning of the BIOS?

  Concerning

  Seek and you will find what I found, it was supposed to be the latest version of "HP PC Hardware Diagnostics UEFI" (v. 5.9.0.0) I installed immediately on the UEFI System Partition to update the old one in my laptop (c. 1.6.0.0). This provided the desired options '-update BIOS "and"BIOS-Rollback"after pressing the F2 key without having to start Windows or if this does ' t OS start.

• HP ENVY 5530 screen stuck with message 'check' product update

  HP ENVY 5530 has worked very well since July 2014, but September 17, I noticed that the screen of the printer is reading 'check' the product update and is hanging there... I can still print, but will not erase the screen on the printer. It seems to be hung while trying to check for product updates. How can I erase it and get the printer to complete successfully the task of verification of updates?

  Solved my problem.

  That's what I did:

  uninstalled all the software associated with the envy of 5530.

  Unplug the power cord from the wall and the printer.

  Unplug the USB cable from the printer.

  Downloaded the latest version of the software for the 5530 like from the HP website.

  Installed the software.

  Plugged the power cord to the wall and printer.

  THIS PART IS IMPORTANT > lifted the top of the printer to expose the inside of the printer where the ink cartridges. This stage caused the error message to delete the printer screen.

  Then I plugged the USB cable into the printer and the PC and the printer took over the installation of software and drivers.

  Now the printer is in working condition.

  NOTE: After it was over. I saw on the screen of the printer that a product upgrade has been active and completed successfully.

  HOPE THIS HELPS.

• My HP Envy touch screen has stopped working after an update of the HP Bios yesterday

  Can someone tell me please how to fix my touch screen. I got an HP BIOS update which caused my touch screen to stop working. I tried to re - calibrate the it, but it does not accept my contact telling me that the screen is no longer enabled.

  I tried to find where to turn them on and couldn't find where to enable touch of the finger. I also tried looking for driver updates and driver seems to be up-to-date.

  Thank you

  I have another type of TouchSmart, but this may work for you:

  1. Press Windows + X logo (if you are using a Windows computer 8 - If Windows 7, click the Start button, type Device Manager and click on Device Manager in the results of research).
  2. Select Device Manager from the list.
  3. Click on the small arrow next to Interface devices to expand the list.
  4. Click the touchscreen driver (in my case, Voltron NextWindow touch screen).
  5. Right click and select Activate from the list.
  6. Click Yes if a dialog box asks if you are sure you want to activate the touch screen driver.

  On some models, it is unclear which device in the checklist of the touch screen. I read in other posts that some people have solved the problem by disabling and then re-enabling each device.

  If this does not work, you could try to go to hp.com (http://www8.hp.com/us/en/support-drivers.html) and click on driver downloads &.
  In the search field, enter your product name or number, and then click OK. Select your operating system from the drop down list under Select your operating system, and then click Next. If there is no graphic driver available under Select a download below, click on the plus sign next to the driver - graphics, and then click the name of the driver. In the information and download options window, click Download. Follow the instructions on the screen to download the driver. Restart the computer.

• Laptop HP ENVY 15-AH151sa: updated my new laptop Win10

  According to my HP Support Assistant earlier today, there was no updates that I need to install but then I had an interesting development.

  I accidentally clicked on my desk and saw a menu here. At the top was a link to AMD Catalyst Control Center, and from there, I updated my driver AMD. Move the screen now appears to be much better and I have more problems with my cursor is jumping around.

  The disadvantages are

  (1) I think that it has installed software to follow me and sent me things I don't want - ads, etc. There are plenty of games AMD announcements. I had to click "send me your stuff ' to continue the installation.

  (2) it has installed a program called M that WinPatrol alerted me. I had to accept such would not continue with the installation.

  (3) it installed MS Visual C++ 2013. I always leave MS comes out / update these. I can't understand why the AMD has installed and wonder if the next MU will change.

  So my question is why HP say does not need to update anything?

  I think this reinforces my another question here

  PS * beep *. An exclamation appeared on my HP Support Assistant icon. OFF to check something else struck dead.

  New Envy 15-AH151sa
  More old Compaq Presario CQ71-320SA screwed up by free upgrade from Microsoft of Win7 for Win10

  Taffy0872014

  You must run the tool clean AMD as it removes the video drivers.  You will not be able to install drivers to work up to what after the old ones are picked.

  That page is for your MODEL of PC, not for your specific PC, and this list is not for all of the software drivers for this model, updates for your PC.

  You should go to the page in the link and download the new HP Support Assistant: HP Support Assistant. HP® Official Site

  Good luck

• Envy 15-k220nr: updated Intel 3160 AC card card Intel 7260 AC?

  Hi-

  I'm in the same boat as some other people and try to get the clearer a possible answer, before I move forward - I have a HP Envy 15 k220nr supplied with the intel 3160 1 x 1 AC card.  I want to spend at least an AC 2 x 2 card, if this isn't a 3 x 3, to get the best possible rates of my AC1900 router.  The safest bet on the outside using a USB 3.0 adapter external (which would be cumbersome and problematic) seems to be the Intel 7260 AC 2 x 2 card.

  Does anyone do this?  He settled without much trouble?  It worked once installed?  Have you seen a significant difference in speed?  No problem with the new card?  Tips for the installation?  Have been able to confirm the K220NR you had two sons of internal antenna to support a card 2 x 2 (or, and I doubt that I have this chance, it has 3 antennas)?  Please let us know - I want to upgrade, but to be sure it will work above all order and completely disassemble the laptop again (I already did once to install a 500 GB Samsung 850 EVO SSD and there wasn't a ton of fun).

  Also, to you or anyone else to pay attention, because I'm going to open the laptop anyway, is there a reason I shouldn't update the RAM at the same time?   It seems that the laptop supports the DDR3L 1600 ram; I think the upgrade from 8 GB to 16 GB - any anticipated problems with this, everything will work the RAM or is there a white list, is there a reason I should avoid it (above the RAM being the most difficult thing to access during dismantlement of this model)?

  Any help, assistance, information on how it worked for you, things to watch, etc. would be much appreciated.  I look forward to answers to the questions, that I have not like or thoughts in general about this.  Thank you!

  -Dan

  HP Envy 15-k220NR

  Intel i7 4720MQ

  8 GB RAM

  500 GB Samsung SSD 850 Evo

  I can now confirm that the adapter Intel Wireless AC7260 sector works PERFECTLY in a HP Envy 15t, specifically an HP Envy 15-k220nr (4720MQ plant, 8 GB of Ram, Intel i7 installed Intel Wireless 3160 adapter).  It works with Windows Pro 10 x 64 great - I can't speak for Windows 7/8/8.1 that I updated before installing (which I recommend), but I expect that it works on Windows 8/8.1 for sure and probably on Windows 7 without problem.

  I bought the card on Amazon; the model is "Intel network 7260.HMWG. R' - the. R is important because it is a revised version of the chip with improvements on the original.  It is, by the Intel reports, the same card SKU 7260.HMWWB. R - different SKUS simply represent different packages.  Check it out at: http://www.amazon.com/gp/product/B00MV3N7UO

  At the time I did, the cost of the card was $26.50.  It is a Mini PCIe card, which is the type of the computer used.

  It's a surprisingly simple upgrade.  I have simply shut down my computer, which has been already upgraded to Windows Pro 10.  As with all facilities, follow control measures for static (white room, wrist band), that screws follow-up go where (easier in this case because they are mostly identifcal when disassembly of the machine) and general practices for the maintenance of a system.  I would not recommend this upgrade is done by an amateur - it's a more complex installation, since you need to access the motherboard and remove the housing rather than simply to open a port on the underside of the computer.  That said, for having to open the base unit, it is a process very easy (relatively speaking) with this laptop.  It is useful that the repair is very complete.  Be careful, because if you are not an authorized service provider and your computer is under warranty, you may void your warranty by opening the machine.  In addition, don't forget to keep the old card to allow you to reinstall and restore your computer to care factor if you need to send in warranty repair or want to sell it but keep the new card.

  It took my about 20 minutes to take it apart, install, test and go back.  Before you BEGIN, download the new drivers, you'll need - HP drivers are working, great and I always go with the current manufacturer on the OEM drivers drivers when possible because they are often optimized for the system.  You can also download download.intel.com drivers, but I would recommend get the driver WLAN wireless network current HP download page (http://support.hp.com/us-en/drivers/selfservice/HP-ENVY-15-Notebook-PC-series/7527530/model/7685078#Z7_3054ICK0KGTE30AQO5O3KA30R1).  This card, looking for the same drivers regarding the AC-3160 card because they use the same drivers.  Download the TWO the WLAN and Bluetooth drivers - to date, the drivers have been updated on 15/10/15 and are:

  • Bluetooth of Intel driver, version 18.1.1525.1470 [email protected]
  • Intel Wireless Driver, version 18.12.0.3 Rev.P

  After downloading the drivers, put them on your desktop or somewhere else easy access that you will need them as soon as you restart the installation and the wireless NOT work initially, following so if you do not have the drivers you have given to get them through a wired connection or another computer.

  I disassembled the machine by the Service Manual (http://h10032.www1.hp.com/ctg/Manual/c04510889).  Remove the battery and basic housing, disconnect the cables in water for the fingerprint sensor, the mouse and the keyboard and back on top of the basic coverage and put it against the monitor.  BE CAREFUL - this shifts the center of gravity of the computer and makes the computer to tip backward as I learned when I got mine from flipping back off of the table, I was working on - just be careful.

  After opening to the top of the enclosure, installation is incredibly simple.  The WLAN card is located at the back of the computer to the Middle - back where the hinges of the screen connect computer, centered between them.  You just pop off the two wireless antennas (YES - this laptop, despite the expedition with AC only 1 x 1 wireless card options, IT has two antennas installed at the factory, so it can support fully a card 2 x 2), then remove the screw from the card in place.  The map is displayed; bring him back (help little fingers - I have big hands and it was difficult because card is pressed against the back of the case) and pop out.  Insert the new card, tap it down, screw and reattach the antennas, making sure that the wire connected to the 'hand' on the original card is connected to the 'hand' on the new map, and the wire of "to THE" relates to "to THE.  On my computer, the black wire is the main antenna, the gray wire was the second antenna.

  If you're like me, after installation, you can set reconnect the keyboard/mouse/finger print sensor and reboot the machine before screwing everything together to make sure it works.   Just be careful if you do this.  When you restart, wireless will not work.  Run the installation programs for the drivers that you downloaded at the beginning of the year - I found install the dirver wireless, then bluetooth driver works better.  After installation and reboot, everything should work fine, including bluetooth.  I have had absolutely no problem with everything to work.

  Now the fun part: performance.  The map is hands down more quickly then the motherboard.  2 x 2 MIMO broadcast practically double your performance to download (assuming you have at least to AC1200 router that supports speeds of that card is).  I use an ASUS AC1900 RT-AC68U, a great router is worth every penny.  Speedtest.NET, my laptop on the wireless now easily continues with my internet service 60MBPS, going as fast as my wired connection (with the old card, he maxed out at around download 50MBPS; with the new card, it uses bandwidth full, closer to 70MBPS for us.)  Download speeds were around 4, 5-5 Mbps, to be expected in view of our internet service.

  File transfers are literally about twice as fast as prerequisites for the upgrade.  I supported sustained more than 8 Mbps download speeds when there are about 40 feet from the router with 3 walls and other elements of the way.  File transfer speeds are great, more 40MBPS transferring files to my NAS, compared to close to 20 with the original map (also from 40 feet with 3 walls and other obstacles).

  Overall, the performance is much better that the original card, as expected, the installation is simple and quick, and everything works perfectly.  I highly recommend this upgrade.

• No "sign in" option shown on the home screen updated, what now?

  Latest updates of microsoft stopped Firefox on my computer, (error 404) but I managed to find a way to update, but I now have a screen of firefox with google as my search engine, but there is no place on the home screen that allows me to connect to my google account.
  How I solve this problem, please.
  Basic instructions would be appreciated, because I'm not very computer savvy.

  Maybe it's the built-in Firefox homepage? On this page, the address bar does not show an address, just the phrase search for or type the address. Although the page displays a related Google search box, it is not a page of Google.

  If you go to the Google home page and it has the controls you want, you can make as your homepage. These articles have more information on the way in which:

  • Startup, homepage, tabs and download settings
  • How to set the home page

  If this does not work or does not stick, you may have an add-on or an external program which is the substitution of your preference. Please post back for more on this.

• Envy 15-j104el: updated NETWORK WiFi card and RAM update

  Goodmorning to everyone

  I write this post to ask for information on the possibility to do an upgrade of hardware on my HP Envy 15-j104elsystem.

  That's what I would do:

  -Replace the network card (NIC) to a wireless better and possibly with a compatible AC NIC.

  -Update to 16 GB of ram, put benches with CL9 SODIMM

  The questions that I want to bring to your attention are:

  -There is a 'white list' for the wifi card on my BIOS (actually F66)?
  (consultation with the service manual there are little NIC OEM selled, y at - it ONLY compatible?)

  -Put the sticks of ram CL9 (instead of CL11 currently OEM mounted), I can inprove the overall performance?

  I want to install are:

  -Intel Wireless-AC 7260 more Bluethoot HMC 4.0

  
  -Kingston HyperX Impact DDR3L 16 GB (2x8gb) SODIMM 1600 Mhz CL9 (Kit)

  According to your experiences, is it compatible? I can buy them without any problem?

  Thanks in advance to anyone who can help me. Thanks for your suggestions

  In particular, I take this opportunity to greet and also need the help of my friend @visruth ;)

  1. no whitelist. Your laptop was conducted after HP stopped using a white list so that you can install any card with the right form factor and the number of antennas. The Intel 7260 card should work.

  2. you can install the CL9 memory but it will not do anything all run faster. The motherboard is made to operate at the speed of the OEM memory so the Kingston Hyper-X will work, but the specifications of it in operation will be the same as memory OEM.

• Want X 360: Gray locked background screen

  Hello

  I just got my HP Envy for 10 days and a major issue occurred. "Standby mode", when I try to go back, in a double gray screen appears. I can not escape to, or click on my mouse. It is stuck in this mode until I press the power button and then off. Then I can log in and everything is normal.

  Do you know what is causing this problem?

  Thanks in advance for your time.

  I found a solution to this problem and it refers to the HD Graphics520 Adpater and update the driver.

  Go to settings then to the devices, and then click devices in the left panel. Then click on Device Manager on the central panel (at the bottom will provide 3 choices and one of them is a link to manel device). Look for the option for image maps, expand this option and it will list your graphics card. In my case, it is Intel(r) HD Graphics 520. Click on that and then click on the driver to the top of the page. Then click on set to update driver.

  It worked for me. I believe that this question satarted when you try to install and update for free HD [CIH 520 and it failed!]

• HP Envy 14-J009tx: updating the Nvidia driver is blocked?

  So, I bought this laptop last month, and I tried updating the Nvidia graphics driver for the last of the 347.52 version supplied with it. I opened the GeForce experience app to update, it tells me that it is impossible to connect to Nvidia. Not still even though I changed my home network to the endearing phone, it won't let me update, saying that it cannot connect to Nvidia and I should try again later. I also checked the firewall and AVG (I changed the antivirus immediately after purchase) and allows the application to access the internet.

  So my question is: is it done deliberately by HP or there may be something wrong with the whole of my ISP? And besides, I am interested in upgrading to Windows 10, will there be any problem with all the app that requires Nvidia? I really need the graphics I want to do a lot of CAD in the future.

  Thanks in advance.

  Hello MalvinVVV ;
  
  Let me welcome you on the HP forums!
  
  I read your post on Nvidia driver update and I wanted to help.
  
  It's generally a BAD idea to update the video drivers laptop NVIDIA (or AMD) because the OEM manufacturers often use specialized versions of video chipsets for which these pilots are not suitable.  The best approach is to update only from the OEM drivers.

  This link is to HP for your PC product page: http://support.hp.com/sg-en/product/HP-ENVY-14-Notebook-PC-series/7771343/model/8524508/drivers

  If you press the check now button, he will see if there is new video HP drivers for your PC, download and install them.  If there is no newer drivers, I would leave it alone.

  In addition, I checked the same page to see if there are drivers HP Win10 and there are.  So, if you decide to upgrade to Win10, you will be able to get drivers HP.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.