When Photoshop cut off someones index

Similar Questions

• Computer runs slowly, and cut off when I watch or listen to the music or video

  My computer is HP Windows Vista - office computer.  My computer runs slowly, and cut off when I watch or listen to any video or music.  I tried restore, to restore all the drivers for the original version (but did not offer the video card) and all I could think to do.  My computer will not be completely updated anything - I think that my video card is bad.  What can I do?  inexpensive if possible preference.  Thank you!

  Hello Deedahday,

  Thanks for posting on the Community Forums of Microsoft Vista.

  This problem may occur because of many factors. Follow the steps below; It could help us solve the problem.

  Access the link below and follow the steps to optimize Windows Vista for better performance.
  http://windowshelp.Microsoft.com/Windows/en-us/help/83EC0FFE-EE04-4D53-8B87-25D1F05C954E1033.mspx

  Try to update display drivers:
  Try to access the computer manufacturer's website and select the model of your computer and download the latest drivers to screen for your computer and install the same.
  Access the link to download the drivers from the manufacturer of the computer: http://www.hp.com/#Support

  Also set the virtual memory of the system managed size:
  a. click the Start button and access control panel
  b. click on system and Maintenance
  c. click System.
  d. in the left pane, click Advanced system settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  e. on the Advanced tab, under performance, click settings.
  f. click on the Advanced tab, and then under virtual memory, click on change.
  g. Select 'Size of system managed' and click on Set.
  h. click on apply and Ok.

  Restart the computer and check if it works very well.

  It will be useful.

  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Audio is cut off when the USB 3 G modem is connected

  my audio piece is cut off when I insert usb 3g modem, what to do?

  When I plug my modem 3G usb, I'm connected to the net, but the audio output of the computer is turned off, even if I increase the volume to the limit max.

  Hi murugesannadar,

   

  His work was much earlier with 3G modem connected? If so, then what changes have been made prior to the issue?

  I suggest to try the resolution of the following issues with 3G modem connected and check if this may help.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  For more information follow the link below

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

• Appellants are cut off when leaving a voicemail message

  I'm having a problem when I call DID number of the person to the PSTN destination and record a message that is longer than 40 seconds, the audio is cut roughly the second 40 mark. If I call internally for an ip phone registration is not cut.

  I have several locations with centralized/CallManager unit on the host site. It seems only to happen now a remote location. When I call a DID and it sounds through the unit, I see that the port in monitor status of the unit said it saves the message and it allows me to leave a message up to 300 seconds without disconnecting me, however, when I go to listen to the audio message gets cut off after about 40 seconds. If I leave a voicemail to 60 seconds long, I'll hear the VM for 40 seconds and silence for another 20 and then I get the unit "If you want to save this message press 2,... ». If the unit is not cut me or I'm not get disconnected to the PSTN, just the audio destination stops. I can duplicate this every time.

  Here is some background info:

  -VM unit 4.0.2 only

  CallManager - 3.3.4sr2

  -TSP 7.0.2 (I think) I can check a second time if necessary.

  -2620XM gateway gateway router running IOS c2600-ipvoice - mz.123 - 14 T 3 .bin voice and communicate with CallManager use MGCP.

  -Calls come in the 2620XM router via ISDN PRI.

  I don't have the opportunity to reboot the router, servers CallManager or the unit still. I will start by restarting the router because it seems only to happen to this place, but I wanted to see if anyone out there has seen cela before or he could offer some advice.

  Thanks in advance for any information.

  you need this command in the rtr.

  No mgcp timer receive-rtcp

• I put a site with 2 rectangles (one above the other) in the footer and is cut off when I write the site

  The depth of the rectangle is fine when I view in muse but only cuts off when published

  Hello

  It is because of the text in the middle of the rectangle box (in HAND Master page), please increase its width, and then try to preview.

  Please take a look at the screenshot. I have it increased by 311 px and his work form me.

  Please take a look at the screenshot for better understanding.

  

  Concerning

  Vivek

• HP Deskjet Ink Advantage 4515: Photo cut off when printing, but only on glossy paper!

  Hello.

  Im trying to print 10 x 15 normal image.

  Whenever I try to print, that he cut and every time that different! That's what I did.

  1.) tried to connect the printer via the USB port. Did not work.

  2.) tried different programs to print. Did not work.

  3.) exchanged new original ink. Did not work.

  4.) tried different paper glossy. Did not work.

  5.) tried to use Scan Doktor.Didn't work.

  The only solution that worked was that I tried to print on paper 10 x 15 non-glossy while the image does not get cut off.

  As you the cann see the picture at the top is printed on the other side of glossy paper (not glossy side) and it worked fine. Just the quality is terrible.

  All the solutions for this? It would be great...

  Thank you

  Greetings

  

  In the paper here troubleshooting steps can help solve the glossy feeds does not correctly.  I would say that the cleaning rollers as shown in the solution of two.

• Cursor images are cut off 20%-80% of the height, has been very good in 34

  On our Web site, we have a slider with about 10 images that have always worked. Now, users who have installed the update of Firefox to 35.01 cannot see the full images. Instead, some images are cut off 20%-80% of the way down on the cursor, while others are intact and completely visible. Image size/type has no effect.

  Everyone knows this?

  Clear the cache and delete cookies only from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Satellite Pro A60 cuts off after 3 minutes

  Hello

  work in IT Support generates many puzzles, but I currently have a Satellite Pro A60 which cuts off after 3 minutes.
  I have deleted the main CPU fan and have noticed that the VGA Chip Set fan fails.

  It is not at all which makes me think that it is completely broken or there is a problem with the motherboard.
  Who is more likely and if not card mother, can I buy a VGA heatsink thermal elemnet / separate fan and if so what is the part number and ball park cost?

  Matthew

  Hello

  As you already suggested this strange faucet portable bottom may be related to high temperature and to overheating.
  You are right; the malfunction of the fan could be a reason to close automatically and sometimes down.

  > can I buy a VGA heatsink thermal elemnet / separate fan

  Usually, the cooling modules are pieces separately and can be replaced.
  But notebooks disassemble and replacement of cooling modules is not easy and a little more difficult for someone who has no experience and never changed something like that. It s just too risky, because this person may damage the motherboard very easily.

  So, it's probably best to contact the technician of specifications for these s replacements!
  The ASP can command the support of the head of Toshiba warehouse cooling modules and compatible and could replace it.

  Best wishes & congratulations buddy ;)

• Satellite Pro A100 PSAACE just cut off completely

  Everything was in working order last night. Today when I tried to use my laptop in the University, after awhile the laptop just cut off completely (not 'window stops', literally just cut off). At this point I noticed was the charge indicator not illuminated.

  So I checked that it was in the form correctly and everything was connected, who he was, but still no joy. I think it is maybe that my charger is dead on me.
  But I'm not positive, as when I remove the battery and reinsert it, the "power connection" comes on, even if the charge light.
  I could put my laptop then reinsert the battery, but it would be cut at random (probably because she have relatively no power left in it).

  Does anyone know if that means anything?
  When it is on, but not connected to a power supply when you move the battery icon... He thought it was still connected to a power source (if I had the power cord in or out of the laptop).

  Sorry if this seems obvious to some, just I would prefer not to buy a new charger to see that there is a problem with the socket on the back of my laptop, or a problem with the laptop battery etc. If you unplug your laptop, then remove and reinsert the battery, it lights the led "connection voltage?

  Hope to hear some reviews soon, that could help me cope with my laptop troubles.

  Thanks for reading,

  Dan

  Hello

  Simply put your laptop turns off automatically. Is this good?

  Well, for me it sounds a little like the laptop stopped automatically to prevent material damage due to a temperature high.
  Perhaps this was caused due to overheating.

  This can occurs if the modules of cooling don t work properly and can not cool with a maximum return. Generally, this is related to dust and debris blocking the cooling fans.

  This happened to me too many times there... I cleaned the cooling fan using a jet of compressed air and it helped.

  Maybe you should check this too...

  Welcome them

• LabVIEW 13.0f2 crashes when text cut of some free labels on the block diagram

  While reviewing the documentation of a VI, I faced a LabVIEW crash. I can reproduce it in LabVIEW 13.0f2 with the following code.  Can anyone confirm that the content 'def' Cup free label and trying to stick to the free label with "ghi" produce error 0xBC0BF185?

  I can't reproduce this problem by any other cut and paste between the free labels on the left side of the BD.  The accident occurred only when 'def' cutting and trying to stick to the "ghi".

  

  Hi all

  I looked into this, and it is more general than just the madness in the label. I dropped the CAR 442743 for this behavior. It's an accident that can occur when cut and paste text between the free labels in 2013 of LabVIEW with the disabled automatic tool. This is related to the CAR 408955 (deadlock occurs when deleting a comment with the automatic tool off) that has been corrected in the Patch of f1 2013 LabVIEW. This case was not covered by that fix and will be fixed in a later version.

  Thank you

  Jeff Peacock

  Product Support Engineer | LabVIEW R & D | National Instruments

• Cut-off for the 6008 analog input voltage

  I am using the analog inputs NI USB-6008.  The specification says they have a 144 k ohms input impedance.  But it does not say what is the cut-off voltage.  If you leave a disconnected and measure the voltage you will get 1.4 volts.  So I guess it's the cut-off voltage, but it is not spec'd.

  Someone agree that these Amnesty International isn't terminatied by 144 k - ohms to 1.4V?  Is this in the documentation somewhere?

  Figure 7 on page 16 of the NI USB-6008/6009 User Guide and specifications shows the strange input of this unit circuit.

  Lynn

  

• Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.

  Windows Media Player play about half of the clip, then the picture cuts off, the screen goes black, but audio continues to play.  Just reinstalled MP 11, same problem.

  Hello

  · What is the number and the model of the computer?

  · This occurs when you are working on any specific file format?

  · Were there any changes made on the computer?

  · You play the file in mode full screen?

  Change hardware acceleration

  a. you can try to change the hardware acceleration in the middle and check (you can try another level too.)

  b. right-click on a space empty on the desktop.

  c. go to the resolution of the screen.

  d. click Advanced settings, and then click the "troubleshooting."

  e. set hardware acceleration in the middle. (Here you'll get the only option your video card sound support).

  You can also check: you receive an error message of codec or audio plays video but does not play when you play media files in Windows Media Player 11: http://support.microsoft.com/kb/926373

• When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  original title: battery problem

  To all,

  When I cut my computer on it comes up telling me that the battery cannot be detected or displayed.

  I unplugged the battery taken power and put it back it, that did not work,

  The battery is fully charged and when I check the battery in the control panel for the strength of the battery, the system is telling me, it is fully charged and there is nothing wrong with my battery.

  Then I ask why I get this error when I start my computer.

  Can anyone help me on how can I do to fix it.

  Thank you

  Russell Froedge

  Hello

  Check with support from the manufacturer of their books online and the drivers and their forums system
  (as applicable) for known issues. Some manufacturer issued BIOS and other updates to help the battery
  problems.

  Control Panel control - plan change Options - power plans - power - advanced settings
  Parameters for the drainage and the use of parameters (this is how much to use and not how much or how)
  long to load).

  In fact, what causes a lot of wear on a battery empties it too low on several occasions. With today
  systems overload are not a problem.

  Here are some tips to help and troubleshoot battery issues.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Another good program

  Vista battery saver - free
  http://www.codeplex.com/vistabattery

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Manager of devices - Batteries - Double click on each item - drivers - tab
  Update the drivers (which can do nothing) - then do a right click and UNINSTALL each.
  RESTART which will update the driver stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Lose internet when I turn off printer (WUSB600N)

  I'm having a very strange problem.  When I turn off my Canon MX850 printer connected USB, I lose my internet connection.  I get this error message in my event viewer:

  Event type: WARNING
  Event source: Dhcp
  Event category: no
  Event ID: 1009
  Date: 11/03/2009
  Time: 12:11:55
  Description:
  A network error has occurred when trying to send a message. The error code is: a blocking operation was interrupted by a call to WSACancelBlockingCall.

  I am running Windows XP pro SP3 and my WUSB600N adapter is connected wireless to a Linksys WRT600N router.

  Someone has ideas of how solve this problem?

  Thank you!

  I solved this by uninstalling Linksys Wireless Network Monitor.  I no longer disconnect from the internet when I turn off a device USB or Firewire (ipod, canon mx850 printer, external hard drive).  However, by using the Automatic Configuration of Windows isn't a perfect solution.  The downside is that I frequently 2-5 second freeze ups in World of Warcraft with WZC, especially in combat.  So my solution is to stop the automatic configuration service once I started and have an internet connection.  This is quite annoying!

• Film shot using Windows Movie Maker in part cut off

  How is it when I discover the movie I burned onto a DVD using Windows Movie Maker, shows that half of the video? The other half of the screen/video is cut off, but during the editing process and preview, it shows all of the table. What I am doing wrong?

  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format to a folder on your hard drive and
  then import the file .avi in DVD Maker to create a DVD.

  (The following links should help explain how to record in DV - AVI)

  This image shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - profiles Publishing / qualities
  http://www.Papajohn.org/Vista-publishing.html

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

   
  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions