Windows 7 and HP Deskjet F380

Similar Questions

• Windows 7 and HP DeskJet 895Cxi

  I have a new laptop with Windows 7.

  I have a DeskJet 895Cxi printer.

  Before I'm going to hit out of confusion I have some simple questions (!) for everyone out there.

  Should I 32-bit or 64-bit of Windows 7? Or is it not important?

  The driver is already part of the operating system or should I download it?

  Driver version, you will need will depend on the version of Windows 7 you have *.  You can find it in start, Control Panel, system, system type (32 of 64) will be close to the Center, just below the amount of RAM.

  For the Deskjet 895 the correct driver will be delivered via Windows Update as described on this page.  Turn on Windows Update as shown in the second method, then you can simply connect the printer and Windows automatically installs the correct driver.

• Printing with windows 7 and HP Deskjet 710C

  I was able to load the driver for my HP Deskjet 710C printer but it won't print. It works with a different laptopwhich is also windows 7 but not this one. Help?

  Did you follow the course of HP to add the printer and the driver through windows update?

  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01874792&CC=UK&DLC=en&LC=en&os=4062&Product=59307&sw_lang=

  And if so if you clean the PC startup not him then to work, otherwise no error message?

• Windows 7 and HP deskjet 720C

  Hi, can anyone help please. Yesterday bought a new laptop with windows 7 installed. Installed the printer, said ok installed in Device Manager, but wont print. Thanks, Peetie

  Hello

  GoTo > departure orbit > open devices & Printers > right click on your printer > set as default printer

  also try this

  GoTo > departure orbit > open devices & Printers > right click on your printer > open properties > make a test print

  Kind regards

  EverWin

• DeskJet F380: F380 - solution centre message 'Cut' to print but scanner is connected and working.

  My Deskjet F380 worked well but now, I get an error message when you try to print. Scanner is connected and works fine. Solution Centre message appears "Deskjet F300 Series offline!". Convenience store simply said ' turn on the printer!

  Can someone help please! I can't understand that only printing is disabled!

  Hey @AncientPrinter,

  I see that you have some problems with printing from your PC to 10 Windows for Deskjet F380 all-in-one printer. I can help with that.

  Here's what we will do:

  1. If the printer is connected to your PC via a USB cable, remove it.
  2. In your search type in printers bar and open devices and printers.
  3. Right-click on your printer icon listed.
  4. Click on remove the instrument.
  5. Repeat for all other icons printer listed.
  6. If you have removed the USB cable and plug. If not, click Add a printer to add to the queue new print.

  At this point, you should be able to print. If you are unable to do so, the next thing to do would be to start printing and scanning doctor. You can find the Print and Scan Doctor by clicking on this link. It will be either allow you to print, it will provide you with a list of questions, he found. If it finds all he couldn't solve the problems then please let me know what those who are.

  Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

  If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

  If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

• HP Deskjet F380 printer shows "offline" and does not print.

  original title: have a HP Deskjet F380 printer stating 'offline' replaced new ink cartridge checked cable always in offline mode. Verified that the printer is not on the pause mode.

  Printer was working perfectly until I put in the new ink. Do check the cable (works well on a different printer). How can I get the printer to work again I'm using XP home. Checking the status of the printer and there is no tick etc. against the break point in the fax and Printers window.

  Hello

  Follow the steps in the link below and check if that helps.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02221706&tmp_task=solveCategory&cc=us&DLC=en&lang=en&LC=en&product=1128296#N71

• HP Deskjet F380 print really slow and ejects incomplete pages

  Hi, I have a HP Deskjet F380 all-in-one. It worked perfectly for months until this one day he started to have problems when printing. When I hit the button "print" the printer take too long to print and it is extremely slow, it prints a little then stops (20 seconds or more) then print more. Also my printer ejects often empty or incomplete pages. I tried different solutions. (1) uninstall/reinstall the driver for the printer 2) disable my firewall and antivirus
  4 reset the printer (unplug the printer power cord ecc..) 3) open the printer to check if there is something blocking the internal components 4) remove and reinstall the cartridges, clean the contacts of the cartridge and check the ink level 5) try using a different power supply from another HP printer. Nothing has fixed the problem. I ran HP print and Scan doctor but the test found no errors. I also tried to unplug the usb cord and print a self test page (press the button cancel + copy color button), but it won't work, so I have deduced that there is a problem with the printer and the questions were not related to my pc.
  I am running Windows 7 64 bit

  Any help is very appreciated!

  I solved the problem myself. The black ink cartridge was defective, I replaced it, and now my printer works perfectly!

• My Deskjet F380 printer will not scan after upgrade from XP to Windows 7 32 bit

  I have a HP printer Deskjet F380 (S) NC 73 NGZ14S which worked perfectly on Windows XP. Island re install software without disk original and well as the printer and copier are working the scanner is not. I have downloaded and run the Wizaedand that had this message "Full HP software is already installed, but the basic functionality pilots seem to be missing or configured incorrectly. Assistant and then went to "drivers for your printer are disabled click next to allow them to" clicked Next, and he returned to the previous message again. I have not installed the software on. Windows 7 but I don't know that my original HP software disk has not been used. Now must I UN install Windows 7 and re install from the HP website. I got another message in short while the HP site it says driver required WIA trawling. I'm not very experienced on the computer and would like your help thanks Mimosa

  Yes, I would uninstall the driver and software and then download the driver for Windows 7 and install it.

  Here are some instructions for uninstalling: uninstalling the printer software.

  You can download the driver here: Driver and software downloads.

• DeskJet f380 problem of driver for windows 7... need urgent help

  Hello, im the owner of a HP deskjet f380 and has used without problems in Windows xp, it is practically new, because I bought a couple of months. I had an update on my PC and installed Windows 7 to go with the new system, and now when I try to install the drivers for your site... those for Windows 7 32 bit, I get a weird error message telling me that I am using a bad system, WIndows XP, to be more precise. I have checked and rechecked my installation of windows and I'm sure it's Windows 7, so I don't understan why I got the message. I even tried to install the package XP, thinking that maybe that will work if Setup, my Windows is XP. It did not work eighter, I started recieveing a few errors 'file missing' of some .inf files and some .dll which are missing or cannot be accesed. The problem is quite urgent so if you can send me it please with the solution I would me more apriciative. Thank you.

  Hi Uuf11, the printer software installation is recommended in safe mode. Safe mode is primarily used to resolve problems with Windows by only running the bulk of Windows operating systems and device drivers. Once the passage in secure mode, the user can execute commands and charge the devices one at a time. So in this mode the print spooler service is not started which is essential for the installation of the software.

  As suggested steps to come to your question did not work, you can try the steps below:

  Note: The printer must not be connected to the computer before beginning the installation.

  (1) perform a disk cleanup. Start ==> All Programs ==> Accessories ==> System ==> Disk Cleanup tools

  (2) right click on the software driver that you downloaded and select "Run as" or "Run as Administrator". Enter the user name and password. This information is on your user profile on the computer.

  Note: Make sure that the driver that you downloaded is supported for the OS you are using. If you have doubts redownload the file.

  If the error persists, then:

  1) click on the Windows icon in the bottom left of the screen of the computer and in the 'search' in a box type, %Temp% and press enter on the keyboard. This will open the Temp folder

  (2) open the last file 7z

  (3) double-click the file hpzsetup.exe

• After that my virus clean my printer does not work I have windows xp and my printer Deskjet F 300 said

  After that a virus clean my printer HP Deskjet F 300 quit working they installed Windows XP from Windows 2000 and I can't make it work help

  "they have installed?  You had somebody "clean" your computer and they have also installed Windows XP (you used to have Windows 2000)?

  The first thing you need to do is to determine if 'they' a legitimate version of Windows XP installed.  Download and run the MGADiag tool.  If the tool does not report that Windows is "genuine", take back it the computer and demand that 'they' install an authentic version, paid Windows XP.  While they are at it, tell them to install a driver for your HP Deskjet F300.

  If you do not have a genuine version of Windows XP, then go to this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=228&lc=en&cc=us&dlc=en&sw_lang=&product=1128298
  You have several choices to this page.

  • The top line, which only says: 'Pilot' is the complete set of software including software HP's Photosmart printer drivers and the scanner of your Deskjet.  As the HP notes, this is a very large download, so if you want this package, you must have a high-speed Internet connection or order the CD.
  • The second line, which says "Driver - Product Installation software" includes the basic print and scan drivers.  HP has said, "not all product features are supported with this installation package."  I don't know what "features" are not supported if you choose this option.
  • It should not necessary the "Patch" because or the other of the first two downloads is dated after the patch and so should be included.  After things are installed, you can download and install the most recent of the 3 "Updates".

  When you wrote that the printer "will not work" after a new installation of Windows XP, I assume that the printer is not installed at all.  Just in case, however, previously, you use the package that you download from HP, follow the instructions here to clean all traces of a failed attempt to install it.  (Note: remember "Step 4".)  "Step 6" refers to the directions outlined in the upper part of this post.)

• have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  have windows 7 x 64 and hp deskjet 656c can not load the driver he keeps giving me error code 0 x 00000057 down

  Hello

  Please contact the Microsoft community. We will be happy to help you with your concern.

  According to the description, you can not install hp deskjet 656c driver you get error code 0x00000057c.

  How do you try to install the driver? Is it through the disc or via the site?

  Method 1: Use a troubleshooting tool to solve the problem:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: temporarily Disable the Antivirus and firewall and try to install

  Enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Try to install in the clean boot

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After installing windows update, follow step 3 in the link provided to return the computer to a Normal startupmode.

  Please follow these recommended steps, review the additional information provided and post back if you still have the problem. I will be happy to provide you with additional options.

• DeskJet F380 print only page 1 - only when the first powered

  I work under Windows 7. I checked the toner level - not low; cleaning cartridges does not help.  When the power is turned on, the first page prints ok, not strong. The following pages, it acts like it is printing but prints pages white, totally clean.

  Thanks for your suggestions.  I wonder if it's time for a new printer.

  Pablu

  Hi pablu,.

  Welcome to the HP Forums, I hope you enjoy your experience!
  
  I see you are having some problems printing with Deskjet F380.
  I'll be happy to help you.

  I would disable all the start up programs to make sure that something in the background is not cause printing problems.

  Go to start, run, type msconfig, click on the Services tab.
  Click to select the hide all Microsoft Services check box.
  Click Disable all.

  Click on the tab at the top of the page, select Disable all the startup, apply, OK and restart the computer.

  Temporary disable all Antivirus software.

  Then try to print again.

  You will need to go back and allow all when done and turn on the Antivirus software.

  Let me know how it goes and we'll go from there.

  Thanks for posting on the HP Forums.
  Good day.

• HP Deskjet F380 analysis does not correctly.

  Original title: Device HP Deskjet F380

  Hello

  When I scan a document, only 30% to 50% of the document is scanned. I don't know why. If I rescan it it can scan a whole page or can choose another 60% of the document and leave the rest in white.

  Hi TipuNaqvi,

  To provide the proper resolution, that I would need more information on your side.

  1. which version of the operating system are you using?

  2. do you receive any error messages?

  3. did you of recent changes on the computer before this problem?

  I suggest you try the procedure described in the article and see if it helps.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_rule=46845&tmp_task=solveCategory&cc=us&DLC=en&LC=en&product=1128296

  If the problem persists, I suggest you contact HP support for help.
  http://h30434.www3.HP.com/PSG/?category.ID=inkjet

  Hope this information helps. If you need additional help or information on Windows, I'll be happy to help you.

• DeskJet F380 diagnosis reports that I have to reinstall the software, but I already did twice.

  DeskJet F380 / Windows XP / previews of Scanner, but when I accept the preview, it does not complete the scan. I have reinstalled the legacy, installed all updates, but the diagnostic report indicates that I have to reinstall.

  Hello _Lois_

  Try the following procedure and let me know if something changes or if you encounter any problems. It will help to uninstall all printer software and should allow a clean install. This can solve the problem.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat6. Once the uninstall is complete, reboot the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  DeskJet F380 Software

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. run the L4uninstall.bat

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://get.Adobe.com/flashplayer/

  9 download drivers and full software features

  DeskJet F380 Software

  10. run the download to reinstall the printer

• DeskJet F380: Cannot remove the paper jam

  Printer all-in-one Deskjet F380 system Windows 7 Home Premium 64-bit:

  Aircraft paper jam and I removed paper from the front. Now, I can not reset or clear printing to work. Followed all the steps in the HP online support and it will print test sheets, but will not documents to printer, always indicating "paper jam" on the device.

  Hey @rpsguy,

  Very strange. The download works as I tried it on my system. Maybe it's a "glitch" in your Internet browser.

  Rather that running can I you select Save. If you see the option you just save the download on your desktop then it will be easy to find later. Once the download is complete, you should get the option to run it. If you see this race to success. An extraction will occur automatically. Once extraction is complete the installation window should open for you. Once you see the installation window you simply continue through the instructions on the screen to install your printer.

  If 'Save' the download doesn't download number, please click here to access the download page again. Once this page please right click on the file name and click on Save target under or Save the link under.

  

  Save a window opens now. Please save the download to your desktop. You can rename the download if you wish. Finally, click Save.

  

  Once the download is completed, you should get the pop up to run it. If you do not get this prompt once the download is complete, click on the download that has been saved on your desktop and select run when prompted.

  Please let me know if this procedure works for you. Good luck!